SEARCH · Engineering Papers
Results for “IRA”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Graphite Lithiation under Fast Charging Conditions: Atomistic Modeling Insights
The charging of lithium ion batteries in a fast and safe manner is critical for promoting the mass adoption of electric vehicles. Li intercalation in graphite electrodes is known to be one of the bottlenecks during the fast charging process. The mechanism of Li diffusion in highly polarized graphite anode at high current rates remains, however, not well understood. In this work, Density Functional Theory (DFT) calculations are used to gain insights into the Li diffusion process in graphite when it is far from equilibrium under fast charging conditions. The effect of uncompensated charges on Li mobility is determined in the highly polarized regions of the anode close to the interfaces. The extra charge was found to increase the interlayer spacing in the diffusion layer and adjacent channels, increasing the diffusivity and promoting the formation of Li clusters. A concerted diffusion mechanism at the edge of high-concentration Li domains is proposed to enhance the diffusion of Li.
Probing Electrolyte Influence on CO 2 Reduction in Aprotic Solvents
Selective CO 2 capture and electrochemical conversion are important tools in the fight against climate change. Industrially, CO 2 is captured using a variety of aprotic solvents due to their high CO 2 solubility. However, most research efforts on electrochemical CO 2 conversion use aqueous media and are plagued by competing hydrogen evolution reaction (HER) from water breakdown. Fortunately, aprotic solvents can circumvent HER, making it important to develop strategies that enable integrated CO 2 capture and conversion. However, the influence of ion solvation and solvent selection within nonaqueous electrolytes for efficient and selective CO 2 reduction is unclear. In this work, we show that the bulk solvation behavior within the nonaqueous electrolyte can control the CO2 reduction reaction and product distribution occurring at the catalyst-electrolyte interface. We study different tetrabutylammonium (TBA) salts in two electrolyte systems with glyme ethers (e.g., 1,2 dimethoxyethane or DME) and dimethyl sulfoxide (DMSO) as a low and high dielectric constant medium, respectively. Using spectroscopic tools, we quantify the fraction of ion pairs that forms within the electrolyte. Also, we show how ion pair formation is prevalent in DME and is dependent on the anion type. More importantly, we show that as ion pair formation decreases within the electrolyte, CO 2 current densities increase, and a higher CO Faradaic efficiency is observed at low overpotentials. Meanwhile, in an electrolyte medium where the ion pair fraction does not change with the anion type (such as in DMSO), a smaller influence of solvation is observed on CO 2 current densities and product distribution. By directly coupling bulk solvation to interfacial reactions and product distribution, we showcase the importance and utility of controlling the reaction microenvironment in tuning the electrocatalytic reaction pathways. Insights gained from this work will enable novel electrolyte designs for efficient and selective CO 2 conversion to desired fuels and chemicals.
Transition Metal Dissolution in Lithium-Ion Cells: A Piece of the Puzzle
Static leaching tests were performed using the chemically delithiated positive electrode materials, LiFePO 4 , LiCoO 2 , LiMn 2 O 4 , LiNiO 2 , and LiNi 0.8 Mn 0.1 Co 0.1 O 2 . Instead of the common electrolyte, which contains LiPF 6 , the solvent consisted of only ethylene carbonate (EC) and ethyl methyl carbonate (EMC), limiting the possible reactions to only those that depend on the solvent. The product liquids from these experiments showed that there were lithium-bearing species in common, such as Li(EC) + and Li(EMC) + . Interestingly, we found evidence of electrolyte degradation products in both the positive-and negative-ion mass spectral results. The positive-ion results showed that the products tended to coordinate to lithium. In conclusion, the negative-ion results showed that most of the products tended to complex with transition metals. It was difficult to discern which positive ion was associated with which negative ion.
How Fast Can a Li-Ion Battery Be Charged? Determination of Limiting Fast Charging Conditions
Fast-charge protocols that prevent lithium plating are needed to extend the life span of lithium-ion batteries. Here, we describe a simple experimental method to estimate the minimum charging time below which it is simply impossible to avoid plating at a given temperature. We demonstrate that, by gauging and correcting the ohmic drop that is intrinsic to reference electrodes, the local potential at the anode surface can be reasonably approximated. This finer anode control enables the determination of the maximum average rate at which lithium deposition can be mitigated, establishing realistic boundaries that can inform the development of advanced charging protocols.
