Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Geologic Formations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

The Viscoplastic Behavior of Natural Hydrate‐Bearing Sandy‐Silts Under Uniaxial Strain Compression ( K 0 Loading)

Abstract The in‐situ stress state and geomechanical properties of hydrate‐bearing sediments impact hydrate formation and gas production strategies. We explore the uniaxial strain compression and stress evolution of natural hydrate‐bearing sandy‐silts from Green Canyon Block 955 in the deep‐water Gulf of Mexico. We performed constant rate of strain uniaxial strain experiments, interrupted by periods where we held the axial stress constant, to explore the vertical deformation and the evolution of the ratio of lateral to axial effective stress ( K 0 ) with time. The hydrate‐bearing sandy‐silt is stiffer and has a larger K 0 than the equivalent hydrate‐free sediment upon loading. During stress holds, the void ratio decreases sigmoidally with the log of time, and K 0 converges to isotropic conditions. We interpret that during loading, the hydrate bears the load and deforms. With time, the hydrate redistributes the load and K 0 increases. We used a viscoelastic model to describe the behavior. The model accurately captures deformation and K 0 trends but does not reproduce all the complex interactions of the hydrate with the porous skeleton. We anticipate that viscous effects within hydrate sediments will impact reservoir compression and stresses during production (hours to days), result in isotropic stress state over geological timescales, and explain the creeping movement in submarine landslides.

58 GEOSCIENCES↗

Evidence of a South Asian Proto‐Monsoon During the Oligocene‐Miocene Transition

Abstract The geological history of the South Asian monsoon (SAM) before the Pleistocene is not well‐constrained, primarily due to a lack of available continuous sediment archives. Previous studies have noted an intensification of SAM precipitation and atmospheric circulation during the middle Miocene (∼14 Ma), but no records are available to test how the monsoon changed prior to this. In order to improve our understanding of monsoonal evolution, geochemical and sedimentological data were generated for the Oligocene‐early Miocene (30–20 Ma) from Indian National Gas Hydrate Expedition 01 Site NGHP‐01‐01A in the eastern Arabian Sea, at 2,674 m water depth. We find the initial glaciation phase (23.7–23.0 Ma) of the Oligocene‐Miocene transition (OMT) to be associated with an increase in water column ventilation and water mass mixing, suggesting an increase in winter monsoon type atmospheric circulation, possibly driven by a relative southward shift of the intertropical convergence zone. During the latter part of the OMT, or “deglaciation” phase (23.0–22.7 Ma), a long‐term decrease in Mn (suggestive of deoxygenation), increase in Ti/Ca and dissolution of the biogenic carbonate fraction suggest an intensification of a proto‐summer SAM system, characterized by the formation of an oxygen minimum zone in the eastern Arabian Sea and a relative increase of terrigenous material delivered by runoff to the site. With no evidence at this site for an active SAM prior to the OMT we suggest that changes in orbital parameters, as well as possibly changing Tethyan/Himalayan tectonics, caused this step change in the proto‐monsoon system at this intermediate‐depth site.

Beasley, C.↗

toughio v1.2.2

TOUGH is a widely used general purpose numerical simulator designed for fluid and heat flows of multiphase, multicomponent fluid mixtures in porous and fractured media, which has been applied to many real-world problems such as underground geological storage, geothermal reservoir engineering or nuclear waste disposal, to name a few. `toughio` is a lightweight, object-oriented and vectorized Python library that aims to provide user-friendly routines to facilitate pre- and post-processing of a TOUGH simulation. Although its primary target is the latest version TOUGH3, `toughio` can also be used to read/write TOUGH2 input/output files. Currently, to the best of our knowledge, only PyTOUGH offers an exhaustive number of features to carry out a complete TOUGH simulation using a scripting language. `toughio` and PyTOUGH share the same objectives, yet with different approaches and philosophies. On the one hand, a PyTOUGH mesh is represented as a MULGRAPH geometry where elements can be unstructured horizontally but only layered vertically. It also checks that the model parameters are valid to ensure that a TOUGH simulation runs smoothly. On the other hand, although it provides basic meshing features, `toughio` mostly relies on common third-party softwares (e.g. Abaqus, FLAC3D, Gmsh, LaGriT) to generate the mesh by importing and converting it to a TOUGH mesh, which also conveniently facilitates the coupling of TOUGH with any other simulator that also supports the same mesh formats. Besides, `toughio` is designed to be just a TOUGH input and output file reader/writer. It assumes that the user knows what he is doing and does not verify the validity of the model parameters (`toughio` does verify the functional arguments).

