Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ATTENTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Studies of Low and Intermediate Temperature Oxidation of Propane up to 100 Atm in a Supercritical-Pressure Jet-Stirred Reactor

Here, the low and intermediate temperature oxidation of propane has been investigated by using a novel supercritical pressure jet stirred reactor (SP-JSR) with and without 20% CO 2 additions at fuel lean and rich conditions at 10 and 100 atm and 500–1000 K. The mole fractions of C 3 H 8 , O 2 , CO, CO 2 , CH 2 O, C 2 H 4 , CH 3 CHO, and C 3 H 6 were quantified by using a micro-gas chromatograph (µ-GC). The experiment showed that different from that of 10 atm, at 100 atm only a weak negative temperature coefficient (NTC) behavior was observed because of the significant shift of the intermediate temperature HO 2 chemistry to lower temperature. In addition, at 100 atm, existing models in literatures could successfully capture the onset temperatures of the low and intermediate chemistry, while under-predict the fuel oxidation quantitatively and fail to capture the NTC behavior between 650 and 780 K at both fuel lean and rich conditions. Similar discrepancy was observed in studies of n-butane and dimethyl ether (DME) oxidations in literatures, implying that there existed large uncertainties in hierarchy model development of fuels with low temperature chemistries at extremely high pressures. Reaction pathways and sensitivity analyses showed that RO 2 competing reactions through (P1) RO 2 = QOOH, (P2) RO 2 = C 3 H 6 + HO 2 , (P3) RO 2 + CH 2 O/HO 2 = RO 2 H + HCO / O 2 dominated the low and intermediate temperature chemistries, followed by HO 2 / H 2 O 2 chemistry at 100 atm, which differed from the dominant pathway through QOOH consumption reactions at lower pressures. Especially, P3 is a new pathway of RO 2 consumption at high pressures, which was not observed in importance at low pressures. Special attention should be paid to the accurate computations of n-C 3 H 7 O 2 / i-C 3 H 7 O 2 + CH 2 O and n-C 3 H 7 O 2 / i-C 3 H 7 O 2 + in the P3 pathway and n-C 3 H 7 O 2 / i-C 3 H 7 O 2 decomposition reactions in the P2 pathway at high pressures.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Experimental and kinetic modeling study of the low- temperature and high-pressure combustion chemistry of straight chain pentanol isomers: 1-, 2- and 3-Pentanol

Pentanols have received significant attention as a potential alternative fuel or fuel additive owing to their high energy densities and low vapor pressure. The development of robust chemical kinetic models for alternative fuels which can provide accurate and efficient predictions of combustion performance across a wide range of engine relevant conditions is important in developing cleaner, more efficient combustors. Although the high temperature oxidation kinetics of pentanol isomers has been researched considerably, their low temperature combustion chemistry needs further investigation. While previously proposed low temperature mechanisms for 1-pentanol based on analogy and rate rules need further refinement, the low temperature oxidation kinetics of 2-pentanol and 3-pentanol has not been studied previously by any means, experimentally or theoretically. A newly developed kinetic mechanism is presented in this work for the three straight chain pentanol isomers: 1-, 2- and 3-pentanol. Low temperature kinetics is based on a recent study by Lockwood et al., 2022 [20] involving theoretical calculations at the CCSD(T)/cc-pV∞Z level of theory for the oxidation pathways involving alcohol peroxy radicals. Rate of production analyses performed in this study highlight the importance of the newly added pressure-dependent reactions of the α-alcohol peroxy radical forming an RO 2 adduct. While the α-alcohol fuel radical reacts with O 2 to directly decompose via a chemically activated pathway at low pressures, the formation of the RO 2 adduct is favored at high pressures. Furthermore, the detailed model is comprehensively validated against new ignition experiments at low temperature and high pressure, together with the wide range of data available in the literature. Both qualitative and quantitative predictions of the experimental data using the proposed kinetic model are satisfactory for all three pentanol isomers studied here.

