Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “timing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Adaptive time scaling for accelerating explicit finite element analysis

A method for accelerating an explicit finite element analysis (FEA) simulation of a modeled system or process includes performing an initial iteration of the FEA simulation according to a baseline time interval via an FEA computing network, and calculating a criteria ratio of a predetermined set of scaling criteria for the modeled system or process. The method includes determining a time-scaling factor using the criteria ratio via the FEA computing network as a function of the criteria ratio, and then applying the time-scaling factor to the baseline time interval to generate a scaled time interval. The scaled time interval accelerates simulation time of the FEA simulation. The method includes performing a subsequent iteration of the explicit FEA simulation at the scaled time interval using the FEA computing network. The process continues for subsequent iterations, with the time-scaling factor adapting with each iteration.

Chen, Jian↗

Thermal Neutron Die-Way-Time Studies for P and DGNAA of Radioactive Waste Drums at the MEDINA Facility

In Germany, radioactive waste with negligible heat production has to pass through a process of quality checking in order to check its conformance with national regulations prior to its transport, intermediate storage and final disposal. Additionally to its radioactive components, the waste may contain non-radioactive chemically toxic substances that can adversely affect human health and pollute the environment, especially the ground water. After an adequate decay time, the waste radioactivity will become harmless but the non-radioactive substances will persist over time. In principle, these hazardous substances may be quantified from traceability and quality controls performed during the production of the waste packages. As a consequence, a research and development program was initiated in 2007 with the aim to develop a nondestructive analytical technique for radioactive waste packages based on prompt and delayed gamma neutron activation analysis (P and DGNAA) employing a DT-neutron generator in pulsed mode. In a preliminary study it was experimentally demonstrated that P and DGNAA is suitable to determine the chemical composition of large samples. In 2010 a facility called MEDINA (Multi Element Detection based on Instrumental Neutron Activation) was developed for the qualitative and quantitative determination of nonradioactive, toxic elements and substances in 200-l steel drums. The determination of hazardous substances and elements is generally achieved measuring the prompt gamma-rays induced by thermal neutrons. Additional information about the composition of the waste matrix could be derived measuring the delayed gamma-rays from short life activation products. However a sensitive detection of these delayed gamma-rays requires that thermal neutrons have almost vanished. Therefore, the thermal neutron die-away-time has to be known in order to achieve an optimal discrimination between prompt and delayed gamma-ray spectra acquisition. Measurements Thermal neutron die-away times have been determined for the following cases: a) the empty chamber, b ) an empty 200-l steel drum, for a 200-l steel drum filled c) with concrete d) with polyethylene and e) with a mixture of polyethylene and concrete by measuring the prompt-gamma ray count rate of relevant isotopes like of {sup 1}H, {sup 10}B, {sup 12}C, {sup 28}Si, {sup 35}Cl, {sup 40}Ca and {sup 56}Fe which are emitted from different parts of the facility and the sample. Additionally, the average die-away-time was determined from the total detector count rate. The neutron generator was operated with a neutron emission of 8x10{sup 7} n.s{sup -1}, a neutron pulse with a length of 250 μs and a repetition time of 5 ms. The spectra were acquired between the neutron pulses over t{sub c}=500 μs after a pre-defined waiting time t{sub D} (multiple of 500 μs). The thermal neutron die-away time was ranging between 0.9 ms and 5 ms according to the sample composition. As an example the measured thermal neutron die-away-time Λ [μs] of a drum filled with concrete is presented. Detailed results of this study will be presented and discussed. (authors)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A non-intrusive parallel-in-time adjoint solver with the XBraid library

