Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Homogenization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Stabilizing Zinc Anode Reactions by Polyethylene Oxide Polymer in Mild Aqueous Electrolytes

Abstract Zn dendrites growth and poor cycling stability are significant challenges for rechargeable aqueous Zn batteries. Zn metal deposition‐dissolution in aqueous electrolytes is typically determined by Zn anode–electrolyte interfaces. In this work, the role of a long‐chain polyethylene oxide (PEO) polymer as a multifunctional electrolyte additive in stabilizing Zn metal anodes is reported. PEO molecules suppress Zn 2+ ion transfer kinetics and regulate Zn 2+ ion concentration in the vicinity of Zn anodes through interactions between ether groups of PEO and Zn 2+ ions. The suppressed Zn 2+ ion transfer kinetics and homogeneous Zn 2+ ion distribution at the interface promotes dendrite‐free homogeneous Zn deposition. In addition, electrochemically inert PEO molecules adsorbed onto Zn anodes can protect the anode surfaces from H 2 generation and, thereby, enhance their electrochemical stability. Stable cycling over 3000 h and high reversibility (Coulombic efficiency > 99.5%) of Zn anodes is demonstrated in 1 m ZnSO 4 electrolyte with 0.5 wt% PEO. This finding provides helpful insights into the mechanism of Zn metal anodes stabilization by low‐cost multifunctional polymer electrolyte additives that stabilize interfacial reactions.

Jin, Yan↗

Self‐Assembled Membranes for High Ion Selectivity and Proton Blocking in Electrochemical Applications

Anion-exchange membranes (AEMs) with high anion/cation selectivity and exceptional proton-blocking ability are critical for applications such as bipolar membrane electrodialysis and electrochemical acid recovery. However, existing AEMs are constrained by a trade-off between ionic conductivity and selectivity, largely due to the intrinsic coupling between charge density and water content, and they suffer from excessive proton leakage facilitated by the Grotthuss hopping mechanism. In this work, poly(vinylimidazolium) membranes functionalized with long alkyl side chains that self-assemble into well-defined microphase-separated morphologies stabilized by hydrophobic and electrostatic interactions are reported. These unique structures localize the charge density along the polymer backbone to promote fast and selective ion transport. As a result, these membranes exhibit ionic conductivities and counter-ion diffusivities surpassing those of conventional homogeneous membranes, along with unprecedented counter-ion/co-ion selectivity and proton-blocking ability. These results establish a new design paradigm for high-performance, phase separated charged polymer membranes that overcome the limitations of homogeneous membranes, with broad implications for advanced electrochemical technologies.

36 MATERIALS SCIENCE↗

A 3D Lithiophilic Mo 2 N–Modified Carbon Nanofiber Architecture for Dendrite–Free Lithium–Metal Anodes in a Full Cell

The pursuit for high-energy-density batteries has inspired the resurgence of metallic lithium (Li) as a promising anode, yet its practical viability is restricted by the uncontrollable Li dendrite growth and huge volume changes during repeated cycling. Herein, a new 3D framework configured with Mo 2 N-mofidied carbon nanofiber (CNF) architecture is established as a Li host via a facile fabrication method. The lithiophilic Mo 2 N acts as a homogeneously pre-planted seed with ultralow Li nucleation overpotential, thus spatially guiding a uniform Li nucleation and deposition in the matrix. The conductive CNF skeleton effectively homogenizes the current distribution and Li-ion flux, further suppressing Li-dendrite formation. As a result, the 3D hybrid Mo 2 N@CNF structure facilitates a dendrite-free morphology with greatly alleviated volume expansion, delivering a significantly improved Coulombic efficiency of ≈99.2% over 150 cycles at 4 mA cm –2 . Symmetric cells with Mo 2 N@CNF substrates stably operate over 1500 h at 6 mA cm –2 for 6 mA h cm –2 . Furthermore, full cells paired with LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NMC811) cathodes in conventional carbonate electrolytes achieve a remarkable capacity retention of 90% over 150 cycles. Finally, this work sheds new light on the facile design of 3D lithiophilic hosts for dendrite-free lithium-metal anodes.

