Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GLASS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

4 d element induced improvement of structural disorder and development of weakly reentrant spin-glass behavior in NiRuMnSn

The pursuit of efficient spin polarization in quaternary Heusler alloys with the general formula XX'YZ (where X, X', and Y are transition metals and Z is a p-block element) has been a subject of significant scientific interest. While previous studies showed that isoelectronic substitution of a 4d element in place of a 3d element in quaternary Heusler alloys improves the half-metallic ferromagnetic characteristics, our research here, on the quaternary Heusler alloy NiRuMnSn, reveals a strikingly different scenario. In this study, we present a detailed structural analysis of the material using x-ray absorption fine structure and neutron diffraction techniques which confirms the formation of a single-phase compound with 50:50 site disorder between Ni and Ru atoms at 4c and 4d sites. Contrary to expectations, our density functional theory calculations suggest a considerable decrease in spin polarization even in the ordered structure. Additionally, we report on the compound's exceptional behavior, displaying a rare reentrant spin-glass property below ~ 60 K, a unique and intriguing feature for quaternary Heusler-type compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Hopping crossover and high-temperature superspin glass behavior in Ni films deposited on MoS 2

Realizing the potential of MoS 2 and other two-dimensional semiconductors in spintronic devices requires a fundamental understanding of their interaction with ferromagnetic metals. We have investigated the transport and magnetic properties of thin Ni films grown on single-crystal MoS 2 substrates. The Ni is found to have a granular morphology with an average grain size of approximately 2 nm. Like previously investigated granular Ni/insulator composites below the percolation threshold, transport is found to proceed via hopping. However, our Ni/MoS 2 sample exhibits a dual crossover: activated hopping to 𝑇−1/2 variable-range hopping at a higher temperature and then a transition to power-law behavior at a lower temperature. The magnetoresistance was used as a novel probe for uncovering superspin-glass-like behavior above room temperature in the Ni/MoS 2 nanostructure, which also exhibits a collective ferromagnetic state at very low temperatures, reminiscent of superferromagnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Nature of temperature chaos in spin glasses

Temperature chaos (TC) in spin glasses has been claimed to exist no matter how small the temperature change, Δ⁢T. However, experimental studies have exhibited a finite value of Δ⁢T for a transition to TC. This paper explores the onset of TC with much higher resolution than before and over a larger temperature range. We find that TC is always present, though small at the smallest Δ⁢T that we can reliably measure. However, it grows rapidly as Δ⁢T increases, the region of rapid growth coinciding with the Δ⁢T predicted from renormalization group arguments and observed experimentally. Here, we are able to transcend the full range of TC, from the completely reversible state to one that is maximally decorrelated from the initially prepared state.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Quantifying Memory in Spin Glasses

Rejuvenation and memory, long considered the distinguishing features of spin glasses, have recently been proven to result from the growth of multiple length scales. This insight, enabled by simulations on the Janus II supercomputer, has opened the door to a quantitative analysis. We combine numerical simulations with comparable experiments to introduce two coefficients that quantify memory. A third coefficient has been recently presented by Freedberg et al. Here, we show that these coefficients are physically equivalent by studying their temperature and waiting-time dependence.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structural and thermodynamic characterization of CuZr metallic glass nanoparticles: Insights from atomistic simulations

Metallic crystalline nanoparticles (NPs) have been shown to display intriguing size-dependent properties. However, the properties of metallic glass (MG) NPs remain largely unexplored. Here, using molecular dynamics simulations, we produce Cu 64 Zr 36 MG NPs ranging in size from 1 to 20 nm by cooling molten systems at a relatively slow rate of 10 9 K/s. Results indicate that NPs are coated with a Cu-rich layer with a thickness that increases with NP size. We employ various simulated rates of heating, from 10 11 to 10 13 K/s, to determine the melting points of these NPs. The results show a significant decrease in the solidus temperature for NPs smaller than 10 nm. Furthermore, as NP size decreases, the fraction of Cu full icosahedra within the NPs increases, suggesting that smaller NPs are stronger and harder. These findings provide insights for designing heterogeneous metallic nanoglass materials that leverage the size-dependent properties of MG NPs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Magnetic polarons and spin-glass behavior in insulating La 1-x Sr x CoO 3 (x = 0.125 and 0.15)

The evolution of magnetic polarons in Sr doped La Co O 3 ( La 1 - x Sr x Co O 3 ) single crystal and polycrystalline samples are investigated by employing dc and ac magnetic measurement and small angle neutron scattering (SANS) techniques. The effect of magnetic field and temperature on magnetic polarons is experimentally studied for La 0.875 Sr 0.125 Co O 3 and La 0.85 Sr 0.15 Co O 3 compounds that belong to the spin glass insulating regime of the broader compositional phase diagram of this system. Langevin analyses of the isothermal magnetization curves in the notional paramagnetic regime prove the existence of magnetic polarons with large moments. The dc field superimposed ac susceptibility data and the analysis of the glassy dynamics prove that the size of polarons in 15% Sr doped crystal increase as the field is increased while the field effect is not visible in the 12.5% Sr doped crystal. A polycrystalline sample of La 0.85 Sr 0.15 Co O 3 is analyzed by SANS experiments, which confirm nonzero correlation length at temperatures far above the macroscopic ordering temperature and hence the presence of magnetic polarons.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Phase patterning of metallic glasses through superfast quenching of ion irradiation-induced thermal spikes

