Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Subsonic and transonic pressure distributions around a bluff afterbody in the wake of a 120 deg cone for various separation distances

A wind-tunnel investigation was conducted at free-stream Mach numbers from 0.20 to 1.00 and Reynolds numbers, based on maximum afterbody diameter, from 2.25 million to 6.90 million on solid models of an attached inflatable decelerator (AID) concept. Tests were conducted to obtain static and ram surface pressure distributions about the basic shapes and at various separation distances between the 120 deg conical forebody and the inflated afterbody shape. The resulting data were used to study the feasibility of extracting a payload from a conical forebody by means of an AID.

Sawyer, J. W.↗

The aerodynamic characteristics of large angled cones with retrorockets

Analytical and experimental phases of the subject investigation are described. The analytical program for the single jet determines the terminal shock location, the jet boundary, the interface profile, the bow shock profile, the shear layer growth and the dead air region pressure. The experimental program described was conducted over the range from free stream Mach 0.4 to 2.0 at angles-of-attack up to 18 deg and at thrusting coefficients up to C sub T = T/q sub infinity A sub m = 30. Variables investigated included aeroshell angle, number of nozzles, engine thrust, size of nozzles, nozzle throttling and gas composition. The influence of these variables on the aeroshell stability, drag, and loads was determined by integrating pressure measurements on the aeroshell. The total system forces consist of components due to pure thrust and components due to pressure on the aeroshell arising from the jet-free stream interaction. Shadowgraphs provided flow field geometries which proved to be within 10% of those predicted analytically.

Jarvinen, P. O.↗

Cone transitional boundary-layer structure at Me = 14.

Experimental results suggest that the boundary-layer mean profiles in hypersonic flows may be highly transitional in the outer part of the boundary layer before the transition process is detected at the surface. Means of determining the initial location where the transition process begins in the outer part of the boundary layer are considered.

Fischer, M. C.↗

Flared-cone turnstile antenna

Antenna could be used in any application where increased ultrahigh frequency beamwidth is desired. Possible applications include aircraft, communication links, ground omniranges, and satellites. It is also possible that antenna could be adapted for use in television transmission and receiving.

Gavrillis, T. G.↗

Thermal performance of 625-kg/cu m elastomeric ablative materials on spherically blunted 0.44-radian cones

Spherically blunted 0.44-radian (25 deg) half-angle conical models coated with elastomeric ablative materials were tested in supersonic arc-heated wind tunnels to evaluate performance of the ablators over a range of conditions typical of lifting entry. Four test conditions were combinations of stagnation point-heat transfer rates of 2.3 and 4.5 MW/m2 and stagnation pressures of 20 and 2kN/m2. Afterbody values of heat transfer rate and pressure were 0.05 to 0.20 of stagnation point values. Stagnation enthalpy varied from 4.4 to 25 MJ/kg (1900 to 11000 Btu/lbm) and free-stream Mach number was in a range from 3.5 to 4. Ablative materials retained the spherical nose shape throughout tests at the lower heat transfer level, but receded, assuming a flattened nose shape, during tests at the high heat transfer level. The residue layer that formed on the conical after-body was weak, friable, and extensively cracked. The reference ablative material, which contained phenolic microspheres, generally retained the conical shape on the model afterbody. However, a modified ablator, in which phenolic microspheres were replaced with silica microspheres, deformed and separated from the undegraded material, and thereby produced a very uneven surface. Substrate temperatures and ablator recession were in good agreement with values computed by a numerical analysis.

Champman, A. J.↗

Fluctuating surface pressure characteristics on slender cones in subsonic, supersonic, and hypersonic Mach-number flow

A program is presented to determine the flow-induced unsteady aerodynamic loads on space-shuttle orbiter configurations in the early reentry phase. Experiments on 8 degree half-angle cone/flat-base configurations were conducted at free-stream Mach numbers of 6 and 15 and Reynolds numbers corresponding to shuttle reentry. Data are available at free-stream Mach-numbers of 0.67, 2.5, 3, 4, 6, 15, and 22. It is shown that empirical expressions could be developed for the Mach-number dependence of the overall fluctuation pressure under an attached turbulent boundary layer and under a separated base-flow region.

