Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLUORINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Synthesis of LaRhAsO and superconductivity within the LaFe{sub 1-x}Rh{sub x}AsO system

The compound LaRhAsO is reported for the first time. We show that an entire LaFe{sub 1-x}Rh{sub x}AsO solid solution is possible. Powder X-ray diffraction, resistivity and magnetic measurements were carried out on polycrystalline samples. Superconductivity onset is observed for x = 0.05, 0.10, and 0.15 with a maximum resistivity T{sub c}{sup onset} of {approx}16 K. The fluorine doped samples of the new compound LaRhAsO remain metallic down to 5 K.

36 MATERIALS SCIENCE↗

Preparation and characterization of indium doped CdS{sub 0.2}Se{sub 0.8} thin films by spray pyrolysis

The CdS{sub 0.2}Se{sub 0.8} and indium doped CdS{sub 0.2}Se{sub 0.8} thin films have been deposited onto the amorphous glass and fluorine doped tin oxide coated glass substrates by spray pyrolysis. The doping concentration of indium has been optimized by photoelectrochemical characterization technique. The structural, surface morphological, optical and electrical properties of CdS{sub 0.2}Se{sub 0.8} and indium doped CdS{sub 0.2}Se{sub 0.8} thin films have been studied. X-ray diffraction studies reveal that the films are polycrystalline in nature with hexagonal crystal structure. Scanning electron microscopy studies reveal that the grains are uniform with uneven spherically shaped, distributed over the entire substrate surface. The complete surface morphology has been changed after doping. In optical studies, the transition of the deposited films is found to be direct allowed with optical energy gaps decreasing from 1.91 to 1.67 eV with indium doping. Semiconducting behavior has been observed from resistivity measurements. The thermoelectric power measurements reveal that the films exhibit n-type conductivity.

36 MATERIALS SCIENCE↗

Large-area SnO{sub 2}: F thin films by offline APCVD

Highlights: {yields} Large-area (1245 mm x 635 mm) FTO thin films were successfully deposited by offline APCVD process. {yields} The as-prepared FTO thin films with sheet resistance 8-11 {Omega}/{open_square} and direct transmittance more than 83% exhibited better than that of the online ones. {yields} The maximum quantum efficiency of the solar cells based on offline FTO substrate was 0.750 at wavelength 540 nm. {yields} The power of the solar modules using the offline FTO as glass substrates was 51.639 W, higher than that of the modules based on the online ones. -- Abstract: In this paper, we reported the successful preparation of fluorine-doped tin oxide (FTO) thin films on large-area glass substrates (1245 mm x 635 mm x 3 mm) by self-designed offline atmospheric pressure chemical vapor deposition (APCVD) process. The FTO thin films were achieved through a combinatorial chemistry approach using tin tetrachloride, water and oxygen as precursors and Freon (F-152, C2H4F2) as dopant. The deposited films were characterized for crystallinity, morphology (roughness) and sheet resistance to aid optimization of materials suitable for solar cells. We got the FTO thin films with sheet resistance 8-11 {Omega}/{open_square} and direct transmittance more than 83%. X-ray diffraction (XRD) characterization suggested that the as-prepared FTO films were composed of multicrystal, with the average crystal size 200-300 nm and good crystallinity. Further more, the field emission scanning electron microscope (FESEM) images showed that the films were produced with good surface morphology (haze). Selected samples were used for manufacturing tandem amorphous silicon (a-Si:H) thin film solar cells and modules by plasma enhanced chemical vapor deposition (PECVD). Compared with commercially available FTO thin films coated by online chemical vapor deposition, our FTO coatings show excellent performance resulting in a high quantum efficiency yield for a-Si:H solar cells and ideal open voltage and short circuit current for a-Si:H solar modules.