Engineering the Si Anode Interface via Particle Surface Modification: Embedded Organic Carbonates Lead to Enhanced Performance
Si nanoparticles (SiNPs) are recognized as a promising anode material for next-generation high-energy lithium-ion batteries. However, due to the more stringent requirements resulting from severe volume change, the solid-electrolyte interphase (SEI) on SiNPs plays a critical role in determining their cycling performance. Engineering the interface for higher stability has become an effective yet challenging approach to accommodate the deterioration of the silicon anode from the repeated lithiation/delithiation process. Herein, we report a novel approach of engineering a covalently bonded organic monolayer of ethylene carbonates onto the surface of the SiNPs that can help form a sturdy SEI. Finally, this molecule-level surface modification provides an effective approach to enable high-energy lithium-ion batteries with Si anodes.
Transition-Metal Dissolution from NMC-Family Oxides: A Case Study
In this work we investigated the static reactions of highly delithiated Li(Ni 1/3 Mn 1/3 Co 1/3 )O 2 , Li(Ni 0.5 Mn 0.3 Co 0.2 )O 2 , Li(Ni 0.6 Mn 0.2 Co 0.2 )O 2 , and Li(Ni 0.8 Mn 0.1 Co 0.1 )O 2 positive electrodes with 2,3-butanedione and with tetrabutyl ammonium bifluoride as model leaching agents. In the bifluoride trials, it was found that [Ni] in the leachate was proportional to X Co ( X Ni ) 3 , where X M is the ideal stoichiometry in the bulk oxide, and inversely proportional to ( X Mn ) 2 ; [Mn] to X Co ( X Ni ); and [Co] to X Co . The relationships between metal concentrations and stoichiometry may indicate that nickel, as a next-nearest neighbor on the positive electrode surface, can make dissolution more favorable in some instances.
Stabilized Electrode/Electrolyte Interphase by a Saturated Ionic Liquid Electrolyte for High-Voltage NMC532/Si-Graphite Cells
Nonaqueous electrolyte has become one of the technical barriers in enabling Li-ion battery comprising of a high voltage cathode and high capacity anode. Here, we demonstrate a saturated piperidinum bis(fluorosulfonyl)imide ionic liquid (IL) with a LiFSI salt not only supports the redox reaction on the cathode at high voltages, but also shows exceptional kinetic stability on the lithiated anode as evidenced by its improved cycling performance in a NMC532/Si-graphite full cells cycled between 4.6 and 3.0 V. On the basis of the spectroscopic/microscopic analysis and molecular dynamics (MD) simulations, the superior performance of the cells is attributed to the formation of solid-electrolyte-interphase on both electrode as well as unique solvation structure where a deadlocked coordination network is established at the saturated state, which prevents transition metal dissolution into the electrolyte via a solvation process.
Chemical Interplay of Silicon and Graphite in a Composite Electrode in SEI Formation
In this study, we investigated the effect of the Si/graphite weight ratio in half-cells on the solid electrolyte interphase (SEI) layer's chemistry. The nominal concentrations of active materials were (wt % Si/wt % Gr) 15/73, 30/58, 60/28, and 80/0. The electrolyte in the cells consisted of either 1.2 M LiPF 6 in ethylene carbonate/ethyl methyl carbonate (3:7 by wt) or 1.2 M LiPF 6 in ethylene carbonate:ethyl methyl carbonate (3:7 by wt) + 10 wt % fluoroethylene carbonate. These coin cells were cycled five times at the C/10 rate. As expected, the addition of silicon to the electrode significantly increased the measured capacity. Examination of the aged composite material showed that the electrolyte influenced the concentration of chemical environments on the surface. Depth profiling revealed that these concentrations of surface environments changed with sputtering time. A statistics-of-mixtures model was used to deconvolute how silicon and graphite interacted during the formation of these species and how the interaction changed with depth.
Enabling High-Temperature and High-Voltage Lithium-Ion Battery Performance through a Novel Cathode Surface-Targeted Additive
We report lithium-ion batteries (LIBs) are being used in locations and applications never imagined when they were first conceived. To enable this broad range of applications, it has become necessary for LIBs to be stable to an ever broader range of conditions, including temperature and energy. Unfortunately, while negative electrodes have received a great deal of focus in electrolyte development, stabilization of positive electrodes remains an elusive target. Here, we report a novel additive that shows the ability to protect positive electrodes against elevated temperatures and voltages. This additive can be used in small quantities, and its targeted behavior allows it to remain functional in complex electrolyte packages. This can prove an effective approach to targeting specific aspects of cell performance.