Heller, H. H.↗

An approximate inviscid radiating flow-field analysis for sphere-cone Venusian entry vehicles

A computational method based on the earlier work of one of the authors has been improved and modified to provide an accurate and rapid prediction of the radiating flow about blunt conical probes entering the atmosphere of Venus. Special features include a more general approximate equation of state, a more rapidly converging iteration scheme, a 38-step absorption coefficient model for a Venus atmosphere gas mixture model, and a shock-shape formula which yields a computed body shape in excellent agreement with the desired body. The method was used to calculate distributions of radiative heating for a large spherically blunted conical probe vehicle (1.219 m base diameter) and for three small spherically blunted conical probe vehicles (0.724 m base diameter). Solutions obtained with the presently developed approximate method required short computing times of the order of 1 to 3 minutes for each complete solution and gave agreements of 10% to 15% with the more exact predictions.

Falanga, R. A.↗

Inviscid flow about blunted cones of large opening angle at angle of attack

Application of a general method for calculation of inviscid hypersonic flow fields is discussed. General considerations are analyzed along with the sonic corner and the stagnation region. It is concluded that the complications caused by the requirement for sonic flow at the rear corner and particularly by the uncertain position of the stagnation streamline lead to sufficient difficulties with convergence of iterations that a practical procedure is not likely to be found.

Maslen, S. H.↗

Tangent-ogive nose cones

Program calculates aerodynamic heating and shear stresses at wall for tangent-ogive noses that are slender enough to maintain an attached nose shock during portion of flight when heat transfer from boundary layer to wall is significant.

Wing, L. D.↗

TRASYS: Checkout of accuracy of direct irradiation calculations for discs, trapezoids, cones, and circular paraboloids

Results of the direct irradiation link of the TRASYS program are evaluated. Several surface configurations were investigated. The accuracy of the results was examined for simple cases where the answers were analytically known. By varying an accuracy factor in the program, the amount of computer time needed to achieve different degress of accuracy was determined.

Mackeen, R. C.↗

Subsonic stability and control flight test results of the Space Shuttle /tail cone off/

The subsonic stability and control testing of the Space Shuttle Orbiter in its two test flights in the tailcone-off configuration is discussed, and test results are presented. Flight test maneuvers were designed to maximize the quality and quantity of stability and control data in the minimal time allotted using the Space Shuttle Functional Simulator and the Modified Maximum Likelihood Estimator (MMLE) programs, and coefficients were determined from standard sensor data sets using the MMLE, despite problems encountered in timing due to the different measurement systems used. Results are included for lateral directional and longitudinal maneuvers as well as the Space Shuttle aerodynamic data base obtained using the results of wind tunnel tests. The flight test data are found to permit greater confidence in the data base since the differences found are well within control system capability. It is suggested that the areas of major differences, including lateral directional data with open speedbrake, roll due to rudder and normal force due to elevon, be investigated in any further subsonic flight testing. Improvements in sensor data and data handling techniques for future orbital test flights are indicated.

Cooke, D. R.↗

A simulation study of cold electron heating by loss cone instabilities

Results are presented of a computer simulation study of electron cyclotron harmonic waves; an electrostatic finite size particle simulation code is used. The initial electron velocity distribution function is modeled as a hot ring perpendicular to the ambient magnetic field and a cold Maxwellian component. Nonlinear cyclotron resonance is found to be the saturation mechanism of the unstable waves and the heating mechanism of the cold electrons. The results can be related to certain ionospheric phenomena.

Ashour-Abdalla, M.↗

Theory and calibration of non-nulling seven-hole cone probes for use in complex flow measurement

A seven-hole conical pressure probe capable of measuring flow conditions at angles up to 75 deg relative to its axis is described. The theoretical rationale of the seven-hole probe is developed and the calibration procedure outlined. Three-variable third order polynomials are used to represent local values of total pressure, static pressure, Mach number and relative flow angles. These flow conditions can be determined explicitly from measured probe pressures. Flow angles may be determined within 2.5 deg and Mach number within 0.05 with 95% certainty. The probe was calibrated in subsonic compressible and incompressible flows. Results of a calibration of four seven-hole probes are presented.

Everett, K. N.↗