36 MATERIALS SCIENCE↗

Effects of TiO{sub 2} film thickness on photovoltaic properties of dye-sensitized solar cell and its enhanced performance by graphene combination

Graphical abstract: - Highlights: • DSSC based on TiO{sub 2} film with 8 printing layers showed the highest efficiency. • The photoelectric conversion efficiency of the DSSC increased from 5.52% to 6.49% by graphene combination. • A mechanism for the enhanced performance of the DSSC was proposed. - Abstract: Dye-sensitized solar cells based on TiO{sub 2} films with different printing layers (6-10) were fabricated by screen printing method. The prepared samples were characterized by scanning electron microscopy, X-ray diffraction and UV–vis absorption spectroscopy. The effects of thickness on the photoelectric conversion performance of the as-fabricated DSSCs were investigated. An optimum photoelectric conversion efficiency of 5.52% was obtained in a DSSC with 8 printing layers. Furthermore, after a moderate amount of graphene was combined with TiO{sub 2}, the photoelectric conversion efficiency of the DSSC based on graphene/TiO{sub 2} composite film rose from 5.52% to 6.49%, with an increase of η by 17.6%. The results indicated that graphene not only enhances the transport of electrons from the film to the fluorine doped tin oxide substrates and reduces the charge recombination rate, but also reduces the electrolyte–electrode interfacial resistance, clearly increasing the photoelectric conversion efficiency.

36 MATERIALS SCIENCE↗

∼2 μm fluorescence radiative dynamics and energy transfer between Er{sup 3+} and Tm{sup 3+} ions in silicate glass

Graphical abstract: - Highlights: • A Er{sup 3+}/Tm{sup 3+} co-doped silicate glass with good thermal stability (k{sub gl} = 0.402 for STE glass) is prepared. • Efficient ∼2 μm emission is observed under 808 nm and 980 nm laser excitation. • The glass structure and spectroscopic properties are confirmed by optical absorption, IR transmission, Raman and fluorescence studies. • The content of OH groups deceases efficiently after fluorine ions are introduced. • The energy transfer coefficient from Er{sup 3+} to Tm{sup 3+} in STFE glass is 13.39 × 10{sup −40} cm{sup 6}/s. - Abstract: A Er{sup 3+}/Tm{sup 3+} co-doped silicate glass with good thermal stability is prepared by melt-quenching method. An efficient emission of ∼2 μm is observed under different selective laser excitations. The optical absorption and transmission spectra, Raman spectra, and emission spectra are tested to characterize ∼2 μm emission properties of Er{sup 3+}/Tm{sup 3+} co-doped silicate glasses and a reasonable energy transfer mechanism of ∼2 μm emission between Er{sup 3+} and Tm{sup 3+} ions is proposed. Based on the optical absorption spectra, the Judd–Ofelt parameters and radiative properties were calculated. Intense ∼2 μm emission is obtained from Er{sup 3+}/Tm{sup 3+} co-doped silicate glasses due to the efficient energy transfer from Er{sup 3+} to Tm{sup 3+} ions. The energy transfer coefficient from Er{sup 3+} to Tm{sup 3+} ions can reach as high as 13.39 × 10{sup −40} cm{sup 6}/s. In addition, the population of the OH groups is decreased and the ∼2 μm emission is effectively enhanced with fluoride introduction. The emission property, together with good thermal property, indicates that Er{sup 3+}/Tm{sup 3+} co-doped silicate glass is a potential kind of laser glass for efficient ∼2 μm laser.

36 MATERIALS SCIENCE↗

Improving photoelectrochemical performance by building Fe{sub 2}O{sub 3} heterostructure on TiO{sub 2} nanorod arrays

