Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,423 records · Page 79

Fabrication-tolerant 1310 nm laterally-coupled distributed feedback lasers with high side mode suppression ratios

A laterally-coupled distributed feedback (LC-DFB) laser was designed and fabricated using stepper lithography. Such DFB lasers eliminate the need of the commonly required re-growth steps in a conventional DFB laser fabrication process. With LC-DFB lasers, the grating can be lithographically patterned out of the ridge waveguide. High order gratings can enhance the lithographic tolerance for lower resolution patterning, yielding lasers more amenable to mass-manufacturing. 1310 nm InGaAsP/InP LC-DFB laser with third-order gratings was fabricated using i-line 5x stepper lithography. Excellent side mode suppression ratio over 52 dB has been measured with a single mode lasing around 1310 nm.

36 MATERIALS SCIENCE↗

Growth kinetics in position-controlled and catalyst-free InAs nanowire arrays on Si(111) grown by selective area molecular beam epitaxy

We investigated the interwire distance dependence on the growth kinetics of vertical, high-yield InAs nanowire arrays on Si(111) grown by catalyst-free selective area molecular beam epitaxy (MBE). Utilizing lithographically defined SiO{sub 2} nanomasks on Si(111) with regular hole patterns, catalyst-free and site-selective growth of vertically (111)-oriented InAs nanowires was achieved with very high yields of {approx}90 percent. Interestingly, the yield of vertically ordered nanowires was independent of the interwire distance and the initial growth stages. Significant size variation in the nanowires was found to depend critically on the interwire distance and growth time. Two growth regimes were identified--(i) a competitive growth regime with shorter and thinner nanowires for narrow interwire distances and (ii) a diffusion-limited growth regime for wider distances, providing good estimates for the surface diffusion lengths. Surprisingly, despite these size-dependent effects the nanowire geometries remained unaltered with uniform, almost nontapered morphologies even over large variation in nanowire density ({approx}mid-10{sup 6}-10{sup 9} cm{sup -2} range). X-ray diffraction further confirmed the vertical (111) directionality with low crystal tilt by rocking curve widths ({omega} scans) as low as {approx}0.6 deg. These findings demonstrate the capability to precisely tailor the position and size of well-oriented III-V semiconductor nanowires through noncatalytic MBE selective area growth and provide an important step toward fully integrated, uniform vertical III-V nanowire array-on-Si devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Origin of ferromagnetism in self-assembled Ga{sub 1-x}Mn{sub x}As quantum dots grown on Si

Self-assembled Ga{sub 1-x}Mn{sub x}As magnetic semiconductor quantum dots have been grown on Si (001) substrates using droplet epitaxy by molecular-beam epitaxy. Structural characterization reveals that these dots possess a zinc-blende lattice. The Ga{sub 1-x}Mn{sub x}As quantum dots with 8% Mn content are ferromagnetically soft and slightly anisotropic at low temperature, and show the superparamagnetic behavior with a blocking temperature of 20 K in the in-plane direction. Moreover, the results of x-ray absorption near edge structure provide direct evidences for the substitutional Mn{sup 2+} ion with a half-filled d{sup 5} configuration for the Ga site, suggesting the hole-mediated ferromagnetism in zero-dimensional Ga{sub 1-x}Mn{sub x}As quantum dots.

36 MATERIALS SCIENCE↗

Structural and Optical Properties Studies Of Ar{sup 2+} Ion Implanted Mn Deposited GaAs

Mn thin film deposited GaAs samples were implanted with 250 keV Ar{sup +2} ions for various fluences 5x10{sup 15}, 1x10{sup 16} and 5x10{sup 16} ions cm{sup -2}. Optical and structural properties of the samples have been investigated by using ultraviolet spectroscopy and X-ray diffraction techniques. Optical absorbance of the implanted samples was found to decrease with increase in argon ion fluence. XRD spectra of the samples implanted for ion fluences 5x10{sup 15} and 1x10{sup 16} showed the formation of (GaMn)As at 2{theta} value of 65.34 deg. The XRD spectrum of sample 1x10{sup 16} cm{sup -2} annealed at 450 deg. C showed the formation of magnetic phases.