Amorphous metallic glasses (MGs) convert to crystalline solids upon annealing at a high temperature. Such a phase change, however, does not occur with the local melting caused by damage cascades introduced by ion irradiation, although the resulting thermal spikes can reach temperatures > 1000 K. This is because the quenching rate of the local melting zone is several orders of magnitude higher than the critical cooling rate for MG formation. Thus the amorphous structure is sustained. This mechanism increases the highest temperature at which irradiated MG sustains amorphous phase. More interestingly, if an irradiated MG is pre-annealed to form a polycrystalline structure, ion irradiation can locally convert this crystalline phase to an amorphous phase if the grains are nanometers in size and comparable to the damage cascade volume size. Combining pre-annealing and site selective ion irradiation, patterned crystalline-amorphous heterogeneous structures have been fabricated. This finding opens new doors for various applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Multiscale modeling of shear banding in metallic glasses (Final report)

Metallic glasses (MGs) possess remarkably high strength but suffer from minimal tensile ductility due to the formation of catastrophic shear bands. The goal of this research project is to develop an understanding of the microstructures and deformation mechanisms that control shear banding in MGs, which will enable the development of MGs with enhanced plasticity. Two scientific objectives have been pursued. (1) Understand the underlying mechanisms of shear banding phenomena in presence of nanoscale heterogeneities in MGs. (2) Understand the evolution of MG heterogenous structure upon thermomechanical stimuli for plasticity enhancement through controlling and distributing multiple shear bands.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Analysis of the Sludge Batch 9 (Macrobatch 11) DWPF Pour Stream Glass Sample Collected During the Nitric-Glycolic Acid Flowsheet Transition

A pour stream (PS) sample taken near the end of processing of Sludge Batch 9 (SB9, Macrobatch 11) during the transition to the nitric-glycolic acid (NGA) flowsheet was analyzed by the Savannah River National Laboratory (SRNL). The SB9 NGA PS sample was taken on 12/18/2022 during Melter Feed Batch 823 associated with glass canister S04773 and was transferred to SRNL in Primary Container PC0139 in February 2023.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Data Qualification Report: SRNL Glass Composition-Properties (ComPro) Database

The Savannah River National Laboratory Glass Composition-Properties (ComPro) database is an extensive database containing pertinent composition and durability data to support the accelerated clean-up mission at the Defense Waste Processing Facility. The activities described in this data qualification report were performed to support the information contained in the database. There were two objectives of the original data qualification process. The first objective was to review supporting documentation to determine if DOE/RW-0333P Quality Assurance Requirements and Description had been implemented during the original work. If the DOE/RW-0333P Quality Assurance Requirements and Description had not been directly implemented during the original work, the second objective was to determine if the controls that were used were adequate to meet the intent of the DOE/RW-0333P Quality Assurance Requirements and Description. The results of these two objectives and the activities performed to support these decisions are described in this document. An assessment of each dataset was made to determine if the data were RW-0333P Compliant, RW-0333P Equivalent or Non-RW-0333P Compliant. The original data qualification was performed in accordance with E7, Conduct of Engineering Manual, Procedure 3.70, Revision 4, Qualification of Data. The specific method that was used was Equivalent Controls as described in E7, 3.70. Revision 2 of this document adds supporting information for the RW-0333P Compliant datasets added to Revision 3 of the database.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Structural Principles in Liquids and Glasses: Bottom-Up or Top-Down

The conventional approach to elucidate the atomic structure of liquid and glass is to start with local structural units made of several atoms, and to use them as building blocks to form a global structure, the bottom-up approach. We propose to add an alternative top-down approach in which we start with a global high-temperature gas state and then apply interatomic potentials to all atoms at once. This causes collective density wave instability in all directions with the same wavelength. These two driving forces, local and global, are in competition and are mutually frustrated. The final structure is determined through the compromise of frustration between these two, which creates the medium-range-order. This even-handed approach on global and local potential energy landscapes explains the distinct natures of short-range order and medium-range order, and strong temperature dependence of various properties of liquid.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Degradation of Insulating Glass Units: Thermal Performance, Measurements and Energy Impacts

Insulating glass unit (IGU) degradation has been studied extensively. However, there is limited understanding of how present durability evaluation standards relate to product lifetime. Furthermore, there is debate on how to quantify performance of installed windows over time to better understand degradation processes. More knowledge on these topics is required to link durability evaluation to product lifetime projections based on energy performance. Energy models provide helpful estimations of total annual building energy consumption. However, most models are based on “as installed” performance of envelope components and fail to account for performance degradation. This can lead to an underestimation of building lifetime energy consumption. A better understanding of the relationship between durability and energy performance can inform integration of degradation dynamics into energy modeling software. This will improve lifetime building energy consumption estimations as well as inform appropriate retrofit strategies and timing. This paper reviews current durability literature, various standards for window performance ratings and weathering methods, existing in situ IGU energy performance measurement techniques, and whole-building energy effects. The challenges and disparities among various studies are analyzed and discussed. The authors hope that further work in this area will lead to the development of improved in situ test methods to assess IGU degradation in the field and link this knowledge to improved energy performance modeling approaches.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Chalcogenide Glass-Capped Fiber-Optic Sensor for Real-Time Temperature Monitoring in Extreme Environments

We demonstrate a novel chalcogenide glass (ChG)-capped optical fiber temperature sensor capable of operating within harsh environment. The sensor architecture utilizes the heat-induced phase change (amorphous-to-crystalline) property of ChGs, which rapidly (80–100 ns) changes the optical properties of the material. The sensor response to temperature variation around the phase change of the ChG cap at the tip of the fiber provides abrupt changes in the reflected power intensity. This temperature is indicative of the temperature at the sensing node. We present the sensing performance of six different compositions of ChGs and a method to interpret the temperature profile between 440 °C and 600 °C in real-time using an array structure. The unique radiation-hardness property of ChGs makes the devices compatible with high-temperature and high-radiation environments, such as monitoring the cladding temperature of Light Water (LWR) or Sodium-cooled Fast (SFR) reactors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