Highlights: • Fe{sub 2}O{sub 3}@TiO{sub 2} heterostructure was fabricated by two-step method. • The photoelectrochemical properties were studied upon visible light irradiation. • Fe{sub 2}O{sub 3}@TiO{sub 2} heterostructure shows superior photoelectrochemical property. • A possible mechanism for enhanced photoelectrochemical property was put forward. - Abstract: Fe{sub 2}O{sub 3}@TiO{sub 2} heterostructure nanorod arrays were synthesized on a fluorine-doped tin oxide conductive (FTO) glass substrate via two-step method for improving photoelectrochemical activity of TiO{sub 2}. The TiO{sub 2} nanorod arrays on FTO substrate were first prepared by hydrothermal method and then Fe{sub 2}O{sub 3} nanoparticles were coated onto the surface of TiO{sub 2} nanorod arrays through chemical bath deposition. The heterojunction yielded a photocurrent density of 39.75 μA cm{sup −2} at a bias potential of 0 V (vs. Ag/AgCl) under visible light irradiation, which is 2.2 times as much as that produced by the pure TiO{sub 2} nanorod arrays. The enhanced photoelectrochemical activity is attributed to the extension of the light response range and efficient separation of photogenerated carriers. Our results have demonstrated the advantage of the novel Fe{sub 2}O{sub 3}@TiO{sub 2} heterojunction and will provide a new path to the fabrication of heterostructural materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Acid-free approach towards the growth of vertically aligned TiO2 nanorods as an efficient photoanode for dye-sensitized solar cells

Highlights: • Vertically aligned TiO{sub 2} NRs are fabricated by an acid-free hydrothermal approach. • Study the effect of TiO{sub 2} NRs growth parameters on its structural/optical properties. • The optimized TiO{sub 2} NRs were employed as an efficient photoanode for DSSCs. • An optimal PCE of 2.45% was achived by DSSC with TiO{sub 2} NRs with heights of ∼1.56 μm. - Abstract: We synthesized the closely packed titanium dioxide nanorods (TiO{sub 2} NRs) on fluorine-doped tin oxide (FTO) glass by a facile and cost-effective hydrothermal method. The TiO{sub 2} NRs were further utilized as a photoanode for dye-sensitized solar cells (DSSCs). For hydrothermal growth of TiO{sub 2} NRs, we utilized an acid-free reaction medium instead of a strong acidic medium, which can reduce the equipment cost as well as the environmental damages. Before employing these TiO{sub 2} NRs for DSSCs as a photoanode, the effects of hydrothermal growth parameters on the structural and optical characteristics of TiO{sub 2} NRs/FTO glass were investigated. Eventually, the TiO{sub 2} NRs with optimized height and diameter were employed to DSSCs and their photovoltaic characteristics were examined.

14 SOLAR ENERGY↗

The dye-sensitized solar cells based on the interconnected ternary cobalt diindium sulfide nanosheet array counter electrode

Highlights: • The ternary CoIn{sub 2}S{sub 4} CE was fabricated by in situ solvothermal synthesis. • The CoIn{sub 2}S{sub 4} CE displays an interconnected nanosheet array structure. • The solvent and In{sub 2.77}S{sub 4} intermediate play key roles on the formation of CoIn{sub 2}S{sub 4}. • DSSC based on the CoIn{sub 2}S{sub 4} CE gives an efficiency of 8.83%. - Abstract: The ternary cobalt diindium sulfide (CoIn{sub 2}S{sub 4}) counter electrode (CE) with interconnected nanosheet array structure is fabricated on the fluorine-doped tin oxide (FTO) substrate by in situ ethanol solvothermal synthesis. The ethanol solvent and In{sub 2.77}S{sub 4} intermediate play important roles on the formation of the interconnected nanosheet array structure. The dye-sensitized solar cell (DSSC) with the optimized ternary CoIn{sub 2}S{sub 4} CE gives an energy conversion efficiency of 8.83%, which is much higher than that of DSSCs based on the binary CoS{sub 2} (6.47%), and In{sub 2.77}S{sub 4} (0.46%) CEs and can be comparable with that of Pt CE (8.19%) under full sunlight illumination (100 mW cm{sup −2}, AM 1.5 G). Except for the intrinsically electrocatalytic activity from the CoIn{sub 2}S{sub 4}, the higher conversion efficiency of CoIn{sub 2}S{sub 4} based DSSC can be attributed to that the interconnected nanosheet array structure provides plentiful catalytic active sites, abundant electron transport channels, and fast electrolyte diffusion.

