Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Comparative Evaluation of Creep-Rupture Behavior of P9 Steel Plate and Thick Section Tubeplate Forging

In the present investigation, creep-rupture behavior of P9 steel in two different product forms of 20-mm plate and 300-mm-thick tubeplate forging has been studied at 793 and 873 K. It has been found that steady-state creep rate and rupture life followed power law dependence on applied stress at low and high stress regimes for both forms of products. At high stress regime, P9 steel plate exhibited better creep strength with respect to tubeplate forging in terms of lower creep rate and higher rupture life at 793 and 873 K. On contrary, both product forms exhibited similar creep rate and rupture behavior in the low stress regime at 873 K. Difference in creep ductility has been found to be insignificant in both product forms. Irrespective of test conditions and product forms, fracture appearance remained transgranular ductile characterized by dimples. The comparative evaluation of creep-rupture properties of both product forms has also been described in terms of creep rate-rupture life relationships of Monkman–Grant type, creep damage tolerance and tertiary creep characteristics at 793 and 873 K.

36 MATERIALS SCIENCE↗
DOE OSTI2019

The Effect of Annealing Time on Microstructure and AC Corrosion Behavior of X80 Steel in Simulated Solution of Alkaline Soil

The alternating current (AC) corrosion behavior of X80 steels annealed for different times was investigated in an alkaline soil simulation solution by electrochemical measurement, immersion test and surface analysis technology. The results show that with or without AC interference, the steels annealed for various times have different corrosion resistance. The anticorrosion resistance of steel improves with an increase in annealing time. AC interference results in the evolution of the main cathodic reaction, and facilitates the corrosion of the steels. The steel annealed for 20 min presents a more severe corrosion degree with distinct pits. The corrosion behavior of the steels annealed for different times with AC application is closely related to the microstructure. A decrease in pearlite reduces the number of galvanic corrosion cells, decreasing the corrosion rate of steel. And the grain increase is beneficial for improving the corrosion resistance of the annealed steel.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Microstructure and Three-Point Bending Fatigue Behavior of Al-Cu-Mg-Ag Alloys with Various Mg Contents

This paper presents an investigation on the influence of Mg content on the microstructures, tensile properties and three-point bending fatigue behavior of Al-Cu-Mg-Ag alloys. The results indicate that the alloy containing 0.70 wt.% Mg possesses lower tensile properties and higher fatigue performance compared to the one with 1.15 wt.% Mg. Increasing Mg content in Al-Cu-Mg-Ag alloys can enhance the nucleation and precipitation of Ω phase, as well as increase the volume fraction and number density of constituent particles. The investigation of the fatigue crack initiation and growth behavior of Al-Cu-Mg-Ag alloy using interrupted fatigue tests suggests that micro-cracks mainly nucleate on Al{sub 2}Cu constituent particles and the fatigue life is mainly associated with the density of constituent particles.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effect of Electropulsing on Surface Mechanical Behavior and Microstructural Evolution of Inconel 718 during Ultrasonic Surface Rolling Process

In the current study, the surface mechanical behavior and microstructural evolution of Inconel 718 superalloy processed by the ultrasonic surface rolling process (USRP) and electropulsing-assisted ultrasonic surface rolling process (EP-USRP) were carefully analyzed. The experimental results suggested that after EP-USRP with a frequency of 400 Hz, significant enhancements in Vickers microhardness and nanoindentation hardness were achieved compared to those of USRP specimens, with increases of 13.6 and 9.9%, respectively. Moreover, the machined surface quality, wear resistance, and thermal stability were also improved after EP-USRP (400 Hz). These enhancements in mechanical behavior are closely related to the microstructural evolution induced by electropulsing. Under the coupling of thermal and athermal effects of high-energy electropulsing, the deformation limit of USRP is surpassed and a new balance is achieved between the electropulsing softening effect and the ultrasonic rolling hardening effect. Therefore, further grain refinement, improved plastic deformation ability in the strengthened layer, and the interaction effect between nano-sized precipitates and grain boundaries are probably the main reasons for these results.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Evolution of Microstructure and Creep Behavior in an Fe-Ni-Cr-Nb-C Alloy during Service in Hydrocarbon Cracker Tubes

