Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Structure and electrical properties of single-phase cobalt manganese oxide spinels Mn{sub 3-x}Co{sub x}O{sub 4} sintered classically and by spark plasma sintering (SPS)

Cobalt manganese oxide spinels Mn{sub 3-x}Co{sub x}O{sub 4} (with 0.98{<=}x{<=}3) were prepared by the thermal decomposition in air of oxalate precursors. The influence of the thermal treatments on the structure of these materials is emphasized. Single-phase ceramics were obtained after optimization of the sintering parameters. A precise phase diagram for the Co-Mn-O system is proposed according to thermal stability and structure of oxide powders. The electrical measurements on single-phase ceramics show that low values of resistivity can be achieved. The conduction could take place through jumps of polarons between Mn{sup 3+} and Mn{sup 4+} on octahedral sites. These compounds present interesting electrical characteristics for negative temperature coefficient (NTC) thermistor applications. - Grapical abstract: After elaboration of single-phase and well densified ceramics Mn{sub 3-x}Co{sub x}O{sub 4} (with 0.98{<=}x{<=}3) by conventional and spark plasma sintering, electrical measurements have been taken and low values of resistivity can be achieved. The conductivity shifts from an insulator, Mn{sub 3}O{sub 4} (cationic distribution: Mn{sup 2+}[Mn{sup 3+}]{sub 2}O{sub 4}) to a semiconductor solid solution probably due to the hopping of polarons between Mn{sup 3+} and Mn{sup 4+} on octahedral sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrocaloric Effect in a Lead Magnoniobate–Scandoniobate Relaxor

The electrocaloric effect and also the dielectric, pyroelectric, acoustic, and piezoelectric properties of a lead magnoniobate–scandoniobate solid solution in a biasing electric field have been studied. The dielectric and electromechanical contributions to the pyroelectric and electrocaloric effects are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microstructure and Wear Performance of Cobalt-Containing Iron-Based Slag-Free Self-shielded Flux-Cored Wire

A new type of cobalt-containing iron-based slag-free self-shielded flux-cored wire was developed for hardfacing. The influence of cobalt additions on the microstructure and wear performance of the hardfacing was investigated. The cobalt-containing iron-based hardfacing alloy has a typical hypereutectic microstructure consisting of primary M{sub 7}(C, B){sub 3} carbide, and a eutectic of M{sub 3}(C, B) carbide and austenite (part of which subsequently transformed into martensite). Cobalt promoted the formation of austenite and changed the morphology of the primary carbide and eutectic colonies. The morphology of primary carbide became fragmented with increasing cobalt due to the possible impeding effect of cobalt to the movement of the M{sub 7}(C, B){sub 3}/liquid interface. Different structures of the eutectic carbides were observed—the chrysanthemum structure for 1.42 wt.% cobalt, the skeleton form for 2.88 wt.% cobalt, the radial stripe 4.37 wt.% cobalt and the discrete stripe for 5.75 wt.% cobalt. Wear loss of the hardfacing alloy containing 2.88 wt.% cobalt was the smallest among all the alloys, owing to the large primary large carbide and skeleton-shaped eutectic carbides, the proper amount of austenite phase separating the M{sub 7}(C, B){sub 3} and M{sub 3}(C, B) carbides, the solid solution strengthening by cobalt in the matrix, and the high hardness of the alloy. Moreover, the wear resistance has a tendency to decrease with the increase in velocity as well as load.

36 MATERIALS SCIENCE↗

Effect of Different Heat Treatments on the Microstructural Evolution and Mechanical Properties of Ni-Cr-Si Alloy Fabricated by Laser Additive Manufacturing

Ni-Cr-Si alloy samples were fabricated on mild steel via laser additive manufacturing technology. The microstructural evolution and mechanical properties of the samples were studied systematically in as-deposited conditions and under three different types of heat-treated conditions. The scanning electron microscopy, energy-dispersive x-ray spectroscopy and x-ray diffraction results showed that the structures of the as-deposited samples were mainly dendritic matrices of γ(Ni, Fe), continuous interdendritic eutectics of γ + Ni{sub 3}B and discrete Cr-rich carbides and borides. After solid solution treatment, carbides (Cr{sub 7}C{sub 3}) and borides (CrB) precipitated on the boundary of the eutectic structure, distributing discretely in the matrix. In the solution plus aging heat-treated conditions, the interdendritic eutectics formed Ni{sub 3}Fe intermetallic compounds with a layered distribution. After annealing, the grains were refined, and the hard phases (CrB) were uniformly dispersed along the grain boundary. Among the tested samples, the as-deposited specimens exhibited the highest microhardness and good wear ability at room temperature; however, the wear resistance of the as-deposited sample obviously decreased at 250 °C. The mechanical properties of the specimens were not greatly improved by solution treatment or solution plus aging treatment. The sample subjected to annealing treatment exhibited excellent wear resistance both at room temperature and at a service temperature of 250 °C.