14 SOLAR ENERGY↗

Surface morphology and photoelectric properties of FTO ceramic thin films under a simple transparent cover-assisted laser annealing

Highlights: • A simple transparent cover-assisted laser annealing method was employed on FTO films. • The presence of coverslip or PET significantly affected the film surface morphology. • Coverslip- or PET-assisted laser annealing greatly increased grain size of the film. • The PET-assisted laser annealed FTO film exhibited the best photoelectric property. - Abstract: A simple transparent cover-assisted laser annealing strategy, which used a coverglass or a PET sheet as the transparent cover, was proposed to improve photoelectric properties of fluorine-doped tin oxide (FTO) thin films. Pure laser annealing was also performed for comparison. Transparent cover-assisted laser annealing was found to be more effective for producing densely distributed particles, decreasing surface roughness and increasing grain size, thus enhancing transmittance and conductivity of the film. More importantly, compared with coverglass-assisted laser annealing, PET-assisted laser annealing enabled the film surface to be covered with more uniform and denser particles and exhibit a remarkable increase in grain size. Therefore the film had the highest total transmittance of 84.32%, the highest specular transmittance of 75.88%, a slightly decreased haze of 10.01% and the lowest sheet resistance of 7.36 Ω/sq. The simple PET-assisted laser annealing method may be a promising substitution for the conventional laser annealing treatment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrahigh coulombic efficiency electrolyte enables Li||SPAN batteries with superior cycling performance

Raising the coulombic efficiency of lithium metal anode cycling is the deciding step in realizing long-life rechargeable lithium batteries. Here, we designed a highly concentrated salt/ether electrolyte diluted in a fluorinated ether: 1.8 M LiFSI in DEE/BTFE (diethyl ether/bis(2,2,2-trifluoroethyl)ether), which realized an average coulombic efficiency of 99.37% at 0.5 mA cm -2 and 1 mAh cm -2 for more than 900 cycles. This electrolyte also maintained a record coulombic efficiency of 98.7% at 10 mA cm -2 , indicative of its ability to provide fast-charging with high cathode loadings. Morphological studies reveal dense, dendrite free Li depositions after prolonged cycling, while surface analyses confirmed the formation of a robust LiF-rich SEI layer on the cycled Li surface. Moreover, we discovered that this ether-based electrolyte is highly compatible with the low-cost, high-capacity SPAN (Sulfurized polyacrylonitrile) cathode, where the constructed Li||SPAN cell exhibited reversible cathode capacity of 579 mAh g -1 and no capacity decay after 1200 cycles. A cell where a high areal loading SPAN electrode (>3.5 mAh cm -2 ) is paired with only onefold excess Li was constructed and cycled at 1.75 mA cm -2 , maintaining a coulombic efficiency of 99.30% for the lithium metal. Computational simulations revealed that at saturation, the Li-FSI complex forms contact ion pairs, with a first solvation shell comprising DEE molecules, and a second solvation shell with a mix of DEE/BTFE. This study provides a path to enable high energy density Li||SPAN batteries with stable cycling.

36 MATERIALS SCIENCE↗

Volumetric-modulated arc therapy (RapidArc) vs. conventional fixed-field intensity-modulated radiotherapy for {sup 18}F-FDG-PET-guided dose escalation in oropharyngeal cancer: A planning study

