Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DRILLING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Swelling properties of montmorillonite and beidellite clay minerals from molecular simulation: Comparison of temperature interlayer cation, and charge location effects

In this study, the swelling properties of smectite clay minerals are relevant to many engineering applications including environmental remediation, repository design for nuclear waste disposal, borehole stability in drilling operations, and additives for numerous industrial processes and commercial products. We used molecular dynamics and grand canonical Monte Carlo simulations to study the effects of layer charge location, interlayer cation, and temperature on intracrystalline swelling of montmorillonite and beidellite clay minerals. For a beidellite model with layer charge exclusively in the tetrahedral sheet, strong ion–surface interactions shift the onset of the two-layer hydrate to higher water contents. In contrast, for a montmorillonite model with layer charge exclusively in the octahedral sheet, weaker ion–surface interactions result in the formation of fully hydrated ions (two-layer hydrate) at much lower water contents. Clay hydration enthalpies and interlayer atomic density profiles are consistent with the swelling results. Water adsorption isotherms from grand canonical Monte Carlo simulations are used to relate interlayer hydration states to relative humidity, in good agreement with experimental findings.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Electrostatic Gating of Ionic Conductance through Heterogeneous van der Waals Nanopores

Nanofluidic ionic transistors typically require gate voltages above 1 V and operate only at submillimolar ionic strengths, limiting their biocompatible applications. We demonstrate ionic transistors consisting of single sub-10 nm nanopores drilled in van der Waals (vdW) heterostructures with internal gate electrodes made of few-layer graphene. These devices deliver up to 10-fold current modulation at gate voltages as low as 0.3 V in 10 mM KCl, and ∼2-fold modulation at near-physiological 100 mM KCl. Baseline conductance with no gate shows surface-charge-dominated transport below 100 mM KCl, consistent with negatively charged hBN walls and ∼5 nm opening of the pores. The surface charge and the electrochemical asymmetry introduced by the three-electrode configuration govern the device’s behavior: negative gate voltage (V G ) enriches ionic concentrations and enhances current, whereas positive V G induces a local depletion zone that suppresses transport. The current modulation by V G is dependent on the polarity of the transmembrane potential and leads to ion current rectification. Molecular dynamics simulations of a nanopore in a hBN–graphene–hBN stack reveal confinement and surface charge-dependent suppression of the relative permittivity of interfacial water. Continuum modeling with radially varying interfacial water permittivity reproduces the asymmetric I–V characteristics and explains how the embedded gate sculpts local potential and ion concentrations. By enabling sub-0.5 V control of ionic transport at up to 100 mM salt concentrations, these devices address a key need in nanofluidics to create low-power ionic circuits and biosensing.

Materials science↗
DOE OSTI2018

Predicting Effective Diffusion Coefficients in Mudrocks Using a Fractal Model and Small-Angle Neutron Scattering Measurements

The determination of effective diffusion coefficients of gases or solutes in the water–saturated pore space of mudrocks is time consuming and technically challenging. Yet, reliable values of effective diffusion coefficients are important to predict migration of hydrocarbon gases in unconventional reservoirs, dissipation of (explosive) gases through clay barriers in radioactive waste repositories, mineral alteration of seals to geological CO 2 storage reservoirs and contaminant migration through aquitards. In this study, small angle and very small angle neutron scattering techniques have been utilized to determine a range of transport properties in mudrocks, including porosity, pore size distributions and surface and volume fractal dimensions of pores and grains, from which diffusive transport parameters can be estimated. Using a fractal model derived from Archie's Law, we calculate effective diffusion coefficients from these parameters and compare them to laboratory–derived effective diffusion coefficients for CO 2 , H 2 , CH 4 and HTO on either the same or related mudrock samples. The samples include Opalinus Shale from the underground laboratory in Mont Terri, Switzerland; Boom Clay from a core drilled in Mol, Belgium and a marine claystone cored in Utah, USA. The predicted values were compared to laboratory diffusion measurements. The measured and modeled diffusion coefficients show good agreement, differing generally by less than factor 5. Furthermore, neutron or X–ray scattering analysis is therefore proposed as a novel method for fast, accurate estimation of effective diffusion coefficients in mudrocks, together with simultaneous measurement of multiple transport parameters including porosity, pore size distributions and surface areas, important for (reactive) transport modelling.

