Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EROSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Secretory clusterin inhibits osteoclastogenesis by attenuating M-CSF-dependent osteoclast precursor cell proliferation

Highlights: • We describe the expression and secretion of clusterin in osteoclasts. • Endogenous clusterin deficiency does not affect osteoclast formation. • Exogenous treatment with secretory clusterin decreases osteoclast differentiation. • Secretory clusterin attenuates osteoclast precursor cell proliferation by inhibiting M-CSF-mediated ERK activation. - Abstract: Secretory clusterin (sCLU)/apolipoprotein J is a multifunctional glycoprotein that is ubiquitously expressed in various tissues. Reduced sCLU in the joints of patients with bone erosive disease is associated with disease activity; however, its exact role has yet to be elucidated. Here, we report that CLU is expressed and secreted during osteoclastogenesis in mouse bone marrow-derived macrophages (BMMs) that are treated with receptor activator of nuclear factor kappa-B ligand (RANKL) and macrophage colony-stimulating factor (M-CSF). CLU-deficient BMMs obtained from CLU{sup −/−} mice exhibited no significant alterations in OC differentiation in comparison with BMMs obtained from wild-type mice. In contrast, exogenous sCLU treatment significantly inhibited OC formation in both BMMs and OC precursor cultures. The inhibitory effect of sCLU was more prominent in BMMs than OC precursor cultures. Interestingly, treating BMMs with sCLU decreased the proliferative effects elicited by M-CSF and suppressed M-CSF-induced ERK activation of OC precursor cells without causing apoptotic cell death. This study provides the first evidence that sCLU reduces OC formation by inhibiting the actions of M-CSF, thereby suggesting its protective role in bone erosion.

60 APPLIED LIFE SCIENCES↗

Typological representation of the offshore oceanographic environment along the Alaskan North Slope

Erosion and flooding impacts to Arctic coastal environments are intensifying with nearshore oceanographic conditions acting as a key environmental driver. Robust and comprehensive assessment of the nearshore oceanographic conditions require knowledge of the following boundary conditions: incident wave energy, water level, incident wind energy, ocean temperature and salinity, bathymetry, and shoreline orientation. The number of offshore oceanographic boundary conditions can be large, requiring a significant computational investment to reproduce nearshore conditions. This present study develops location-independent typologies to reduce the number of boundary conditions needed to assess nearshore oceanographic environments in both a Historical (2007–2019) and Future (2020–2040) timespan along the Alaskan North Slope. We used WAVEWATCH III® and Delft3D Flexible Mesh model output from six oceanographic sites located along a constant ~50 m bathymetric line spanning the Chukchi to Beaufort Seas. K-means clustering was applied to the energy-weighted joint-probability distribution of significant wave height (H s ) and peak period (T p ). Distributions of wave and wind direction, wind speed, and water level associated with location-independent centroids were assigned single values to describe a reduced order, typological rendition of offshore oceanographic conditions. Reanalysis data (e.g., ASRv2, ERA5, and GOFS) grounded the historical simulations while projected conditions were obtained from downscaled GFDL-CM3 forced under RCP8.5 conditions. Location-dependence for each site is established through the occurrence joint-probability distribution in the form of unique scaling factors representing the fraction of time that the typology would occupy over a representative year. As anticipated, these typologies show increasingly energetic ocean conditions in the future. They also enable computationally efficient simulation of the nearshore oceanographic environment along the North Slope of Alaska for better characterization of coastal processes (e.g., erosion, flooding, or sediment transport).

54 ENVIRONMENTAL SCIENCES↗

Accuracy of hourly energy predictions for demand flexibility applications

Decarbonization goals in the United States electricity sector are increasing the levels of renewable energy generation in the electricity supply system, and are driving increased attention to building electrification, which will increase the magnitude and shift the timing of the electricity system peak. These changes are motivating new approaches to coordinate building electricity demand with low-carbon renewable generation, elevating the importance of demand flexibility (DF) in buildings and the need to quantify the temporal impacts of DF. In this paper, we first characterize the hourly predictive accuracy of six commonly used baseline models in an application context of quantifying building-level load shift. Our analysis revealed insights such as hours of the day (afternoons), periods of the week (weekends), and seasons (summer) that were predicted with more accuracy than other time periods. In addition, the analysis showed tendencies toward overprediction or underprediction of load. Secondly, we provide the first published investigation of baseline erosion from repeated dispatch of building load shifting. We observed that as the baseline period is pushed back further from the prediction day, the distribution of errors across baseline model predictions increases, with notable inflection points near the three-week erosion point for two of the three models.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Hurricanes and turbulent floods threaten arsenic-contaminated coastal soils and vulnerable communities

