Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “unknown unknowns”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Location of largest earthquake slip and fast rupture controlled by along-strike change in fault structural maturity due to fault growth

Earthquake slip distributions are asymmetric along strike, but the reasons for the asymmetry are unknown. We address this question by establishing empirical relations between earthquake slip profiles and fault properties. We analyze the slip distributions of 27 large continental earthquakes in the context of available information on their causative faults, in particular on the directions of their long-term lengthening. We find that the largest slips during each earthquake systematically occurred on that half of the ruptured fault sections most distant from the long-term fault propagating tips, i.e., on the most mature half of the broken fault sections. Meanwhile, slip decreased linearly over most of the rupture length in the direction of long-term fault propagation, i.e., of decreasing structural maturity along strike. We suggest that this earthquake slip asymmetry is governed by along-strike changes in fault properties, including fault zone compliance and fault strength, induced by the evolution of off-fault damage, fault segmentation, and fault planarity with increasing structural maturity. We also find higher rupture speeds in more mature rupture sections, consistent with predicted effects of low-velocity damage zones on rupture dynamics. Since the direction(s) of long-term fault propagation can be determined from geological evidence, it might be possible to anticipate in which direction earthquake slip, once nucleated, may increase, accelerate, and possibly lead to a large earthquake. Finally, our results could thus contribute to earthquake hazard assessment and Earthquake Early Warning.

58 GEOSCIENCES↗

Ammonia and methane dairy emissions in the San Joaquin Valley of California from individual feedlot to regional scale

Agricultural ammonia (NH 3 ) emissions are highly uncertain, with high spatiotemporal variability and a lack of widespread in situ measurements. Regional NH 3 emission estimates using mass balance or emission ratio approaches are uncertain due to variable NH 3 sources and sinks as well as unknown plume correlations with other dairy source tracers. We characterize the spatial distributions of NH 3 and methane (CH 4 ) dairy plumes using in situ surface and airborne measurements in the Tulare dairy feedlot region of the San Joaquin Valley, California, during the NASA Deriving Information on Surface conditions from Column and Vertically Resolved Observations Relevant to Air Quality 2013 field campaign. Surface NH 3 and CH 4 mixing ratios exhibit large variability with maxima localized downwind of individual dairy feedlots. The geometric mean NH 3 :CH 4 enhancement ratio derived from surface measurements is 0.15 ± 0.03 ppmv ppmv –1 . Individual dairy feedlots with spatially distinct NH 3 and CH 4 source pathways led to statistically significant correlations between NH 3 and CH 4 in 68% of the 69 downwind plumes sampled. At longer sampling distances, the NH 3 :CH 4 enhancement ratio decreases 20–30%, suggesting the potential for NH 3 deposition as a loss term for plumes within a few kilometers downwind of feedlots. Aircraft boundary layer transect measurements directly above surface mobile measurements in the dairy region show comparable gradients and geometric mean enhancement ratios within measurement uncertainties, even when including NH 3 partitioning to submicron particles. Individual NH 3 and CH 4 plumes sampled at close proximity where losses are minimal are not necessarily correlated due to lack of mixing and distinct source pathways. As a result, our analyses have important implications for constraining NH 3 sink and plume variability influences on regional NH 3 emission estimates and for improving NH 3 emission inventory spatial allocations.

54 ENVIRONMENTAL SCIENCES↗

The compressed state Kalman filter for nonlinear state estimation: Application to large-scale reservoir monitoring