Luu, Keurfon↗

Fracture, Dissolution, and Cementation Events in Ordovician Carbonate Reservoirs, Tarim Basin, NW China

Ordovician carbonate rocks of the Yijianfang Formation in the Tabei Uplift, Tarim Basin, contain deeply buried (>6000 m), highly productive oil and gas reservoirs associated with large cavities (>10 m). Previous workers inferred that large cavities are paleocaves (paleokarst) formed near the surface and subsequently buried. Alternately, caves may have formed by dissolution at depth along faults. Using 227 samples from 16 cores, we document textures and cement compositions bearing on cavity histories with petrographic, high-resolution scanning electron microscopy (SEM), isotopic, and fluid inclusion microthermometric observations. Results show that dissolution occurred at depth and was caused by (1) acidic fluids derived from Middle-Late Silurian and/or Devonian-Permian hydrocarbon generation and maturation, (2) high-temperature fluids, of which some were associated with Late Permian igneous activity, and (3) Mg-rich fluids that accompanied Jurassic-Cretaceous deformation and the formation of partially open fractures and stylobreccias (fault breccias). The relative paragenetic sequence of the structure-related diagenesis suggests seven stages of fracturing, dissolution, and cementation. Mottle fabrics in the Yijianfang Formation contain argillaceous carbonate-rich silt and are bioturbation features formed within the marine environment. Those mottled fabrics differ from clearly karstic features in the overlying Lianglitage Formation, which formed by near-surface dissolution and subsequent infilling of cavities by allochthonous sediment. Mottle fabrics are crosscut by compacted fractures filled with phreatic-vadose marine cements and followed by subsequent generations of cement-filled fractures and vugs indicating that some fractures and vugs became cement filled prior to later dissolution events. Calcite cements in fractures and vugs show progressively depleted values of δ18O documenting cement precipitation within the shallow (~220 m), intermediate (~625 m), and deep (~2000 m) diagenetic environments. Deep (mesogenetic) dissolution associated with fractures is therefore the principal source of the high porosity-permeability in the reservoir, consistent with other pieces of evidence for cavities localized near faults.

58 GEOSCIENCES↗

Carbon storage cost modeling for the offshore Gulf of Mexico

Groundbreaking for geologic carbon storage (GCS) projects in the offshore Gulf of Mexico is imminent, and there is great interest in utilizing this region for GCS projects. Offshore saline reservoirs provide a significant and accessible resource for GCS. However, conducting GCS in the offshore environment will pose distinct challenges pertaining to site selection, operations, infrastructure use, and monitoring compared to operating onshore that ultimately affect technoeconomic assessment of offshore GCS projects. Carbon storage and transport costs are critical to project developers looking to deploy carbon storage in the offshore environment. We present CO2_S_COM_Offshore, a model developed by the National Energy Technology Laboratory (NETL) as a screening-level offshore saline GCS cost modeling tool. Based on NETL’s widely used CO2_S_COM cost model for onshore saline CS, CO2_S_COM_Offshore enables technoeconomic analysis of GCS in offshore areas. This model comprehensively incorporates multiple facets of offshore GCS projects, from regional evaluation and site selection to permitting, transport, operations, monitoring, site closure, and decommissioning. In general, the model can explore the cost implications for potential offshore GCS project(s) by enabling the user to change several project operational and financial attribute configurations. Key inputs include offshore storage formation options, CO2 injection rate and duration, infrastructure types, monitoring intensity, project financing, and post-injection site care duration. Supporting cost algorithms within CO2_S_COM_Offshore were compiled utilizing S&P Global’ s QUE$TORTM cost estimation software alongside a variety of open-source scientific literature. In addition to reviewing key model components, we discuss several sensitivity analyses, input variabilities, and results on analysis of break-even CO2 price required by a project based on different regulation/policy and operational scenarios for the offshore Gulf of Mexico. These results indicate the value of modeling offshore GCS specifically, and the potential of offshore GCS within a decarbonization value chain. Presented at the 41st USAEE/IAEE North American Conference, 3-6 November 2024, Baton Rouge, LA, United States.