36 MATERIALS SCIENCE↗

Tetragonal To Collapsed Tetragonal Phase Transition In BaFe{sub 2}As{sub 2} and CaFe{sub 2}As{sub 2}

Superconductivity in MFe{sub 2}As{sub 2} (M = Ba, Ca) compounds appears either at a critical doping level at ambient pressure or in the parent compound itself by application of pressure above a critical value. We report high pressure powder x-ray diffractions studies for these compounds at 300 K up to about 56 GPa using membrane diamond anvil cells. The measurements for BaFe{sub 2}As{sub 2} show a new tetragonal to collapsed tetragonal phase transition at about 22 GPa that remains stable upto 56 GPa. CaFe{sub 2}As{sub 2} is already known to transform to collapsed phase at 1.7 GPa at 300 K. Our measurements on CaFe{sub 2}As{sub 2} do not show any post collapsed phase transition on increase of pressure 50 GPa at 300 K. It is important to note that the transition in both compounds occurs when they are compressed to almost the same value of the unit cell volume and attain similar c{sub t}/a{sub t} ratios. We present a detailed analysis of the pressure dependence and structure phase transitions as well as equation of state in these important FeAs compounds that should be useful in the context of possible superconductivity in the collapsed phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coherent heteroepitaxy of Bi{sub 2}Se{sub 3} on GaAs (111)B

We report the heteroepitaxy of single crystal thin films of Bi{sub 2}Se{sub 3} on the (111)B surface of GaAs by molecular beam epitaxy. We find that Bi{sub 2}Se{sub 3} grows highly c-axis oriented, with an atomically sharp interface with the GaAs substrate. By optimizing the growth of a very thin GaAs buffer layer before growing the Bi{sub 2}Se{sub 3}, we demonstrate the growth of thin films with atomically flat terraces over hundreds of nanometers. Initial time-resolved Kerr rotation measurements herald opportunities for probing coherent spin dynamics at the interface between a candidate topological insulator and a large class of GaAs-based heterostructures.

36 MATERIALS SCIENCE↗

Defect engineering in GaAs using high energy light ion irradiation: Role of electronic energy loss

We report on the application of high energy light ions (Li and O) irradiation for modification of defects, in particular, for annihilation of point defects using electronic energy loss in GaAs to minimize the defects produced by nuclear collisions. The high resolution x-ray diffraction and micro-Raman spectroscopy have been used to monitor that no lattice damage or amorphization take place due to irradiating ions. The effects of irradiation on defects and their energy levels have been studied using thermally stimulated current spectroscopy. It has been observed that till an optimum irradiation fluence of 10{sup 13} ions/cm{sup 2} there is annihilation of native defects but further increase in irradiation fluence results in accumulation of defects, which scales with the nuclear energy loss process, indicating that the rate of defects produced by the binary collision process exceeds rate of defect annihilation. Defect annihilation due to electronic energy loss has been discussed on the basis of breaking of bonds and enhanced diffusivity of ionized native defects.

36 MATERIALS SCIENCE↗

Magnetic anisotropy in (Ga,Mn)As grown on vicinal GaAs: Effects of the orientation of microwave magnetic field

Ferromagnetic resonance (FMR) study of the magnetic anisotropy in epitaxial (Ga,Mn)As grown on vicinal GaAs is presented. The data collected in the growth plane reveal very limited dependence on the miscut angle {eta}, with a negligible effect of {eta} on the in-plane uniaxial anisotropy. In the out-of-plane configuration, the substrate misorientation has a pronounced influence on FMR, which features are partially explained with a phenomenological treatment of the atomic step-induced anisotropy. This simple model, however, does not account for the miscut-induced dependence of FMR on the orientation of microwave magnetic field, that is observed with the static field applied invariably along the growth direction.