36 MATERIALS SCIENCE↗

Enhanced strength and electrical conductivity of ultrafine-grained Al-Mg-Si alloy processed by hydrostatic extrusion

Highlights: • Al-Mg-Si alloy was subjected to hydrostatic extrusion combined with aging treatment. • UFG Al-Mg-Si alloy with UTS of 332 MPa and conductivity of 58% IACS was obtained. • Precipitation process depended on applied strains and crystallographic texture. • Strengthening effect was achieved by UFG structure and needle-like β″ precipitates. • Precipitation of β″ and spherical β′/β particles at GB provided high conductivity. - Abstract: The effect of hydrostatic extrusion combined with an artificial aging on microstructure, mechanical and electrical properties of 6101 Al-Mg-Si alloy was investigated. It has been shown that such thermo-mechanical treatment is an effective method for producing of long wires with an ultrafine-grained microstructure (grain size of 300–400 nm) and enhanced ultimate tensile strength (> 330 MPa) and electrical conductivity (up to 58% IACS). The mechanical behavior of 6101 Al-Mg-Si alloy depended strongly on applied strains by hydrostatic extrusion and crystallographic texture. Higher accumulative strain accelerated the precipitation kinetics but decreased the age hardening response. The double fiber <100> and <111> texture was observed for hydrostatically extruded samples. The <001> grains with homogenously distributed needle-like β″ precipitates provided precipitation strengthening of material while <111> grains resulted in more efficient grain boundary strengthening. Quantitative microstructure characterization allowed adjusting physical model to estimate the electrical conductivity and compare it with experimental data. The high conductivity was provided mainly by decomposition of solid solution due to precipitation of needle-like β″ precipitates in the grain interior and spherical β′ or β particles located at grain boundaries.

36 MATERIALS SCIENCE↗

Local atomic structure of K{sub x}Na{sub (1−x)}NbO{sub 3} by total x-ray diffraction

Local atomic structure of K{sub x}Na{sub (1−x)}NbO{sub 3} with 0.0 ≤ x ≤ 1.0 was studied using atomic Pair Distribution Function analysis based on x-ray diffraction. Powdered crystals were found to exhibit a re-entrant behavior by being orthorhombic (Amm2) for x < 0.42, monoclinic (Pm) for 0.42 ≤ x ≤ 0.63 and again orthorhombic (Amm2) for x > 0.63. Non-centrosymmetric structure of NaNbO{sub 3} (Amm2) was also evident in the piezoresponse force microscopy analysis revealing the presence of the ferroelectric domains and switching behavior. Lowering of the crystallographic symmetry for 0.42 ≤ x ≤ 0.63 is discussed in terms of differences in the sizes of Na{sup +} and K{sup +} ions and Na–O and K–O bond lengths. Besides being a bridging phase, as suggested by the previous studies on lead-based compositions, present study suggests that lower symmetry monoclinic phase of compositionally disordered perovskite solid solutions could also be a manifestation of the difference in the sizes of constituent ions and bond lengths.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Copper-based alloys, crystallographic and crystallochemical parameters of alloys in binary systems Cu-Me (Me=Co, Rh, Ir, Cu, Ag, Au, Ni, Pd, Pt)

The article presents the results of the analysis of phase equilibrium of ordered phases in binary systems based on copper Cu- Me (where Me - Co, Rh, Ir, Ag, Au, Ni, Pd, Pt) to find correlations of crystallochemical and crystallographic factors. It is established that the packing index in disordered solid solutions in binary systems based on copper is close to the value of 0.74 against the background of an insignificant deviation of atomic volumes from the Zen’s law.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Carbon supersaturation of ferrite in a nanocrystalline bainitic steel

The extremely slow transformation kinetics of a nanocrystalline bainitic steel allows the carbon content of the bainitic ferrite away from any carbon-enriched regions such as dislocations and boundaries to be determined by atom probe tomography as the bainite transformation progresses at 200 C. A high level of carbon, well above that expected from para-equilibrium with austenite, has been detected in solid solution in bainitic ferrite at the early stage of transformation. Results provide strong evidence that bainite transformation is essentially displacive in nature so that the newly formed bainitic ferrite retains much of the carbon content of the parent austenite.