Fluorine-18-fluorodeoxyglucose-positron emission tomography ({sup 18}F-FDG-PET)–guided focal dose escalation in oropharyngeal cancer may potentially improve local control. We evaluated the feasibility of this approach using volumetric-modulated arc therapy (RapidArc) and compared these plans with fixed-field intensity-modulated radiotherapy (IMRT) focal dose escalation plans. Materials and methods: An initial study of 20 patients compared RapidArc with fixed-field IMRT using standard dose prescriptions. From this cohort, 10 were included in a dose escalation planning study. Dose escalation was applied to {sup 18}F-FDG-PET–positive regions in the primary tumor at dose levels of 5% (DL1), 10% (DL2), and 15% (DL3) above standard radical dose (65 Gy in 30 fractions). Fixed-field IMRT and double-arc RapidArc plans were generated for each dataset. Dose-volume histograms were used for plan evaluation and comparison. The Paddick conformity index (CI{sub Paddick}) and monitor units (MU) for each plan were recorded and compared. Both IMRT and RapidArc produced clinically acceptable plans and achieved planning objectives for target volumes. Dose conformity was significantly better in the RapidArc plans, with lower CI{sub Paddick} scores in both primary (PTV1) and elective (PTV2) planning target volumes (largest difference in PTV1 at DL3; 0.81 ± 0.03 [RapidArc] vs. 0.77 ± 0.07 [IMRT], p = 0.04). Maximum dose constraints for spinal cord and brainstem were not exceeded in both RapidArc and IMRT plans, but mean doses were higher with RapidArc (by 2.7 ± 1 Gy for spinal cord and 1.9 ± 1 Gy for brainstem). Contralateral parotid mean dose was lower with RapidArc, which was statistically significant at DL1 (29.0 vs. 29.9 Gy, p = 0.01) and DL2 (29.3 vs. 30.3 Gy, p = 0.03). MU were reduced by 39.8–49.2% with RapidArc (largest difference at DL3, 641 ± 94 vs. 1261 ± 118, p < 0.01). {sup 18}F-FDG-PET–guided focal dose escalation in oropharyngeal cancer is feasible with RapidArc. Compared with conventional fixed-field IMRT, RapidArc can achieve better dose conformity, improve contralateral parotid sparing, and uses fewer MU.

61 RADIATION PROTECTION AND DOSIMETRY↗

Solvation-protection-enabled high-voltage electrolyte for lithium metal batteries

To facilitate the practical application of lithium metal batteries (LMBs), stable interfaces between the electrolyte and the lithium metal must be achieved. Herein, we introduce a solvation protection strategy for designing a functional electrolyte for high-voltage LMBs. Fluoroethylene carbonate (FEC) was introduced as a solvation protection solvent for the difluoroethylene carbonate (DFEC)/trifluoroethyl methyl carbonate (FEMC) electrolyte system to enable the cycling of lithium metal anode. The addition of FEC alters the structures of lithium complexes in solution because of its relatively high solvating power. Through the precise control of the solvation number (> 1) of fluorinated cyclic carbonate (i.e., FEC:DFEC > critical ratio), lithium complexes with Li + solvated solely by FEMC, which decompose on the lithium surface to form detrimental by-products, can be effectively eliminated. Here, the new ternary FEC/DFEC/FEMC system not only maintains the beneficial effect of DFEC in forming a robust solid-electrolyte interphase on the lithium anode, but also confers outstanding anodic stability provided by FEMC, while eliminating detrimental FEMC decomposition through the solvation protection effect of FEC. Clearly, this ternary system outperforms the FEC/FEMC and DFEC/FEMC binary systems in facilitating the stable cycling of LMBs.

25 ENERGY STORAGE↗

Synthesis and post-heating treatment of inorganic NaF·Na 3 SbS 4 solid electrolytes