1-pentanol↗
DOE OSTI2020

Optical super-resolution microscopy in polymer science

The advent of optical super-resolution microscopy (OSRM) over two decades ago has transformed light-mediated interrogation of systems down to the nanoscale. This innovative set of approaches to optics breaks the so-called diffraction limit of light (~200 nm), allowing for the first time to use optics in the far field to visualize behavior on nanoscopic length scales. While these visualization tools have rapidly found widespread use in biology and related fields, their implementation in materials and, more specifically, in polymer science has been far slower. To overcome possible barriers and highlight possible future directions, we present in this paper an introduction to OSRM for polymer scientists, beginning with an overview of relevant techniques and existing optical probes. We then show and examine the first examples of OSRM adaptation across major areas of polymer science, including: polymerization and structural characterization, self-assembly and solution behavior, bulk structure and behavior, crystallization, gel structure and behavior, phase transitions, and biofunctionality. We hope and anticipate that the discussions provided in this review will draw the attention of the polymer community to the capacities of these hitherto underexplored optical visualization techniques to further transform polymer science.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Online task-space motion control for positioner-coordinated multi-robot manufacturing systems

Incorporating multiple robotic manipulators into large-scale manufacturing systems enhances production efficiency and expands manufacturing capabilities beyond those of single-robot systems. Workpiece positioners in robotic manufacturing have demonstrated significant benefits for process optimization, but coordination strategies for multi-robot systems with shared positioners have received limited attention. This work presents a task-space coordinated trajectory-tracking control framework for multi-robot manufacturing systems, in which robots coordinate their motions within a shared, dynamic workpiece positioning frame. A workpiece positioner actively adjusts the pose of the manufactured component to enable greater operational concurrency and improve overall production efficiency. The proposed motion-coordination scheme employs a distributed and scalable architecture, supporting coordination across heterogeneous multi-robot systems. Two optimization methodologies are introduced to manage kinematic redundancies and maintain continuous, near-optimal operation throughout the manufacturing process. The first strategy exploits a task-space dimensionality reduction to achieve locally optimal configurations by leveraging symmetry-axis rotations of the tool. The second strategy utilizes the workpiece positioner to drive the coordinated robots toward stable and kinematically favorable configurations. For both optimization strategies, multiple objectives are defined to improve key performance metrics, including manipulability, configuration consistency, proximity to mechanical limits, and motion efficiency. Addressing a key limitation of existing coordination approaches, the framework is designed around online setpoint modification, allowing coordinated robots to respond effectively to in-situ process feedback. The proposed control framework is validated using the Robot Operating System (ROS) middleware on a combination of physical and simulated multi-robot system hardware.

Arbogast, Alex [ORNL] (ORCID:0000000154740723)↗
DOE OSTI2022

U.S. Cobalt: A Cycle of Diverse and Important Uses

We present a material flow and stock analysis for cobalt use and waste in the United States from 1996 to 2020, including the separation of cobalt flows into six product groups and five end-use sectors. The results demonstrate the importance of U.S. manufacturing for air travel, energy storage, cemented carbides, and numerous other applications. Battery use in the United States has become the primary factor in cobalt demand, but the batteries are manufactured mainly elsewhere. The correlation of cobalt products to principal end-use sectors provides an informed view of the location of cobalt in in-use stocks. Furthermore, two approaches could primarily address these stocks: enhanced recycling of batteries in consumer/business electronics and implementing cobalt-free substitutes for chemical uses and future battery technologies. Overall, cobalt's uses are as diverse and societally crucial as any element in the periodic table but have heretofore not received the levels of attention they deserve.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Re-directing mixed-feed deconstruction products to hybrid polyesters: Tolerance windows for commodity plastics reconstruction