58 GEOSCIENCES↗
DOE OSTI2019

Hydrate-filled Fracture Formation at Keathley Canyon 151, Gulf of Mexico, and Implications for Non-vent Sites

Near-vertical hydrate-filled fractures are found in subseafloor marine muds, at both advective methane vent sites and at sites without obvious methane and fluid advection (non-vent sites). At non-vent sites, the mechanisms that transport methane to the fractures and control how hydrate-filled fractures form are not well understood. However, these mechanisms are important to establish, as most of Earth's natural gas hydrate is likely bound in marine mud systems. In this work, we focus on understanding the origin of hydrate and how fracture form at non-vent sites by examining previously hydrate-bearing fractures in conventional cores taken from Keathley Canyon 151, U.S. northern Gulf of Mexico, drilled by the Gas Hydrate Joint Industry Project in 2005. We combine information from well logs, sediment cores, and science party results and add new X-ray computed tomography of archival sections and scanning electron microcopy of core samples to develop a conceptual model. We propose that locally generated microbial methane is transported via diffusion from small pores in marine mud into biomineralized burrows with larger pore size in a process called short-range migration. Hydrate forms in burrows once the methane diffuses into them and the dissolved methane concentration exceeds the solubility threshold. When hydrate fills a burrow, heave from additional hydrate growth places stress on the burrow edges, expands the fracture, and creates additional void space in which methane can diffuse and continue forming hydrate. Fractures slowly propagate in the direction of maximum principal stress.

58 GEOSCIENCES↗
DOE OSTI2020

Fracture Caging to Limit Induced Seismicity

Geothermal resources offer a stable low-carbon energy source. However, geothermal sites can collocate with the hypocenters of large-magnitude seismic events. Large seismic events pose a risk to public safety and are therefore a liability for efforts to develop geothermal resources. In this work, we propose “fracture caging” to limit induced seismic event magnitudes and present evidence from numerical model predictions, laboratory experiments, and field observations. Fracture caging involves drilling tactical production wells around a geothermal injection zone to contain fluids in fracture-dominated flow systems. Prior to our work, the effect of small wells on the growth of large fractures and on flow through fractures was subject to debate. Our work shows that production wells can impede fracture growth and contain high-pressure fluids in fracture-dominated rocks. This containment offers a mechanism to limit induced seismicity.

58 GEOSCIENCES↗
DOE OSTI2020

The Role of Premagmatic Rifting in Shaping a Volcanic Continental Margin: An Example From the Eastern North American Margin

Both magmatic and tectonic processes contribute to the formation of volcanic continental margins. Such margins are thought to undergo extension across a narrow zone of lithospheric thinning (~100 km). New observations based on existing and reprocessed data from the Eastern North American Margin contradict this hypothesis. With ~64,000 km of 2-D seismic data tied to 40 wells combined with published refraction, deep reflection, receiver function, and onshore drilling efforts, we quantified along-strike variations in the distribution of rift structures, magmatism, crustal thickness, and early post-rift sedimentation under the shelf of Baltimore Canyon Trough (BCT), Long Island Platform, and Georges Bank Basin (GBB). Results indicate that BCT is narrow (80–120 km) with a sharp basement hinge and few rift basins. The seaward dipping reflectors (SDR) there extend ~50 km seaward of the hinge line. In contrast, the GBB is wide (~200 km), has many syn-rift structures, and the SDR there extend ~200 km seaward of the hinge line. Early post-rift depocenters at the GBB coincide with thinner crust suggesting “uniform” thinning of the entire lithosphere. Models for the formation of volcanic margins do not explain the wide structure of the GBB. We argue that crustal thinning of the BCT was closely associated with late syn-rift magmatism, whereas the broad thinning of the GBB segment predated magmatism. Correlation of these variations to crustal terranes of different compositions suggests that the inherited rheology determined the premagmatic response of the lithosphere to extension.

