Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Airport”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

A Comparison of Terrestrial Saltation Flux in the Laboratory and the Field

Aeolian transport of surficial material is an important part of the terrestrial geologic cycle. In many areas of geological interest, sand is not transported by the wind at the rate predicted by studies made in idealized conditions. Furthermore, calculated surface-abrasion rates based on laboratory saltation fluxes are often unrealistically high. This work is an attempt to quantify and discuss discrepancies between saltation rates under ideal conditions and in the field under natural conditions. The saltation-flux data persented by Sharp (1) will be used as the field data. Sharp measured saltation flux during four periods in the early 1950's in the Whitewater River drainage. Meteorological conditions at the experiment site were extrapolated from the airport records and from wind speeds measured simultaneously by Hunter. Wind speeds above threshold were sorted into 4-MPH bins and the frequency of observation over each experimental period was calculated. A saltation flux for each bin was calculated and summed to yield a predicted saltation rate for that period. When the predicted fluxes were compared with those measured by Sharp, large discrepancies were found.

Williams, S. H.↗

Seventh Annual Workshop on Meteorological and Environmental Inputs to Aviation Systems 26-28 October 1983, Tullahoma, Tennessee

A summary of reports and recommendations resulting from the Workshop on Meteorological and Environmental Inputs to Aviation Systems is presented. The Workshops have been held to characterize the interaction between aircraft and airport operators with the atmosphere, identify necessary meteorological enhancements, and establish criteria for meteorological data needed by the aviation community. The topics covered included winds and wind shear, turbulence, fog, visibility and ceiling, lightning and atmospheric electricity, icing, frost and snow, rain, ozone and acid rain. The recommendations issued included a denser meteorological network with more automated stations, the development of radar systems for icing forecasts and wind shear alerts, the accumulation of a greater data base on convective cells and lightning strikes, and further study of the impact of rain on aircraft performance.

Camp, D. W.↗

Dual Doppler lidar measurements of winds in the JAWS experiment

Differences are noted in the operations of Doppler lidar and radar for the case of a thunderstorm outflow observed during the Joint Airport Weather Studies project field experiments. Calculated wind fields agreed with surface wind observations made routinely by the Portable Automated Mesonet stations. The lidar data are found to complement Doppler radar observations; while the latter is superior for the measurement of wind fields within convective storms, the former is more useful in examinations of dynamical processes in regions outside storm.

Rothermel, J.↗

JAWS data collection, analysis highlights, and microburst statistics

Organization, equipment, and the current status of the Joint Airport Weather Studies project initiated in relation to the microburst phenomenon are summarized. Some data collection techniques and preliminary statistics on microburst events recorded by Doppler radar are discussed as well. Radar studies show that microbursts occur much more often than expected, with majority of the events being potentially dangerous to landing or departing aircraft. Seventy events were registered, with the differential velocities ranging from 10 to 48 m/s; headwind/tailwind velocity differentials over 20 m/s are considered seriously hazardous. It is noted that a correlation is yet to be established between the velocity differential and incoherent radar reflectivity.

Mccarthy, J.↗

The structure of a microburst - As observed by ground-based and airborne Doppler radar

Attention is given to the microburst observed near Denver, CO, on June 29, 1982, in the course of the Joint Airport Weather Study (JAWS). The JAWS ground radar network was specifically established to furnish high spatial and temporal resolution multiple Doppler data for microburst observations. The data, which were collected from directly above the microburst, permitted direct measurements of vertical velocities to be made. P-3 surveillance aircraft Doppler data was also available for this microburst, whose considerable complexity is noted.

Mueller, C. K.↗

Aircraft performance in a JAWS microburst

Attention is given to the detailed features of a servere microburst event, the flight behavior of a 727 airliner in such an event as predicted by a numerical simulation, and several low level wind shear detection and warning concepts. The Joint Airport Weather Studies project data sets are the basis of the numerical simulation. The calculation of meaningful flight paths under varying wind conditions for microburst avoidance is demonstrated.

Frost, W.↗

Microbursts in JAWS depicted by Doppler radars, PAM, and aerial photographs

Preliminary results obtained from the JAWS (Joint Airport Weather Studies) Project near Denver, Colorado in the spring and summer of 1982 using Doppler radar, PAM, and aerial photography are presented. The definitions of the microburst phenomenon are discussed, and statistics comparing NIMROD (Northern Illinois Meteorological Research On Downbursts) for the Midwest region are compared with JAWS for the High Plains region. Possible parent clouds of the microburst are considered, and an analysis of a macroburst/microburst event on July 14, 1982 is presented.

