Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Doppler”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Using Spectral Edge To Measure Doppler Shift

New pulsed-laser ranging systems implement spectral-edge technique making high-resolution measurements of Doppler frequency shift in signals backscattered from targets. Pulsed laser emits at ultraviolet, visible, or infrared wavelength suitable for generation of desired target. Optical filter ("edge" filter) has sharp spectral transmission function such that middle frequency of laser emission lies on steep portion of slope ("edge") on one side of peak. Frequency inferred from relative amplitudes of signal with and without filtering. Intended for use in measuring velocities of solid and diffuse moving targets like wind, clouds, aerosols, or rain. Applications include measurements of wind shear from airports and aircraft.

Korb, Lawrence↗

Comparison of 2 micron Ho and 10 micron CO2 lidar for atmospheric backscatter and Doppler windshear detection

The development of eye-safe, solid-state Lidar systems is discussed, with an emphasis on Coherent Doppler Lidar for Atmospheric Wind Measurements. The following subject areas are covered: tunable Ho DIAL (Differential Absorption Lidar)/lidar atmospheric measurements; atmospheric turbulence measurements and detector arrays; diurnal measurements of C(sub n)(sup 2) for KSC lidar measurements; and development of single-frequency Ho laser/lidar.

Killinger, Dennis↗

An evaluation of preliminary Doppler global velocimetry measurements

A review of Doppler Global Velocimetry (DGV) data obtained during wind tunnel tests on a 75 degree swept delta wing was performed. High frequency variations observed in normalized data files are attributed to image alignment problems. Unfortunately, initial DGV velocity data compared poorly with baseline reference data. Nonlinear DGV system operation during the tests is the likely source of this problem. Corrected data compares much more favorably and suggests that DGV is a valid measurement technique. Future DGV investigations should include a method or means for monitoring laser frequency relative to the ALF transfer function behavior.

Miller, L. Scott↗

WAMDII: The Wide Angle Michelson Doppler Imaging Interferometer

As part of an effort to learn more about the upper atmosphere and how it is linked to the weather experienced each day, NASA and NRCC are jointly sponsoring the Wide Angle Michelson Doppler Imaging Interferometer (WAMDII) Mission. WAMDII will measure atmospheric temperature and wind speed in the upper atmosphere. In addition to providing data on the upper atmosphere, the wind speed and temperature readings WAMDII takes will also be highly useful in developing and updating computer simulated models of the upper atmosphere. These models are used in the design and testing of equipment and software for Shuttles, satellites, and reentry vehicles. In making its wind speed and temperature measurements, WAMDII examines the Earth's airglow, a faint photochemical luminescence caused by the influx of solar ultraviolet energy into the upper atmosphere. During periods of high solar flare activity, the amount of this UV energy entering the upper atmosphere increases, and this increase may effect airglow emissions.

Source record↗

Orbit-determination performance of Doppler data for interplanetary cruise trajectories. Part 2: 8.4-GHz performance and data-weighting strategies

A consider error covariance analysis was performed in order to investigate the orbit-determination performance attainable using two-way (coherent) 8.4-GHz (X-band) Doppler data for two segments of the planned Mars Observer trajectory. The analysis includes the effects of the current level of calibration errors in tropospheric delay, ionospheric delay, and station locations, with particular emphasis placed on assessing the performance of several candidate elevation-dependent data-weighting functions. One weighting function was found that yields good performance for a variety of tracking geometries. This weighting function is simple and robust; it reduces the danger of error that might exist if an analyst had to select one of several different weighting functions that are highly sensitive to the exact choice of parameters and to the tracking geometry. Orbit-determination accuracy improvements that may be obtained through the use of calibration data derived from Global Positioning System (GPS) satellites also were investigated, and can be as much as a factor of three in some components of the spacecraft state vector. Assuming that both station-location errors and troposphere calibration errors are reduced simultaneously, the recommended data-weighting function need not be changed when GPS calibrations are incorporated in the orbit-determination process.

Ulvestad, J. S.↗

Identification of Critical Design Points for the EAP of a Space-based Doppler Lidar Wind Sounder

The feasibility of making tropospheric wind measurements with a space-based Doppler lidar was studied by a number of agencies over the past 10-15 years. Currently NASA has a plan to launch such an instrument, the Laser Atmospheric Wind Sounder (LAWS), within the next decade. The design of the LAWS continues to undergo a series of iterations common to most instruments targeted for a space platform. In general, the constraints of available platform power, weight allowance, and project funds continue to change. With these changes the performance and design specifications also must change.