Reservoir monitoring aims to provide snapshots of reservoir conditions and their uncertainties to assist operation management and risk analysis. These snapshots may contain millions of state variables, e.g., pressures and saturations, which can be estimated by assimilating data in real time using the Kalman filter (KF). However, the KF has a computational cost that scales quadratically with the number of unknowns, m, due to the cost of computing and storing the covariance and Jacobian matrices, along with their prod-ucts. The compressed state Kalman filter (CSKF) adapts the KF for solving large-scale monitoring problems. The CSKF uses N preselected orthogonal bases to compute an accurate rank-N approximation of the covari-ance that is close to the optimal spectral approximation given by SVD. The CSKF has a computational cost that scales linearly in m and uses an efficient matrix-free approach that propagates uncertainties using N + 1 forward model evaluations, where N << m. Here in this paper we present a generalized CSKF algorithm for nonlin-ear state estimation problems such as CO 2 monitoring. For simultaneous estimation of multiple types of state variables, the algorithm allows selecting bases that represent the variability of each state type. Through synthetic numerical experiments of CO 2 monitoring, we show that the CSKF can reproduce the Kal-man gain accurately even for large compression ratios (m/N). For a given computational cost, the CSKF uses a robust and flexible compression scheme that gives more reliable uncertainty estimates than the ensemble Kalman filter, which may display loss of ensemble variability leading to suboptimal uncertainty estimates.

97 MATHEMATICS AND COMPUTING↗

Scalable subsurface inverse modeling of huge data sets with an application to tracer concentration breakthrough data from magnetic resonance imaging

When characterizing subsurface properties is crucial for reliable and cost-effective groundwater supply management and contaminant remediation. With recent advances in sensor technology, large volumes of hydro-geophysical and geochemical data can be obtained to achieve high-resolution images of subsurface properties. However, characterization with such a large amount of information requires prohibitive computational costs associated with “big data” processing and numerous large-scale numerical simulations. To tackle such difficulties, the Principal Component Geostatistical Approach (PCGA) has been proposed as a “Jacobian-free” inversion method that requires much smaller forward simulation runs for each iteration than the number of unknown parameters and measurements needed in the traditional inversion methods. PCGA can be conveniently linked to any multi-physics simulation software with independent parallel executions. In our paper, we extend PCGA to handle a large number of measurements (e.g. 106 or more) by constructing a fast preconditioner whose computational cost scales linearly with the data size. For illustration, we characterize the heterogeneous hydraulic conductivity (K) distribution in a laboratory-scale 3-D sand box using about 6 million transient tracer concentration measurements obtained using magnetic resonance imaging. Since each individual observation has little information on the K distribution, the data was compressed by the zero-th temporal moment of breakthrough curves, which is equivalent to the mean travel time under the experimental setting. Moreover, only about 2,000 forward simulations in total were required to obtain the best estimate with corresponding estimation uncertainty, and the estimated K field captured key patterns of the original packing design, showing the efficiency and effectiveness of the proposed method. This article is protected by copyright. All rights reserved.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Geoengineering with stratospheric aerosols: What do we not know after a decade of research?: GEOENGINEERING: WHAT DO WE NOT KNOW?

Any well-informed future decision on whether and how to deploy solar geoengineering requires balancing the impacts (both intended and unintended) of intervening in the climate against the impacts of not doing so. In spite of the tremendous progress in the last decade, the current state of knowledge remains insufficient to support an assessment of this balance, even for stratospheric aerosol geoengineering (SAG), arguably the best understood (practical) geoengineering method. We then articulate key unknowns associated with SAG, including both climate-science and design questions, as an essential step toward developing a future strategic research program that could address outstanding uncertainties.

54 ENVIRONMENTAL SCIENCES↗

Simultaneous event-specific estimates of transport, loss, and source rates for relativistic outer radiation belt electrons: Event-Specific 1-D Modeling

The most significant unknown regarding relativistic electrons in Earth’s outer Van Allen radiation belt is the relative contribution of loss, transport, and acceleration processes within the inner magnetosphere. Detangling each individual process is critical to improve the understanding of radiation belt dynamics, but determining a single component is challenging due to sparse measurements in diverse spatial and temporal regimes. However, there are currently an unprecedented number of spacecraft taking measurements that sample different regions of the inner magnetosphere. With the increasing number of varied observational platforms, system dynamics can begin to be unraveled. In this work, we employ in-situ measurements during the 13-14 January 2013 enhancement event to isolate transport, loss, and source dynamics in a one dimensional radial diffusion model. We then validate the results by comparing them to Van Allen Probes and THEMIS observations, indicating that the three terms have been accurately and individually quantified for the event. Finally, a direct comparison is performed between the model containing event-specific terms and various models containing terms parameterized by geomagnetic index. Models using a simple 3/Kp loss timescale show deviation from the event specific model of nearly two orders of magnitude within 72 hours of the enhancement event. However, models using alternative loss timescales closely resemble the event specific model.