36 MATERIALS SCIENCE↗

Effects of Ti incorporation on the interface properties and band alignment of HfTaO{sub x} thin films on sulfur passivated GaAs

Thin HfTaO{sub x} and HfTaTiO{sub x} gate dielectrics ({approx}7-8 nm) have been rf sputter-deposited on sulfur passivated GaAs. Our experimental results suggest that the formation of Ga-O at GaAs surface and As diffusion in dielectric may be effectively controlled by Ti incorporation. Possibility of tailoring of band alignment via Ti incorporation is shown. Valence band offsets of 2.6{+-}0.05 and 2.68{+-}0.05 eV and conduction-band offsets of 1.43{+-}0.05 and 1.05{+-}0.05 eV were found for HfTaO{sub x} (E{sub g{approx}}5.45 eV) and HfTaTiO{sub x} (E{sub g{approx}}5.15 eV), respectively.

36 MATERIALS SCIENCE↗

Preparation and characterization of Co single-crystal thin films with hcp, fcc and bcc structures

Co crystals with three different structures are realized in the form of single-crystal thin films hetero-epitaxially grown on single-crystal substrates by ultrahigh vacuum rf magnetron sputtering. hcp-, fcc-, and bcc-Co single-crystal films are formed on Cr(211){sub bcc}, Cu(100){sub fcc}, and GaAs(110){sub B3}, respectively. The film growth process is studied by RHEED, and the lattice constants of these Co films are determined by x-ray diffraction. The magnetization properties of these thin films are reflecting the magnetocrystalline anisotropies of Co crystals with the easy magnetization axes along hcp<0001>, fcc<111>, and bcc<100> directions.

36 MATERIALS SCIENCE↗

Molecular beam epitaxial growth of metamorphic AlInSb/GaInSb high-electron-mobility-transistor structures on GaAs substrates for low power and high frequency applications

We report on molecular beam epitaxial growth of AlInSb/GaInSb metamorphic high-electron-mobility-transistor structures for low power, high frequency applications on 4 in. GaAs substrates. The structures consist of a Ga{sub 0.4}In{sub 0.6}Sb channel embedded in Al{sub 0.4}In{sub 0.6}Sb barrier layers which are grown on top of an insulating metamorphic buffer, which is based on the linear exchange of Ga versus In and a subsequent exchange of As versus Sb. Precise control of group V fluxes and substrate temperature in the Al{sub 0.4}In{sub 0.6}As{sub 1-x}Sb{sub x} buffer is essential to achieve high quality device structures. Good morphological properties were achieved demonstrated by the appearance of crosshatching and root mean square roughness values of 2.0 nm. Buffer isolation is found to be >100 k{Omega}/{open_square} for optimized growth conditions. Hall measurements at room temperature reveal electron densities of 2.8x10{sup 12} cm{sup -2} in the channel at mobility values of 21.000 cm{sup 2}/V s for single-sided Te volume doping and 5.4x10{sup 12} cm{sup -2} and 17.000 cm{sup 2}/V s for double-sided Te {delta}-doping, respectively.

36 MATERIALS SCIENCE↗

Air-gap heterostructures

We demonstrate the fabrication of thin GaAs layers which quasi hover above the underlying GaAs substrate. The hovering layers have a perfect epitaxial relationship to the substrate crystal lattice and are connected to the substrate surface only by lattice matched nanopillars of low density. These air-gap heterostructures are created by combining in situ molecular beam epitaxy compatible self-assembled droplet-etching and ex situ selective wet-chemical etching.

36 MATERIALS SCIENCE↗

The effect of interelement dipole coupling in patterned ultrathin single crystal Fe square arrays

The correlation between the magnetic properties and the interelement separation in patterned arrays of ultrathin single crystal Fe films of 12 monolayers (ML) grown on GaAs(100) has been studied. The critical condition to form single domain remanent states in the square elements was found to be 10 {mu}m in size and 20 {mu}m for the interelement separation. The coercivity was also found to increase with the increasing interelement separation in the patterned arrays. These results are attributed to the competition between the large in-plane uniaxial anisotropy, the demagnetizing field, and interelement dipole coupling as determined semiqualitatively by the ferromagnetic resonance measurements.