In this paper, an adjoint solver for the multigrid-in-time software library XBraid is presented. XBraid provides a non-intrusive approach for simulating unsteady dynamics on multiple processors while parallelizing not only in space but also in the time domain (XBraid: Parallel multigrid in time, http://llnl.gov/casc/xbraid). It applies an iterative multigrid reduction in time algorithm to existing spatially parallel classical time propagators and computes the unsteady solution parallel in time. Techniques from Automatic Differentiation are used to develop a consistent discrete adjoint solver which provides sensitivity information of output quantities with respect to design parameter changes. The adjoint code runs backwards through the primal XBraid actions and accumulates gradient information parallel in time. It is highly non-intrusive as existing adjoint time propagators can easily be integrated through the adjoint interface. The adjoint code is validated on advection-dominated flow with periodic upstream boundary condition. We report it provides similar strong scaling results as the primal XBraid solver and offers great potential for speeding up the overall computational costs for sensitivity analysis using multiple processors.

97 MATHEMATICS AND COMPUTING↗

A time-parallel method for scalable heat transfer simulations of additive manufacturing

Here, a major challenge in simulating the thermal behavior in additive manufacturing processes is the disparate length and time scales between transport phenomena occurring in the melt pool and the component. A common simulation approach relies on spatial decomposition for parallel computing, but due to the nature of heat transfer in AM, where most of the computational expenditure is localized near the melt pool, the computational speedup from spatial parallelization saturates quickly. Therefore, additional parallelism by means of time-domain decomposition is needed to fully take advantage of high-performance computing (HPC) resources. This work introduces a time-parallel method to improve the computational scalability of additive manufacturing simulations on HPC systems, while maintaining high temporal resolution of heat transfer near the melt pool. The method, inspired by the nonlinear paraexp formalism, performs an iterative superposition of nonlinear solutions to the initial value problem, integrating the heat equation across overlapping time-parallel intervals. For a single layer of the NIST AMB2018–01 L7 benchmark problem, the method achieves a 38.51x speedup in wall-clock time with a maximum error in the global temperature solution of 0.99%. This reduces the total solution time from 196.72 min to 5.11 min on 128 nodes of the ORNL Frontier supercomputer. The tradeoff between accuracy and total wall-clock time is investigated and recommendations for time-parallel deployment for AM problems are made.

Additive manufacturing↗

An experimental comparison of a space-time multigrid method with PFASST for a reaction-diffusion problem

We consider two parallel-in-time approaches applied to a (reaction) diffusion problem, possibly non-linear. In particular, we consider PFASST (Parallel Full Approximation Scheme in Space and Time) and space-time multigrid strategies. For both approaches, we start from an integral formulation of the continuous time dependent problem. Then, a collocation form for PFASST and a discontinuous Galerkin discretization in time for the space-time multi-grid are employed, resulting in the same discrete solution at the time nodes. Strong and weak scaling of both multilevel strategies are compared for varying orders of the temporal discretization. Moreover, we investigate the respective convergence behavior for non-linear problems and highlight quantitative differences in execution times

97 MATHEMATICS AND COMPUTING↗

Quantifying groundwater travel time near managed recharge operations using 35S as an intrinsic tracer

By identifying groundwater retention times near managed aquifer recharge (MAR) facilities is a high priority for managing water quality, especially for operations that incorporate recycled wastewater. In order to protect public health, California guidelines for Groundwater Replenishment Reuse Projects require a minimum 2–6 month subsurface retention time for recycled water depending on the level of disinfection, which highlights the importance of quantifying groundwater travel times on short time scales. This study developed and evaluated a new intrinsic tracer method using the naturally occurring radioisotope sulfur-35 (35S). The 87.5 day half-life of 35S is ideal for investigating groundwater travel times on the <1 year timescale of interest to MAR managers. Natural concentrations of 35S found in water as dissolved sulfate (35SO4) were measured in source waters and groundwater at the Rio Hondo Spreading Grounds in Los Angeles County, CA, and Orange County Groundwater Recharge Facilities in Orange County, CA. 35SO4 travel times are comparable to travel times determined by well-established deliberate tracer studies. The study also revealed that 35SO4 in MAR source water can vary seasonally and therefore careful characterization of 35SO4 is needed to accurately quantify groundwater travel time. But, more data is needed to fully assess whether or not this tracer could become a valuable tool for managers.