58 GEOSCIENCES↗
DOE OSTI2020

Creation of a Mixed-Mode Fracture Network at Mesoscale Through Hydraulic Fracturing and Shear Stimulation

Enhanced Geothermal Systems could provide a substantial contribution to the global energy demand if their implementation could overcome inherent challenges. Examples are insufficient created permeability, early thermal breakthrough, and unacceptable induced seismicity. In this study we report on the seismic response of a mesoscale hydraulic fracturing experiment performed at 1.5-km depth at the Sanford Underground Research Facility. We have measured the seismic activity by utilizing a 100-kHz, continuous seismic monitoring system deployed in six 60-m length monitoring boreholes surrounding the experimental domain in 3-D. The achieved location uncertainty was on the order of 1 m and limited by the signal-to-noise ratio of detected events. These uncertainties were corroborated by detections of fracture intersections at the monitoring boreholes. Three intervals of the dedicated injection borehole were hydraulically stimulated by water injection at pressures up to 33 MPa and flow rates up to 5 L/min. We located 1,933 seismic events during several injection periods. The recorded seismicity delineates a complex fracture network comprised of multistrand hydraulic fractures and shear-reactivated, preexisting planes of weakness that grew unilaterally from the point of initiation. We find that heterogeneity of stress dictates the seismic outcome of hydraulic stimulations, even when relying on theoretically well-behaved hydraulic fractures. Once hydraulic fractures intersected boreholes, the boreholes acted as a pressure relief and fracture propagation ceased. In order to create an efficient subsurface heat exchanger, production boreholes should not be drilled before the end of hydraulic stimulations.

58 GEOSCIENCES↗
DOE OSTI2021

The Relationship Between Topography, Bedrock Weathering, and Water Storage Across a Sequence of Ridges and Valleys

Abstract Bedrock weathering regulates nutrient mobilization, water storage, and soil production. Relative to the mobile soil layer, little is known about the relationship between topography and bedrock weathering. Here, we identify a common pattern of weathering and water storage across a sequence of three ridges and valleys in the sedimentary Great Valley Sequence in Northern California that share a tectonic and climate history. Deep drilling, downhole logging, and characterization of chemistry and porosity reveal two weathering fronts. The shallower front is ∼7 m deep at the ridge of all three hillslopes, and marks the extent of pervasive fracturing and oxidation of pyrite and organic carbon. A deeper weathering front marks the extent of open fractures and discoloration. This front is 11 m deep under two ridges of similar ridge‐valley spacing, but 17.5 m deep under a ridge with nearly twice the ridge‐valley spacing. Hence, at ridge tops, the fraction of the hillslope relief that is weathered scales with hillslope length. In all three hillslopes, below this second weathering front, closed fractures and unweathered bedrock extend about one‐half the hilltop elevation above the adjacent channels. Neutron probe surveys reveal that seasonally dynamic moisture is stored to approximately the same depth as the shallow weathering front. Under the channels that bound our study hillslopes, the two weathering fronts coincide and occur within centimeters of the ground surface. Our findings provide evidence for feedbacks between erosion and weathering in mountainous landscapes that result in systematic subsurface structuring and water routing.

58 GEOSCIENCES↗
DOE OSTI2021

Direct Observation of the Depth of Active Groundwater Circulation in an Alpine Watershed

Abstract The depth of active groundwater circulation is a fundamental control on stream flows and chemistry in mountain watersheds, yet it remains challenging to characterize and is rarely well constrained. We collected hydraulic conductivity, hydraulic head, temperature, chemical, noble gas, and 3 H/ 3 He groundwater age data from discrete levels in two boreholes 46 and 81 m deep in an alpine watershed, in combination with chemical and age data from shallow groundwater discharge, to discern groundwater flow rates at different depths and directly observe active and inactive groundwater. Vertical head gradients are steep (average of 0.4) and thermal profiles are consistent with typical linear conductive continental geotherms. Groundwater deeper than ∼20 m is distinct from shallow groundwater and creek water in its chemistry, noble gas signature, and age (dominantly >65 years compared to <9 years). Together these results suggest low vertical groundwater flow velocities and a relatively shallow active circulation depth of ∼20 m. This hypothesis is tested with a simple 2‐D numerical fluid flow and heat transport model representing a hillslope transect through the two boreholes. The modeling indicates that the subhorizontally bedded sedimentary rocks underlying the basin are highly anisotropic with low vertical hydraulic conductivity, and at most ∼10% of bedrock recharge (equivalent to <2% of stream baseflow) flows below a depth of 20 m. The study demonstrates the considerable value of discrete‐depth hydrogeologic, chemical, and age data for determining active circulation depth, and illustrates an approach for maximizing the utility of individual boreholes drilled for mountain bedrock aquifer characterization.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Shallow Aseismic Slip in the Delaware Basin Determined by Sentinel-1 InSAR