Mark-Moser, Mackenzie K.↗

The Planetary Materials Database

NASA provides funds for a variety of research programs whose principal focus is to collect and analyze terrestrial analog materials. These data are used to (1) understand and interpret planetary geology; (2) identify and characterize habitable environments and pre-biotic/biotic processes; (3) interpret returned data from present and past missions; and (4) evaluate future mission and instrument concepts prior to selection for flight. Data management plans are now required for these programs, but the collected data are still not generally available to the community. There is also little possibility to re-analyze the collected materials by other techniques, since there is no requirement to archive collected samples. The Planetary Materials Database (PMD) is a central, high-quality, long-term data repository, which aims to promote the field of astrobiology and increase scientific returns from NASA funded research by enabling data sharing, collaboration and exposure of non-NASA scientists to NASA research initiatives and missions. The PMD is a linked collection of databases developed using the Open Data Repository (ODR) system. The PMD will include detailed descriptions of terrestrial analog planetary materials as well as data from the instruments used in their analysis. The goal is to provide example patterns/spectra/analyses, etc. and background information suitable for use by the Space Science community. An early example showing the utility of these databases (although not in the ODR format) is the RRUFF mineral database. RRUFF, comprising 4,000+ pure mineral standards, is the most popular and widely used dataset of minerals and receives more than 180,000 queries per week from geologists and mineralogists worldwide. The PMD will be patterned after the CheMin database [3], a resource that contains all of the data collected by the MSL CheMin XRD instrument on Mars. Raw and processed CheMin data can be viewed, downloaded, reprocessed and reanalyzed using cloud-based “applications” linked to the data.

Blake, David↗

Hydrologic Model Files (PRMS) for Historical Conditions in the East River Watershed, Colorado between 1987-2019

The data package contains model input and output file for the East River watershed (85 km2) located in the headwaters of the Colorado River. The model is the U.S. Geological Survey (USGS) Precipitation-Modeling Runoff System (PRMS) for the historical, or baseline, condition (1987-2019) to assess the efficiency of summer monsoon rains to generate streamflow. The finite difference grid resolution is 100 m with elevations resampled from the USGS National Elevation Dataset. LANDFIRE raster data is used to derive parameters of dominant cover type, summer and winter cover density, canopy interception characteristics for snow and rain and transmission coefficient for shortwave radiation. Climate forcing uses minimum and maximum daily temperature lapse rates defined by the two Snow Telemetry (SNOTEL) stations located in the vicinity of the East River adjusted for aspect. Schofield SNOTEL snowfall is spatially distributed using LiDAR derived snow depth observations from the Airborne Snow Observatory (ASO) flown 4 April 2016. Snow depths are converted to snow water equivalent based on ground surveys and density modeling. Rainfall is spatially distributed using the monthly Parameter-elevation Relationships on Independent Slopes Model 30-year monthly averages. Simulated solar radiation is calibrated to match weather station observations. Model verification of snow water equivalent (SWE) accumulation and ablation relies on the 2018 and 2019 ASO maps and weather station snow depth. The data package contains model input files in text format, model documentation in pfd and a readme.txt file to help users understand the file structure to run the program.

54 ENVIRONMENTAL SCIENCES↗

Lunar Phase Function at 1064 Nm from Lunar Orbiter Laser Altimeter Passive and Active Radiometry