Heat resistant, cast austenitic Fe-Ni-Cr-Nb-C alloy tubes are used by the petrochemical industry to transport hydrocarbons at temperatures between 850 and 1050 °C. Exposure to carbon from the process stream and nitrogen from the air causes severe carburization and nitridation in the tube walls, which influences creep resistance and degrades their ductility. A better understanding of these processes would enable their service life to be extended. To this end, we report the results of an experimental and computational study of the changes in microstructure and creep behavior in a representative alloy during service. The microstructure of the fresh material is compared to that of 8- and 10-year-old tubes. The results confirm the presence of M{sub 23}C{sub 6}, M{sub 7}C{sub 3}, and M{sub 2}(CN) phases reported in prior studies, and also reveal the nucleation and growth of the carbo-nitride phase M{sub 6}(CN). We show that the spatial variations of carbide and nitride particle volume fractions in aged tubes can be predicted by a simple reaction–diffusion equation. In addition, the uniaxial compressive creep response of the fresh and aged tubes was obtained as functions of temperature and strain rate. The materials deform by power-law creep, with strain rate versus stress relation as ε-dot =Aσ{sup n}. Aging reduces the stress exponent from n = 8 in fresh tubes to n = 5 in aged tubes, and also reduces the pre-exponential coefficient A. Tests on model alloys with composition identical to that of the matrix combined with finite element simulations of creep in model microstructures reveal that Cr depletion is responsible for the change in stress exponent, while the change in A is caused by the increase in particle volume fraction. By combining the microstructure-scale simulations of creep with the predictions of the reaction–diffusion model of microstructure evolution, the creep behavior of tubes left in service beyond 10 years is estimated.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Constitutive Modeling of the Hot Deformation Behavior in 6082 Aluminum Alloy

The hot compressive tests of 6082 aluminum alloy were conducted on a Gleeble-3500 thermomechanical simulator at temperature ranges of 380-530 °C and strain rate range of 0.01-10 s{sup −1}. The constitutive analysis and microstructural evolution of the alloy were investigated. It was indicated that the peak stress increased with increasing strain rate and decreasing temperature. Dynamic recovery and dynamic recrystallization lead to the softening behavior of the alloy. In order to characterize the flow behavior of this alloy, some models were established based on the experimental data including the phenomenological Arrhenius-type model, the physically based Estrin and Mecking (EM) model for work hardening and dynamic recovery, and the EM model, which was combined with the Avrami equation for dynamic recrystallization. An artificial neural network model was also established to predict the flow stress. The results indicate that the Arrhenius-type model is more simple and more efficient than the EM + Avrami model. Moreover, the well-trained ANN model has the best predicting performance.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Multi-Dimensional Simulation of LWR Fuel Behavior in the BISON Fuel Performance Code

Nuclear fuel operates in an extreme environment that induces complex multiphysics phenomena occurring over distances ranging from inter-atomic spacing to meters, and times scales ranging from microseconds to years. To simulate this behavior requires a wide variety of material models that are often complex and nonlinear. The recently developed BISON code represents a powerful fuel performance simulation tool based on its material and physical behavior capabilities, finite-element versatility of spatial representation, and use of parallel computing. The code can operate in full three dimensional (3D) mode, as well as in reduced two dimensional (2D) modes, e.g., axisymmetric radial-axial (R-Z) or plane radial-circumferential (R-θ), to suit the application and to allow treatment of global and local effects. A BISON case study was used in this paper to illustrate analysis of Pellet Clad Mechanical Interaction failures from manufacturing defects using combined 2D and 3D analyses. The analysis involved commercial fuel rods and demonstrated successful computation of metrics of interest to fuel failures, including cladding peak hoop stress and strain energy density. Finally, in comparison with a failure threshold derived from power ramp tests, results corroborate industry analyses of the root cause of the pellet-clad interaction failures and illustrate the importance of modeling 3D local effects around fuel pellet defects, which can produce complex effects including cold spots in the cladding, stress concentrations, and hot spots in the fuel that can lead to enhanced cladding degradation such as hydriding, oxidation, CRUD formation, and stress corrosion cracking.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2018

Correlations Between Powder Feedstock Quality, In Situ Porosity Detection, and Fatigue Behavior of Ti-6Al-4V Fabricated by Powder Bed Electron Beam Melting: A Step Towards Qualification

Ti-6Al-4V is the most studied alloy via electron beam melting (EBM) with regards to microstructure and mechanical behavior, but there have been no attempts to correlate in situ porosity detection and fatigue behavior. This is required for widespread adoption of EBM because conventional evaluation is often time-consuming and expensive. This study presents the use of near-infrared imaging to detect and quantify porosity in Ti-6Al-4V builds fabricated from different powder feedstocks and its correlation to their fatigue response. Finally, we report that, for identical processing parameters, the variability in powder feedstock causes variations in porosity and scatter in the respective fatigue response.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Field-Dependent Magnetic Domain Behavior in van der Waals Fe 3 GeTe 2