Coastal environments, particularly those adjacent to Superfund sites, are at increased risk of contaminant release during natural disasters, posing serious threats to nearby communities. To investigate this issue, we employed an advanced laboratory flood simulator to impose arsenic-contaminated sediments to turbulent flooding events. We further monitored changes in arsenic collocation and solid-phase speciation using advanced synchrotron radiation-based techniques to understand the impacts of flooding on arsenic mobility. Our results demonstrate that turbulent conditions significantly enhance the resuspension of arsenic-rich sediments, resulting in increased arsenic release into the water. This mobilization is driven by the erosion of the reduced sediments and the redox-mediated transformation and dissolution of Fe and Mn (oxyhydr) oxides, which promote the release of As(III). We found that arsenic speciation on resuspended particles is closely tied to shear stress, with As(V) prevailing at low stress and the more toxic As(III) dominating at higher stress levels. In the post-erosion phase, solid-phase As(III) decreased while dissolved As(III) increased, indicating ongoing desorption. The persistence of multiple arsenic species on resuspended particles marks them as potential long-range transport vectors. Thus, the environmental impact of flooding and sediment resuspension extends beyond the event itself, raising longer-term concerns for arsenic mobility. Our comprehensive geospatial analysis revealed substantial overlap between arsenic-contaminated soils and regions at high risk of flooding and hurricanes across the conterminous United States. This overlap disproportionately impacts economically disadvantaged and marginalized communities. Approximately 40 million Americans reside within 10 kilometers of these high-risk contaminated zones, with nearly 28 million exposed to hurricane threats and around 18 million vulnerable to flooding risks. Alarmingly, over 40% of those affected by hurricanes and 33% of those impacted by flooding belong to underrepresented minority and low-income populations. These findings highlight the urgent need for targeted mitigation strategies to protect public health and address environmental justice concerns.

54 ENVIRONMENTAL SCIENCES↗

Relationships between physical–geographical factors and soil degradation on agricultural land

Highlights: • Connection of soil degradation to seven physical-geographical variables was revealed. • New method of threshold data analysis was proposed. • Precise treshold values where soil degradation starts and ends were revealed. • Study area covered the entire area of Czech agricultural land – 13027 cadastres (78,866 km{sup 2}). It is a well-known fact that soil degradation is dramatically increasing and currently threatens agricultural soils all around the world. The objective of this study was to reveal the possible connection between soil degradation and seven physical-geographical factors - slope steepness, altitude, elevation differences, rainfall, temperature, soil texture and solar radiation – in the form of threshold values (if these exist), where soil degradation begins and ends. The analysis involved the whole area of the Czech Republic which consists of 13,027 cadasters (78,866 km{sup 2}). The greatest total degradation threat occurs in areas with slope steepness >7 degrees, average annual temperature 10.54, altitude >766 m a.s.l. Similarly, the results for water erosion, wind erosion, soil compaction, loss of organic matter, acidification and heavy metal contamination were processed. The results enable us to identify the relationships of different levels of threats which could consequently be used in various ways – for classification of threatened areas, for more effective implementation of anti-degradation measures, or purely for a better understanding of the role of physical geographical factors in soil degradation in the Czech Republic, and thus could increase the chances of reducing vulnerability to land degradation not only in the Czech Republic.