Sulfide-type sodium (Na) solid electrolytes (SEs) with halide doping have attracted serious interest due to their high ionic conductivity and great potential in solid-state Na batteries. While other halogens such as Cl, Br, I have been studied to enhance Na-ion transport in sulfide-type SEs, the introduction of fluorine (F) is rarely investigated. Moreover, synthetic parameters such as heating treatment temperatures strongly influence the structure and conductive properties of halide-doped sulfide SEs. Herein, we prepared xNaF·(1-x)Na 3 SbS 4 nanocomposites with varying concentration of F using a low-temperature (150 °C) heating method, and studied the effects of post-heating treatment on structure and conductivity. In-situ neutron diffraction was employed to investigate the structural evolution of X-doped Na 3 SbS 4 (X = F, Cl) during the post-heating treatment and cooling process. In addition, the post-heating treatment at 300 °C leads to increased ionic conductivity of xNaF·(1-x)Na 3 SbS 4 nanocomposites with various F contents. After 300 °C post-heating treatment, 0.2NaF·0.8Na 3 SbS 4 exhibited the highest conductivity of 0.48 mS cm –1 at room temperature. Moreover, improved electrochemical stability was also observed in Na-Sn symmetric cells, specially, with prolonged stable cycling for 300 h and much lower polarization voltage (<0.35 V). Furthermore, this work highlights the importance of post-heating treatment on the structural evolution and its role in exploring new halide-incorporated sulfide-type SEs, promoting the development of inorganic solid-state ionic conductors.

25 ENERGY STORAGE↗

Chemically deposited CdS by an ammonia-free process for solar cells window layers

Chemically deposited CdS window layers were studied on two different transparent conductive substrates, namely indium tin oxide (ITO) and fluorine doped tin oxide (FTO), to determine the influence of their properties on CdS/CdTe solar cells performance. Three types of CdS films obtained from different chemical bath deposition (CBD) processes were studied. The three CBD processes employed sodium citrate as the complexing agent in partial or full substitution of ammonia. The CdS films were studied by X-ray diffraction, optical transmission spectroscopy and atomic force microscopy. CdS/CdTe devices were completed by depositing 3 {mu}m thick CdTe absorbent layers by means of the close-spaced vapor transport technique (CSVT). Evaporated Cu-Au was used as the back contact in all the solar cells. Dark and under illumination J-V characteristic and quantum efficiency measurements were done on the CdS/CdTe devices to determine their conversion efficiency and spectral response. The efficiency of the cells depended on the window layer and on the transparent contact with values between 5.7% and 8.7%. (author)

14 SOLAR ENERGY↗

Synthesis and characterization of Cd{sub 0.7}Pb{sub 0.3}Se thin films for photoelectrochemical solar cell

Optimum composition Cd{sub 0.7}Pb{sub 0.3}Se thin films have been deposited using the chemical bath containing cadmium sulfate octahydrate, lead nitrate, tartaric acid, potassium hydroxide, ammonia, and sodium selenosulfate onto fluorine-doped tin oxide glass substrate. The various deposition parameters such as composition of reactive bath, pH of the solution, deposition temperature, deposition time, speed of rotation, etc. have been optimized for obtaining good quality film. X-ray diffraction studies revealed the polycrystalline nature of sample with the solid solution of lead (II) ions in CdSe host lattice, having a hexagonal phase structure. Scanning electron micrograph suggested that the grains were non-uniformly distributed over the substrate surface. Film composition was determined by atomic absorption spectroscopy as well as energy dispersive X-ray atomic spectroscopy. Optical absorption data showed the presence of direct transition with energy band gap 1.80 eV for the deposited thin films. The dark specific conductance of Cd{sub 0.7}Pb{sub 0.3}Se thin films was found to the order of 10{sup -6} ({omega} cm){sup -1} having n-type semiconducting nature. Photoelectrochemical characterization was carried out using sulfide/polysulfide electrolyte with 1.401% efficiency. (author)

14 SOLAR ENERGY↗

Photoelectrochemical properties of spray deposited n-CdSe thin films

Polycrystalline cadmium selenide (CdSe) thin films have been prepared by spraying a mixture of an equimolar aqueous solutions of cadmium chloride and selenourea on preheated fluorine doped tin oxide (FTO) coated glass substrates at different substrate temperatures. The cell configuration n-CdSe/1 M (NaOH + Na{sub 2}S + S)/C is used for studying the capacitance-voltage (C-V) characteristics in dark, current-voltage (I-V) characteristics in dark and under illumination, photovoltaic power output and spectral response characteristics of the as deposited films. Photoelectrochemical study shows that as deposited CdSe thin films exhibits n-type of conductivity. The spectral response characteristics of the films at room temperature show a prominent sharp peak at 725 nm. The measured values of efficiency ({eta}) and fill factor (FF) are found to be 0.50% and 0.44 respectively for film deposited at 300 C. Electrochemical impedance spectroscopy studies show that the CdSe film deposited at 300 C shows better performance in PEC cell. (author)