Solvolysis is a promising strategy for mixed-feed polyester recycling, but little attention has been given to downstream product separations or the impact of using imperfectly separated monomer mixtures in recycled polymer reconstruction. Here, we challenge the traditional need for high-purity monomers in polycondensation synthesis of engineering thermoplastics. Monomer mixtures are derived from catalyzed methanolysis of polyethylene terephthalate (PET), polybutylene terephthalate (PBT), and polybutylene adipate-co-terephthalate (PBAT), with separation scenarios ranging from high (99:1) to low (90:10) purity. We focus on challenging-to-separate products like ethylene glycol and 1,4-butanediol and evaluate tolerance for comonomer incorporation in recycled hybrid polyesters: polybutylene-co-ethylene terephthalate (PBET) and polybutylene ethylene adipate-co-terephthalate (PBEAT). Evaluations are made between “contaminant” monomer incorporation, and the resulting materials’ thermal properties, crystalline structure, tensile toughness, and rheology. Ultimately, we highlight that despite incorporation of contaminant monomer, high-performance hybrid polyesters of PET, PBT, and PBAT are obtained while reducing the strain of high-throughput separations.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Oil price states and drivers: An analysis of the second-month spot-futures price differential

Oil remains a dominant component of global energy use, and its price, characterized by frequent changes and an ever-present potential for large swings, continues to be a focus of industry participants, policymakers and analysts attention. Here, this study examines the behavior of future spot oil prices using a continuous-time hidden Markov model (HMM) and daily price data spanning years 2007 to 2024. We identify six states in the second-month WTI spot-futures price differential and assess the roles of eleven futures price, quantity, financial market, and geopolitical/volatility variables in each state. The model yields several insights into the workings of the oil market and the relative roles of these drivers. We find support for several theoretical and empirical findings in the oil market literature, including the role of inventory, volatility/risk, and market responses to contango/backwardation in futures markets. A novel finding is that “normal contango” conditions represent a significant portion of next-day states in our in-sample data. Under the most volatile normal contango state, many of the oil market drivers differ markedly in coefficient signs and magnitudes from those in other states. The resulting model also performed well out-of-sample and would, in addition to understanding the impact of market drivers, be useful for short-term forecasting. Overall, the findings highlight the highly non-linear, regime-dependent interactions of the oil price and its drivers, emphasizing the importance of detailed information to market stakeholders.

Oladosu, Gbadebo A. [Oak Ridge National Laboratory↗
DOE OSTI2021

Quality control and crop characterization framework for multi-temporal UAV LiDAR data over mechanized agricultural fields

Recent developments in remote sensing are enabling automatic, high resolution, and non-destructive survey of agriculture fields, providing the key basis for advancing plant breeding. Among the used remote sensing modalities, LiDAR has attracted wide attention for its ability to directly provide accurate 3D information. Despite the increasing utilization of LiDAR technology in phenotyping, there is still a lack of effective quality control strategies, in particular, quality control of LiDAR data collected on a multi-temporal basis. This study proposes a targetless framework for multi-temporal LiDAR data quality control and crop characterization in mechanized agricultural fields. Features extracted from the fields – terrain patches and row/alley locations – are utilized for evaluating the vertical and planimetric relative accuracy of the point clouds. Row/alley locations in the field are automatically identified from the point clouds based on the assumption that higher point density and/or higher elevation correspond to plant locations. The performance of the proposed quality control strategies is evaluated using multi-temporal datasets collected in agricultural fields of different sizes, orientation, crops, and growth stages. The result shows that the net vertical and planimetric discrepancies between multi-temporal point clouds are ±3 cm and ±8 cm, respectively. While the former reflects the actual accuracy of the point clouds, the latter is a combined effect of the LiDAR point cloud accuracy, rasterization artifacts, crop type, growth pattern, and wind condition during data acquisition. In terms of row and alley detection, the result shows that the proposed strategy achieves high performance and can deal with different planting orientation, crop types, growth stages, canopy cover, and planting density. In conclusion, this study presents a quality control framework for multi-temporal LiDAR data. Finally, the row and alley detection leads to automated extraction of plots, and hence facilitates the use of remotely sensed data for automated phenotyping.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

TROPOMI observations allow for robust exploration of the relationship between solar-induced chlorophyll fluorescence and terrestrial gross primary production