Two-dimensional magnetic van der Waals (vdW) materials can show a variety of topological nontrivial spin textures, such as Bloch- or Néel-type stripe, skyrmion, or bubble domains under certain external stimuli. It is critical to understand the magnetic domain behavior in vdW materials in order to control their size and density in response to external stimuli, such as electric and magnetic fields. In this study, we examine the magnetic field dependence of topologically non-trivial magnetization spin textures in vdW Fe 3 GeTe 2 . Néel-type stripe domains and skyrmions are formed depending on the magnetic field-cooling protocol used during in situ Lorentz transmission electron microscopy (LTEM) experiments. Use of quantitative reconstruction of magnetic induction maps and micromagnetic simulations allow for the understanding of the LTEM results of Néel-type stripe domains as well as skyrmions. In addition, the deformation of skyrmion contrast is observed as a result of the introduction of an in-plane magnetic field. We demonstrate the stability of the stripe domains and skyrmions in response to an externally applied magnetic field due to an energy barrier for domain wall annihilation. Our results establish an understanding of the energy landscape that governs the behavior of the topologically non-trivial spin textures in vdW materials which can be harnessed for spintronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Deformation and Fracture Behavior of Additively Manufactured 316L Stainless Steel

Tensile deformation and fracture behavior of an additively manufactured (AM) 316L stainless steel (SS) in the as-built, stress-relieved, and solution-annealed conditions was investigated using in situ tensile testing in a scanning electron microscope with an electron back scattering diffraction (SEM–EBSD) detector. Analyses were performed to discuss the characteristic deformation and fracture process of the fine-grained AM 316L SS with and without relaxation heat treatment. The as-built 316L showed the highest strength, and both post-build heat treatments lowered the strength of the alloy. Regardless of the post-build processing, the AM 316L SS showed overall higher strength but slightly lower ductility when compared to the wrought (WT) 316L SS. Analysis of EBSD data indicated that the characteristic microstructural features from AM, such as the complex and fine grain morphology, dislocation network, pores, and silicon-rich oxides, evolved and exerted various roles during the tensile deformation and fracture processes. Further, it was obvious that the interaction of dislocation slips with oxide particles and cavities (or pores) resulted in an accelerated cracking in AM 316L SS. Overall, however, their influence on mechanical behavior was limited, as the genuinely high ductility of 316L SS could help avoid any premature or brittle fracture.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Design, characterization and shape recovery behavior of 3D/4D printed shape memory polymers (SMPs)

Shape memory polymers (SMPs) represent a paradigm shift in material science, uniquely capable of undergoing reversible shape transformations triggered by external stimuli, positioning them as pivotal in developing next-generation biomedical devices, aerospace components, and adaptive structures. Extensive research has been done on SMPs with a major focus on high-temperature programming methods, which can limit energy efficiency and applicability with temperature-sensitive materials. Additionally, while various SMP blends have demonstrated great potential, limited work has been done on the suitability for 3D printing these materials, particularly under high-strain and ambient temperature programming conditions. In this study, a three-component optimized SMP composition was evaluated by 3D printing via the Material Extrusion (MEX) technique and investigating its ambient temperature-programming behavior at high strains. The SMP formulation studied was a tailored blend of thermoplastic polyurethane (TPU), polycaprolactone (PCL), and an octadecane diol-based copolymer (OBC) that exhibits robust shape memory behavior, high strain tolerance, and efficient force generation. Rigorous thermal, mechanical, and shape recovery analyses, along with optimized printing parameters and consistent shape recovery rates of up to 90%, were achieved under dynamic mechanical analysis (DMA), even under ambient programming conditions. This work demonstrates the SMP composition’s potential for adaptive, self-deployable systems with 4D printing characteristics ideal for bio-inspired structures and artificial muscle fibers.