The Delaware Basin, Texas is currently a hot-spot of induced seismicity and ground deformation due to fluid extraction and injection associated with horizontal drilling techniques; however, the driving mechanism behind the seismicity and deformation remains under debate. Here, using vertical and east-west horizontal surface deformation measurements derived from Sentinel-1 interferometric synthetic aperture radar (InSAR), we show that the subsurface responds differently to oil and gas activity in the northern and southeastern portions of the basin. In the north, where there is little seismicity, deformation patterns display long-wavelengths and equidimensional patterns. In contrast, the southeast region hosts most of the seismicity and displays spatial deformation patterns with narrow linear features that strike parallel to the maximum principal horizontal stress and to trends in seismicity, suggesting movement along normal faults. We model a linear deformation feature using edge dislocations and show that the InSAR observations can be reproduced by slip on normal faults contained within the Delaware Mountain Group (DMG), the formation that hosts local wastewater injection and the majority of earthquakes. Our model consists of three parallel, high-angle normal faults, with two dipping toward one another in a graben structure. Slip magnitudes reach up to 25 cm and are spatially correlated with injection wells. Measured seismicity can only explain ~2% of the fault motion predicted by our fault model, suggesting that slip leading to the deformation is predominantly aseismic. We conclude that seismic and aseismic fault motion in the southeastern Delaware Basin is likely driven by wastewater injection near critically-stressed normal faults within the DMG.

58 GEOSCIENCES↗
DOE OSTI2022

Dust, Sand, and Winds Within an Active Martian Storm in Jezero Crater

Rovers and landers on Mars have experienced local, regional, and planetary-scale dust storms. However, in situ documentation of active lifting within storms has remained elusive. Over 5–11 January 2022 (L S 153°–156°), a dust storm passed over the Perseverance rover site. Peak visible optical depth was ~2, and visibility across the crater was briefly reduced. Pressure amplitudes and temperatures responded to the storm. Winds up to 20 m s -1 rotated around the site before the wind sensor was damaged. The rover imaged 21 dust-lifting events—gusts and dust devils—in one 25-min period, and at least three events mobilized sediment near the rover. Rover tracks and drill cuttings were extensively modified, and debris was moved onto the rover deck. Migration of small ripples was seen, but there was no large-scale change in undisturbed areas. This work presents an overview of observations and initial results from the study of the storm.

58 GEOSCIENCES↗
DOE OSTI2022

The Curiosity Rover's Exploration of Glen Torridon, Gale Crater, Mars: An Overview of the Campaign and Scientific Results

The Mars Science Laboratory rover, Curiosity, explored the clay mineral-bearing Glen Torridon region for 1 Martian year between January 2019 and January 2021, including a short campaign onto the Greenheugh pediment. The Glen Torridon campaign sought to characterize the geology of the area, seek evidence of habitable environments, and document the onset of a potentially global climatic transition during the Hesperian era. Curiosity roved 5 km in total throughout Glen Torridon, from the Vera Rubin ridge to the northern margin of the Greenheugh pediment. Curiosity acquired samples from 11 drill holes during this campaign and conducted the first Martian thermochemolytic-based organics detection experiment with the Sample Analysis at Mars instrument suite. The lowest elevations within Glen Torridon represent a continuation of lacustrine Murray formation deposits, but overlying widespread cross bedded sandstones indicate an interval of more energetic fluvial environments and prompted the definition of a new stratigraphic formation in the Mount Sharp group called the Carolyn Shoemaker formation. Glen Torridon hosts abundant phyllosilicates yet remains compositionally and mineralogically comparable to the rest of the Mount Sharp group. Glen Torridon samples have a great diversity and abundance of sulfur-bearing organic molecules, which are consistent with the presence of ancient refractory organic matter. The Glen Torridon region experienced heterogeneous diagenesis, with the most striking alteration occurring just below the Siccar Point unconformity at the Greenheugh pediment. Results from the pediment campaign show that the capping sandstone formed within the Stimson Hesperian aeolian sand sea that experienced seasonal variations in wind direction.

