Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Circuit simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

Maze solving automatons for self-healing of open interconnects: Modular add-on for circuit boards

We present the circuit board integration of a self-healing mechanism to repair open faults. The electric field driven mechanism physically restores fractured interconnects in electronic circuits and has the ability to solve mazes. The repair is performed by conductive particles dispersed in an insulating fluid. We demonstrate the integration of the healing module onto printed circuit boards and the ability of maze solving. We model and perform experiments on the influence of the geometry of conductive particles as well as the terminal impedances of the route on the healing efficiency. The typical heal rate is 10 μm/s with healed route having mean resistance of 8 kΩ across a 200 micron gap and depending on the materials and concentrations used.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Effects of temperature and pH on the electrochemical behaviour of alloy 600 in simulated pressurized water reactor primary water

The effects of temperature and pH on the electrochemical properties of Alloy 600 were studied in oxygenated borate buffer solutions by the measurements of open circuit potential (OCP), anodic potentiostatic polarization, Mott-Schottky analysis (MSA), and electrochemical impedance spectroscopy (EIS). At each temperature and pH, the stabilized anodic passive current density was independent of the formation potential, and the slope of the M - S plot for the passive film formed at +0.3 V OCP (OCP + 0.3 V) is positive, indicating that the passive films formed on Alloy 600 have n-type semiconductor character. With increasing temperature (in each solution), the OCP and the impedance modulus decreased, while the passive current density and the defect density calculated from MSA increased, indicating a significant reduction in corrosion resistance. With the increase in pH value, the passive current density decreased, the absolute value of impedance increased slightly, revealing a slight increase in corrosion resistance. According to the optimization of Mixed Potential Model (MPM) on the experimentally measured EIS data for Alloy 600 at OCP and +0.3 V OCP , a series of fundamental parameters related to the micro-characteristic of passive film were extracted. In the barrier layer of the passive film, the concentration of cation interstitials is much higher than that of anion vacancies, indicating that the former was a dominant defect. With increasing temperature, the linear increase in the defect density and film thickness resulted in a linear increase of the anodic current density. However, with increasing pH, the decrease of defect density and the slight increase of film thickness caused a linear reduction in anodic current density. Elevated temperature has a more significant deterioration effect on the corrosion resistance of Alloy 600 than the increased pH value. Additionally, all the kinetics parameters describing the generation of cation interstitials and oxygen vacancies at the substrate/film were obtained.

36 MATERIALS SCIENCE↗
NASA NTRS2005

Modeling of a Metal-Ferroelectric-Semiconductor Field-Effect Transistor NAND Gate

Considerable research has been performed by several organizations in the use of the Metal- Ferroelectric-Semiconductor Field-Effect Transistors (MFSFET) in memory circuits. However, research has been limited in expanding the use of the MFSFET to other electronic circuits. This research project investigates the modeling of a NAND gate constructed from MFSFETs. The NAND gate is one of the fundamental building blocks of digital electronic circuits. The first step in forming a NAND gate is to develop an inverter circuit. The inverter circuit was modeled similar to a standard CMOS inverter. A n-channel MFSFET with positive polarization was used for the n-channel transistor, and a n-channel MFSFET with negative polarization was used for the p-channel transistor. The MFSFETs were simulated by using a previously developed current model which utilized a partitioned ferroelectric layer. The inverter voltage transfer curve was obtained over a standard input of zero to five volts. Then a 2-input NAND gate was modeled similar to the inverter circuit. Voltage transfer curves were obtained for the NAND gate for various configurations of input voltages. The resultant data shows that it is feasible to construct a NAND gate with MFSFET transistors.

Phillips, Thomas A.↗
DOE OSTI2023

Simulation of Linear Non-Hermitian Boundary-Value Problems with Quantum Singular-Value Transformation

Herein we propose a quantum algorithm for simulating dissipative waves in inhomogeneous linear media as a boundary-value problem. Using the so-called quantum singular value transformation (QSVT), we construct a quantum circuit that models the propagation of electromagnetic waves in a one-dimensional system with outgoing boundary conditions. The corresponding measurement procedure is also discussed. Limitations of the QSVT algorithm are identified in connection with the large condition numbers that the dispersion matrices exhibit at weak dissipation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Chooz-A steam generators characterization - 15205