We present initial calibration and results of passive radiometry collected by the Lunar Orbiter Laser Al- timeter onboard the Lunar Reconnaissance Orbiter over the course of 12 months. After correcting for time- and temperature-dependent dark noise and detector responsivity variations, the LOLA passive radiometry measurements are brought onto the absolute radiance scale of the SELENE Spectral Profiler. The resulting photometric precision is estimated to be approximately 5%. We leverage the unique ability of LOLA to measure normal albedo to explore the 1064 nm phase function's dependence on various geologic parameters. On a global scale, we find that iron abundance and optical maturity (quantified by FeO and OMAT) are the dominant controlling parameters. Titanium abundance (TiO2 ), surface roughness on decimeter to decameter scales, and soil thermophysical properties have a smaller effect, but the latter two are correlated with OMAT, indicating that exposure age is the driving force behind their effects in a globally-averaged sense. The phase function also exhibits a dependence on surface slope at approximately 300 m baselines, possibly the result of mass wasting exposing immature material and/or less space weathering due to reduced sky visibility. Modeling the photometric function in the Hapke framework, we find that, relative to the highlands, the maria exhibit decreased backscattering, a smaller opposition effect (OE) width, and a smaller OE amplitude. Immature highlands regolith has a higher backscattering fraction and a larger OE width compared to mature highlands regolith. Within the maria, the backscattering fraction and OE width show little dependence on TiO2 and OMAT. Variations in the phase function shape at large phase angles are observed in and around the Copernican-aged Jackson crater, including its dark halo, a putative impact melt deposit. Finally, the phase function of the Reiner Gamma Formation behaves more optically immature than is typical for its composition and OMAT, suggesting the visible-to-near-infrared spectrum and phase function respond differently to the unusual regolith evolution and properties at this location.

LOLA↗

Effects of time-dependent deformation of shale on the integrity of a geological nuclear waste repository

Safety assessment of geological nuclear waste repositories is essential for the permanent disposal of spent nuclear fuels and high-level radioactive waste. The long-term integrity of the host rock as well as the engineered barrier system (e.g., bentonite buffer) surrounding nuclear waste canisters is of particular importance as decay heat from nuclear waste canisters, which will last over thousands of years, significantly disturbs the thermo-hydromechanical (THM) state of the repository. In this study, THM coupled simulations were carried out to investigate the effect of time-dependent deformation (i.e., creep) of shale on the long-term integrity of a generic subsurface nuclear waste repository. The Norton-Bailey creep model, which is also known as the Lemaitre-Menzel-Schreiner model, was employed to simulate the power-law type creep that is observed in shales. The TOUGH-FLAC simulator was employed for the THM coupled modeling of the repository. The objective of this study is to assess the effect of creep in different shales (i.e., high creep shale vs. low creep shale) on long-term stress and permeability changes in the repository. Results show potential advantages of constructing repositories in the high creep shale, as deviatoric stress levels in the formation decreased to zero in 100 years since the emplacement of nuclear waste canisters and the permeability also decreased to the undamaged, intrinsic levels in 10,000 years. Also, mean effective stress levels in the bentonite buffer increased by 100% in the high creep shale case relative to the low creep shale case at 10,000 years due to creep-induced contraction of the nuclear waste disposal tunnel. However, in earlier periods (e.g., 1000 years), the stress levels in the bentonite buffer were twice smaller in the high creep shale case than in the low creep shale case, which shows a tradeoff between the intermediate- (~1000 years) and long-term (>10,000 years) compaction levels in the bentonite buffer depending on the creep characteristics of the host shale.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characterization of Venera 15/16 Geologic Units from Pioneer Venus Reflectivity and Roughness Data

Geologic units have been defined for the surface of Venus from Venera 15/16 image data. A characterization of these geologic units is carried out using information on surface properties derived from Pioneer Venus (PV) reflectivity and rms slope data. The geologic context provided by Venera 15/16 units allows additional, more specific interpretations of surface radar properties to be made. Characterization of Venera units results in the definition of four groups of Venera units: (1) smooth rocky units, 2) rough rocky units, (3) rough high dielectric units, and (4) diffusely scattering units. On the basis of correlations of surface morphology to spatial and statistical distributions in rms slope and reflectivity data, we test models for the origin of the surface properties of some units. We conclude that plains and tectonic units can be contrasted in terms of the average roughness of the surface and that tectonic deformation appears to roughen the surface at 0.5- to 10-m and 5- to 50-cm scales. This tectonic weathering process appears to dominate the erosional regime of Venus. Unlike Earth or Mars, production and transport of soils dominates only a small portion (less than or equal to 5%) of the surface. Some of the Venera units display distinctive spatial and statistical distributions of PV radar data. In particular, apparent low reflectivity in the tesserae appears to be caused by small (5-50 cm) rock fragments on the surface which cause diffuse scattering at Pioneer Venus wavelengths. Analysis of models for the formation of these fragments suggests that they are due to the pervasive deformation undergone by the tesserae. Finally, aspects of this study have been used to extend results of Venera image data analysis southward of 30 deg. N lat, resulting in it prediction of the distribution of tessera. Such results can aid in Magellan investigations.