79 ASTRONOMY AND ASTROPHYSICS↗

On the evolution of elastic properties during laboratory stick‐slip experiments spanning the transition from slow slip to dynamic rupture

Abstract The physical mechanisms governing slow earthquakes remain unknown, as does the relationship between slow and regular earthquakes. To investigate the mechanism(s) of slow earthquakes and related quasi‐dynamic modes of fault slip we performed laboratory experiments on simulated fault gouge in the double direct shear configuration. We reproduced the full spectrum of slip behavior, from slow to fast stick slip, by altering the elastic stiffness of the loading apparatus ( k ) to match the critical rheologic stiffness of fault gouge ( k c ). Our experiments show an evolution from stable sliding, when k > k c , to quasi‐dynamic transients when k ~ k c , to dynamic instabilities when k < k c . To evaluate the microphysical processes of fault weakening we monitored variations of elastic properties. We find systematic changes in P wave velocity ( V p ) for laboratory seismic cycles. During the coseismic stress drop, seismic velocity drops abruptly, consistent with observations on natural faults. In the preparatory phase preceding failure, we find that accelerated fault creep causes a V p reduction for the complete spectrum of slip behaviors. Our results suggest that the mechanics of slow and fast ruptures share key features and that they can occur on same faults, depending on frictional properties. In agreement with seismic surveys on tectonic faults our data show that their state of stress can be monitored by V p changes during the seismic cycle. The observed reduction in V p during the earthquake preparatory phase suggests that if similar mechanisms are confirmed in nature high‐resolution monitoring of fault zone properties may be a promising avenue for reliable detection of earthquake precursors.

Tinti, E.↗

Regional distribution of large blowdown patches across Amazonia in 2005 caused by a single convective squall line: Distribution of Amazonia Blowdown Damage

In mid-January 2005 a convective squall line traversed 4.5 × 10 6 km 2 of Amazonia from southwest to northeast. As seen in Landsat images, this atypical convective storm left blowdown imprints with diffuse geometry, unlike the fan-shaped wind disturbance of much more frequent east-to-west propagating squall lines. Previous work reported 0.2% of the forest area damaged by this one relatively rare event within one Landsat image and assumed similar disturbance across the entire traverse. Here, we mapped convective wind damage impact to the region in 2005 by identifying large-scale (>4 ha) blowdown imprints in 30 Landsat images. The diffuse-type imprints associated with this single squall line contributed up to 60–72% of total 2005 wind-disturbed area detected across the region, but damage was highly concentrated in central Amazonia. Consequently, the distribution of large wind damage patches in 2005 across Amazonia was very different from long-term average. In conclusion, tegional distribution of wind-driven tree mortality for smaller patch sizes remains unknown.

54 ENVIRONMENTAL SCIENCES↗

Machine Learning Predicts Laboratory Earthquakes

Here, we apply machine learning to data sets from shear laboratory experiments, with the goal of identifying hidden signals that precede earthquakes. Here we show that by listening to the acoustic signal emitted by a laboratory fault, machine learning can predict the time remaining before it fails with great accuracy. These predictions are based solely on the instantaneous physical characteristics of the acoustical signal and do not make use of its history. Surprisingly, machine learning identifies a signal emitted from the fault zone previously thought to be low-amplitude noise that enables failure forecasting throughout the laboratory quake cycle. We infer that this signal originates from continuous grain motions of the fault gouge as the fault blocks displace. We posit that applying this approach to continuous seismic data may lead to significant advances in identifying currently unknown signals, in providing new insights into fault physics, and in placing bounds on fault failure times.