54 ENVIRONMENTAL SCIENCES↗

Measuring multiple cosmogenic nuclides in glacial cobbles sheds light on Greenland Ice Sheet processes

The behavior of the Greenland Ice Sheet during the Pleistocene remains uncertain due to the paucity of evidence predating the Last Glacial Maximum. In this study, we employ a novel approach, cosmogenic nuclide analysis of individual subglacially-derived cobbles, which allows us to make inferences about ice sheet processes and subglacial erosion. From three locations in western Greenland, we collected 86 cobbles from the current ice sheet margin and nine cobbles exposed on the modern proglacial land surface. We measured the concentration of in situ 10 Be in all cobbles (n = 95) and 26 Al and 14 C in a subset (n = 14). Cobbles deposited during Holocene retreat have 10 Be exposure ages generally consistent with the timing of ice retreat determined by other methods. Conversely, most of the 86 subglacial cobbles contain very low concentrations of 10 Be (median 1.0×10 3 atoms g –1 ), although several have ~10 4 and one has ~10 5 atoms g –1 . The low concentrations of 10 Be in most subglacial cobbles imply that their source areas under the Greenland Ice Sheet are deeply eroded, preserving minimal evidence of surface or near-surface exposure. The presence of measurable 14 C in ten of the cobbles requires that they experienced cosmogenic nuclide production within the past ~30 ka; however, 14 C/ 10 Be ratios of ~6 suggest that nuclide production occurred during shielding by overlying material. Only two of the 86 subglacial cobbles definitively have cosmogenic nuclide concentrations consistent with prior surface exposure. Overall, isotopic analysis of subglacial cobbles indicates that much of western Greenland's subglacial landscape is characterized by deep erosion and minimal subaerial exposure.

58 GEOSCIENCES↗

Dating fractures using luminescence

Rock fracturing (cracking) is a universal process that drives and limits chemical degradation, sediment production and erosion, and deterioration of infrastructure. Despite extensive research gains in rock mechanics on one hand and geochronology on the other, there remains a glaring gap in our ability to understand the long term evolution of natural, in situ fractures. Here we develop a novel fracture exposure dating technique, grounded in modern advances in luminescence geochronology. We apply our new dating method to a granitic boulder from a glacial outwash terrace in California, US. We conclude that the longest, clast-splitting E-W fracture appeared shortly after the boulder's deposit, whereas the secondary N-S fracture appeared 5 ka after the deposition, approximately correlating with the Last Glacial Maximum and Younger Dryas periods of the region, respectively. However, dating of the third fracture (<< 50 µm width) which does not fully split the rock, is ambiguous due to negligible daylight penetration and poor determination of fracture width. The fracture dating method presented herein brings with it the potential to decipher relationships that are crucial for the interpretation and modeling of, for example, long-term landscape and atmospheric evolution relating rock weathering to climate change and erosion.

58 GEOSCIENCES↗

A two-stage optical fusion framework for wildfire severity mapping across the conterminous United States

Accurate wildfire severity mapping (WSM) is essential for post-fire recovery planning, erosion risk assessment, ecosystem monitoring, and disaster risk reduction. Although Landsat and Sentinel optical imagery have been widely used for burn severity assessment, the added value of fusing multiple optical sensors has not been sufficiently quantified across diverse fire events, particularly since the launch of Landsat-9. This study evaluates whether multisensor optical fusion improves wildfire severity mapping relative to single-sensor baselines using Sentinel-2, Landsat-8, and Landsat-9 imagery across 40 wildfire events in the conterminous United States. We tested a two-stage fusion framework that combines feature-level fusion with pixel-level dimensionality reduction. First, feature-level fused datasets were created through early fusion by combining standardized post-fire bands from each sensor into a single predictor stack. Both raw reflectance bands and pairwise spectral transforms were retained to capture within- and cross-sensor spectral interactions. Second, Linear Discriminant Analysis was applied to both single-sensor and fused datasets to produce comparable low-dimensional feature spaces. Six machine-learning classifiers were then used to benchmark model performance with repeated spatially buffered train–test splits. Results show that Landsat-9 was the strongest single-sensor baseline. Among the fusion strategies, Sentinel-2 + Landsat-9 produced the most consistent improvement and reduced performance variability. Landscape-condition analysis further showed that this fusion was most beneficial in shrubland-dominated and high-terrain fires, where it achieved the highest overall mean accuracy and the fewest failures. In contrast, its benefits were less reliable in evergreen forests, mixed vegetation, and low- to moderate-elevation terrain. In operational settings, the Sentinel-2 + Landsat-9 configuration offers a practical solution for post-fire recovery planning, erosion-risk assessment, watershed management, and ecological monitoring when field observations are available and timely satellite-based information is needed.