58 GEOSCIENCES↗
DOE OSTI2025

Radiocarbon Fingerprinting Black Carbon Source History in the Himalayas

Abstract Black carbon (BC) is considered as an important contributor to the Himalayan glaciers melt in the past few decades. However, the long‐term source apportionment of BC remains unclear. Here we present the first radiocarbon ( 14 C)‐based annual variation of BC source apportionment in an ice core spanning the period of 1959–2012 drilled from the Southeastern Tibetan Plateau, a receptor site of South Asia outflow. We find fossil fuel combustion is a major contribution (73% ± 5%), yet the biomass burning fraction ( ƒ biomass ) has grown from 24% ± 4% to 30% ± 4% since 1990. Intriguingly, we further find the ƒ biomass demonstrating a robust correlation with South Asian wildfires linked to climate oscillations. Thus, for mitigating BC impacts on Himalayan glaciers, South Asia's transition from fossil fuels to clean energy is a more efficient and urgent strategy than reducing residential biomass burning.

Wang, Mo [State Key Laboratory of Tibetan Plateau ↗
DOE OSTI2026

A ModEx Framework for Watershed Subsurface Investigation With Limited Geophysical Data Using Machine Learning and Hydrologic Modeling

Abstract Subsurface heterogeneity influences watershed hydrology strongly but remains difficult to characterize at catchment scales with sparse and costly field data. Geophysical surveys such as electromagnetic induction (EMI) provide local spatial subsurface images yet scaling them to watershed scales and converting EMI‐derived resistivity into hydraulic properties remains a challenge. We present a Model–Experiment (ModEx) framework that integrates limited EMI data with machine learning (ML) and hydrologic modeling to improve process representation and guide field investigations. Sparse EMI surveys were scaled to the catchment scale using a Random Forest model, and the resulting resistivity fields were combined with nearby borehole constraints to parameterize a hydrologic model. The EMI‐informed hydrological simulations improved predictions of streamflow sustained by subsurface flow and shallow saturation patterns. By combining EMI data and ML with hydrologic modeling, the ModEx framework guides future subsurface surveys, providing a transferable and efficient strategy for data–model integration across diverse watersheds. Plain Language Summary Mapping the underground network of soil and rock that controls water is essential for predicting floods and droughts, but seeing underground is difficult and expensive. We cannot drill everywhere, so scientists use geophysical tools to scan broad areas. There are two key challenges: these geophysical scans are often sparse across the whole watershed, and the geophysical data is hard to translate into water‐related properties. We used artificial intelligence to solve these problems. We taught a computer to find patterns linking the limited geophysical data to the land surface properties. This allowed it to fill in the gaps and create a complete, useful subsurface map for the entire watershed. This new map improves hydrologic simulations, leading to more accurate predictions of water movement in the watershed. It also helps scientists build better models with less data and generates a priority map showing where to measure next, making future investigations more efficient. Key Points Limited EMI scaled with ML improves catchment‐scale subsurface parameterization for hydrologic models The framework integrates hydrologic modeling with limited geophysical data to support subsurface investigation design ModEx framework offers a transferable data–model integration strategy that quantifies and reduces uncertainty guiding watershed studies

Chen, Hang↗
DOE OSTI2015

Initiation of the Lusi mudflow disaster

The Lusi mudflow is a unique disaster. Mud suddenly erupted in an urban area in Java, Indonesia, in May 2006. Nine years of continuous eruption have displaced 39,700 people and cost over US$2.7 billion in damages and disaster management. Intense debate has focused on whether the eruption was naturally triggered by the Yogyakarta earthquake, which occurred two days prior to the eruption and 260 km away or was the result of gas drilling operations in the nearby Banjar Panji-1 (BJP-1) well. Here we use subsurface gas measurements from the well before and immediately after the Yogyakarta earthquake to demonstrate that an earthquake trigger is unlikely.