Emmitt, G. D.↗

Extraction of Aerosol and Rayleigh Components from Doppler Lidar Return Signal

One of the most significant problems which limits the applicability of lidar systems for pressure and density profile measurements below 30 km altitude is the presence of atmospheric aerosols which contaminate the molecular or Rayleigh return signal. A new technique is described which allows for the separation of the return signal into aerosol and molecular scattered components. The technique was applied to data from the University of Michigan's High Resolution Doppler Lidar (HRDL).

Barnes, John E.↗

The e-Beam Sustained Laser Technology for Space-based Doppler Wind Lidar

An overview is presented of GEC Avionics activities relating to the Spaceborne Doppler Wind Lidar. In particular, the results of design studies into the use of an e-beam sustained CO2 laser for spaceborne applications, and experimental work on a test bed system are discussed.

Brown, M. J.↗

Wind Measurements from 15 to 50 Km with a Doppler Rayleigh Lidar

The possibility to measure the mean wind in the high stratosphere using a Doppler Rayleigh lidar was demonstrated in 1989, and the Observatory of Haute Province (44 deg N, 6 deg E). It was originally developed to cover the height range 25-60 km, a region where the radars cannot operate; therefore, the system was designed to cover altitudes where the signal is only due to the Rayleigh backscattering. The instrument is currently set up at the Center d'Essais des Landes (44 deg N, 1 deg W) where it operated during the Dynamic Adapted Network for the Atmosphere Campaign in 1990. As the contribution of the Mie scattering was very low during this period above southern France, we have obtained vertical wind profiles in the stratosphere down to 15 km. Since the eruption of the Pinatubo volcano in Jun. 1991, the contribution of Mie scattering has increased between 15 and 30 km and it was very difficult with the original system to obtain wind measurements below 30 km. We will show that by using the same method with slightly different characteristics of the system, it is possible to measure the wind in the presence of Mie scattering. The first experimental results are presented.

Garnier, A.↗

Low-level atmospheric flows studied by pulsed Doppler lidar

A pulsed Doppler radar gains a tremendous advantage in studying atmospheric flows when it has the ability to scan. The Wave Propagation Laboratory (WPL) has been operating a scanning, 10.59 micron CO2 system for over 10 years. Recently, the WPL lidar has been a featured instrument in several investigations of mesoscale wind fields in the lowest 3-4 km of the atmosphere. These include four experiments: a study of the initiation and growth of the sea breeze off the coast of California, a study of the snake column of a prescribed forest fire, a study of the nighttime flow over the complex terrain near Rocky Flats, Colorado as it affects the dispersion of atmospheric contaminants, and a study of the wind flow in the Grand Canyon. We have analyzed much data from these experiments, and we have found that the lidar provides new insight into the structure of these flows. Many of these studies took place in rugged or mountainous terrain, thus using one of the major benefits of the lidar: the narrow, 90 microrad beam of the lidar makes it an ideal instrument for studying flow close to topography.

Banta, Robert M.↗

A pulsed CO2 Doppler lidar for boundary layer monitoring

A monostatic, master oscillator power amplifier (MOPA), CO2 pulsed Doppler lidar was constructed and tested. The system is compact (120 x 60 cm), operates at high pulse repetition rates (greater than 1 kHz) and is intended for simultaneous Doppler/Differential Absorption Lidar (DIAL) monitoring of the planetary boundary layer. Details of the system design, hard target calibrations, and aerosol returns are presented.

Pearson, Guy N.↗

Spectrum Modal Analysis for the Detection of Low-Altitude Windshear with Airborne Doppler Radar

A major obstacle in the estimation of windspeed patterns associated with low-altitude windshear with an airborne pulsed Doppler radar system is the presence of strong levels of ground clutter which can strongly bias a windspeed estimate. Typical solutions attempt to remove the clutter energy from the return through clutter rejection filtering. Proposed is a method whereby both the weather and clutter modes present in a return spectrum can be identified to yield an unbiased estimate of the weather mode without the need for clutter rejection filtering. An attempt will be made to show that modeling through a second order extended Prony approach is sufficient for the identification of the weather mode. A pattern recognition approach to windspeed estimation from the identified modes is derived and applied to both simulated and actual flight data. Comparisons between windspeed estimates derived from modal analysis and the pulse-pair estimator are included as well as associated hazard factors. Also included is a computationally attractive method for estimating windspeeds directly from the coefficients of a second-order autoregressive model. Extensions and recommendations for further study are included.

