Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “torque”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

The stability of motion of satellites with flexible appendages

The mathematical formulation associated with the problem of stability of motion of a satellite consisting of a main rigid body and three (or less) pairs of flexible rods is presented. The rods are capable of flexure in two orthogonal directions. Whereas the rotational motion of the body is described by generalized coordinates depending on time alone, the elastic displacements of the rods depend both on spatial position and time. Assuming no external torques, there exist motion integrals in the form of momentum integrals. These integrals can be regarded as constraint equations relating the system velocities, and used to reduce the number of variables describing the motion. The stability analysis has been carried out by means of an extension of the Liapunov direct method. Since the elastic vibrations result in energy dissipation, it is shown that the equilibrium position is asymptotically stable if the Hamiltonian is positive definite and unstable if it can take negative values in the neighborhood of the equilibrium. Determining the sign definiteness of the Hamiltonian is complicated by the fact that it contains spatial derivatives of the elastic displacements. Two methods are presented to cope with this problem. The first, the standard modal analysis in conjunction with series truncation, develops criteria in terms of infinite series associated with the natural modes and frequencies of the elastic rods. The second, the method of integral coordinates, yields closed-form stability criteria involving the system parameters, such as the body moments of inertia, the length and mass distribution of the rods, the lowest natural frequencies of the rods, and the satellite spin velocity.

Meirovitch, L.↗

Dynamic errors in strapdown inertial navigation systems

Motion-induced errors in strapdown inertial navigation systems are discussed. The errors generated in single-degree-of-freedom gyros and accelerometers are treated in great detail. These sensor errors are related to errors at the system level and common pulse rebalance techniques are compared. Since instrument single transmission characteristics are found to be important, describing function analysis is applied to nonlinear pulse torqued inertial sensor loops, and the results are compared with simulations. Two means for reducing motion-induced errors are explored: (1) selection of inertial sensor parameters, and (2) active error compensation by measuring the environment, computing the errors generated, and correcting for them.

Source record↗

ISIS-B spacecraft magnetic tests

Magnetic tests of the ISIS B spacecraft were conducted to determine the various magnetic moments of the spacecraft, evalute its spin and attitude control systems, and calibrate the six onboard magnetometer probes. Test procedures and equipment are described. Techniques for evaluting the data are discussed, and test results are presented. The spacecraft's magnetic characteristics were found to be satisfactory. Proper threshold values for gating the torquing coils were obtained. The onboard magnetometers were satisfactorily calibrated.

Boyle, J. C.↗

Inertial navigation system using three TDF gyroscopic sensors not jointly mounted on a stable platform

An inertial navigation system is described and analyzed based on two two-degree-of-freedom Schuler-gyropendulums and one two-degree-of-freedom azimuth gyro. The three sensors, each base motion isolated about its two input axes, are mounted on a common base, strapped down to the vehicle. The up and down pointing spin vectors of the two properly tuned gyropendulums track the vertical and indicate physically their velocity with respect to inertial space. The spin vector of the azimuth gyro is pointing northerly parallel to the earth axis. The system can be made self-aligning on a stationary base. If external measurements for the north direction and the vertical are available, initial disturbance torques can be measured and easily biased out. The error analysis shows that the system is practicable with today's technology.

Stieler, B.↗

Quasi-seasonal variation in the sun

The results of an investigation on the effects of earth seasonal changes on solar activity, particularly sunspots, are given. These results show corpuscular and electromagnetic activity increased during the equinoctial months. In addition the electromagnetic aspect tends to increase during the winter months. It was suggested that seasonal changes in sunspot numbers may be caused by the tidal forces and the processional torques exerted by the various planets in the solar atmosphere.

Chandra, S.↗

An evaluation of string theory for the prediction of dynamic tire properties using scale model aircraft tires

The string theory was evaluated for predicting lateral tire dynamic properties as obtained from scaled model tests. The experimental data and string theory predictions are in generally good agreement using lateral stiffness and relaxation length values obtained from the static or slowly rolling tire. The results indicate that lateral forces and self-aligning torques are linearly proportional to tire lateral stiffness and to the amplitude of either steer or lateral displacement. In addition, the results show that the ratio of input excitation frequency to road speed is the proper independent variable by which frequency should be measured.