Solar-induced chlorophyll fluorescence (SIF) observed by satellites has advanced the monitoring of terrestrial photosynthesis regionally and globally. The relationship between SIF and gross primary production (GPP) at leaf, canopy, and ecosystem scales has received tremendous attention in recent years. It remains controversial whether the SIF-GPP relationship at the ecosystem scale is universal or dependent upon vegetation type. New SIF observations from the TROPOspheric Monitoring Instrument (TROPOMI) with unprecedented high spatial and temporal resolution provide a new opportunity to elucidate the SIF-GPP relationship. Here, we examine the SIF-GPP relationship for seven major vegetation types across the U.S. with TROPOMI SIF and in-situ GPP data for 83 eddy covariance flux sites. We find that TROPOMI SIF shows a strong and consistent relationship with tower-based GPP at both satellite footprint and grid-cell levels. The slope of the SIF-GPP relationship is similar among all the vegetation types except croplands, demonstrating a nearly universal (converging to ~13.5 g C m -2 d -1 /W m -2 μm -1 sr -1) rather than vegetation type-specific SIF-GPP relationship. This confirms that TROPOMI SIF can be used as a proxy for GPP across a wide variety of vegetation types and can also be used to quantify GPP by avoiding uncertainty associated with land cover maps. The C 4 crops have a much higher slope than the C 3 crops, and therefore croplands tend to have a higher slope than C 3 -dominated vegetation types (e.g., forests, shrublands, savannas). We also find that the TROPOMI SIF is well correlated with GPP under normal or wetter conditions, while their relationship becomes weaker under water stress. In conclusion, our TROPOMI-based study could improve our understanding of the SIF-GPP relationship at the ecosystem scale and advance the mapping of GPP globally with SIF observations from space.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

An adaptive synchronous extraction (ASE) method for estimating intensity and footprint of surface urban heat islands: A case study of 254 North American cities

The urban heat island (UHI) effect has attracted great attention due to its potential impacts on rapidly growing urban areas. Using remotely sensed estimates of land surface temperature (LST), a large number of studies have focused on the surface UHI (SUHI) effect, which can be characterized by its two fundamental properties: intensity and footprint. The SUHI intensity reflects the LST difference between the urban area and the background reference area (BRA), and the SUHI footprint indicates the spatial extent influenced by the heat island. Currently, numerous methods have been developed to estimate the SUHI intensity and footprint, but are still greatly challenged by three main issues. Namely, the discrepancy in BRA selection criterion brings great uncertainty to the estimated SUHI intensity, the estimation of SUHI footprint is largely constrained by the predefined models, and the quantification of SUHI effect is potentially influenced by several confounding factors. Here, we proposed an adaptive synchronous extraction (ASE) method, which is capable of adaptively selecting the most optimal BRA while removing the influence of confounding factors, and achieving synchronous estimation of SUHI intensity and footprint. We applied the ASE method to 254 North American cities and conducted an in-depth comparative analysis to discuss its applicability and benefits. The main results include: (1) The ASE method avoids the limitations of existing methods in BRA selection and model presetting, and shows resilience to parameter variations. This makes the ASE method highly applicable to quantify the SUHI intensity and footprint in cities with various thermal characteristics. (2) The ASE method can better highlight the spatial, seasonal and day-night contrasts in the estimated SUHI intensity. This superiority is particularly evident when comparing it to methods based on the equal-area buffer or the simplified urban-extent algorithm. (3) Confounding factors pose non-negligible impacts on the quantification of the SUHI effect. Typically, ignoring the influence of topographic relief or missing LST data can lead to an overall overestimation of the SUHI intensity, while not removing surrounding urban areas will cause some underestimation of the SUHI intensity. In conclusion, overall, the proposed ASE method provides a new generalizable tool for quantifying the SUHI effect, which has great potentials for future studies and urban climate assessments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Combining geometric-optical and spectral invariants theories for modeling canopy fluorescence anisotropy