25 ENERGY STORAGE↗

Enhancing and Extinguishing the Different Emission Features of 2D (EA(1-)(x)FA(x))(4)Pb3Br10 Perovskite Films

2D hybrid perovskites are attractive for optoelectronic devices. In thin films, the color of optical emission and the texture of crystalline domains are often difficult to control. Here, a method for extinguishing or enhancing different emission features is demonstrated for the family of 2D Ruddlesden-Popper perovskites (EA(1-)(x)FA(x))(4)Pb3Br10 (EA = ethylammonium, FA = formamidinium). When grown from aqueous hydrobromic acid, crystals of (EA(1-)(x)FA(x))(4)Pb3Br10 retain all the emission features of their parent compound, (EA)(4)Pb3Br10. Surprisingly, when grown from dimethylformamide (DMF), an emission feature, likely self-trapped exciton (STE), near 2.7 eV is missing. Extinction of this feature is correlated with DMF being incorporated between the 2D Pb-Br sheets, forming (EA(1-)(x)FA(x))(4)Pb3Br10 center dot(DMF)(y). Without FA, films grown from DMF form (EA)(4)Pb3Br10, retain little solvent, and have strong emission near 2.7 eV. Slowing the kinetics of film growth strengthens a different emission feature, likely a different type of STE, which is much broader and present in all compositions. Films of (EA(1-)(x)FA(x))(4)Pb3Br10 center dot(DMF)(y) have large, micron-sized domains and homogeneous orientation of the semiconducting sheets, resulting in low electronic disorder near the absorption edge. The ability to selectively strengthen or extinguish different emission features in films of (EA(1-)(x)FA(x))(4)Pb3Br10 center dot(DMF)(y) reveals a pathway to tune the emission color in these compounds.

2D halide perovskites↗

Lewis Acid‐Activated Charge Trapping in Dielectric Polymers for Superior High‐Temperature Electrostatic Energy Storage

Dielectric polymer capacitors are essential for electrostatic energy storage but suffer from charge transport-induced energy losses, particularly at elevated temperatures where thermally activated charge carriers exacerbate conduction. Conventional mitigation strategies rely on introducing heterogeneous interfaces to create charge traps, complicating scalable film fabrication. A homogeneous molecular trapping mechanism would circumvent these complexities, yet remains underexplored. Herein, a charge trapping strategy is devised by modifying the lowest occupied molecular orbitals of dielectric polymers through Lewis acid-base adduct formation. The use of tris(pentafluorophenyl)boron (BCF) as a Lewis acidic molecular additive introduces deeper charge traps in commercial polyetherimide (PEI) while retaining homogeneity. With only 0.5 wt.% loading, the PEI-BCF film exhibits greatly improved breakdown strength, achieving an ultrahigh discharged energy density of 7.3 J cm-3 with excellent cycle stability at 200 °C. This work establishes a facile molecular approach to decoupling charge trapping from heterogeneous interfaces, enabling high-energy-density polymer capacitors operable under extreme thermal conditions.

Fan, Lu↗

Electrically‐Driven Metal‐Insulator Transitions Emerging from Localizing Current Density and Temperature

Negative differential resistance (NDR) is a key electronic response enabling two‐terminal artificial neurons that can be achieved through different physical phenomena, including phase‐homogeneous current density and temperature (electro‐thermal) localizations and spatially‐localized metal‐insulator phase transitions (MITs). These two effects have been observed to occur sequentially in select electrically‐biased transition metal oxides. However, it is unknown why and under what conditions localizing behaviors precede MITs, particularly as a function of device length scale. To this end, the interplay between phase‐homogeneous electro‐thermal localizations and MITs is investigated in a 3D multiphysics simulation of a lateral thin film device, using the material properties of the prototype MIT material VO 2 . These findings demonstrate that the MIT is nucleated through dynamically localizing current density and temperature. A critical device width (≈0.7 µm in this study) is identified, below which both the electrically‐induced electro‐thermal and phase inhomogeneities cease to appear. It is demonstrated that the formation of spatial inhomogeneities directly relates to device dimensions, and demonstrate the decoupling of NDR from the MIT through device scaling relationships. These results provide insight into the material phenomena underlying the material's electrical responses, clarifying conditions under which spatial inhomogeneities form in electrically‐biased MIT materials.