EDF nuclear waste management requires a deep understanding of characterization, classification and waste sorting operations. In fact, French nuclear waste management defines several classes with specific management, treatment and storage facilities. Based on particular criteria, the more the radiological risk of the nuclear waste is important, the more its management will be complex and expensive. During the dismantling of the first French pressurized reactor Chooz-A, decontamination of the primary water circuits (not including the reactor vessel), the steam generators and the pressurizer have been carried out in order to reduce their activity levels. Thanks to these decontamination operations, and a specific characterization methodology, EDF was able to de-classify the 4 steam generators and store them in one piece at the ANDRA Very Low Level Activity disposal facilities instead of the Low and Intermediate Level activity one. This de-classification allowed EDF to avoid important cutting and packaging processes. Therefore, significant dose reductions for the operators and financial gain have been made. To characterize and declare Chooz-A SG activity, EDF-CIDEN uses a methodology defined by the French institute of atomic energy, CEA. The method is based on external gamma spectrometry measurements performed with NaI collimated detectors, associated with MERCURAD simulations providing the transfer functions for the detectors and activity sources. Internal measurements are carried out with a CZT (CdZnTe) probe inside the SG tubes to refine the 3D model. In fact, the primary side represents the main source of activity, and understanding its contamination distribution is important to reduce the model and calculation uncertainties. Measurements eventually provide SG {sup 60}Co global activity, from which the activities of other radionuclides of the spectrum are determined using scaling factors. The final activity declaration takes into account the standard deviation of the measurements in order to cover the uncertainties of the methodology. Thereby, the declaration is 'slightly over-estimative', enough to meet the waste storage facility acceptance criteria. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2015

Modeling of electrodes and implantable pulse generator cases for the analysis of implant tip heating under MR imaging

Purpose: The authors’ purpose is to model the case of an implantable pulse generator (IPG) and the electrode of an active implantable medical device using lumped circuit elements in order to analyze their effect on radio frequency induced tissue heating problem during a magnetic resonance imaging (MRI) examination. Methods: In this study, IPG case and electrode are modeled with a voltage source and impedance. Values of these parameters are found using the modified transmission line method (MoTLiM) and the method of moments (MoM) simulations. Once the parameter values of an electrode/IPG case model are determined, they can be connected to any lead, and tip heating can be analyzed. To validate these models, both MoM simulations and MR experiments were used. The induced currents on the leads with the IPG case or electrode connections were solved using the proposed models and the MoTLiM. These results were compared with the MoM simulations. In addition, an electrode was connected to a lead via an inductor. The dissipated power on the electrode was calculated using the MoTLiM by changing the inductance and the results were compared with the specific absorption rate results that were obtained using MoM. Then, MRI experiments were conducted to test the IPG case and the electrode models. To test the IPG case, a bare lead was connected to the case and placed inside a uniform phantom. During a MRI scan, the temperature rise at the lead was measured by changing the lead length. The power at the lead tip for the same scenario was also calculated using the IPG case model and MoTLiM. Then, an electrode was connected to a lead via an inductor and placed inside a uniform phantom. During a MRI scan, the temperature rise at the electrode was measured by changing the inductance and compared with the dissipated power on the electrode resistance. Results: The induced currents on leads with the IPG case or electrode connection were solved for using the combination of the MoTLiM and the proposed lumped circuit models. These results were compared with those from the MoM simulations. The mean square error was less than 9%. During the MRI experiments, when the IPG case was introduced, the resonance lengths were calculated to have an error less than 13%. Also the change in tip temperature rise at resonance lengths was predicted with less than 4% error. For the electrode experiments, the value of the matching impedance was predicted with an error less than 1%. Conclusions: Electrical models for the IPG case and electrode are suggested, and the method is proposed to determine the parameter values. The concept of matching of the electrode to the lead is clarified using the defined electrode impedance and the lead Thevenin impedance. The effect of the IPG case and electrode on tip heating can be predicted using the proposed theory. With these models, understanding the tissue heating due to the implants becomes easier. Also, these models are beneficial for implant safety testers and designers. Using these models, worst case conditions can be determined and the corresponding implant test experiments can be planned.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2023

Optimizing the tuning range of the Fermilab Recycler 53MHz RF cavities by exploiting the avoided crossing of the tuner and cavity modes