Bindschadler, D. L.↗

Shallow crustal discontinuities and graben and scarp formation in the Tharsis region of Mars

We recently obtained photoclinometric profiles across all simple grabens and erosional landforms (e.g., troughs, pits, wall-valley heads, and scarps that are bounded above and below by flat surfaces) that occur within Tempe Terra. These data, together with similar data that we obtained for Syria, Sinai, and Lunae Plana and the Alba Patera region, allow regional examination of shallow crust Al discontinuities between latitude 30 deg. S and 50 deg. N and longitude 50 deg. W and 112 deg. W. The profile for each simple graben was used with an appropriate structural model to estimate the depth to the base of the faulted layer. The depths of erosional wall scarps may also indicate the depths of mechanical discontinuities such as a local lithologic or cryospheric boundary. Examination of these data indicates a surprisingly consistent set of shallow crust Al discontinuities for the Tharsis region at depths of 0.4-0.6 km, 1.0-1.4 km, and 2 km; the maximum depth of the features in most study areas appears to be about 4 km. The concentration of values between 0.4 and 0.6 km in most scarp and some faulted-layer depth data is similar to the range in estimated thicknesses of individual exposed Noachian and Hesperian plains units in the Tharsis region. The regional depth data also show two modes near 1 and 2 km in some study areas and a maximum depth near 4 km in most study areas; the faulted-layer depths in excess of 4 km at Alba Patera occur near the summit of the caldera and could be attributed to volcanic loading. Our detailed examination of these depth data includes the following observations: (1) The mode at 1.0-1.4 km depth transcends age and geologic setting in this broad study area; (2) The 2-km mode is most obvious at Alba Patera and moderately well developed at Syria and Sinai Plana, but it is muted at Tempe Terra, which is in the same latitude range as Alba Patera but older; and (3) The 2-km-depth mode is not present in all areas that have features of Amazonian age. We suggest two possible explanations for our observations in the Tharsis region.

Davis, P. A.↗

High-Temperature Thermodynamics of Cerium Silicates, A-Ce 2 Si 2 O 7 , and Ce 4.67 (SiO 4 ) 3 O

Lanthanide disilicates and oxyapatites have potential roles in high temperature applications as thermal (TBC) and environmental barrier coatings (EBC), or possible alteration phases in geological nuclear waste repositories. However, those Ce 3+ -bearing silicates have only been limitedly studied. In this work, we performed detailed structural and thermodynamic investigations on A-Ce 2 Si 2 O 7 (tetragonal, P4 1 ) and Ce 4.67 (SiO 4 ) 3 O (hexagonal, P6 3 /m). The high temperature structural behaviors and coefficients of thermal expansion were determined by in situ high temperature synchrotron X-ray diffraction (HT-XRD) implemented with Rietveld analysis and thermogravimetric analysis coupled with differential scanning calorimetry (TGA-DSC). A-Ce 2 Si 2 O 7 was found to be stable in N 2 and air up to ~1483 K with anisotropic thermal expansion along the a and c axes (α a = 12.3 × 10 -6 K -1 and α c = 12.4 × 10 -6 K -1 ). Ce 4.67 (SiO 4 ) 3 O had a slow partial oxidation between 533 K and 873 K to a new nonstoichiometric phase Ce 3+ 1.67- xCe4 + x Ce 3+ 3 (SiO 4 ) 3 O 1+0.5x , followed by a thermal decomposition to CeO 2 and SiO 2 at ~1000 K in air. By using high temperature oxide melt solution calorimetry at 973 K with lead borate as the solvent, the standard enthalpy of formation was determined for A-Ce 2 Si 2 O 7 (-3825.1 ± 6.0 kJ/mol) and Ce 4.67 (SiO 4 ) 3 O (-7391.3 ± 9.5 kJ/mol). Finally, these thermodynamic parameters were compared with those of CeO 2 , CeSiO 4 , and other silicate oxyapatites for examining their chemical stability in high temperature environments relevant for aeronautical applications, mineral formation, and nuclear fuel cycle.