Landsat↗

Investigations of effect of phase change mass transfer rate on cavitation process with homogeneous relaxation model

The super high fuel injection pressure and micro size of nozzle orifice has been an important development trend for the fuel injection system. Accordingly, cavitation transient process, fuel compressibility, amount of noncondensable gas in the fuel and cavitation erosion have attracted more attention. Based on the fact of cavitation in itself is a kind of thermodynamic phase change process, this paper takes the perspective of the cavitation phase change mass transfer process to analyze above mentioned phenomenon. The two-phase cavitating turbulent flow simulations with VOF approach coupled with HRM cavitation model and U-RANS of standard k-ε turbulence model were performed for investigations of cavitation phase change mass transfer process. It is concluded the mass transfer time scale coefficient in the Homogenous Relaxation Model (HRM) representing mass transfer rate should tend to be as small as possible in a condition that ensured the solver stable. At very fast mass transfer rate, the phase change occurs at very thin interface between liquid and vapor phase and condensation occurs more focused and then will contribute predictably to a more serious cavitation erosion. Both the initial non-condensable gas in fuel and the fuel compressibility can accelerate the cavitation mass transfer process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Effect of Radiation Timing on Patients With High-Risk Features of Parameningeal Rhabdomyosarcoma: An Analysis of IRS-IV and D9803

Purpose: Radiation therapy remains an essential treatment for patients with parameningeal rhabdomyosarcoma (PMRMS), and early radiation therapy may improve local control for patients with intracranial extension (ICE). Methods and Materials: To address the role of radiation therapy timing in PMRMS in the current era, we reviewed the outcome from 2 recent clinical trials for intermediate-risk RMS: Intergroup Rhabdomyosarcoma Study (IRS)-IV and Children's Oncology Group (COG) D9803. The PMRMS patients on IRS-IV with any high-risk features (cranial nerve palsy [CNP], cranial base bony erosion [CBBE], or ICE) were treated immediately at day 0, and PMRMS patients without any of these 3 features received week 6-9 radiation therapy. The D9803 PMRMS patients with ICE received day 0 X-Ray Therapy (XRT) as well; however, those with either CNP or CBBE had XRT at week 12. Results: Compared with the 198 PMRMS patients from IRS-IV, the 192 PMRMS patients from D9803 had no difference (P<.05) in 5-year local failure (19% vs 19%), failure-free-survival (70% vs 67%), or overall survival (75% vs 73%) in aggregate. The 5-year local failure rates by subset did not differ when patients were classified as having no risk features (None, 15% vs 19%, P=.25), cranial nerve palsy/cranial base of skull erosion (CNP/CBBE, 15% vs 28%, P=.22), or intracranial extension (ICE, 21% vs 15%, P=.27). The D9083 patients were more likely to have received initial staging by magnetic resonance imaging (71% vs 53%). Conclusions: These data support that a delay in radiation therapy for high-risk PMRMS features of CNP/CBBE does not compromise clinical outcomes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Atomistic simulations of deuterium irradiation on iron-based alloys in future fusion reactors

Iron-based alloys are now being considered as plasma-facing materials for the first wall of future fusion reactors. Therefore, the iron (Fe) and carbon (C) erosion will play a key role in predicting the life-time and viability of reactors with steel walls. In this work, the surface erosion and morphology changes due to deuterium (D) irradiation in pure Fe, Fe with 1% C impurity and the cementite, are studied using molecular dynamics (MD) simulations, varying surface temperature and impact energy. The sputtering yields for both Fe and C were found to increase with incoming energy. In iron carbide, C sputtering was preferential to Fe and the deuterium was mainly trapped as D 2 in bubbles, while mostly atomic D was present in Fe and Fe–1%C. The sputtering yields obtained from MD were compared to SDTrimSP yields. At lower impact energies, the sputtering mechanism was of both physical and chemical origin, while at higher energies (>100 eV) the physical sputtering dominated.