The electromagnetic eigenmodes of the Fermilab Recycler RF cavities were simulated with ACE3P running on NERSC's 'Perlmutter' supercomputer in an attempt to optimize their tuning range to comfortably support slip-stacking. A theory, based on coupled circuits and avoided crossings, was developed to explain the origins of the tuning range for tuner-cavity waveguide systems. This provided a logical, rigorous method to carry out this optimization, although engineering problems due to high voltages in the tuner and the operational $\mu$ range of the garnet had to be carefully implemented. It was shown that the desired goal of 10kHz of tuning was not attainable with the current cavity specifications. The maximum tuning range obtained was 5.59kHz for a single tuner with a coaxial line of length 63in. A double tuner cavity was also studied using the simulation software, although with little improvement in the tuning range. A promising technique to improve the tuning range involving the desynchronization of the garnets' magnetic permeabilities is proposed.

43 PARTICLE ACCELERATORS↗
DOE OSTI2016

Design and dynamic modeling of a printed circuit heat exchanger for the next generation nuclear plant

Printed circuit heat exchangers (PCHEs) are promising to be adopted in the design of the Next Generation Nuclear Plant (NGNP). A PCHE serves as an intermediate heat exchanger (IHX) to isolate the secondary loop from the reactor's primary system. The overall plant thermal efficiency relies on the PCHE performance and the reactor safety could be affected by the PCHE performance. It is therefore imperative to be able to accurately model PCHE's performance under various conditions. The aim of this study is to design an IHX-type PCHE for a reference NGNP design and conduct both steady-state and transient simulations for the designed PCHE. A countercurrent configuration and straight-channel geometry were adopted for the PCHE design and the classic log-mean temperature difference (LMTD) method was utilized to size the PCHE for the required thermal duty. A mathematical model was numerically solved to predict the steady-state and transient behavior of the PCHE. The steady-state temperature distributions of the fluids on the hot and cold sides and in the solid plates of the heat exchanger were initially obtained by dividing the PCHE into 1,000 segments along the flow direction, and were served as the initial condition for the transient simulations. A series of transient scenarios, including inlet temperature step changes, mass flow rate step changes, and inlet temperature step changes combined with mass flow step changes, were simulated and analyzed to examine the dynamic performance of the designed PCHE. The numerical results appear reasonable and it is evident that the dynamic model has the capability of predicting both steady-state and transient performance of the straight-channel PCHE. In addition, the numerical results could provide some insights for developing control strategies for PCHEs as IHXs in the NGNP. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2019

HTS Transformer Windings Design Using Distributive Ratios for Minimization of Short Circuit Forces

High-temperature superconducting (HTS) transformers have a promising feature in reduction of total weight, total size, and the losses of large-scale distribution transformers. However, the lower leakage reactance of HTS transformers results in a higher short-circuit fault currents and electromagnetic forces. Therefore, optimization of short-circuit electromagnetic forces is one of the crucial aspects in the design of HTS transformers. In this paper, a novel analytical method is proposed for determination of optimum distributive ratios resulting in minimization of these forces for asymmetrical multi-segment windings of an HTS transformer. Employing these distributive ratios, radial and axial components of short-circuit electromagnetic forces in an HTS transformer are significantly reduced. Two- and three-dimensional (2D and 3D) finite element method (FEM) simulations are employed to verify the analytical method results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Research on the Corrosion Behavior of X70 Pipeline Steel Under Coupling Effect of AC + DC and Stress

The coupling effect of stray AC (alternating current) + DC (direct current) and tensile stress-induced X70 pipeline corrosion is complicated with its mechanism uncovered. In this work, the corrosion behavior of X70 pipeline steel under three different corrosion (including an individual AC corrosion, mixed AC + 150 MPa tensile stress corrosion, coupling effect of AC + a 30 A/m{sup 2} DC interference and 150 MPa tensile stress corrosion) conditions in Dagang soil simulated solution was investigated by COMSOL Multiphysics software simulation, electrochemical tests, scanning electron microscope and other techniques. The results indicated that with the increase in AC density, the open-circuit potential of the X70 steel samples was negatively shifted and corrosion rate increased in three different corrosion conditions. The corrosion rates of X70 steel samples under individual AC interference were almost unchanged when 150.9 MPa tensile stress was applied. When applying 30 A/m{sup 2} DC interference, the corrosion rate of X70 steel increases significantly. Therefore, the factors affecting corrosion performance of X70 pipeline steel were DC > AC > stress. Under individual AC interference, uniform corrosion occurred on the X70 steel at an AC current density of less than 30 A/m{sup 2}, while the pitting corrosion occurred at an AC current density of greater than 100 A/m{sup 2}. The application of tensile stress and DC had a certain inhibitory effect on pitting corrosion.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Functional integration of Ni–Mo electrocatalysts with Si microwire array photocathodes to simultaneously achieve high fill factors and light-limited photocurrent densities for solar-driven hydrogen evolution