Sudan, Kavish [University of Louisville, KY]↗
DOE OSTI2020

Pitting behavior of friction stir repair-welded 304L stainless steel in 3.5% NaCl solution at room temperature: role of grain and defect structures

Stainless steel (SS) canisters used for storing spent nuclear waste are prone to chloride-induced stress corrosion cracking. Friction stir welding (FSW), being a low heat input process, can be used for repair welding of these canisters. In this study, an artificial crack was introduced on the 304L SS coupons by an electric discharge machining process. The artificial crack was repair-welded by FSW by maintaining the tool temperature a constant at two levels (725 and 825 °C). Friction stirring significantly reduced the grain size of the stirred zone (SZ) from about 47 to 2–4 μm. The fraction of low-angle grain boundaries increased in the SZ from 2 to 37–43%. Here, on the other hand, the fraction of special grain boundaries (Σ3 and Σ9) that was ~ 50% in the base metal reduced to < 10% in the SZ. During friction stirring, the oxide layer of artificial crack was broken and aligned to form a spiral defect called lazy-S structure. All these microstructural changes affected the corrosion behavior of the FSW specimens when tested in 3.5% NaCl at room temperature using cyclic polarization, chronoamperometry, and electrochemical impedance spectroscopy. The FSW specimens showed lower polarization resistance and lower transpassive potential than those of the base metal specimens. However, the pitting protection potentials of the FSW specimens were higher than that of the base metal. The pitting behavior of the FSW specimens was influenced more by the preferential attack on the lazy-S region than by passive film breakdown. The flat band potentials of the passive film formed on the FSW specimens were more positive than that of base metal. The charge carrier density of passive film formed on the FSW specimens was higher than that of the base metal. The higher fraction of low-angle grain boundaries present in the FSW specimens could supply more number of misorientation dislocations at the metal/film interface which could form anion vacancies by a climb process leading to formation of oxide at these locations without stressing the substrate. Therefore, low-angle boundaries are considered helpful for formation of stress-free passive films that will be highly stable and enhance both pitting and stress corrosion cracking resistance.

Dry storage canister↗
DOE OSTI2017

The effect of grain orientation on nanoindentation behavior of model austenitic alloy Fe-20Cr-25Ni

Instrumented nanoindentation was used in this paper to investigate the hardness, elastic modulus, and creep behavior of an austenitic Fe-20Cr-25Ni model alloy at room temperature, with the indented grain orientation being the variant. The samples indented close to the {111} surfaces exhibited the highest hardness and modulus. However, nanoindentation creep tests showed the greatest tendency for creep in the {111} indented samples, compared with the samples indented close to the {001} and {101} surfaces. Scanning electron microscopy and cross-sectional transmission electron microscopy revealed slip bands and dislocations in all samples. The slip band patterns on the indented surfaces were influenced by the grain orientations. Deformation twinning was observed only under the {001} indented surfaces. Finally, microstructural analysis and molecular dynamics modeling correlated the anisotropic nanoindentation-creep behavior with the different dislocation substructures formed during indentation, which resulted from the dislocation reactions of certain active slip systems that are determined by the indented grain orientations.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Temperature-dependent micromechanical behavior of medium-Mn transformation-induced-plasticity steel studied by in situ synchrotron X-ray diffraction

The temperature-dependent micromechanical behavior of medium-Mn transformation-induced-plasticity (TRIP) steel with a nominal chemical composition of Fe-0.1C-10Mn-2Al (mass%) fabricated by intercritical annealing 650 ºC for 1 h after cold-rolling, was investigated using in situ high-energy X-ray diffraction (HE-XRD) with uniaxial tensile tests at temperatures of 100, 25 and -50 ºC. We find that as the deformation temperature decreases, the Luders strain decreases and more austenite transforms to martensite during Luders band propagation. The Luders bands are associated with sudden changes of lattice strain in austenite. At 100 ºC, austenite is too stable to transform to martensite, resulting in limited work-hardening capability and a relatively low strain to failure. At 25 ºC, the austenite is found to transform in bursts during applied loading. These transformations correlate with stepwise peak broadening in the austenite phase and are attributed to Portevin-Le Chatelier (PLC) band propagation. At -50 ºC, we then observe a more intense TRIP effect which suppresses PLC band formation and leads to a high ultimate tensile strength. In addition to the TRIP effect, we find that work hardening in the deformation-induced martensite phase plays an important role in the plastic stability at low temperature, by accommodating stress compatibility between grains and phases. Our studies provide the first direct experimental evidence for the existence of large stress concentrations in the austenite phase near the Luders band propagation front. These observations help to deepen understanding of the complex temperature-dependent micromechanical behaviors of advanced medium-Mn TRIP steels.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Microstructure stability and micro-mechanical behavior of as-cast gamma-TiAl alloy during high-temperature low cycle fatigue