58 GEOSCIENCES↗
DOE OSTI2018

Response of Aquatic Bacterial Communities to Hydraulic Fracturing in Northwestern Pennsylvania: A Five-Year Study

Horizontal drilling and hydraulic fracturing extraction procedures have become increasingly present in Pennsylvania where the Marcellus Shale play is largely located. The potential for long-term environmental impacts to nearby headwater stream ecosystems and aquatic bacterial assemblages is still incompletely understood. Here, we perform high-throughput sequencing of the 16 S rRNA gene to characterize the bacterial community structure of water, sediment, and other environmental samples (n = 189) from 31 headwater stream sites exhibiting different histories of fracking activity in northwestern Pennsylvania over five years (2012–2016). Stream pH was identified as a main driver of bacterial changes within the streams and fracking activity acted as an environmental selector for certain members at lower taxonomic levels within stream sediment. Methanotrophic and methanogenic bacteria (i.e. Methylocystaceae, Beijerinckiaceae, and Methanobacterium ) were significantly enriched in sites exhibiting Marcellus shale activity (MSA+) compared to MSA- streams. This study highlighted potential sentinel taxa associated with nascent Marcellus shale activity and some of these taxa remained as stable biomarkers across this five-year study. Identifying the presence and functionality of specific microbial consortia within fracking-impacted streams will provide a clearer understanding of the natural microbial community’s response to fracking and inform in situ remediation strategies.

58 GEOSCIENCES↗
DOE OSTI2020

Daily Satellite Observations of Methane from Oil and Gas Production Regions in the United States

Production of oil and natural gas in North America is at an all-time high due to the development and use of horizontal drilling and hydraulic fracturing. Methane emissions associated with this industrial activity are a concern because of the contribution to climate radiative forcing. We present new measurements from the space-based TROPOspheric Monitoring Instrument (TROPOMI) launched in 2017 that show methane enhancements over production regions in the United States. In the Uintah Basin in Utah, TROPOMI methane columns correlated with in-situ measurements, and the highest columns were observed over the deepest parts of the basin, consistent with the accumulation of emissions underneath inversions. In the Permian Basin in Texas and New Mexico, methane columns showed maxima over regions with the highest natural gas production and were correlated with nitrogen-dioxide columns at a ratio that is consistent with results from in-situ airborne measurements. The improved detail provided by TROPOMI will likely enable the timely monitoring from space of methane emissions associated with oil and natural gas production.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Unsupervised learning-enabled pulsed infrared thermographic microscopy of subsurface defects in stainless steel

Metallic structures produced with laser powder bed fusion (LPBF) additive manufacturing method (AM) frequently contain microscopic porosity defects, with typical approximate size distribution from one to 100 microns. Presence of such defects could lead to premature failure of the structure. In principle, structural integrity assessment of LPBF metals can be accomplished with nondestructive evaluation (NDE). Pulsed infrared thermography (PIT) is a non-contact, one-sided NDE method that allows for imaging of internal defects in arbitrary size and shape metallic structures using heat transfer. PIT imaging is performed using compact instrumentation consisting of a flash lamp for deposition of a heat pulse, and a fast frame infrared (IR) camera for measuring surface temperature transients. However, limitations of imaging resolution with PIT include blurring due to heat diffusion, sensitivity limit of the IR camera. We demonstrate enhancement of PIT imaging capability with unsupervised learning (UL), which enables PIT microscopy of subsurface defects in high strength corrosion resistant stainless steel 316 alloy. PIT images were processed with UL spatial–temporal separation-based clustering segmentation (STSCS) algorithm, refined by morphology image processing methods to enhance visibility of defects. The STSCS algorithm starts with wavelet decomposition to spatially de-noise thermograms, followed by UL principal component analysis (PCA), fine-tuning optimization, and neural learning-based independent component analysis (ICA) algorithms to temporally compress de-noised thermograms. The compressed thermograms were further processed with UL-based graph thresholding K-means clustering algorithm for defects segmentation. The STSCS algorithm also includes online learning feature for efficient re-training of the model with new data. For this study, metallic specimens with calibrated microscopic flat bottom hole defects, with diameters in the range from 203 to 76 µm, were produced using electro discharge machining (EDM) drilling. While the raw thermograms do not show any material defects, using STSCS algorithm to process PIT images reveals defects as small as 101 µm in diameter. To the best of our knowledge, this is the smallest reported size of a sub-surface defect in a metal imaged with PIT, which demonstrates the PIT capability of detecting defects in the size range relevant to quality control requirements of LPBF-printed high-strength metals.

36 MATERIALS SCIENCE↗