54 ENVIRONMENTAL SCIENCES↗

Use of ruthenium dyes for subnanosecond detector fidelity testing in real time transient absorption

Transient absorption spectroscopy is a powerful tool for the study of photoreactions on time scales from femtoseconds to seconds. Typically, reactions slower than {approx}1 ns are recorded by the ''classical'' technique; the reaction is triggered by an excitation flash, and absorption changes accompanying the reaction are recorded in real time using a continuous monitoring light beam and a detection system with sufficiently fast response. The pico- and femtosecond region can be accessed by the more recent ''pump-probe'' technique, which circumvents the difficulties of real time detection on a subnanosecond time scale. This is paid for by accumulation of an excessively large number of shots to sample the reaction kinetics. Hence, it is of interest to extend the classical real time technique as far as possible to the subnanosecond range. In order to identify and minimize detection artifacts common on a subnanosecond scale, like overshoot, ringing, and signal reflections, rigorous testing is required of how the detection system responds to fast changes of the monitoring light intensity. Here, we introduce a novel method to create standard signals for detector fidelity testing on a time scale from a few picoseconds to tens of nanoseconds. The signals result from polarized measurements of absorption changes upon excitation of ruthenium complexes {l_brace}[Ru(bpy){sub 3}]{sup 2+} and a less symmetric derivative{r_brace} by a short laser flash. Two types of signals can be created depending on the polarization of the monitoring light with respect to that of the excitation flash: a fast steplike bleaching at magic angle and a monoexponentially decaying bleaching for parallel polarizations. The lifetime of the decay can be easily varied via temperature and viscosity of the solvent. The method is applied to test the performance of a newly developed real time transient absorption setup with 300 ps time resolution and high sensitivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Parallel-In-Time Multigrid with Adaptive Spatial Coarsening for The Linear Advection and Inviscid Burgers Equations

We apply a multigrid reduction-in-time (MGRIT) algorithm to hyperbolic partial differential equations in one spatial dimension. This study is motivated by the observation that sequential time-stepping is a computational bottleneck when attempting to implement highly concurrent algorithms; thus parallel-in-time methods are desirable. MGRIT adds parallelism by using a hierarchy of successively coarser temporal levels to accelerate the solution on the finest level. In the case of explicit time-stepping, spatial coarsening is a suitable approach to ensure that stability conditions are satisfied on all levels, and it may be useful for implicit time-stepping by producing cheaper multigrid cycles. Unfortunately, uniform spatial coarsening results in extremely slow convergence when the wave speed is near zero, even if only locally. We present an adaptive spatial coarsening strategy that addresses this issue for the variable coefficient linear advection equation and the inviscid Burgers equation using first-order explicit or implicit time-stepping methods. Serial numerical results show this method offers significant improvements over uniform coarsening and is convergent for the inviscid Burgers equation with and without shocks. Parallel scaling tests on up to 128K cores indicate that run-time improvements over serial time-stepping strategies are possible when spatial parallelism alone saturates, and that scalability is robust for oscillatory solutions which change on the scale of the grid spacing.

97 MATHEMATICS AND COMPUTING↗

High-speed digitization readout of silicon photomultipliers for time of flight positron emission tomography