36 MATERIALS SCIENCE↗

Ion Beam Neutralization Using FEAs and Mirror Magnetic Fields

Advanced implantation systems used for semiconductor processing require transportation of ion beams which are quasi-parallel and have low energy, such as ({sup 11}B{sup +},{sup 31}P{sup +},{sup 75}As{sup +}) with energy in the range E{sub ion} 200-1000 eV. Compensation of ion beam divergence may be obtained through electron injection and confinement in regions of non-uniform magnetic fields. Field emitter arrays with special properties are used as electron sources. The present study shows that electron confinement takes place in regions of gradient magnetic field, such as nearby analyzing, collimator and final energy magnets of the ion beam line. Modeling results have been obtained using Opera3D/Tosca/Scala. In regions of gradient magnetic field, electrons have helical trajectories which are confined like a cloud inside curved 'magnetic bottles'. An optimal range of positions with respect to the magnet for placing electron sources in gradient magnetic field has been shown to exist.

43 PARTICLE ACCELERATORS↗

Suppression of Divergence of Low Energy Ion Beams by Space Charge Neutralization with Low Energy Electrons Emitted from Field Emitter Arrays

Suppression of divergence of low energy neon ion beam was experimentally demonstrated by neutralizing the space charge of ion beam with low energy electrons emitted from silicon field emitter arrays (Si-FEAs). Treatment of the FEAs with trifluoromethane plasma realized surface carbonization which was efficient to elongate the lifetime of the FEA and to improve the electron energy distribution. Together with the improvement of the performance of Si-FEA, we have developed a novel electron deceleration system to produce low energy electrons. A low energy neon ion beam was produced and the beam property was investigated with and without the electron supply from surface carbonized Si-FEA (Si:C-FEA). As a result, the divergence of the neon ion beam was largely suppressed with presence of the electrons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Perpendicular ferrimagnetism in strained Mn{sub 2}As film

Ferrimagnetic Mn{sub 2}As thin films with perpendicular magnetic anisotropy were successfully grown on Si(100) by molecular-beam epitaxy. From the reflection high-energy electron diffraction and X-ray diffraction patterns, the orientation of the Mn{sub 2}As film on Si was along the c-axis in the tetragonal crystal structure. Mn{sub 2}As film exhibited ferrimagnetic ordering at temperatures greater than 300 K, which differs from antiferromagnetic or paramagnetic behaviors in the bulk form. The magnetic moment of Mn{sub 2}As determined by saturated magnetization was 0.51 {mu}{sub B} per unit cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of trimethylaluminum on the growth and properties of HfO{sub 2}/In{sub 0.53}Ga{sub 0.47}As interfaces

The growth and the electrical properties of HfO{sub 2}/In{sub 0.53}Ga{sub 0.47}As interfaces are characterized as a function of exposure to trimethylaluminum (TMA) prior to chemical beam deposition of HfO{sub 2} from an alkoxide precursor. It is shown that TMA can act as a surfactant for HfO{sub 2} growth for (2x4) but not for the group-III-rich (4x2) reconstructed surfaces. The Fermi-level can be unpinned by postdeposition forming gas anneals only for interfaces that were exposed to low doses of TMA at low temperatures. The results are discussed in the context of the interaction between TMA and III-V surfaces.

36 MATERIALS SCIENCE↗

Magnetization reversal processes of epitaxial Fe{sub 3}Si films on GaAs(001)

We report magneto-optical Kerr microscopy study of the magnetic reversal behavior of Fe{sub 3}Si/GaAs(100) epitaxial thin films grown by molecular beam epitaxy. Results are described in the context of superconducting quantum interference device and Kerr effect vector magnetometry to study the magnetic switching behavior. By tuning the Fe concentration of the samples from 75% to 83%, we found that the ratio of uniaxial to cubic anisotropy constants {gamma} (=|K{sub u}/K{sub 1}|) would tremendously vary from 0.06 to 0.3. When the field was applied along the easy axis of Fe{sub 3}Si samples, a step feature was observed in the M-H loops. This feature has been resolved in the domain image by Kerr microscopy, in which we observed a two-switching behavior at the field where the step feature occurred. These can be qualitatively understood by considering the ratio {gamma}.

36 MATERIALS SCIENCE↗