36 MATERIALS SCIENCE↗

Plasma exposures of a high-conductivity graphitic foam for plasma facing components

The plasma-surface interactions from samples of high-conductivity graphitic foam biased to 120 V and placed in 6–8 eV deuterium plasmas with densities as high as 10 19 m -3 were investigated at the PSI-2 linear plasma device in Jülich. Graphitic foam-plasma interactions were also studied at the Wendelstein 7-X (W7-X) stellarator in Greifswald by exposure to hydrogen and helium plasmas using the Jülich multi-purpose manipulator. The purpose was to explore the possibility of using the material in a plasma facing component, and initial results were encouraging. In W7-X, no measurable erosion or cracking was observed. The PSI-2 samples received a deuterium fluence of 5 × 10 25 m -2 resulting in an average erosion of 43 µm or about 5 mg per sample. Residual gas analysis (RGA) data were acquired to monitor sample outgassing. Laser-induced Breakdown Spectroscopy (LIBS) was used to measure deuterium retention in the porous foam. After exposure, the surfaces were characterized with scanning electron microscopy, energy dispersive x-ray analysis and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The graphitic foam has a thermal conductivity as high as 287 W/mK and is considered as a replacement to more exotic carbon fiber composites such as SepCarb NB31 or isotropic graphites like ATJ that are no longer produced but used in present-day tokamak experiments. Actively cooled monoblocks were made from the foam and underwent extensive materials characterization including infrared response studies at Oak Ridge National Laboratory. This material is under consideration for the proposed actively-cooled W7-X divertor scraper element.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Integrated modelling: Coupling of surface evolution and plasma-impurity transport

During the interaction of the scrape off layer (SOL) plasma with the first wall the evolution of both wall and plasma are tightly coupled: The erosion of the first wall leads to an impurity concentration in the plasma which affects the particle and power balance in the plasma. In turn the impurities, when leaving the plasma via transport, can form deposits and mixed materials, far away from their initial source location. These deposits can be eroded, allowing the impurities to stepwise migrate through the fusion device until they end up at a location where the plasma at the wall is cold enough and no further erosion occurs. To describe these processes an integrated model of surface evolution and plasma transport of impurities is needed. The WallDYN code achieves this required coupling of processes by parameterising the output of surface evolution- and plasma impurity-migration-codes by analytical models. For a given fixed background plasma it evolves the surface composition, derives impurity flux into and from the plasma and can from this derive the impurity densities in the plasma. This paper will show the importance of including this recycling of impurities at the wall in impurity migration modelling: The 13 CH 4 seeding experiment performed in the Wendelstein 7-X Stellerator is modelled using the recent extension of the WallDYN code to 3D plasma and wall geometries. A comparison with post mortem analysis of the 13 C deposition shows both qualitative and quantitative agreement with the WallDYN calculations.

36 MATERIALS SCIENCE↗

Chronostratigraphy of talus flatirons and piedmont alluvium along the Book Cliffs, Utah – Testing models of dryland escarpment evolution

Research on the evolution of dryland escarpments and what drives and controls their erosional retreat have been limited by a lack of chronologically constrained records. Prior investigations of escarpments in the southwestern U.S. and globally garner two endmember conceptual models -- one focused on bottom-up baselevel drivers and autogenic variations in piedmont and toeslope erosion processes, the other focused on the role of climate as a top-down forcing mechanism on sediment production and transport from cliffs. In this work, we test these conceptual models along a section of the Book Cliffs in central Utah, where climate has varied strongly and baselevel has fallen significantly over the late Quaternary. Four generations of talus flatirons and piedmont terraces are preserved in the study area we date them by optically stimulated luminescence and 10Be-exposure techniques. OSL depositional ages cluster into four generations of deposits with mean ages and mean standard errors of 117.8 ± 6.7 ka, 83.4 ± 3.3 ka, 52.4 ± 1.8 ka, and 5.6 ± 0.3 ka. 10Be-exposure results from talus boulders protruding from flatirons confirm that the youngest generation of talus is Holocene, with recent rock-fall boulders still being received on the landform top. Older flatiron generations produce incoherent, minimum exposure ages reflecting an increasing dominance of in situ boulder weathering and a steady-state denudation rate of ~45 mm/ky after tens of thousands of years. Based on the chronostratgraphy and correlation of talus and piedmont deposits, we interpret climate as the primary control on escarpment evolution. Depositional ages do not correspond to glacial epochs as historically presumed, but instead to episodes of intermediate and unstable or variable Pleistocene climate during Marine Isotope Stage-3 and 5 a/b. Results support the significance of high climate variability at millennial timescales in driving both sediment production by mass wasting from the cliff as well as sediment storage and reworking along the piedmont. In contrast, wetter climates of glacial epochs apparently caused greater erosion and sediment transport to trunk drainages. Our chronology also reveals a systematic decrease in deposit age with increasing distance up the piedmont from the regional baselevel of the Price River, consistent with transient fluvial incision and terrace abandonment. The Book Cliffs record notably does not correlate with similarly constrained records in Spain or the contrasting record from the Negev, yet they all share the feature of enhanced talus deposition and cliff retreat corresponding to climate instability rather than in response to steady glacial-climate conditions. Thus, we outline a model of escarpment evolution and retreat governed largely by top-down climate-forcing of sediment production and transport during climate variability, with local changes in baselevel and erosional processes on the piedmont being a modifying, secondary factor.