36 MATERIALS SCIENCE↗

Structural and Mössbauer spectroscopic study of Fe-Ni alloy nanoparticles

Nano-crystalline Fe-Ni alloys have been synthesized in ethylene glycol medium. Based on XRD studies it is confirmed that, in these alloys Fe atoms are incorporated at Ni site to form Ni-Fe solid solutions. Mössbauer studies have established that for alloy particles having smaller size there is significant concentration of two different types of paramagnetic Fe species and their relative concentration decreased with increase in particle size.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Cu Interlayer-Induced High-Strength Laser-Welded AISI 304 Steel-Niobium Joint

Joining niobium to austenitic stainless steel is necessary for the fabrication of particle accelerators. However, the brittle iron-niobium intermetallics formed in the joint significantly reduce the joint strength. Copper was used as an interlayer to prevent the brittle phase formation while joining niobium to AISI 304 steel. The laser beam was first focused on the Cu-steel faying surface and then on the Cu-Nb faying surface. The tensile strength of the joint is greater than that of the Nb. The weld microstructure consists of austenite with Cu-rich precipitates along with the austenitic grain boundaries and Cu-rich phase embedded with Nb-rich particles and dendrites. Solid solution strengthening of Cu by Fe and second-phase strengthening of Cu by Nb play a critical role in improving the mechanical properties of the joint. These results highlight new possibilities for the joining of niobium to steel.

36 MATERIALS SCIENCE↗

Tunable band gap in BiFe1 xMnxO3 films

In order to investigate band gap tunability in polar oxides, we measured the optical properties of a series of BiFe1 xMnxO3 thin films. The absorption response of the mixed metal solid solutions is approximately a linear combination of the characteristics of the two end members, a result that demonstrates straightforward band gap tunability in this system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamics of charge carrier recombination and capture in laser nanostructures with InGaAsSb/AlGaAsSb quantum wells

Time dynamics of photoluminescence intensity was studied in InGaAsSb/AlGaAsSb quantum wells with different compositions of the barrier solid solution and with different width of the quantum wells. The time of charge carrier capture in quantum wells, the energy relaxation times, lifetime related to resonant Auger recombination were estimated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure of Relaxor Ferroelectric (1 – 2х)BiScO{sub 3} · хPbTiO{sub 3} · хPbMg{sub 0.33}Nb{sub 0.67}O{sub 3} with х = 0.42 in the Polarized and Depolarized States

An X-ray diffraction study of ceramic samples of relaxor ferroelectric (1 – 2х)BiScO{sub 3} · хPbTiO{sub 3} · хPbMg{sub 0.33}Nb{sub 0.67}O{sub 3} with х = 0.42 in the polarized and depolarized states has been performed. It is established by Rietveld method that in both cases samples contain two perovskite-like phases, which are solid solutions. One of them has cubic symmetry. The second phase is characterized by the polar tetragonal sp. gr. P4mm in the polarized state and the monoclinic noncentrosymmetric sp. gr. Cm in the depolarized state.

36 MATERIALS SCIENCE↗

Extreme Spectroscopy: In situ nuclear materials behavior from optical data

In the nuclear industry, materials are regularly exposed to high temperature or/and irradiation and a better knowledge and understanding of their behavior under such extreme conditions is a key-point for improvements and further developments. Nowadays, Raman spectroscopy begins to be well known as a promising technique in the post mortem and remote characterization of nuclear materials exposed to extreme conditions. On this topic, at ANIMMA 2013 conference, we have presented some results about its implementation in the study of model or real nuclear fuel. However, the strength of Raman spectroscopy as in situ characterization tool is mainly its ability to be implemented remotely through optical fibers. Aware of this, implementation of other optical techniques can be considered in order to gain information not only on the structural dynamics of materials but also on the electronic charge carrier populations. In this paper, we propose to present our last advances in Raman characterization of nuclear materials and enlarge to the in situ use of complementary optical spectroscopies. Emphasis will be made on the information that can be gained to the behavior of the model fuel depleted UO{sub 2} under extreme conditions of high temperature and ionic irradiation: - In Situ Raman identification of the radiolysis alteration products of UO{sub 2} in contact with water under ionic irradiation. - In Situ Raman recording of the damaged dynamic of UO{sub 2} under inert atmosphere. - In Situ Raman and photo-luminescence study of virgin and damaged UO2 at high temperature. - In Situ study of electronic charge carriers' behavior in U{sub x}Th{sub 1-x}O{sub 2} solid solutions by mean of Iono- and Thermo- luminescence under and post- ionic irradiation. (authors)

36 MATERIALS SCIENCE↗

Crystal structure and magnetic properties and Zn substitution effects on the spin-chain compound Sr{sub 3}Co{sub 2}O{sub 6}