This paper systematically investigated the low cycle fatigue deformation of a high Nb-containing TiAl alloy with a nominal chemical composition of Ti-45Al-8.5Nb-0.2W-0.2B-0.02Y at 850 °C by using transmission electron microscopy (TEM), scanning electron microscopy (SEM), and synchrotron-based high-energy X-ray diffraction (HE-XRD) techniques. Cyclic stress-strain (CSS) behavior, lattice strain, and peak broadening of {100} α2 , {201} γ , and {202} ωo planes, phase transformations, and crack propagation behavior were obtained for samples with three total strain amplitudes: Δε t /2 = ±0.25%, Δε t /2 = ±0.28%, and Δε t /2 = ±0.30%. At early deformation stages, α 2lamellae transformed into ωo phase with a distinct orientation relationship, and a certain orientation relationship (OR) between them was observed after the following cyclic deformation. Furthermore, γ particles precipitated within the single ω o area. In addition, according to the peak intensity and peak broadening results, the ω o → B2 phase transformation occurred, leading to the appearance of single B2-phase areas. The lattice strains in the ω o phase were always in tension during the cyclic deformation and large differences of the lattice strains were found in the γ phase and α 2 phase, not only the values but also the directions, which resulted in crack nucleated at and propagated along the α 2 /γ lamellar interface. Finally, this study provides a better understanding of the low cycle fatigue deformation of TiAl alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2025

MX precipitate behavior in an irradiated advanced Fe-9Cr steel: Helium effects on phase stability

As part of an ongoing series aimed at optimizing Fe-9Cr reduced activation ferritic/martensitic (RAFM) alloys for fusion energy systems, this study explores MX precipitate behavior under dual-ion irradiations, specifically examining correlations between helium transmutation and irradiation-induced damage. Utilizing single and dual-beam ion irradiation, the research explores the combined effects of helium (10–25 appm He/dpa), temperature (400–600 °C), and damage levels (15–100 dpa) on the microstructural evolution of CNA9 steel, a variant of Castable Nanostructured Alloys (CNAs). The study demonstrates that helium co-implantation hinders radiation-enhanced coarsening of MX-TiC precipitates at 500 and 600 °C, maintaining MX-TiC precipitate stability at moderate damage levels (15 dpa) but failing to prevent complete precipitate dissolution at higher damage levels (≥50 dpa) when irradiated at 500 °C. Here, a generalized precipitate stability model suggests that helium-induced suppression of diffusion alters the balance between recoil resolution and back diffusion for MX-TiC precipitates, enhancing the current understanding of precipitate behavior under damage and transmutation simulated dual-ion irradiation conditions.

Characterization↗
DOE OSTI2016

Characterization of fatigue crack growth behavior in LENS fabricated Ti-6Al-4V using high-energy synchrotron x-ray microtomography

Laser Engineered Net Shaping (LENS) is an additive manufacturing technique that belongs to the ASTM standardized directed energy deposition category. To date, very limited work has been conducted towards understanding the fatigue crack growth behavior of LENS fabricated materials, which hinders the widespread adoption of this technology for high-integrity structural applications. In this study, the propagation of a 20 μm initial crack in LENS fabricated Ti-6Al-4V was captured in-situ, using high-energy synchrotron x-ray microtomography. Fatigue crack growth (FCG) data were then determined from 2D and 3D tomography reconstructions, as well as from fracture surface striation measurements using SEM. The generated data were compared to those obtained from conventional FCG tests that used compliance and direct current potential drop (DCPD) techniques to measure long and small crack growth. In conclusion, the observed agreement demonstrates that x-ray microtomography and fractographic analysis using SEM can be successfully combined to study the propagation behavior of fatigue cracks.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Investigation of dynamic fracture behavior of additively manufactured Al-10Si-Mg using high-speed synchrotron X-ray imaging

The dynamic tensile properties of additively manufactured (AM) and cast Al-10Si-Mg alloy were disccused using high-speed synchrotron X-ray imaging coupled with a modified Kolsky bar apparatus. A controlled tensile loading (strain rate &approx; 750 s -1 ) was applied using the Kolsky bar apparatus and the deformation and fracture behavior were recorded using the high-speed X-ray imaging setup. The CT and high-speed imaging results worked together to identify the location of the critical flaw and to capture the dynamics of crack propagation. In all experiments, the critical flaw was located on the surface of each specimen. The AM specimens displayed significantly higher crack propagation speed, yield strength, ultimate tensile strength, strain hardening coefficient, and yet lower ductility compared to the cast specimens under dynamic tension. Although the strength values were higher for the AM specimens, the critical mode I stress intensity factors were comparable for both specimens. The microstructures of the samples were characterized by synchrotron X-ray computed tomography (CT) and scanning electron microcopy. The correlation between the dynamic fracture behavior of the samples and the microstructure of the samples is analyzed and discussed.

36 MATERIALS SCIENCE↗