We report on work to develop a system with about 100 picoseconds (ps) time resolution for time of flight positron emission tomography [TOF-PET]. The chosen photo detectors for the study were Silicon Photomultipliers (SiPM's). This study was based on extensive experience in studying timing properties of SiPM's. The readout of these devices used the commercial high speed digitizer DRS4. We applied different algorithms to get the best time resolution of 155 ps Guassian (sigma) for a LYSO crystal coupled to a SiPM. We consider the work as a first step in building a prototype TOF-PET module. The field of positron-emission-tomography (PET) has been rapidly developing. But there are significant limitations in how well current PET scanners can reconstruct images, related to how fast data can be acquired, how much volume they can image, and the spatial and temporal resolution of the generated photons. Typical modern scanners now include multiple rings of detectors, which can image a large volume of the patient. In this type of scanner, one can treat each ring as a separate detector and require coincidences only within the ring, or treat the entire region viewed by the scanner as a single 3 dimensional volume. This 3d technique has significantly better sensitivity since more photon pair trajectories are accepted. However, the scattering of photons within the volume of the patient, and the effect of random coincidences limits the technique. The advent of sub-nanosecond timing resolution detectors means that there is potentially much better rejection of scattered photon events and random coincidence events in the 3D technique. In addition, if the timing is good enough, then the origin of photons pairs can be determined better, resulting in improved spatial resolution - so called 'Time-of-Flight' PET, or TOF-PET. Currently a lot of activity has occurred in applications of SiPMs for TOF-PET. This is due to the devices very good time resolution, low profile, lack of high voltage needed, and their non-sensitivity to magnetic fields. While investigations into this technique have begun elsewhere, we feel that the extensive SiPM characterization and data acquisition expertise of Fermilab, and the historical in-depth research of PET imaging at University of Chicago will combine to make significant strides in this field. We also benefit by a working relationship with the SiPM producer STMicroelectronics (STM).

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Benchmarking Real-Time Control Platforms Using a Matlab/Simulink Coder with Applications in the Control of DC/AC Switched Power Converters

In the control of DC/AC switched power converters (SPC), one of the most important aspects to be considered is the selection of the real-time control platform. The real-time control platform must be able to meet the high performance efficiency and regulation requirements of the DC/AC SPC, as these typically operate at switching frequencies in the order of kHz to MHz. For this reason, the hardware characteristics of the ADC and PWM, and the processing capacity of the real-time control platform are of vital importance when implementing advanced digital controllers that maintain voltage and current levels within regulatory standards. In this context, we aimed to perform a comparative study of the computation times of different real-time control platforms when implementing different control strategies for DC/AC switched power converters. We also analyzed the impact of the real-time control platforms on the THD of the voltages generated by the DC/AC switched power converters. With the help of this paper, researchers and developers will have criteria to select which real-time control platform to use in real-time control for DC/AC SPC applications.

42 ENGINEERING↗

Kinetic Simulation of Collisional Magnetized Plasmas with Semi-implicit Time Integration

Plasmas with varying collisionalities occur in many applications, such as tokamak edge regions, where the flows are characterized by significant variations in density and temperature. While a kinetic model is necessary for weakly-collisional high-temperature plasmas, high collisionality in colder regions render the equations numerically stiff due to disparate time scales. In this study, we propose an implicit–explicit algorithm for such cases, where the collisional term is integrated implicitly in time, while the advective term is integrated explicitly in time, thus allowing time step sizes that are comparable to the advective time scales. This partitioning results in a more efficient algorithm than those using explicit time integrators, where the time step sizes are constrained by the stiff collisional time scales. Finally, we implement semi-implicit additive Runge–Kutta methods in COGENT, a high-order finite-volume gyrokinetic code and test the accuracy, convergence, and computational cost of these semi-implicit methods for test cases with highly-collisional plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Real-Time Analysis and Signal Optimization for Charge Detection Mass Spectrometry

Charge detection mass spectrometry (CDMS) is an important tool for measuring mass distributions for high mass samples and heterogeneous mixtures. In CDMS, single ions are trapped and their m/z and charge are measured simultaneously. As a single particle technique, the average signal must be optimized to maximize the number of single ion trapping events. If the average signal is too small, most of the trapping events will be empty, and if the average signal is too large, most of the trapping events will contain multiple ions. In recent embodiments, the time domain signal from the trapped ion is analyzed by fast Fourier transforms. The analysis time is much longer that the data collection time which precludes real-time optimization of the experimental conditions. In this paper, we describe the implementation of CDMS with real-time analysis. Processing the data in real time allows the average signal intensities to be dynamically optimized to maximize the number of single ion trapping events. Real-time analysis also allows the experimental settings to be optimized in a timely manner to target specific mass regimes to maximize the useful information content of the measurements. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The precise time-dependent solution of the Fokker–Planck equation with anomalous diffusion