artificial neuron↗

Current‐Dependent Lithium Metal Growth Modes in “Anode‐Free” Solid‐State Batteries at the Cu|LLZO Interface

Abstract Controlling the lithium growth morphology in lithium reservoir‐free cells (RFCs), so‐called “anode‐free” solid‐state batteries, is of key interest to ensure stable battery operation. Despite several benefits of RFCs like improved energy density and easier fabrication, issues during the charging of the cell hinder the transition from lithium metal batteries with a lithium reservoir layer to RFCs. In RFCs, the lithium metal anode is plated during the first charging step at the interface between a metal current collector and the solid electrolyte, which is prone to highly heterogeneous growth instead of the desired homogeneous film‐like growth. Herein, the lithium morphology during the first charging step in RFCs is explored as a function of current density and current collector thickness. Using operando scanning electron microscopy, an increase in the lithium particle density is observed with increasing current density at the Cu|Li 6.25 Al 0.25 La 3 Zr 2 O 12 interface. This observation is then applied to improve the area coverage of lithium by pulsed plating. It is also shown that thin current collectors ( d = 100 nm) are unsuited for RFCs, as lithium whiskers penetrate them, resulting in highly heterogeneous interfaces. This suggests the use of thicker metal layers (several µm) to mitigate whisker penetration and facilitate homogeneous lithium plating.

25 ENERGY STORAGE↗

The Microscopic Mechanism of Lithiation and Delithiation in the Ag/C Buffer Layer for Anode‐Free Solid‐State Batteries

Abstract Lithium metal solid‐state batteries (LMSSBs) have demonstrated their high energy density and cycling performance at high current densities in an anode‐free architecture, featuring a thin Ag/C composite buffer layer (BL) between the current collector (CC) and the solid electrolyte (SE). This study explains the microscopic mechanism of the Ag/C BL by using first‐principles atomistic and continuum modeling. It is shown that Ag effectively acts as a homogeneous solid‐solution beyond AgLi 2.32 and maintains a positive potential even at AgLi 25 during lithiation. Key factors underlying the working of the Ag/C BL include lower interfacial resistance at the BL/CC interface than at the BL/SE interface, leading to predominant Li deposition on BL/CC, and substantial Ag–Li volume expansion during lithiation. This, combined with stronger BL/SE adhesion, causes BL/SE separation and Ag–Li extrusion toward the CC side. During delithiation, Ag re‐precipitates as nanoparticles uniformly on the CC, with its positive lithiation potential homogenizing Li currents in subsequent cycles. Other metals are less effective due to their relatively large overpotential, premature lithiation termination, and limited volume expansions hindering movement toward the CC. The study aids the BL design, focusing on metal choice and optimization material and microstructural properties, such as the Li‐ion conductivity and interfacial resistance.

25 ENERGY STORAGE↗

Controlled Generation of Singlet Oxygen in Living Cells with Tunable Ratios of the Photochromic Switch in Metal–Organic Frameworks

Abstract Development of a photosensitizing system that can reversibly control the generation of singlet oxygen ( 1 O 2 ) is of great interest for photodynamic therapy (PDT). Recently several photosensitizer–photochromic‐switch dyads were reported as a potential means of the 1 O 2 control in PDT. However, the delivery of such a homogeneous molecular dyad as designed (e.g., optimal molar ratio) is extremely challenging in living systems. Herein we show a Zr‐MOF nanoplatform, demonstrating energy transfer‐based 1 O 2 controlled PDT. Our strategy allows for tuning the ratios between photosensitizer and the switch molecule, enabling maximum control of 1 O 2 generation. Meanwhile, the MOF provides proximal placement of the functional entities for efficient intermolecular energy transfer. As a result, the MOF nanoparticle formulation showed enhanced PDT efficacy with superior 1 O 2 control compared to that of homogeneous molecular analogues.