Clark, S. K.↗

In-orbit flexible spacecraft dynamics program

A continuous flexible body nonlinear dynamics computer program is used for simulating the spinning mode performance of a spacecraft under applied control torques. The program takes into account the continuous flexible nature of the antennas by representing deflections in terms of shape functions and integrated the spatial dependence in the formulation of the equations of motion. Comparison of RAE flight data on roll, pitch, and yaw with predictions of the computer program in the gravity gradient mode show fair to good agreement in roll and pitch and excellent agreement in the yaw angle.

Fedor, J. V.↗

The reduction of a ""safety catastrophic'' potential hazard: A case history

A worst case analysis is reported on the safety of time watch movements for triggering explosive packages on the lunar surface in an experiment to investigate physical lunar structural characteristics through induced seismic energy waves. Considered are the combined effects of low pressure, low temperature, lunar gravity, gear train error, and position. Control measures constitute a seal control cavity and design requirements to prevent overbanking in the mainspring torque curve. Thus, the potential hazard is reduced to safety negligible.

Joseph P. Jones↗

A solid state film transport

A solid state film transport utilizing piezoelectric motion was evaluated and found to have potential in film positioning applications. The concept is particularly useful in flight equipment where torque motors and conventional transport mechanisms are difficult to apply. A demonstration model utilizing 5-inch film was designed, tested, and evaluated. Three basic operating modes were investigated. Design goals for step size were achieved under controlled conditions. The continuous mode test results were marred by an inability to transfer efficiently the piezoceramic motion to the film itself. The design, test results, and problem areas are described.

Davis, C. M.↗

A transient solution for domain wall motion

An analytic solution of transient wall motion in a bulk ferromagnetic material is obtained from the dynamic torque equations with a Gilbert damping term. The steady state solution reduces to previously obtained, well known solutions.

Bourne, H. C., Jr.↗

Optimal speed sharing characteristics of a series-hybrid bearing

A series-hybrid bearing assembly consisting of a conical hydrostatic fluid-film bearing and a ball bearing is described. Computer studies are used to predict friction torque and life characteristics of a 150-millimeter ball bearing. A conical hydrostatic fluid-film bearing is designed for minimum friction and maximum speed reduction of the ball-bearing component of the series-hydrid bearing. At a thrust load of 4000 pounds and speeds corresponding to DN (bearing bore in millimeters times shaft speed in rpm) values of 3 and 4 million, ball-bearing speed may be reduced by 30 percent. This speed reduction corresponds to ball-bearing fatigue life improvement factors of 3.4 at 3 million DN and 5.9 at 4 million DN. An oil flow rate of 18.2 pounds per minute is required to maintain a fluid-film thickness of 0.001 inch in the hydrostatic bearing.

Nypan, L. J.↗

Design and fabrication of prototype system for early warning of impending bearing failure

Ball bearing performance tests run on several identical ball bearings under a variety of load, speed, temperature, and lubrication conditions are reported. Bearing temperature, torque, vibration, noise, strain, cage speed, etc., were monitored to establish those measurements most suitable as indicators of ball bearing health. Tape records were made under steady-state conditions of a variety of speeds and loads. Sample sections were selected for narrowband spectral analysis with a real time analyzer. An artificial flow was created across the inner race surface of one bearing using an acid etch technique to produce the scratch. Tape records obtained before and after established a characteristic frequency response that identifies the presence of the flow. The signals found most useful as indicators of performance degradation were ultrasonic outputs.