58 GEOSCIENCES↗

The Kalahari sediments and hominins in southern Africa

In this study, the temporal coupling of the structural evolution of the Kalahari Basin and the accumulation of the Kalahari Group sediments has been an accepted paradigm leading to the assumption that the Kalahari group sediments have been accumulating gradually since the mid-Cretaceous. Here we review the first actual ages for the Kalahari Group based on cosmogenic ages from six geological localities. These results demonstrate that Kalahari Basin infill was a more dynamic process than previously thought and that the Kalahari Group sediments are mostly Plio-Pleistocene in age (~4 Ma to 1–2 Ma). The hiatus between the initial structural subsidence of the basin, during the Cretaceous, and the general young age of the investigated sediments, implies a dynamic landscape in which significant phases of erosion occurred during the Mesozoic and Cenozoic. The magnitude of erosion is manifested by the fact that in many locations Kalahari Neogene to Quaternary sediments overlie Precambrian basement. The age of the present infill of the Kalahari thus falls within the temporal range of the genus Homo. In light of this new understanding, we provide a review of the archaeological evidence from the Kalahari Basin and along its southern fringe. Initial hominin presence is found at Wonderwerk Cave during the Olduvai Event and there is subsequent high-density occupation along the southern fringe of the Kalahari Basin during the Acheulean and the Fauresmith. Middle Stone Age occupation is limited to localities of limited size and small artifact counts and it appears that the focus of human occupation, particularly in the later stages of the Middle Stone Age, shifts southward, including along the coastal regions.

58 GEOSCIENCES↗

Nickel and iron partitioning between clay minerals, Fe-oxides and Fe-sulfides in lagoon sediments from New Caledonia

In the tropics, continental weathering and erosion are major sources of trace metals towards estuaries and lagoons, where early diagenesis of sediments may influence their mobility and bioavailability. Determining trace metals speciation in tropical sedimentary settings is thus needed to assess their long-term fate and potential threat to fragile coastal ecosystems. In this study, we determined Fe, Ni and S speciation across a shore-to-reef gradient in sediments from the New Caledonia lagoon that receive mixed contribution from lateritic (iron-oxyhydroxides and clay minerals), volcano-sedimentary (silicates) and marine (carbonate) sources. Sulfur K-edge XANES data indicated a major contribution of pyrite (FeS 2 ) to S speciation close to the shore. However, this contribution was found to dramatically decrease across the shore-to-reef gradient, S mainly occurring as sulfate close to the coral reef. In contrast, Fe and Ni K-edge XANES and EXAFS data indicated a minor contribution of pyrite to Fe and Ni speciation, and this contribution could be evidenced only close to the shore. The major fractions of Fe and Ni across the shore-to-reef gradient were found to occur as Ni- and Fe-bearing clay minerals consisting of smectite (~nontronite), glauconite and two types of serpentines (chrysotile and greenalite/berthierine). Among these clay minerals, greenalite/berthierine, glauconite and possibly smectite, were considered as authigenic. The low contribution of pyrite to trace metals speciation compared to clay minerals is interpreted as a result of (1) a reduced formation rate due to the low amounts of organic carbon compared to the Fe pool and (2) repeated re-oxidation events upon re-suspension of the sediments top layers due to the specific context of shallow lagoon waters. This study thus suggests that green clay authigenesis could represent a key process in the biogeochemical cycling of trace metals that are delivered to lagoon ecosystems upon continental erosion and weathering.

54 ENVIRONMENTAL SCIENCES↗