36 MATERIALS SCIENCE↗

Landsat at 45: How it Changed the Way We See the Earth

On October 24, 1946, more than 10 years before the launch of the first artificial satellite Sputnik, scientists at the White Sands Missile Range in New Mexico placed a camera on top of a captured German V-2 ballistic missile. As the rocket flew to an altitude of about 65 miles - just above the generally recognized border of outer space - the 35-millimeter motion picture camera snapped a frame every one and a half seconds. Minutes later, the missile came crashing back down and slammed into the ground at more than 340 mph, but the film survived and gave us our first glimpse of Earth from space. Earth Resources Technology Satellite aka Landsat It was images like those first grainy black and white pictures and later those taken by America's first astronauts in the 1960's that inspired the development of the Earth Resources Technology Satellite (ERTS). From the unique vantage point of space, we could now observe Earth using a variety of different instruments to monitor changes over time. The ERTS-1 satellite, wisely renamed Landsat-1, was launched aboard a Delta rocket on July 23, 1972, into a Sun-synchronous polar orbit at an altitude of about 560 miles. In this unique orbit, Landsat could observe the same point on the Earth every 18 days, always with the same solar illumination, allowing for precise monitoring of changes on the ground over time. Landsat-1, derived from the highly successful Nimbus weather satellites, carried two instruments that allowed it to take images not only in visible light but also in infrared, well-suited to track changes in vegetation over time. Designed to last only one year, Landsat-1 actually operated for nearly three years, by which time it had been joined in space by Landsat-2, a near identical copy of the original. Since then, ever more sophisticated instruments were flown aboard Landsat-3 through -8, with Landsat-9 planned for launch in 2020, acquiring millions of images of Earth over more than four decades. At first, images from Landsat were processed by NASA and hardcopies sold to users for a fee, a somewhat tedious process. Since 2008, images have been made available to all interested users by the US Geological Survey (USGS) at no cost via the Internet in near real time. So, how can Landsat help? In short, Landsat looks. And looks. And proves Yogi right. Space-based images from Landsat and other similar satellites offer a unique and critical capability to observe land use over time by providing repetitive observations of the Earth otherwise unavailable. The data provided by the images can be used by scientists and politicians to inform wise decisions in areas such as agriculture, climate, ecosystems and biodiversity, energy, forest management, human health, fire, natural disasters, urban growth and water management. This overview article doesn't allow for examples from each of these disciplines, but details can be found at the following website: https://landsat.gsfc.nasa.gov/how_landsat_helps/. One third of the US economy is influenced by climate, weather and natural hazards, providing strong economic incentives to sustain a healthy space-based Earth observation program. One example, however, may be illustrative of how Landsat and other space-based observations can be helpful in monitoring and documenting some effects of global climate change. It had been noted since the 1970's that permafrost in subarctic areas like Siberia was melting at an accelerating rate. It also became apparent that this led to the formation of hundreds of melt lakes and the liberation of large quantities of methane, a gas that in the short-term has more potent greenhouse effects than carbon dioxide. The methane turned the water in these lakes blue, making them easy to track over time by satellite. Additionally, the newly released methane has been carbon dated to tens of thousands of years ago, meaning that it had remained frozen since the last Ice Age and therefore hadn't been accounted for in models of the Earth's overall carbon balance. Release of sufficient methane by an increasingly warming climate could actually cause a positive feedback loop in global warming, melting more permafrost and releasing yet more methane. Further monitoring by Landsat and other platforms will reveal whether this process is reversible or whether we've passed the tipping point. In addition to the highly successful Landsat series of satellites, NASA and other agencies such as the National Oceanic and Atmospheric Administration (NOAA) operate a fleet of other Earth observing platforms, many with more specific research goals such as monitoring sea ice levels or atmospheric carbon content. Several instruments aboard the International Space Station also contribute to this overall effort to better understand short- and long-term changes to the Earth. Many of these missions are guided by the 2009 Decadal Survey published by the National Research Council of the National Academy of Sciences. Europe, Russia and China all see the value of space-based Earth observation by deploying their own fleet of satellites.