We study the time behavior of the Fokker–Planck equation in Zwanzig’s rule (the backward-Ito’s rule) based on the Langevin equation of Brownian motion with an anomalous diffusion in a complex medium. The diffusion coefficient is a function in momentum space and follows a generalized fluctuation–dissipation relation. We obtain the precise time-dependent analytical solution of the Fokker–Planck equation and at long time the solution approaches to a stationary power-law distribution in nonextensive statistics. As a test, numerically we have demonstrated the accuracy and validity of the time-dependent solution. - Highlights: • The precise time-dependent solution of the Fokker–Planck equation with anomalous diffusion is found. • The anomalous diffusion satisfies a generalized fluctuation–dissipation relation. • At long time the time-dependent solution approaches to a power-law distribution in nonextensive statistics. • Numerically we have demonstrated the accuracy and validity of the time-dependent solution.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-order multirate explicit time-stepping schemes for the baroclinic-barotropic split dynamics in primitive equations

In order to treat the multiple time scales of ocean dynamics in an efficient manner, the baroclinic-barotropic splitting technique has been widely used for solving the primitive equations for ocean modeling. Based on the framework of strong stability-preserving Runge-Kutta approach, we propose two high-order multirate explicit time-stepping schemes (SSPRK2-SE and SSPRK3-SE) for the resulting split system in this paper. The proposed schemes allow for a large time step to be used for the three-dimensional baroclinic (slow) mode and a small time step for the two-dimensional barotropic (fast) mode, in which each of the two mode solves just need to satisfy their respective CFL conditions for numerical stability. Specifically, at each time step, the baroclinic velocity is first computed by advancing the baroclinic mode and fluid thickness of the system with the large time-step and the assistance of some intermediate approximations of the barotropicmode obtained by substepping with the small time step; then the barotropic velocity is corrected by using the small time step to re-advance the barotropic mode un-der an improved barotropic forcing produced by interpolation of the forcing terms from the preceding baroclinic mode solves; lastly, the fluid thickness is updated by coupling the baroclinic and barotropic velocities. Additionally, numerical inconsistencies on the discretized sea surface height caused by the mode splitting are relieved via a reconciliation process with carefully calculated flux deficits. Here, two benchmark tests from the “MPAS-Ocean” platform are carried out to numerically demonstrate the performance and parallel scalability of the proposed SSPRK-SE schemes.

54 ENVIRONMENTAL SCIENCES↗

Association Between Dispatch Complaint and Critical Prehospital Time Intervals in Suspected Stroke 911 Activations in the National Emergency Medical Services Information System, 2012–2016

Emergency Medical Services can help improve stroke outcomes by recognizing stroke symptoms, establishing response priority for 911 calls, and minimizing prehospital delays. This study examines 911 stroke events and evaluates associations between events dispatched as stroke and critical EMS time intervals. Data from the National Emergency Medical Services Information System, 2012 to 2016, were analyzed. Activations from 911 calls with a primary or secondary provider impression of stroke were included for adult patients transported to a hospital destination. Three prehospital time intervals were evaluated: (1) response time (RT) ≤8 min, (2) on-scene time (OST) ≤15 min, and (3) transport time (TT) ≤12 min. Associations between stroke dispatch complaint and prehospital time intervals were assessed using multivariate regression to estimate adjusted risk ratios (ARR) and 95% confidence intervals (CIs). Approximately 37% of stroke dispatch complaints were identified by EMS as a suspected stroke. Compared to stroke events without a stroke dispatch complaint, median OST was shorter for events with a stroke dispatch (16 min vs. 14 min, respectively). In adjusted analyses, events dispatched as stroke were more likely to meet the EMS time benchmark for OST ≤15 min (OST, 1.20 [1.20–1.21]), but not RT or TT (RT, [1.00–1.01]; TT, 0.95 [0.94–0.95]). Furthermore, our results indicate that dispatcher recognition of stroke symptoms reduces the time spent on-scene by EMS personnel. These findings can inform future EMS stroke education and quality improvement efforts to emphasize dispatcher recognition of stroke signs and symptoms, as EMS dispatchers play a crucial role in optimizing the prehospital response.