The spectral invariants theory ( p -theory) has received much attention in the field of quantitative remote sensing over the past few decades and has been adopted for modeling of canopy solar-induced chlorophyll fluorescence (SIF). However, the spectral invariant properties (SIP) in simple analytical formulae have not been applied for modeling canopy fluorescence anisotropy primarily because they are parameterized in terms of leaf total scattering, which precludes the differentiation between forward and backward leaf SIF emissions. In this study, we have developed the canopy-SIP SIF model by combining geometric-optical (GO) theory to account for asymmetric leaf SIF forward and backward emissions at the first-order scattering and by modeling multiple scattering based on the p-theory, thus avoiding the dependence on radiative transfer models. The applicability of the model simulations especially over 3D heterogeneous canopies was improved by incorporating canopy structure through multi-angular clumping index, and by modeling single scattering from the four components of the scene in view according to the GO approach. The results show good consistency with both the state-of-the-art SIF models and multi-angular field SIF observations over grass and chickpea canopies. Further, the coefficient of determination (R²) between the simulated SIF and field measurements was 0.75 (red) and 0.74 (far-red) for chickpea, and 0.65 (both red and far-red) for grass. The average relative error was approximately 3% for 1D homogeneous scenes when comparing the canopy-SIP SIF model simulations to the SCOPE model simulations, and around 4% for the 3D heterogeneous scene when comparing to the LESS model simulations. The results indicate that the proposed approach for separating asymmetric leaf SIF emissions is a robust way to keep a balance between satisfactory simulation accuracy and efficiency. Model simulations suggest that neglecting the leaf SIF asymmetry can lead to an underestimation of canopy red SIF by 6.3% to 42.6% for various leaf biochemical and canopy structural parameters. This study presents a simple but efficient analytical approach for canopy fluorescence modeling, with potential for large-scale canopy fluorescence simulations.

3D heterogeneous structure↗
DOE OSTI2020

How do the research and public communities view biofuel development?

Understanding how public and research view biofuel development, especially the unsynchronized views, can explain the gaps between the actual biofuel production and consumption and the government mandates in the US. Applying a comparative text mining technique, these views are explored using 9924 news articles and 57,849 research abstracts. It is found both the public and research communities respond actively to major policy and incentive programs and market conditions and the public has been closely following important research advances. However, research and practice should be coordinated to achieve economies of scale for regular and alternative biofuels. Priority is particularly needed for policy research to support legislation and enforcement and remove technical barriers to commercialization; meanwhile, greater attention is needed to prompt the commercialization of mature technologies. In addition, sentiment analysis shows positive public perceptions in general and negative perceptions primarily stemming from fraud in biofuel tax-credit programs with minor concerns on unintended negative impacts of biofuel development and policy implementation issues. This study contributes to methodology by using cutting-edge text-mining techniques to the largest and most up-to-date datasets of public news articles and research publication abstracts so as to compare public and academic views on biofuel development. As a result, this study also contributes to knowledge discovery by providing new perspectives on biofuel development, which will support policy design and identify future research directions.

09 BIOMASS FUELS↗
DOE OSTI2023

A systematic review of building energy sufficiency towards energy and climate targets

Among the sufficiency, efficiency, and renewable frameworks for reducing energy use and energy-related carbon emissions, Building Energy Sufficiency (BES) is gaining attention from policy makers and engineers. Despite the significant role of the building sector in the success of national energy and climate plans, there is a lack of research on the drivers, technologies, and effective policy instruments required to achieve BES in the building operational phase. To fill this gap, this study presents a systematic review of the definition and paradigm of BES and concludes that BES should address both occupant demand and energy or emissions requirements simultaneously. The characteristics of occupant demand in building services are divided into four dimensions: time and space, quality and quantity, control and adjustment, and flexibility. Technical options regarding the building architecture, the envelope system, and the building energy system are reviewed. Finally, policy implications and recommendations are discussed. As a result, the multiple benefits and multidisciplinary nature of BES justify further research and accelerated policy implementation in developed and developing countries.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Desiccants enabling energy-efficient buildings: A review