The effects of substituting Co on the spin-chain compound Sr{sub 3}Co{sub 2}O{sub 6} with Zn were investigated by synchrotron X-ray diffraction, magnetic susceptibility, isothermal magnetization, and specific heat measurements. To the best of our knowledge, this is the first report to describe the successful substitution of Co in Sr{sub 3}Co{sub 2}O{sub 6} with Zn. The substitution was carried out by a method involving high pressures and temperatures to obtain Sr{sub 3}CoZnO{sub 6}, which crystalized into a K{sub 4}CdCl{sub 6}-derived rhombohedral structure with a space group of R-3c, similar to the host compound. With the Zn substitution, the Ising-type magnetic anisotropy of the host compound remarkably reduced; the newly formed Sr{sub 3}CoZnO{sub 6} became magnetically isotropic with Heisenberg-type characteristics. This could probably be ascribed to the establishment of a different interaction pathway, –Co{sup 4+}(S=1/2)–O–Zn{sup 2+}(S=0)–O–Co{sup 4+}(S=1/2)–. Details of the magnetic properties of Zn substituted Sr{sub 3}Co{sub 2}O{sub 6} were reported. - Graphical abstract: Crystal structure of the spin-chain compound Sr{sub 3}CoZnO{sub 6} synthesized at 6 GPa. Zn atoms preferably occupy the trigonal prism sites rather than the octahedral sites. As a result, the compound is much magnetically isotropic. Highlights: • Effects of substituting Co with Zn on spin-chain magnetism of Sr{sub 3}Co{sub 2}O{sub 6} were studied. • High-pressure synthesis resulted in a solid solution of Sr{sub 3}CoZnO{sub 6}. • Sr{sub 3}CoZnO{sub 6} showed more isotropic magnetism than the host Sr{sub 3}Co{sub 2}O{sub 6}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

TEM observation of the heat-affected zone in electron beam welded superalloy Inconel 713C

The paper presents results of microstructural observations and phase analysis of electron-beam-welded fusion zones in superalloy Inconel 713C using transmission electron microscopy. In the fusion zone, a 90% fraction of fine-grained {gamma}' precipitates was found, with sizes up to 30 nm. No dislocations were observed in the precipitates or at the {gamma}-{gamma}' interface. Primary, undissolved inclusions of {gamma}' were found in the heat-affected zone (HAZ). In the HAZ, a very high concentration of dislocations was found at the {gamma}-{gamma}' boundaries, as well as inside the {gamma}' particles and in the {gamma} solid solution. The increased dislocation density indicates loss of coherence of that phase and the creation of a semi-coherent boundary, and is related to dissolution of the particles and intensified diffusion through the interphase {gamma}-{gamma}' boundary. The lattice misfit coefficient {delta}a/a between the {gamma}' particles and {gamma} solution in the HAZ indicates negative values from - 0.20% to - 0.06%. The presence of semi-coherent boundaries and the negative lattice misfit coefficient leads to dislocation locking and can result in cracking in the HAZ.

36 MATERIALS SCIENCE↗

Magnetic properties of spin frustrated spinel ZnFe{sub 2}O{sub 4}/ZnCr{sub 2}O{sub 4} superlattices

Superlattice films composed of frustrated spin systems, [ZnFe{sub 2}O{sub 4}]{sub m}/[ZnCr{sub 2}O{sub 4}]{sub m}, are grown on MgAl{sub 2}O{sub 4} (111) substrates by pulsed laser deposition, and their frustrated magnetism is studied. The superlattice films show spin-glass behavior and the spin-glass transition temperature (T{sub g}) varies nonmonotonically as a function of the layer thickness m. T{sub g} increases with decreasing m due to an increase in the inhomogeneous exchange interaction between Cr{sup 3+} and Fe{sup 3+} at the interface. However, below m = 4, a decrease in T{sub g} is observed. Compared with the solid solution Zn(CrFe)O{sub 4} film and the other superlattices, the decrease in T{sub g} is considered to be a unique property of the periodically modulated short period superlattices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystal structure and EPR study of Mn-doped {beta}-tricalcium phosphate

Mn-doped {beta}-tricalcium phosphate was prepared by solid state reaction at 1100 deg. C. The crystal structure of Ca{sub 2.85}Mn{sub 0.15}(PO{sub 4}){sub 2}, was determined by single crystal X-ray diffraction and found to be rhombohedral, R3c. Unit cell parameters are: a = 10.3419(3); c = 37.025(3) A (hexagonal setting), Z = 21. Structure refinement data show that from the five Ca positions the Ca(4) site is only half filled and that the Mn{sup 2+} ions occupy the hexacoordinated Ca(5) site solely. EPR spectroscopy reveals that manganese in solid solutions Ca{sub 3-x}Mn{sub x}(PO{sub 4}){sub 2} (x = 0.1; 0.28; 0.6) is divalent and supports the structure refinement results that Mn occupies the Ca(5) site with a geometry very near to a regular octahedron.

36 MATERIALS SCIENCE↗