Park, Jihye↗

A Single‐Atom Iridium Heterogeneous Catalyst in Oxygen Reduction Reaction

Abstract Combining the advantages of homogeneous and heterogeneous catalysts, single‐atom catalysts (SACs) are bringing new opportunities to revolutionize ORR catalysis in terms of cost, activity and durability. However, the lack of high‐performance SACs as well as the fundamental understanding of their unique catalytic mechanisms call for serious advances in this field. Herein, for the first time, we develop an Ir‐N‐C single‐atom catalyst (Ir‐SAC) which mimics homogeneous iridium porphyrins for high‐efficiency ORR catalysis. In accordance with theoretical predictions, the as‐developed Ir‐SAC exhibits orders of magnitude higher ORR activity than iridium nanoparticles with a record‐high turnover frequency (TOF) of 24.3 e − site −1 s −1 at 0.85 V vs. RHE) and an impressive mass activity of 12.2 A mg −1 Ir , which far outperforms the previously reported SACs and commercial Pt/C. Atomic structural characterizations and density functional theory calculations reveal that the high activity of Ir‐SAC is attributed to the moderate adsorption energy of reaction intermediates on the mononuclear iridium ion coordinated with four nitrogen atom sites.

Xiao, Meiling↗

An Active‐Site Sulfonate Group Creates a Fast Water Oxidation Electrocatalyst That Exhibits High Activity in Acid

Abstract The storage of solar energy in chemical bonds will depend on pH‐universal catalysts that are not only impervious to acid, but actually thrive in it. Whereas other homogeneous water oxidation catalysts are less active in acid, we report a catalyst that maintained high electrocatalytic turnover frequency at pH values as low as 1.1 and 0.43 ( k cat =1501±608 s −1 and 831±254 s −1 , respectively). Moreover, current densities, related to catalytic reaction rates, ranged from 15 to 50 mA cm −2 mM −1 comparable to those reported for state‐of‐the‐art heterogeneous catalysts and 30 to 100 times greater than those measured for two prominent literature homogeneous catalysts at pH 1.1 and 0.43. The catalyst also exhibited excellent durability when a chemical oxidant was used (Ce IV , 7400 turnovers, TOF 0.88 s −1 ). Preliminary computational studies suggest that the unusual active‐site sulfonate group acts a proton relay even in strong acid, as intended.

Nash, Aaron G.↗

Influence of Ti‐incorporated Zeolite Topology and Pore Condensation on Vapor Phase Propylene Epoxidation Kinetics with Gaseous H 2 O 2

Abstract Vapor‐phase propylene (C 3 H 6 ) epoxidation kinetics with hydrogen peroxide (H 2 O 2 ) strongly reflects the physical properties of Ti‐incorporated zeolite catalysts and the presence of spectating molecules (“solvent”) near active sites even without a bulk liquid phase. Steady‐state turnover rates of C 3 H 6 epoxidation and product selectivities vary by orders of magnitudes, depending on the zeolite silanol ((SiOH) x ) density, pore topology (MFI, *BEA, FAU), and the quantity of condensed acetonitrile (CH 3 CN) molecules nearby active sites, under identical reaction mechanisms sharing activated H 2 O 2 intermediates on Ti surfaces. Individual kinetic analyses for propylene oxide (PO) ring‐opening, homogeneous diol oxidative cleavage, and homogeneous aldehyde oxidation reveal that secondary reaction kinetics following C 3 H 6 epoxidation responds more sensitively to the changes in zeolite physical properties and pore condensation with CH 3 CN. Thus, higher PO selectivities achieved in hydrophilic Ti‐MFI at steady‐state reflect the preferential stabilization of transition states for C 3 H 6 epoxidation (a primary reaction) relative to PO ring‐opening and oxidative cleavage (secondary reactions) that solvation effects that reflect interactions among condensed CH 3 CN within pores and the extended pore structure.