Buildings account for about 39% of the total energy consumption in the United States. Developing highly energy-efficient and environmentally friendly systems that are either actively or passively integrated into buildings plays a crucial role in decarbonizing the building sector. Among various technologies, desiccant-based energy systems have received particular attention in recent years due to their unique advantages, such as being thermally driven using low-grade waste or solar energies and being reliable over a wide range of operating ranges. Extensive research efforts have been exerted on desiccant-enabled technologies at both material and system levels aiming to increase their performance and achieve high technological readiness levels. The present review paper comprehensively discusses research works made at the system level. It overviews desiccant-based air conditioning systems, desiccant-based humidity pumps, desiccant-based thermal energy storage systems, and desiccant-based appliances. The study identifies challenges and opportunities to accelerate the commercialization of desiccant-enabled technologies. It is found that desiccant materials offer great promise to improve energy efficiency and functionality of future buildings through decoupling the latent and sensible cooling loads in air conditioning systems, humidity pumps integrated into building facades, and next-generation appliances. However, commercial viability and widespread acceptance of desiccant-based systems have been hampered by several major obstacles, including liquid and air flow mal-distribution and inferior thermo-physical properties of desiccant materials resulting in low ab/adsorption and regeneration rates and bulky/costly systems.

25 ENERGY STORAGE↗
DOE OSTI2023

Reserve and energy scarcity pricing in United States power markets: A comparative review of principles and practices

Here, errors in forecasting load and renewable-based generation in restructured power systems mean that independent system operators (ISOs) must procure sufficient operating reserves to keep the real-time operation of the system reliable and secure. But when procured reserves turn out to be insufficient in real-time due to the lack of resource capacity or ramp capability, operators often set higher prices for reserves and energy to encourage more supply, and to motivate consumers to decrease usage or shift it to other times. This procedure, which is called scarcity or shortage pricing, is a core feature of U.S. electricity markets. It is receiving increased attention from market designers and stakeholders because scarcity will become more important for spot price formation in the future with the increased penetration of zero-marginal cost renewables, and the shrinking role of fuel costs in setting prices. Scarcity pricing is implemented in various ways by different ISOs. These differences have practical implications for the level of prices and incentives for investment, operations, and demand modification. In this paper, general approaches and specific calculation procedures for reserve and energy scarcity pricing practices and calculations across the seven ISO-based U.S. power markets are reviewed and compared. A consistent terminology is used to facilitate the comparison. Current scarcity pricing practices are grouped into three approaches: (1) imposing an adder after the spot market is run; (2) including stepwise demand curves within market clearing procedures for non-contingency reserve products (e.g., the novel flexiramp product), which tends to yield longer right tails for energy scarcity premium curves; and (3) having stepwise demand curves for traditional contingency reserve products only, which results in shorter right tails in energy scarcity curves. A generic numerical example is presented to highlight the large practical differences among the reserve scarcity pricing approaches and specific implementations. To further investigate factors that contribute the most to demand curves differences among ISOs, a sensitivity analysis is performed. This analysis shows that the largest source of differences among the curves is the scarcity prices assumed in the case of severe scarcity, while the number of steps used and whether flexiramp is considered also yields important differences in scarcity prices. As renewable penetration increases, it will become increasingly crucial to employ administrative demand curves so that spot prices more effectively motivate supply and demand adjustments exactly when and where they are needed. This study shows that the different assumptions yield very different scarcity premiums for reserves and energy, and are likely to provide divergent incentives for resources to respond to shortages. It is concluded that to promote market efficiency, a reserve shortage demand curve should have at least three features: inclusion of the marginal value of reserve products at each shortage level, consideration of the magnitude and probability of supply contingencies, and avoidance of abrupt price discontinuities that can cause excessively volatile market outcomes.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2026

Uncertain quantum computing futures and potential energy and physical resource impacts at scale