Uri, John↗

Stratigraphy‐Induced Localization of Microseismicity During CO 2 Injection in Illinois Basin

Abstract Subsurface fluid injection stimulates complex hydromechanical interaction, necessitating the integration of geomechanical data across spatial and temporal scales to consider the sophisticated behavior. Induced seismic response is usually associated with the complex reservoir architecture and pre‐existing features that are three‐dimensional, such as local stratigraphy, fractures, faults, and other discontinuities. This study encompasses laboratory characterization of the coupled hydromechanical response of cores extracted from rock formations in Illinois Basin: reservoir ‐ Mt. Simon sandstone, basal seal ‐ Argenta sandstone, and crystalline basement ‐ Precambrian rhyolite. High‐resolution numerical modeling allows considering the three‐dimensional complexity of the Illinois Basin Decatur Project with spatial resolution comparable to one of the active seismic surveys. A detailed reconstruction of the evolving state of stress in formations lacking direct stress measurements is achieved by numerical modeling that integrated laboratory‐derived hydromechanical properties, a porosity‐permeability relationship, active seismic data, and an inverted three‐dimensional porosity distribution. It appears that the microseismic clusters, mainly observed in the crystalline basement during the injection, are linked to zones experiencing more critically stressed conditions prior to injection. These zones have a potential for reactivation during the injection and are attributed to the specific local stratigraphy of the injection site, as well as transfer of triggering perturbations during the injection.

Bondarenko, N. [University of Illinois Urbana‐Cham↗

Paleotopography controls weathering of Cambrian-age profiles beneath the Great Unconformity, St. Francois Mountains, SE Missouri, U.S.A.

ABSTRACT Precambrian (1.4 to 1.5 Ga) granite and rhyolite in the St. Francois Mountains at the northeast corner of the Ozark Plateau in Missouri has been altered down to a depth up to 8 meters below the Great Unconformity (the contact between Paleozoic sedimentary rock and underlying Precambrian). Petrographic, geochemical, and mineralogic data indicate that at least two events generated this alteration: 1) surficial weathering due to subaerial exposure of the granite before Cambrian burial—this material is preserved as a paleosol; and 2) alteration due to reaction with basinal fluids channeled along the unconformity from nearby sedimentary basins long after burial by Paleozoic strata. To assess the variation between surficial weathering and basinal fluid alteration, we measured and sampled for petrologic, geochemical, and mineralogic data in the rock at and just below the Great Unconformity at three paleoelevations. Whole-rock geochemical oxide and X-ray diffraction data indicate that K-metasomatism and highly crystalline illite occurred in each profile. The K increase reflects crystallization of authigenic feldspar and illite from basinal fluids that were channeled along the Great Unconformity during younger Paleozoic fluid-flow events. Each profile also exhibits an upward increase in altered feldspar crystals and highly crystalline kaolinite, and an upward decrease in Ca and Na. Such changes reflect soil formation due to reaction with meteoric water before Cambrian burial, indicating that the altered granite was a paleosol before Paleozoic basinal fluid-flow events. Notably, the paleosol at the highest paleoelevation displays the least amount of paleoweathering and the paleosol at the lowest displays the greatest amount of paleoweathering. These results demonstrate that not only can characteristics of the paleosol just below the Great Unconformity be recognized in the St. Francois Mountains, despite subsequent alteration, but also it is possible to detect variations in soil thickness that were controlled by slope steepness and, therefore, water availability and/or soil creep or failure. This spatial relationship is compatible with studies of modern soils which indicate that soil character varies with position on a slope.

Geology↗

Geochemical and isotopic evidence for paleoredox conditions during deposition of the Devonian-Mississippian New Albany Shale, southern Indiana