Kwon, Ohsung↗

Catalytically Active Site Mapping Realized through Energy Transfer Modeling

Abstract The demands of a sustainable chemical industry are a driving force for the development of heterogeneous catalytic platforms exhibiting facile catalyst recovery, recycling, and resilience to diverse reaction conditions. Homogeneous‐to‐heterogeneous catalyst transitions can be realized through the integration of efficient homogeneous catalysts within porous matrices. Herein, we offer a versatile approach to understanding how guest distribution and evolution impact the catalytic performance of heterogeneous host–guest catalytic platforms by implementing the resonance energy transfer (RET) concept using fluorescent model systems mimicking the steric constraints of targeted catalysts. Using the RET‐based methodology, we mapped condition‐dependent guest (re)distribution within a porous support on the example of modular matrices such as metal–organic frameworks (MOFs). Furthermore, we correlate RET results performed on the model systems with the catalytic performance of two MOF‐encapsulated catalysts used to promote CO 2 hydrogenation and ring‐closing metathesis. Guests are incorporated using aperture‐opening encapsulation, and catalyst redistribution is not observed under practical reaction conditions, showcasing a pathway to advance catalyst recyclability in the case of host–guest platforms. These studies represent the first generalizable approach for mapping the guest distribution in heterogeneous host–guest catalytic systems, providing a foundation for predicting and tailoring the performance of catalysts integrated into various porous supports.

Thompson, William J.↗

Heterogeneous Fe‐N‐C Cocatalyst for Hydroquinone Oxidation Enables Aerobic Oxidation of Primary Alcohols to Aldehydes

Abstract Benzoquinone (BQ) is commonly used as a cocatalyst in multi‐component catalyst systems for aerobic oxidation of organic molecules. Such methods often proceed by a redox cascade in which a secondary catalyst supports aerobic oxidation of hydroquinone (HQ) to BQ. The present study shows that a commercially available non‐precious metal heterogeneous catalyst, PAJ‐Fe‐N‐C, is much more efficient than established homogeneous catalysts for aerobic oxidation of HQ to BQ, and this improved reactivity is crucial to support aerobic oxidation of primary alcohols to aldehydes with the homogeneous iridium catalyst, [Ir(trop 2 DAD]OTf (trop 2 DAD= N , N ‐bis(5‐ H ‐dibenzo[ a , d ]cycloheptene‐5‐yl)‐1,4‐diazabuta‐1,3‐diene). The combination of this heterogeneous/homogeneous catalyst system operates with Ir catalyst loadings as low as 0.05 mol % and turnover frequencies ≥350 h −1 .

Asmaul Hoque, Md [Department of Chemistry Universi↗

Controlled Generation of Singlet Oxygen in Living Cells with Tunable Ratios of the Photochromic Switch in Metal–Organic Frameworks

Abstract Development of a photosensitizing system that can reversibly control the generation of singlet oxygen ( 1 O 2 ) is of great interest for photodynamic therapy (PDT). Recently several photosensitizer–photochromic‐switch dyads were reported as a potential means of the 1 O 2 control in PDT. However, the delivery of such a homogeneous molecular dyad as designed (e.g., optimal molar ratio) is extremely challenging in living systems. Herein we show a Zr‐MOF nanoplatform, demonstrating energy transfer‐based 1 O 2 controlled PDT. Our strategy allows for tuning the ratios between photosensitizer and the switch molecule, enabling maximum control of 1 O 2 generation. Meanwhile, the MOF provides proximal placement of the functional entities for efficient intermolecular energy transfer. As a result, the MOF nanoparticle formulation showed enhanced PDT efficacy with superior 1 O 2 control compared to that of homogeneous molecular analogues.

Park, Jihye↗

A Single‐Atom Iridium Heterogeneous Catalyst in Oxygen Reduction Reaction

Abstract Combining the advantages of homogeneous and heterogeneous catalysts, single‐atom catalysts (SACs) are bringing new opportunities to revolutionize ORR catalysis in terms of cost, activity and durability. However, the lack of high‐performance SACs as well as the fundamental understanding of their unique catalytic mechanisms call for serious advances in this field. Herein, for the first time, we develop an Ir‐N‐C single‐atom catalyst (Ir‐SAC) which mimics homogeneous iridium porphyrins for high‐efficiency ORR catalysis. In accordance with theoretical predictions, the as‐developed Ir‐SAC exhibits orders of magnitude higher ORR activity than iridium nanoparticles with a record‐high turnover frequency (TOF) of 24.3 e − site −1 s −1 at 0.85 V vs. RHE) and an impressive mass activity of 12.2 A mg −1 Ir , which far outperforms the previously reported SACs and commercial Pt/C. Atomic structural characterizations and density functional theory calculations reveal that the high activity of Ir‐SAC is attributed to the moderate adsorption energy of reaction intermediates on the mononuclear iridium ion coordinated with four nitrogen atom sites.

Xiao, Meiling↗