Broderick, J. J.↗

Design analysis for a nutating plate drive 4

A simplified design analysis was conducted on a nutating plate type drive system for a 2500 horsepower helicopter main rotor gear box. A drive system that split the output torque evenly between two nutating plates for the purpose of reducing the load on each nutating plate was analyzed. Needle bearings were used on the nutating plate pins. The results of the analysis indicate that the required load capacity of the pin bearings and the speed of the nutating plate bearings were beyond the state-of-the-art capacity of rolling-element bearings. The analysis further indicates that the nutating plate drive is less efficient, and results in a higher weight per horsepower than a conventional planetary helicopter transmission with similar design specifications.

Loewenthal, S. H.↗

Oil-film-parameter investigation

A counter rotating fixture was designed and built to measure starved EHD film thicknesses. Some good geometry glass races were obtained. A theoretical analysis of starvation was made. Measurements of retainer stability during bimode torque disturbances were made. The most common form of bimode was related to stability of retainer cock.

Kingsbury, E. P.↗

Design and control of remote manipulators

Results of investigations on vibrational modes of manipulators revealed: (1) any arbitrary manipulator may be analyzed for its small motion compliances; (2) a simulation of the Martin-Marietta shuttle boom with a 65,000 lb. payload attached, indicated three natural frequencies; and (3) simulations can be made of rigid limbs and flexible joints as well as for flexible limbs and locked joints and combinations thereof. Trajectories for arms were determined so that some integral criterion such as integral of kinetic energy or control torque magnitude is minimized over a motion of the arm. Experiments performed to evaluate various TV displays in conjunction with manipulator control modes showed that when mounted directly to the manipulator control arm and arranged to look approximately along the arm to the hand the operator could perform the task almost as quickly as when viewing the task directly.

Whitney, D. E.↗

Space Satellite Dynamics with Applications to Sunlight Pressure Attitude Control

A research program into three aspects of space satellite dynamics was carried out. First, a four-dimensional space-time formulation of Newtonian mechanics is developed. This theory allows a new physical interpretation of the conservation theorems of mechanics first derived rigorously by Noether. Second, a new concept for estimating the three angles which specify the orientation in space of a rigid body is presented. Two separate methods for implementing this concept are discussed, one based on direction cosines, the other on quaternions. Two examples are discussed: constant orientation in space, and constant rate of change of the three angles with time. Third, two synchronous equatorial orbit communication satellite designs which use sunlight pressure to control their attitude are analyzed. Each design is equipped with large reflecting surfaces, called solar sails, which can be canted in different directions to generate torques to correct pointing errors.

Stuck, B. W.↗

Design and cold-air investigation of a turbine for a small low-cost turbofan engine

An 8.00-in mean diameter two-stage turbine was investigated over a range of speeds from 0 to 110 percent of equivalent design speed and over a range of pressure ratios from 1.79 to 5.14. Presented are design information and turbine performance for first-stage and two-stage operation. Results are presented in terms of equivalent specific work, torque, mass flow, rotor exit flow angle, and efficiency.

Kofskey, M. G.↗

Rotor systems research aircraft predesign study. Volume 2: Conceptual study report

The overall feasibility of the technical requirements and concepts for a rotor system research aircraft (RSRA) was determined. The designs of two aircraft were then compared against the RSRA requirements. One of these is an all new aircraft specifically designed as an RSRA vehicle. A new main rotor, transmission, wings, and fuselage are included in this design. The second aircraft uses an existing Sikorsky S-61 main rotor, an S-61 roller gearbox, and a highly modified Sikorsky S-67 airframe. The wing for this aircraft is a new design. Both aircraft employ a fan-in-fin anti-torque/yaw control system, T58-GE-16 engines for rotor power, and TF34-GE-2 turbofans for auxiliary thrust. Each aircraft meets the basic requirements and goals of the program. The all new aircraft has inflight variable main rotor shaft tilt, a side-by-side cockpit seating arrangement, and is slightly faster in the compound mode. It is also somewhat lighter since it uses new dynamic components specifically designed for the RSRA. Preliminary development plans, including schedules and costs, were prepared for both of these aircraft.

Schmidt, S. A.↗