Fujita, T. T.↗

Ground based concept for time control of aircraft entering the terminal area

This paper summarizes current research for increasing the efficiency of traffic flow at hub airports by application of four dimensional (4D) guidance techniques. A method for generating 4D guidance commands to control the landing time of aircraft that are not equipped with on-board 4D guidance systems is described. In one possible implementation the commands are generated in an auxiliary processor linked to the ATC host computer and displayed on a controller's monitor in the form of profile descent advisories. Accurate time control is achieved by generating air traffic controller advisories in a ground-based algorithm that combines aerodynamic, thrust and atmospheric models with an efficient numerical integration method. The time accuracy and fuel efficiency achieved when the pilot responds to these advisories were evaluated in a piloted simulation of a transport aircraft.

Erzberger, H.↗

Algorithm for Fuel-Conservative Airplane Descents

Federal Aviation Administration implementing automated, time-based metering form of air-traffic control (ATC) with profile-descent procedures for arrivals into terminal area. Measures provide fuel savings by matching arrival of airplanes to airport acceptance rate through time-control computations and allowing pilot to descend at his discretion from cruise altitude to designated metering-fix altitude in idle-thrust clean configuration. Airborne descent algorithm developed compatible with time-based metering and profile-descent procedures and designed to improve accuracy of delivering airplane during fuel-efficient descent to metering fix at time designated by the ATC system.

Knox, C. E.↗

Some design philosophy for reducing the community noise of advanced counter-rotation propellers

Advanced counter-rotation propellers have been indicated as possibly generating an unacceptable amount of noise for the people living near an airport. This report has explored ways to reduce this noise level, which is treated as being caused by the interaction of the upstream propeller wakes and vortices with the downstream propeller. The noise reduction techniques fall into two categories: (1) reducing the strength of the wakes and vortices, and (2) reducing the response of the downstream blades to them. The noise from the wake interaction was indicated as being reduced by increased propeller spacing and decreased blade drag coefficient. The vortex-interaction noise could be eliminated by having the vortex pass over the tips of the downstream blade, and it could be reduced by increased spacing or decreased initial circulation. The downstream blade response could be lessened by increasing the reduced frequency parameter omega or by phasing of the response from different sections to have a mutual cancellation effect. Uneven blade to blade spacing for the downstream blading was indicated as having a possible effect on the annoyance of counter-rotation propeller noise. Although there are undoubtedly additional methods of noise reduction not covered in this report, the inclusion of the design methods discussed would potentially result in a counter-rotation propeller that is acceptably quiet.

Dittmar, J. H.↗

DFW (Dallas-Ft. Worth) microburst on August 2, 1985

The features of the microburst on August 2, 1985, related to the Delta 191 accident during the approach to Runway 17L of the Dallas-Ft. Worth Airport is described. Both radar and satellite data, along with ground-based measurements, were used in determining the characteristics of the parent cloud which spawned the most complicated microburst winds ever analyzed by the author. The detailed reconstruction of the airflow and the aircraft's maneuver were made possible by a series of computer analyses of the Digital Flight Data Recorder (DFDR) readout. Both measured and computed values in color diagrams that can be evaluated readily by meteorologists, pilots, structural engineers, and other interested persons in preventing microburst-related accidents in future years are presented.

Fujita, T. T.↗

Precipitation and kinematic structure of microburst producing storms

Single Doppler radar techniques are used to study the precipitation and kinematic structure of microburst-producing storms. Radar data collected by NCAR radars during the Joint Airport Weather Studies (JAWS) experiment are presented along with rawinsonde data taken at Denver, Colorado near the times of microburst occurrence. The radar reflectivity and velocity structure of the storms exhibited great variability, with no unique signature indicating a microburst was imminent. Detection of descending divergent flow is probably not a microburst forecasting tool, nor can the presence of rotation be used as a precursor at present. Convergent flow aloft was a prominent feature in all events. Its occurrence with a descending precipitation shaft and/or at high altitudes is a good indicator of a downdraft. It is concluded that convergent flow is a very important microburst forecasting clue, particularly when coupled with the entrainment of Theta(e) air and a dry-adiabatic lapse rate below cloud base.