Understanding the Effect of Cathode Composition on the Interface and Crosstalk in NMC/Si Full Cells
Crosstalk between the cathode and the anode in lithium-ion batteries has a great impact on performance, safety, and cycle lifetime. Still, no report exists for a systematic investigation on crosstalk behavior in silicon (Si)-based cells as a function of transition metal composition in cathodes. We studied the effect of crosstalk on degradation of Si-rich anodes in full cells with different cathodes having the same crystal structure but different transition metal compositions, such as LiNi 1/3 Mn 1/3 Co 1/3 O 2 (NM111), LiNi 0.5 Mn 0.3 Co 0.2 O 2 (NMC532), and LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811). We found that the transition metal composition in cathodes, especially Mn ion concentration, significantly affects electrolyte decomposition reactions, even from very early cycles. This change causes differences in the solid electrolyte interphase (SEI) chemistry of each aged Si sample. As a result, each of the aged Si samples has a different electrochemistry, in terms of initial Coulombic efficiency and the mechanism of capacity fade.
Exploring the Promise of Multifunctional “Zintl-Phase-Forming” Electrolytes for Si-Based Full Cells
Li-M-Si ternary Zintl phases have gained attention recently due to their high structural stability, which can improve the cycling stability compared to a bulk Si electrode. Adding multivalent cation salts (such as Mg 2+ and Ca 2+ ) in the electrolyte was proven to be a simple way to form Li-M-Si ternary phases in situ in Si-based Li-ion cells. To explore the promise of Zintl-phaseforming electrolytes, we systematically investigated their application in pouch cells via electrochemical and multiscale postmortem analysis. The introduction of multivalent cations, such as Mg 2+ , during charging can form Li x M y Si ternary phases. They can stabilize Si anions and reduce side reactions with electrolyte, improving the bulk stability. More importantly, Mg 2+ and Ca 2+ incorporate into interfacial side reactions and generate inorganic-rich solid- electrolyte interphase, thus enhancing the interfacial stability. Therefore, the full cells with Zintl-phase-forming electrolytes achieve higher capacity retentions at the C/3 rate after 100 cycles, compared to a baseline electrolyte. Additionally, strategies for mitigating the electrode-level fractures of Si were evaluated to make the best use of Zintl-phase-forming electrolytes. In conclusion, this work highlights the significance of synergistic impact of multifunctional additives to stabilize both bulk and interface chemistry in high-energy Si anode materials for Li-ion batteries.
Quantitative Analysis of Origin of Lithium Inventory Loss and Interface Evolution over Extended Fast Charge Aging in Li Ion Batteries
During the extreme fast charging (XFC) of lithium-ion batteries, lithium inventory loss (LLI) and reaction mechanisms at the anode/electrolyte interface are crucial factors in performance and safety. Determining the causes of LLI and quantifying them remain an essential challenge. We present mechanistic research on the evolution and interactions of aging mechanisms at the anode/electrolyte interface. We used NMC 532 /graphite pouch cells charged at rates of 1, 6, and 9 C up to 1000 cycles for our investigation. The cell components were characterized after cycling using electrochemical measurements, inductively coupled plasma optical emission spectroscopy, 7 Li solid-state nuclear magnetic resonance spectroscopy, and high-performance liquid chromatography/mass spectrometry. The results indicate that cells charged at 1 C exhibit no Li plating, and the increase of SEI thickness is the dominant source of the Li loss. In contrast, Li loss in cells charged at 9 C is related to the formation of the metallic plating layers (42%) the SEI layer (38.1%) and irreversible intercalation into the bulk graphite (19%). XPS analysis suggests that the charging rate has little influence on the evolution of SEI composition. The interactions between competing aging mechanisms were evaluated by a correlation analysis. In conclusion, the quantitative method established in this work provides a comprehensive analytical framework for understanding the synergistic coupling of anodic degradation mechanisms, forecasting SEI failure scenarios, and assessing the XFC lithium-ion battery capacity fade.
Comprehensive Insights into Nucleation, Autocatalytic Growth, and Stripping Efficiency for Lithium Plating in Full Cells
Synchrotron high-energy X-ray diffraction is used to enable nondestructive detection and quantification of heterogeneous lithium plating in working batteries. In this study a LiNi 0.5 Mn 0.3 Co 0.2 O 2 /graphite pouch cell was operated under 6C fast-charge rate for greater than 1200 cycles. The magnitude and spatial distribution of lithium plating, lithium stripping, and the effect of metallic lithium deposition on lithium intercalation into graphite were quantified. Fully intercalated graphite (LiC 6 ) was detected after discharge with a lateral distribution closely correlated with lithium plating, which can be used as a higher-sensitivity indicator for lithium plating. Over an extended cycle life, the overall metallic lithium concentration followed a sigmoidal curve indicating two-stage continuous nucleation and autocatalytic growth. The lithium stripping efficiency underwent an exponential decay as a function of cycle life as the buildup of metallic lithium hindered the efficient dissolution back into the electrolyte. The findings provide direct insights into the characteristics of lithium plating and stripping under realistic fast-charge conditions.