Considerable attention has recently focused on the vast energy and water demands of supercomputing, namely large-scale data centers that underpin artificial intelligence (AI), one of the great disruptors of contemporary society. Looking ahead some years from now, quantum computing is poised to disrupt established computing paradigms once again. Scientists and engineers are now working intensely to bring this century-old dream of physicists to fruition. Yet, as quantum computers begin to be integrated with classical supercomputing architectures, the implications for energy and physical resource use also need to be understood, especially how they compare to today’s AI data centers. These impacts have not yet been quantified by the research community – a notable gap in the literature, even if commercial-scale deployment of Quantum-Accelerated Computing Infrastructure (QuACI) is not expected for a few more years. This study is the first to conduct such an assessment. Using publicly available information from academic sources and private industry, we characterize multiple configurations of superconducting qubit-based, fault-tolerant quantum computers (FTQC) that could plausibly be deployed at scale in the 2030s and into the 2040s. By parameterizing these FTQC systems at a process level, we conduct a prospective scenario analysis to quantify their energy and physical resource needs. While these estimates are uncertain, given the current state of quantum technologies and their unknown future trajectories, important insights can already be drawn. One key finding is that while the electricity needs for a fleet of FTQCs are within the bounds of previous modeling studies that have explored high electricity demand futures, the needs for certain physical resources, namely water and helium-3, could pose bottlenecks to QuACI scale-up.

Computing↗
DOE OSTI2025

Porous carbon from lignocellulosic biomass with emphasis on corn plant waste residue for energy storage

The rising global demand for sustainable energy storage materials has driven the search for environmentally friendly and cost-effective electrode options. Hydrothermal conversion of lignocellulosic biomass has gained attention due to its low energy requirements and operation at relatively low temperatures, presenting a green alternative to traditional thermochemical methods. The resulting solid product, hydrochar, has been used as an adsorbent and soil amendment; however, chemical/thermal treatment significantly enhances its physical properties. These structural modifications transform hydrochar into an effective porous carbon electrode, offering abundant sites for electrolyte ion transport, critical for high-performance devices like supercapacitors and batteries. This review first discusses various waste biomass and sustainable feedstocks available globally. It compares two primary thermochemical conversion techniques, pyrolysis and hydrothermal carbonization/liquefaction, and examines their respective solid products, biochar and hydrochar, analyzing differences in their physical and chemical characteristics. The focus is placed on hydrochar, summarizing activation methods to produce porous carbon suitable for energy storage applications. Additionally, this review will include a dedicated section on the application of porous carbon derived from corn plant waste residue, considering that corn is one of the most abundant crops grown worldwide, which makes it an important and promising source for sustainable porous carbon production. The role of machine learning models in optimizing hydrothermal processes to produce high-quality hydrochar is also discussed, emphasizing how data-driven approaches can streamline process development. Finally, the review identifies the current challenges and prospects for lignocellulosic biomass-derived porous carbon as a sustainable electrode material in next-generation energy storage technologies.

25 ENERGY STORAGE↗
DOE OSTI2022

Titanium doped kagome superconductor CsV 3–x Ti x Sb 5 and two distinct phases

The vanadium-based kagome superconductor CsV 3 Sb 5 has attracted tremendous attention due to its unexcepted anomalous Hall effect (AHE), charge density waves (CDWs), nematicity, and a pseudogap pair density wave (PDW) coexisting with unconventional strong-coupling superconductivity. The origins of CDWs, unconventional superconductivity, and their correlation with different electronic states in this kagome system are of great significance, but so far, are still under debate. Chemical doping in the kagome layer provides one of the most direct ways to reveal the intrinsic physics, but remains unexplored. Here, we report, for the first time, the synthesis of Ti-substituted CsV 3 Sb 5 single crystals and its rich phase diagram mapping the evolution of intertwining electronic states. The Ti atoms directly substitute for V in the kagome layers. CsV 3–x Ti x Sb 5 shows two distinct superconductivity phases upon substitution. The Ti slightly-substituted phase displays an unconventional V-shaped superconductivity gap, coexisting with weakening CDW, PDW, AHE, and nematicity. The Ti highly-substituted phase has a U-shaped superconductivity gap concomitant with a short-range rotation symmetry breaking CDW, while long-range CDW, twofold symmetry of in-plane resistivity, AHE, and PDW are absent. Furthermore, we also demonstrate the chemical substitution of V atoms with other elements such as Cr and Nb, showing a different modulation on the superconductivity phases and CDWs. These findings open up a way to synthesise a new family of doped CsV 3 Sb 5 materials, and further represent a new platform for tuning the different correlated electronic states and superconducting pairing in kagome superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