Roberts, R. D.↗

Clear air mesocyclone during the JAWS project

Documentation is furnished for the clear air mesocyclone that propagated through the network of the Joint Airport Weather Studies project near Denver, CO, on June 5, 1982. Despite present classification as a mesocyclone, the analyses here reported have revealed two separate features affecting the area: a mesocirculation, defined by the kinematics of the wind field, and a mesolow, determined on the basis of the pressure field. The occurrence of these two conditions in the Denver area, in relation to the synoptic scale environment, raises a question as to whether this phenomenon is an example of cyclogenesis in the lee of a large mountain range.

Wakimoto, R. M.↗

Prospects for destructive self-induced interactions in a vortex pair due to sinusoidal disturbances

The vortex wakes of large transport aircraft can pose a hazard to smaller following aircraft in the vicinity of airports during landing and take-off operations if certain separation guidelines are not observed. In order to reduce the hazard potential, and thereby the separation distances, efforts are being made to find more rapid wake-dissipation mechanisms. In this paper numerical simulations are made of the three-dimensional time-dependent instabilities that might be initiated in a vortex pair by sinusoidal displacements of the filaments. The objective of the study was to find those displacements and phase angles that would produce the most rapid destruction of the vortices. It is concluded that, of the wave patterns tried on the one pair of wake filaments, the only instability mode that leads to destructive interactions of the vortices is the Scorer-Crow process.

Rossow, V. J.↗

Pilot evaluation of experimental flight trajectories in the near-terminal area

Advanced cockpit avionics systems now under development at NASA Langley Research Center will provide the means for effectively utilizing MLS technology to achieve a number of important objectives in the near-terminal airspace. A simulator study has recently been completed at NASA Langley Research Center in which guest pilots from a number of airlines were asked to fly curved ground tracks designed to avoid population centers in four airport communities. Eight two-man crews comprised of commercial line pilots, and three NASA crews each evaluated a total of eight departures and eight approaches on the basis of such factors as workload, safety, passenger acceptance, controllability, and piloting skill. Various physical measurements were also made, including cross-track errors, altitude errors, bank angles, and fuel flow rates. Half of the trajectories were curved and designed to be population-minimal, and half were designed to represent conventional ground tracks. The objective of the study was to determine if statistically significant differences could be detected between curved and conventional ground tracks on the basis of these parameters.

Deloach, R.↗

The analysis of airline flight records for winds and performance with application to the Delta 191 accident

Advanced analytical methods applied to airline digital flight records and ATC radar tracking data are providing new insights into atmospheric disturbances that cause serious operating problems for aircraft. Performance-based methods for estimating unmeasured flow angles and the possible influence of rain on lift and drag, and a state-estimation procedure for determining winds along the flightpath are reviewed. The methods are applied to data records from the Delta Flight 191 wind-shear accident at the Dallas/Ft. Worth Airport (August 2, 1985) which involved an L-1011 airliner on final approach. The results indicate that the aircraft encountered a strong downlow followed by a strong outflow accompanied by large and rapid changes in the vertical wind. This pattern of low-level winds is consistent with the model that treats a downburst as a vortex ring. Although rain was present in the downburst, the analysis showed no evidence of performance loss. The results obtained from analyses of airline turbulence encounters provide a means for simulating turbulence phenomena and for training pilots for future encounters.

Bach, R. E., Jr.↗

The impact of emerging technologies on an advanced supersonic transport

The effects of advances in propulsion systems, structure and materials, aerodynamics, and systems on the design and development of supersonic transport aircraft are analyzed. Efficient propulsion systems with variable-cycle engines provide the basis for improved propulsion systems; the propulsion efficienies of supersonic and subsonic engines are compared. Material advances consist of long-life damage-tolerant structures, advanced material development, aeroelastic tailoring, and low-cost fabrication. Improvements in the areas of aerodynamics and systems are examined. The environmental problems caused by engine emissions, airport noise, and sonic boom are studied. The characteristics of the aircraft designed to include these technical advances are described.

Driver, C.↗

Experimental and theoretical Doppler-lidar signatures of aircraft wake vortices

The DFVLR laser Doppler anemometer is a CO2 continuous wave homodyne system designed for boundary layer wind measurements. During the last three years, it was mainly used in the wake-vortex program at Frankfurt airport for determination of vortex strength, transport, and lifetime. The strategy for that special type of measurement was previously reported in detail along with single experimental results. Therefore, herein is given a short summary of the data concerning questions of air traffic control. In addition to the experimental activities a computer model describing wake-vortex behavior was installed. It allows the comparison of the measured data with the hydrodynamically predicted quantities. On the other hand, it leads to an improved procedure for future wake-vortex measurements.

Koepp, F.↗