Significance of a Solid Electrolyte Interphase on Separation of Anode and Cathode Materials from Spent Li-Ion Batteries by Froth Flotation
The separation of electrode active materials from spent Li-ion batteries (LIBs) by froth flotation is challenging due to the changes in surface properties of electrode active materials from cycling as well as the presence of organic binders. In this work, the froth flotation separation of aged anode and cathode composite materials from spent LIBs was systematically investigated after the materials were heat treated. The results show that aged anode and cathode materials from spent LIBs can be well separated from each other after a heating process in air at 400 degrees C and at which some of the PVDF binder remains intact. The underlying mechanism was investigated by X-ray photoelectron spectroscopy (XPS), contact angle measurements, and scanning transmission electron microscopy (STEM) coupled with energy-dispersive X-ray spectroscopy (EDX). The results from the XPS and contact angle measurements show that there is a hydrophilic and oxygen-rich layer on the surface of aged anode materials. This hydrophilic surface, associated with the solid electrolyte interface (SEI) layer, impacts the froth flotation process significantly. The results also show that both the SEI layers and PVDF binder residues on the surface are removed at 400 degrees C for an hour, restoring the hydrophobicity of the anode materials, which, in turn, benefits the separation of anode and cathode materials. The STEM/EDX elemental analysis data confirms that there are 20 nm-thick oxygen-rich SEI layers on the surfaces, which can be removed after a heating process. The present result illustrates the significance of the SEI layers in flotation separation of electrode materials and sheds new lights into the future development of the recycling processes for the separation of anode and cathode composite materials from spent Li-ion batteries.
Design and Optimization of the Direct Recycling of Spent Li-Ion Battery Cathode Materials
Direct regeneration of spent Li-ion batteries based on the hydrothermal relithiation of cathode materials is a promising next-generation recycling technology. In order to demonstrate the feasibility of this approach at a large scale, we systematically design and optimize the process parameters to minimize both energy and raw material costs. Specifically, the effects of regenerative processing parameters on the composition, structure, and electrochemical performance of the regenerated cathode materials are investigated via systematic characterization and testing. From this analysis, it was found that the raw material costs can be substantially reduced by either replacing the typically employed 4 M LiOH solution by a cost-effective mixture of 0.1 M LiOH and 3.9 M KOH or recycling of the concentrated 4 M LiOH for continuous relithiation processes. Finally, life cycle analysis suggests that this strategy results in reduced energy consumption and greenhouse gas emissions, leading to an increased potential revenue, particularly when compared with hydro- and pyrometallurgical recycling methods.
In Situ Localized Polysulfide Injector for the Activation of Bulk Lithium Sulfide
The activation of commercial Li 2 S remains to be one of the key challenges against its commercialization as a starting cathode material for a sulfur-based Li-ion battery system. In this work we take advantage of the lower oxidation potential of commercial Na 2 S (1–3 wt%) to serve as an in situ and local polysulfide injector for the activation of commercial Li 2 S (70 wt%). Furthermore, in contrast to applying pre-solvated redox mediators, this technique allows for the activation of commercial Li 2 S at lower voltages with an electrolyte content as low as 3 μL mg –1 Li 2 S at 3 mgmg Li 2 S cm –2 and 4 μL mg –1 Li 2 S at 6.5 mg Li 2 S cm –2 without any other material modification.
Calendar aging of silicon-containing batteries
High-energy batteries for automotive applications require cells to endure well over a decade of constant use, making their long-term stability paramount. This is particularly challenging for emerging cell chemistries containing silicon, for which extended testing information is scarce. While much of the research on silicon anodes has focused on mitigating the consequences of volume changes during cycling, comparatively little is known about the time-dependent degradation of silicon-containing batteries. Here we discuss a series of studies on the reactivity of silicon that, collectively, paint a picture of how the chemistry of silicon exacerbates the calendar aging of lithium-ion cells. Assessing and mitigating this shortcoming should be the focus of future research to fully realize the advantages of this battery technology.