59 BASIC BIOLOGICAL SCIENCES↗

A neural networks framework for real-time unfolding of neutron spectroscopic data at JET

A determination of fast ion population parameters such as intensity and kinetic temperature is important for fusion reactors. This becomes more challenging with finer time resolution of the measurements, since the limited data in each time slice cause increasing statistical variations in the data. This paper describes a framework using Bayesian-regularized neural networks (NNs) designed for such a task. The method is applied to the TOFOR 2.5 MeV fusion neutron spectrometer at JET. NN training data are generated by random sampling of variables in neutron spectroscopy models. Ranges and probability distributions of the parameters are chosen to match the experimental data. Results have shown good performance both on synthetic and experimental data. The latter was assessed by statistical considerations and by examining the robustness and time consistency of the results. The regularization of the training algorithm allowed for higher time resolutions than simple forward methods. The fast execution time makes this approach suitable for real-time analysis with a time resolution limit in the microsecond time scale.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Time and space resolved visible spectroscopic imaging CO{sub 2} laser produced extreme ultraviolet emitting tin plasmas

Experiments involving laser produced tin plasma have been carried out using a CO{sub 2} laser with an energy of 800 mJ/pulse and a full width at half maximum (FWHM) of 80 ns in vacuum. Time-integrated extreme ultraviolet spectral measurement showed that the peak of the extreme ultraviolet lithography spectrum was located at 13.5 nm and the spectrum profile's FWHM of the unresolved transition arrays was 1.1 nm. Plasma parameters of the electron temperature and density measurements in both axial and radial directions at later times had been obtained from a two-dimensional time and space resolved image spectra analysis. The axial spatial distribution of the electron density showed a 1/d{sup 2.6} decrease profile, and the radial spatial distribution of the electron density showed a 1/r{sup 1.1} profile, in which d is the axial distance from the target surface and r is the radial distance. The electron density was found to maintain symmetry across the radial distance at all delay times. Near the plasma plume center, the electron temperature T{sub e} varied slightly with increasing axial or radial distance, which was related to collisional decoupling and reheating of the ionized species in the plasma at distances longer than 3 to 4 mm. The space averaged electron temperature was measured in the range of 3.4-1.0 eV, and the space averaged electron density was measured in the range of 2.0 x 10{sup 17} to 2.2 x 10{sup 16} cm{sup -3}, as the time delay varied from 1.6 {mu}s to 3.6 {mu}s with respect to the pulse discharge. Time evolutions of the plasma temperature and density were found to have an apparent rise at a delay time of 2.4 {mu}s in the corresponding time of the laser pulse tail peak. This suggests that plasma parameters and extreme ultraviolet emission intensity can be controlled by a double pulse combined laser.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of cyclotron resonance relaxation time in the two-dimensional electron system

Dependence of cyclotron magneto-plasma mode relaxation time on electron concentration and temperature in the two-dimensional electron system in GaAs/AlGaAs quantum wells has been studied. Comparative analysis of cyclotron and transport relaxation time has been carried out. It was demonstrated that with the temperature increase transport relaxation time tends to cyclotron relaxation time. It was also shown that cyclotron relaxation time, as opposed to transport relaxation time, has a weak electron density dependence. The cyclotron time can exceed transport relaxation time by an order of magnitude in a low-density range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