58 GEOSCIENCES↗

The Response of Atlantic Tropical Cyclones to Suppression of African Easterly Waves

Atlantic tropical cyclone (TC) genesis is strongly linked with African easterly waves (AEWs) on the synoptic time scale. However, the TC–AEW relationship is unclear on interannual to climate time scales, and it is unknown whether AEWs are necessary to maintain climatological TC frequency, that is, whether TCs are limited by AEWs. We investigated the impact of AEW suppression on seasonal Atlantic TC activity using a 10–member ensemble of regional climate model simulations in which AEWs were either prescribed or removed through the lateral boundary condition. The climate model experiments produced no significant change in seasonal Atlantic TC number, indicating that AEWs are not necessary to maintain climatological basin–wide TC frequency even though TCs readily originate from these types of disturbances. This suggests that the specific type of “seedling” disturbance is unimportant for determining basin–wide seasonal Atlantic TC number and that in the absence of AEWs, TCs will generate by other mechanisms. Furthermore, the results imply that changes in the presence of AEWs may not be reliable predictors of seasonal variability and future change in Atlantic TC frequency.

58 GEOSCIENCES↗

Snowmelt‐Driven Trade‐Offs Between Early and Late Season Productivity Negatively Impact Forest Carbon Uptake During Drought

Abstract Future projections of declining snowpack and increasing potential evaporation are predicted to advance the timing of snowmelt in mountain ecosystems globally with unknown implications for snowmelt‐driven forest productivity. Accordingly, this study combined satellite‐ and tower‐based observations to investigate the forest productivity response to snowpack and potential evaporation variability between 1989 and 2012 throughout the Southern Rocky Mountain ecoregion, United States. Our results show that early and late season productivity were significantly and inversely related and that future shifts toward earlier and/or reduced snowmelt could decrease snowmelt water use efficiency and thus restrict productivity despite a longer growing season. This was explained by increasing snow aridity, which incorporated evaporative demand and snow water supply, and was modified by summer precipitation to determine total annual productivity. The combination of low snow accumulation and record high potential evaporation in 2012 resulted in the 34 year minimum ecosystem productivity that could be indicative of future conditions.

Knowles, John F.↗

Phase transition and equation of state of dense hydrous silica up to 63 GPa

Although it has previously been considered to be essentially anhydrous, Al-free stishovite can contain up to ~1.3 wt % of H 2 O, perhaps through the direct substitution (Si 4+ → 4H + ), according to recent studies. Yet the stability of such substitution and its impact on the properties of silica and rutile-structured hydrous phases (such as $δ$-AlOOH and phase H) are unknown at the conditions of the deeper mantle. We have synthesized hydrous and anhydrous Al-free stishovite samples at 723 K and 9 GPa, and 1473 K and 10 GPa, respectively. Synchrotron X-ray diffraction patterns show that the unit cell volume of hydrous stishovite is 1.3% greater than that of anhydrous stishovite at 1 bar, suggesting significant incorporation of OH in the crystal structure (3.2 ± 0.5 wt % H 2 O). At 300 K, we found a lower and broader transition pressure from rutile type to CaCl 2 type (28–42 GPa) in hydrous dense silica. We also found that hydrous silica polymorphs are more compressible than their anhydrous counterparts. After the phase transition, the unit cell volume of hydrous silica becomes the same as that of anhydrous silica, showing that the proton incorporation through a direct substitution can be further stabilized at high pressure. The lower pressure transition and the pressure stabilization of the proton incorporation in silica would provide ways to transport and store water in the lower mantle in silica-rich heterogeneities, such as subducted oceanic crust.

58 GEOSCIENCES↗

Constraining the Magmatic System at Mount St. Helens (2004-2008) Using Bayesian Inversion With Physics-Based Models Including Gas Escape and Crystallization