14 SOLAR ENERGY↗

Influence of substrates on photoelectrochemical performance of sprayed n-CdIn{sub 2}S{sub 4} electrodes

Cadmium indium sulphide (CdIn{sub 2}S{sub 4}) electrodes have been prepared onto the preheated fluorine doped tin oxide (FTO) coated glass and stainless steel (SS) substrates at optimized deposition conditions by using spray pyrolysis. Influence of substrates on the photoelectrochemical (PEC) performance has been carried out using cell configuration n-CdIn{sub 2}S{sub 4}/1 M (NaOH + Na{sub 2}S + S)/C for studying the current-voltage (I-V), photovoltaic output, photovoltaic rise and decay, photo and spectral responses and capacitance-voltage (C-V) characteristics. The junction ideality factor in dark (n{sub D}) and light (n{sub L}), series and shunt resistances (R{sub s} and R{sub sh}), fill factor (FF) and efficiency ({eta}) for the cell have been estimated. The measured fill factor (FF) and cell efficiency ({eta}) of the cells are found to be 0.47%, 0.38%, and 1.06%, 0.38% for FTO and SS substrates respectively. The Energy band diagram of band bending has been constructed using the physical parameters estimated from Mott-Schottky plots. Mott-Schottky plots shows the flat-band potential (V{sub fb}) of CdIn{sub 2}S{sub 4} films to be -1.15 V/SCE and -0.90 V/SCE on FTO and SS substrates respectively. (author)

14 SOLAR ENERGY↗

Pharmacokinetic drivers of toxicity for basic molecules: Strategy to lower pKa results in decreased tissue exposure and toxicity for a small molecule Met inhibitor

Several toxicities are clearly driven by free drug concentrations in plasma, such as toxicities related to on-target exaggerated pharmacology or off-target pharmacological activity associated with receptors, enzymes or ion channels. However, there are examples in which organ toxicities appear to correlate better with total drug concentrations in the target tissues, rather than with free drug concentrations in plasma. Here we present a case study in which a small molecule Met inhibitor, GEN-203, with significant liver and bone marrow toxicity in preclinical species was modified with the intention of increasing the safety margin. GEN-203 is a lipophilic weak base as demonstrated by its physicochemical and structural properties: high LogD (distribution coefficient) (4.3) and high measured pKa (7.45) due to the basic amine (N-ethyl-3-fluoro-4-aminopiperidine). The physicochemical properties of GEN-203 were hypothesized to drive the high distribution of this compound to tissues as evidenced by a moderately-high volume of distribution (Vd > 3 l/kg) in mouse and subsequent toxicities of the compound. Specifically, the basicity of GEN-203 was decreased through addition of a second fluorine in the 3-position of the aminopiperidine to yield GEN-890 (N-ethyl-3,3-difluoro-4-aminopiperidine), which decreased the volume of distribution of the compound in mouse (Vd = 1.0 l/kg), decreased its tissue drug concentrations and led to decreased toxicity in mice. This strategy suggests that when toxicity is driven by tissue drug concentrations, optimization of the physicochemical parameters that drive tissue distribution can result in decreased drug concentrations in tissues, resulting in lower toxicity and improved safety margins. -- Highlights: ► Lower pKa for a small molecule: reduced tissue drug levels and toxicity. ► New analysis tools to assess electrostatic effects and ionization are presented. ► Chemical and PK drivers of toxicity can be leveraged to improve safety.

60 APPLIED LIFE SCIENCES↗