An n + p-Si microwire array coupled with a two-layer catalyst film consisting of Ni–Mo nanopowder and TiO 2 light-scattering nanoparticles has been used to simultaneously achieve high fill factors and light-limited photocurrent densities from photocathodes that produce H 2 (g) directly from sunlight and water. The TiO 2 layer scattered light back into the Si microwire array, while optically obscuring the underlying Ni–Mo catalyst film. In turn, the Ni–Mo film had a mass loading sufficient to produce high catalytic activity, on a geometric area basis, for the hydrogen-evolution reaction. The best-performing microwire array devices prepared in this work exhibited short-circuit photocurrent densities of -14.3 mA cm -2 , photovoltages of 420 mV, and a fill factor of 0.48 under 1 Sun of simulated solar illumination, whereas the equivalent planar Ni–Mo-coated Si device, without TiO 2 scatterers, exhibited negligible photocurrent due to complete light blocking by the Ni–Mo catalyst layer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Modeling nitrogen plasmas produced by intense electron beams

A new gas–chemistry model is presented to treat the breakdown of a nitrogen gas with pressures on the order of 1 Torr from intense electron beams with current densities on the order of 10 kA/cm{sup 2} and pulse durations on the order of 100 ns. For these parameter regimes, the gas transitions from a weakly ionized molecular state to a strongly ionized atomic state on the time scale of the beam pulse. The model is coupled to a 0D–circuit model using the rigid–beam approximation that can be driven by specifying the time and spatial profiles of the beam pulse. Simulation results are in good agreement with experimental measurements of the line–integrated electron density from experiments done using the Gamble II generator at the Naval Research Laboratory. It is found that the species are mostly in the ground and metastable states during the atomic phase, but that ionization proceeds predominantly through thermal ionization of optically allowed states with excitation energies close to the ionization limit.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Hysteretic magnetoresistance in nanowire devices due to stray fields induced by micromagnets

Abstract We study hysteretic magnetoresistance in InSb nanowires due to stray magnetic fields from CoFe micromagnets. Devices without any ferromagnetic components show that the magnetoresistance of InSb nanowires commonly exhibits either a local maximum or local minimum at zero magnetic field. Switching of microstrip magnetizations then results in positive or negative hysteretic dependence as conductance maxima or minima shift with respect to the global external field. Stray fields are found to be in the range of tens of millitesla, comparable to the scale over which the nanowire magnetoresistance develops. We observe that the stray field signal is similar to that obtained in devices with ferromagnetic contacts (spin valves). We perform micromagnetic simulations which are in reasonable agreement with the experiment. The use of locally varying magnetic fields may bring new ideas for Majorana circuits in which nanowire networks require control over field orientation at the nanoscale.

Materials Science↗
DOE OSTI2026

Existence of a robust optimal control process for efficient measurements in a two-qubit system

The verification of quantum entanglement is essential for quality control in quantum communication. In this work we propose an efficient protocol to directly verify the two-qubit entanglement of a known target state through a single-expectation-value measurement. Our method provides exact entanglement quantification using the concurrence measure without performing quantum state tomography. We prove the existence of a unitary transformation that drives a known initial state of a two-qubit system to a designated final state, where the trace over a chosen observable directly yields the concurrence of the initial state. Furthermore, we implement an optimal control process of that transformation and demonstrate its effectiveness through numerical simulations. We also show that this process is robust to environmental noise. Our approach offers advantages in directly verifying entanglement with low circuit depth, making it suitable for industrial-scale quality control of entanglement generation. Our results presented here provide mathematical justification for our earlier computational experiments.