Physics-based models of volcanic eruptions track conduit processes as functions of depth and time. When used in inversions, these models permit integration of diverse geological and geophysical data sets to constrain important parameters of magmatic systems. We develop a 1-D steady state conduit model for effusive eruptions including equilibrium crystallization and gas transport through the conduit and compare with the quasi-steady dome growth phase of Mount St. Helens in 2005. Viscosity increase resulting from pressure-dependent crystallization leads to a natural transition from viscous flow to frictional sliding on the conduit margin. Erupted mass flux depends strongly on wall rock and magma permeabilities due to their impact on magma density. Including both lateral and vertical gas transport reveals competing effects that produce nonmonotonic behavior in the mass flux when increasing magma permeability. Using this physics-based model in a Bayesian inversion, we link data sets from Mount St. Helens such as extrusion flux and earthquake depths with petrological data to estimate unknown model parameters, including magma chamber pressure and water content, magma permeability constants, conduit radius, and friction along the conduit walls. Even with this relatively simple model and limited data, we obtain improved constraints on important model parameters. We find that the magma chamber had low (<5 wt %) total volatiles and that the magma permeability scale is well constrained at ~10 –11.4 m 2 to reproduce observed dome rock porosities. Here, compared with previous results, higher magma overpressure and lower wall friction are required to compensate for increased viscous resistance while keeping extrusion rate at the observed value.

58 GEOSCIENCES↗

Discrete Regularization for Calibration of Geologic Facies Against Dynamic Flow Data

Abstract Subsurface flow model calibration involves many more unknowns than measurements, leading to ill‐posed problems with nonunique solutions. To alleviate nonuniqueness, the problem is regularized by constraining the solution space using prior knowledge. In certain sedimentary environments, such as fluvial systems, the contrast in hydraulic properties of different facies types tends to dominate the flow and transport behavior, making the effect of within facies heterogeneity less significant. Hence, flow model calibration in those formations reduces to delineating the spatial structure and connectivity of different lithofacies types and their boundaries. A major difficulty in calibrating such models is honoring the discrete, or piecewise constant, nature of facies distribution. The problem becomes more challenging when complex spatial connectivity patterns with higher‐order statistics are involved. This paper introduces a novel formulation for calibration of complex geologic facies by imposing appropriate constraints to recover plausible solutions that honor the spatial connectivity and discreteness of facies models. To incorporate prior connectivity patterns, plausible geologic features are learned from available training models. This is achieved by learning spatial patterns from training data, e.g., ‐SVD sparse learning or the traditional Principal Component Analysis. Discrete regularization is introduced as a penalty functions to impose solution discreteness while minimizing the mismatch between observed and predicted data. An efficient gradient‐based alternating directions algorithm is combined with variable splitting to minimize the resulting regularized nonlinear least squares objective function. Numerical results show that imposing learned facies connectivity and discreteness as regularization functions leads to geologically consistent solutions that improve facies calibration quality.

Khaninezhad, Mohammad‐Reza↗

Pulmonary ACE2 expression in neonatal and adult rats

Children show a distinct presentation of COVID‐19, characterized by a lower incidence and mild phenotype, but the reason for this is still unknown. The angiotensin‐converting enzyme 2 (ACE2) functions as the primary cell entry receptor for Severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2) and is thought to cause distinct clinical features between children and old people. The primary purpose of this study was to determine whether differences exist in the level of expression and distribution of ACE2 between neonatal and adult rat lungs. The lung tissues from rats of various ages were used to investigate the expression patterns of ACE2. Western blot, immunohistochemistry, and immunofluorescence were used to quantify or identify the localization of ACE2 in rat lungs. ACE2 was homogenously expressed in fewer alveolar type II (AT2) cells in the neonatal lung, with no polarization to the alveolar space and additional expression in pulmonary endothelium when compared to adult rat lungs. These findings suggest that the patterns of ACE2 distribution and cellular localization in rat lungs change with age.

Zhao, Depeng↗

Chapter 10.2: Encapsulant Materials for PV Modules

Encapsulant materials used in photovoltaic (PV) modules serve multiple purposes; it provides optical coupling of PV cells and protection against environmental stress. Polymers must perform these functions under prolonged periods of high temperature, humidity, and UV radiation. When PV panels were first developed in the 1960s and the 1970s, the dominant encapsulants were based on polydimethyl siloxane (PDMS). Ethylene-co-vinyl acetate (EVA) is currently the dominant encapsulant chosen for PV applications, not because it has the best combination of properties, but because it is an economical option with an established history of acceptable durability. Getting new products onto the market is challenging because there is no room for dramatic improvements, and one must balance the initial cost and performance with the unknowns of long-term service life. Recently, there has been renewed interest in using alternative encapsulant materials with some significant manufacturers switching from EVA to polyolefin elastomer-based (POE) alternatives.