Kunkel, Matthew W.↗

Flux estimation of the FIFE planetary boundary layer (PBL) with 10.6 micron Doppler lidar

A method is devised for calculating wind, momentum, and other flux parameters that characterize the planetary boundary layer (PBL) and thereby facilitate the calibration of spaceborne vs. in situ flux estimates. Single Doppler lidar data are used to estimate the variance of the mean wind and the covariance related to the vertically pointing fluxes of horizontal momentum. The skewness of the vertical velocity and the range of kinetic energy dissipation are also estimated, and the surface heat flux is determined by means of a statistical Navier-Stokes equation. The conclusion shows that the PBL structure combines both 'bottom-up' and 'top-down' processes suggesting that the relevant parameters for the atmospheric boundary layer be revised. The conclusions are of significant interest to the modeling techniques used in General Circulation Models as well as to flux estimation.

Gal-Chen, Tzvi↗

Fatigue damage in superalloys determined using Doppler broadening positron annihilation

Axial fatigue specimens of three superalloys, Inconel 718, Incoloy 903 and Haynes 188, were machined from solution-heat-treated material and artificially aged. They were subjected to cyclic loading for a selected number of cycles after which the S parameter was determined using Doppler broadening positron annihilation. Initially, the S parameter decreased, followed by a large increase and a subsequent decline leading to fracture. This has been interpreted as the removal of residual vacancies, the introduction of new defects by cyclic loading, and, finally, a clustering of the defects as microcracks which grow to cause failure.

Hoeckelman, Donald↗

Doppler global velocimeter measurements of the vortical flow above a thin delta wing

Doppler global velocimetry, currently under development by NASA for the measurement of off-surface flow fields, will allow quantification of complex, 3D flow fields at video-camera rates and accomplish the simultaneous measurement of an entire flow field structure within the given plane. In order to assess the performance capabilities of the technique, velocity measurements of the vortical flow field above a thin, 75-deg delta wing were conducted at NASA-Langley and compared with results obtained via three-component laser velocimeter. The achievement of performance goals is confirmed.

Usry, Jimmy W.↗

Performance of the Phase Doppler Particle Analyzer icing cloud droplet sizing probe in the NASA Lewis Icing Research Tunnel

The design, development, and testing of an icing cloud droplet sizing probe based upon the Phase Doppler Particle Analyzer (PDPA) are discussed. This probe is an in-situ laser interferometry based single particle measuring device capable of determining size distributions. The probe is designed for use in harsh environments such as icing tunnels and natural icing clouds. From the measured size distribution, Median Volume Diameter (MVD) and Liquid Water Content (LWC) may be determined. Both the theory of measurement and the mechanical aspects of the probe design and development are discussed. The MVD results from the probe are compared to an existing calibration based upon different instruments in a series of tests in the NASA Lewis Icing Research Tunnel. Agreement between the PDPA probe and the existing calibration is close for MVDs between 15 to 30 microns, but the PDPA results are considerably smaller for MVDs under 15 microns.

Rudoff, R. C.↗

Optimal nadir scan angle for a space-based Doppler lidar wind sounder

A Laser Atmospheric Wind Sounder computer simulation model was used to conduct a series of trades between scan angle and accuracy/coverage to determine the optimal scan angle for a space-based Doppler lidar wind sounder. Attention is given to vertical backscatter profiles, advanced signal processing, pulse length, shot density, and vertical velocity variance. The LOS speed uncertainty (m/s) projected into the horizontal plane as a function of the nadir scan angle for a single laser shot into the upper troposphere and lowest 1 km of the earth's atmosphere for expected backscatter values is shown.

Emmitt, George D.↗

Momentum and heat flux estimation in the planetary boundary layer (PBL) with a 10.6-micron Doppler lidar

The mean wind, its standard deviation, and the momentum fluxes in the PBL are estimated with a 10.6-micron Doppler lidar. Spectral analysis of the radial velocities was performed, from which, by examining the amplitude of the power spectrum at the inertial range, the kinetic energy dissipation was deduced. The statistical form of the Navier-Stokes equations was used to derive the surface heat flux as the residual balance between the vertical gradient of the third moment of the vertical velocity and the kinetic energy dissipation.

Gal-Chen, Tzvi↗