Rodriguez, Ricardo [McPherson Coll.] (ORCID:000000↗
DOE OSTI2021

Photon-Number-Dependent Hamiltonian Engineering for Cavities

Cavity resonators are promising resources for quantum technology, while native nonlinear interactions for cavities are typically too weak to provide the level of quantum control required to deliver complex targeted operations. Here we investigate a scheme to engineer a target Hamiltonian for photonic cavities using ancilla qubits. By off resonantly driving dispersively coupled ancilla qubits, we develop an optimized approach to engineering an arbitrary photon-number-dependent Hamiltonian for the cavities while minimizing the operation errors. Here, the engineered Hamiltonian admits various applications including canceling unwanted cavity self-Kerr interactions, creating higher-order nonlinearities for quantum simulations, and designing quantum gates resilient to noise. Our scheme can be implemented with coupled microwave cavities and transmon qubits in superconducting circuit systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Variational Adiabatic Gauge Transformation on Real Quantum Hardware for Effective Low-Energy Hamiltonians and Accurate Diagonalization

Effective low-energy theories represent powerful theoretical tools to reduce the complexity in modeling interacting quantum many-particle systems. However, common theoretical methods rely on perturbation theory, which limits their applicability to weak interactions. Here we introduce the Variational Adiabatic Gauge Transformation (VAGT), a nonperturbative hybrid quantum algorithm that can use nowadays quantum computers to learn the variational parameters of the unitary circuit that brings the Hamiltonian to either its block-diagonal or full-diagonal form. If a Hamiltonian can be diagonalized via a shallow quantum circuit, then VAGT can learn the optimal parameters using a polynomial number of runs. The accuracy of VAGT is tested through numerical simulations, as well as simulations on Rigetti and IonQ quantum computers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Impact of K-factor on Short Circuit Program Convergence for Inverter-Based Resources during Faults

Classical short-circuit programs that linearize the power network are no longer applicable for inverter based resources (IBRs), necessitating an iterative approach. Phasor domain programs can model the IBRs using an iterative approach considering nonlinear fault responses. In phasor domain models, the IBR can be modeled as a voltage controlled current source (VCCS) in tabular form with positive, negative, and zero sequence information for balanced and unbalance short-circuit faults. In the VCCS modeling of the IBR, positive and negative incremental reactive current, also known as the k-factor, plays an important role in short circuit program convergence. In this work, a few approaches: conventional VCCS modeling with a k-factor of 2, conventional VCCS modeling with a k-factor of 2 with modified pre-fault voltages, VCCS characteristics based on the power flow solution with a k-factor of 2, and VCCS characteristics based on the power flow solution with a k-factor of 1 are investigated for short circuit program convergence under higher IBR penetration. The IEEE 39 bus New England Test System is taken as the test system, and simulations are carried out in PSS®CAPE 15.0.26 simulation software. Simulation results demonstrate that IBR penetration is higher for the VCCS model, which corresponds to the power flow solution with k-factor 1, compared to other approaches.

42 ENGINEERING↗
DOE OSTI2017

Modeling Control Strategies and Range Impacts for Electric Vehicle Integrated Thermal Management Systems with MATLAB/Simulink

The National Renewable Energy Laboratory's (NREL's) CoolSim MATLAB/Simulink modeling framework was used to explore control strategies for an electric vehicle combined loop system. Three system variants of increased complexity and efficiency were explored: a glycol-based positive temperature coefficient heater (PTC), PTC with power electronics and electric motor (PEEM) waste heat recovery, and PTC with PEEM waste heat recovery plus heat pump versions. Additionally, the benefit of electric motor preheating was considered. A two-level control strategy was developed where the mode selection and component control were treated separately. Only the parameters typically available by vehicle sensors were used to control the system. The control approach included a mode selection algorithm and controllers for the compressor speed, cabin blower flow rate, coolant flow rate, and the front-end heat exchanger coolant bypass rate. The electric motor was bypassed by the cooling circuit until its temperature exceeded the coolant inlet temperature. The impact of these thermal systems on electric vehicle range during warmup was simulated for the Urban Dynamometer Driving Schedule (UDDS) and Highway Fuel Economy Test (HWFET2X) drive cycles weighted 45%/55% respectively. A range of ambient temperatures from -20 degrees C to +20 degrees C was considered. NREL's Future Automotive Systems Technology Simulator (FASTSim) vehicle modeling tool showed up to a 10.9% improvement in range for the full system over the baseline during warmup from cold soak. The full system with preheat showed up to 17% improvement in range.

33 ADVANCED PROPULSION SYSTEMS↗