14 SOLAR ENERGY↗

Environmental and economic analyses of chemical recycling via dissolution of waste polyethylene terephthalate

Globally, more than 1000 organizations and 175 nations are facing the plastic waste problem and have realized the need to transition from “linear-to-circular” economy of plastics. While the current mechanical recycling technologies for plastics are struggling to increase the U.S. plastic recycling rates beyond 9%, chemical recycling technologies become important complementary technologies to the predominant mechanical recycling that are needed to realize the circular economy in plastics supply chains. Dissolution is one such chemical recycling technology that can recycle waste plastic back into high-quality virgin grade plastic. However, the environmental and economic impacts of chemical recycling of waste polyethylene terephthalate (PET) via dissolution technology using a green solvent are unknown. Our study evaluated environmental metrics such as greenhouse gas (GHG) emissions and cumulative energy demand, and economic metrics such as net present value (NPV), minimum selling price, payback period, return on investment, and discounted internal rate of return for three dissolution processes with polymer recovery via anti-solvent, evaporation, and cooling precipitation techniques. The dissolution process with evaporation technique was the most economically favorable, whereas that with cooling technique was the most environmentally favorable. The anti-solvent approach had low economic performance and the highest environmental impacts. The NPV for all of these technologies ranged from $2.67 MM to $10.93 MM for a capacity of 8,400 MT/year and was found to be the highest for dissolution with evaporation approach and the least for anti-solvent approach. The cradle-to-gate GHG emissions and energy demand for PET dissolution processes ranged from 1.33-3.77 kg CO2-eq/kg of chemically recycled (CR) PET and18.9-56.1 MJ/kg of CR-PET, respectively. These economic and environmental metrics will be helpful in evaluating the sustainability of circular PET supply chains in the U.S.

09 BIOMASS FUELS↗

Perioperative Timing of Infliximab and the Risk of Serious Infection After Elective Hip and Knee Arthroplasty

Objective The optimal timing of tumor necrosis factor antagonists before elective surgery is unknown. This study evaluated the association between infliximab timing and serious infection after elective hip or knee arthroplasty. Methods A retrospective cohort study evaluated US Medicare patients with rheumatoid arthritis, inflammatory bowel disease, psoriasis, psoriatic arthritis, or ankylosing spondylitis who received infliximab within 6 months of elective knee or hip arthroplasty from 2007 to 2013. Propensity‐adjusted analyses examined whether infliximab stop timing (time between the most recent infusion and surgery) was associated with hospitalized infection within 30 days or prosthetic joint infection ( PJI ) within 1 year. Results Hospitalized infection within 30 days occurred after 270 of 4,288 surgeries (6.3%). Infliximab stop timing <4 weeks versus 8–12 weeks was not associated with an increase in infection within 30 days (propensity‐adjusted odds ratio [ OR ] 0.90 [95% confidence interval (95% CI ) 0.60–1.34]). The rate of PJI was 2.9 per 100 person‐years and was not increased in patients with stop timing <4 weeks versus 8–12 weeks (hazard ratio [ HR ] 0.98 [95% CI 0.52–1.87]). Glucocorticoid dosage >10 mg/day was associated with increased risk of 30‐day infection ( OR 2.11 [95% CI 1.30–3.40]) and PJI ( HR 2.70 [95% CI 1.30–5.60]). Other risk factors for infection included elderly age, comorbidities, revision surgery, and previous hospitalized infection. Conclusion Administering infliximab within 4 weeks of elective knee or hip arthroplasty was not associated with a higher risk of short‐ or long‐term serious infection compared to withholding infliximab for longer time periods. Glucocorticoid use, especially >10 mg/day, was associated with an increased infection risk.

George, Michael D.↗