The upper part of the New Albany Shale is divided into three members. In ascending order, these are (1) the Morgan Trail Member, a laminated brownish-black shale; (2) the Camp Run Member, an interbedded brownish-black and greenish-gray shale; and (3) the Clegg Creek Member, also a laminated brownish-black shale. The Morgan Trail and Camp Run Members contain 5% to 6% total organic carbon (TOC) and 2% sulfide sulfur. Isotopic composition of sulfide in these members ranges from -5.0% to -20.0%. C/S plots indicate linear relationships between abundances of these elements, with a zero intercept characteristic of sediments deposited in a non-euxinic marine environment. Formation of diagenetic pyrite was carbon limited in these members. The Clegg Creek Member contains 10% to 15% TOC and 2% to 6% sulfide sulfur. Isotopic compositions of sulfide range from -5.0% to -40%. The most negative values occur in the uppermost Clegg Creek Member and are characteristic of syngenetic pyrite, formed within an anoxic water column. Abundances of carbon and sulfur are greater and uncorrelated in this member, consistent with deposition in as euxinic environment. In addition, DOP (degree of pyritization) values suggest that formation of pyrite was generally iron limited throughout Clegg Creek deposition, but sulfur isotopes indicate that syngenetic (water-column) pyrite becomes an important component in the sediment only in the upper part of the member. At the top of the Clegg Creek Member, a zone of phosphate nodules and trace-metal enrichment coincides with maximal TOC values. During euxinic deposition, phosphate and trace metals accumulated below the chemocline because of limited vertical circulation in the water column. Increased productivity would have resulted in an increased flux of particulate organic matter to the sediment, providing an effective sink for trace metals in the water column. Phosphate and trace metals released from organic matter during early diagenesis resulted in precipitation of metal-rich phosphate nodules.

NASA Discipline Exobiology↗

Soil and Water Chemistry and Trace Metal Extractability and Speciation in Wetland Soils from Illinois and South Carolina and Stream Sediments from Tennessee

Dataset revised on October 15, 2021. This revision adds sulfur and iron X-ray absorption near-edge structure spectra for the wetland soils and stream sediments from the field areas. It also renames the sample locations in a way that is more intuitive to readers of the companion paper that is under review. Finally, the data filenames and organization have been updated in their labeling to parallel the data sources in the associated paper. The abstract text and methods were also revised to reflect the data that was added to the dataset.Trace metals are essential for microbially-mediated biogeochemical processes occurring in anoxic wetland soils and stream bed sediments, such as denitrification, methanogenesis, and mercury methylation. Low availability of these elements may potentially inhibit key components of anaerobic carbon and nitrogen cycling and contaminant transformation. The solid-phase speciation of trace metals likely plays an important role in controlling their bioavailability. Metal speciation is well studied in contaminated soils and sediments as well as those naturally elevated in trace metals. However, less is known regarding the chemical forms of trace metals in systems having concentrations similar to geological background levels, the very settings where metal limitations may be most prevalent. We have investigated trace metal concentrations, extractability, and solid-phase speciation in three freshwater subsurface aquatic systems: marsh wetland soils, riparian wetland soils, and the sediments of a streambed.Data are provided for marsh wetland soils at Argonne National Laboratory, riparian wetland soils in the Tims Branch watershed at Savannah River National Laboratory, and stream bed sediments from East Fork Poplar Creek near Oak Ridge National Laboratory. Soil and sediment elemental abundances, mineralogy, and extractable nutrients as well as dissolved major elements, anions, trace metals, and nutrients in the overlying surface waters are provided. In addition, the results of sequential chemical extraction for the trace metals cobalt, nickel, copper, and zinc from the soils and sediment are reported as well as X-ray absorption near-edge structure (XANES) spectra in these materials are reported. To aid interpretation of these data, XANES spectra of sulfur in the soils and sediments as well as both XANES and extended X-ray absorption fine structure (EXAFS) spectra of iron in these materials are reported. The data package also includes the XANES spectra of reference standards and a potential interferent in the measurements. All data are provided in text-based CSV format with header sections indicating the data contained in each file and the corresponding units. Note that "u" is used in place of Greek lower case mu to indicate the micro prefix on units.

54 ENVIRONMENTAL SCIENCES↗

Bacterial mineralization patterns in basaltic aquifers: implications for possible life in martian meteorite ALH84001

To explore the formation and preservation of biogenic features in igneous rocks, we have examined the organisms in experimental basaltic microcosms using scanning and transmission electron microscopy. Four types of microorganisms were recognized on the basis of size, morphology, and chemical composition. Some of the organisms mineralized rapidly, whereas others show no evidence of mineralization. Many mineralized cells are hollow and do not contain evidence of microstructure. Filaments, either attached or no longer attached to organisms, are common. Unattached filaments are mineralized and are most likely bacterial appendages (e.g., prosthecae). Features similar in size and morphology to unattached, mineralized filaments are recognized in martian meteorite ALH84001.

NASA Discipline Exobiology↗