Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “segregation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

The NBS: Processing/Microstructure/Property Relationships in 2024 Aluminum Alloy Plates

As received plates of 2024 aluminum alloy were examined. Topics covered include: solidification segregation studies; microsegregation and macrosegregation in laboratory and commercially cast ingots; C-curves and nondestructive evaluation; time-temperature precipitation diagrams and the relationships between mechanical properties and NDE measurements; transmission electron microscopy studies; the relationship between microstructure and properties; ultrasonic characterization; eddy-current conductivity characterization; the study of aging process by means of dynamic eddy current measurements; and Heat flow-property predictions, property degradations due to improve quench from the solution heat treatment temperature.

Ives, L. K.↗
NASA NTRS1982

Numerical simulation of crystal fractionation in shergottite meteorites

Cumulus clinopyroxenes in the Shergotty and Zagami meteorites suggest crystal fractionation occurred, possibly by gravitative settling. Numerical models of this process in a nonconvecting environment argue that the small phenocrysts can segregate only under extreme conditions of cooling time or gravitational field strength. Since textures indicate that cooling time was not excessive, a large (planetary) g is required by these models, in agreement with other suggestions that the shergottite parent body may be Mars. Other calculations indicate that it is extremely difficult to produce the observed textures in a convecting environment, unless crystal setting occurred in a quiescent zone at the bottom of the magma chamber.

Grimm, R. E.↗
NASA NTRS1982

Relict drainages, conical hills, and the eolian veneer in southwest Egypt - Applications to Mars

The fluvial and mass wasting origin of the particles in the eolian deposits, the segregation of these materials on the basis of grain size, and the migration of those particles capable of saltation to areas of accumulation in lowland basins of the Sahara are suggested as analogs for the formation and accumulation of 'sand' sheets and dunes on the northern plains and in the polar erg on Mars. Outliers of the Martian plateau in the fretted terrain are seen as having been dissected, at least initially, by channels whose upstream portions are incised in the uplands. The Martian 'wadis' possess many geomorphic peculiarities similar to those of the Gilf (Gilf Kebir Plateau, southwest Egypt) wadis, and like the Egyptian features they have been attributed to mass wasting. Even though basal sapping and removal of debris by wind have almost certainly modified the Martian features, their deep incision in the plateau and their inferred northward extensions in the northern plains are thought to require not only initial downcutting by fairly energetic streams but also prolonged and long-distance flow of water.

Breed, C. S.↗
NASA NTRS1983

A partially molten magma ocean model

Under the assumption that the outer 300-400 km of the moon was at first only partially, rather than fully molten, an explanation of the properties of the lunar crust and upper mantle is obtained according to which nuclei of anorthositic crust formed over localized bodies of magma segregated from the partial melt, and then grew peripherally until fully covering the moon. Over most of its growth period, the anorthosite crust floated on a layer of magma whose thickness was regulated by the opposing forces of (1) loss of material by fractional crystallization, and (2) addition of magma from the partial melt below. The clustering of Eu, Sr and Mg values found among pristine ferroan anorthosites are predicted by this model.

Shirley, D. N.↗
NASA NTRS1983

Viscous flow behavior of four iron-containing silicates with alumina, effects of composition and oxidation condition

The viscosity of a magma is an important parameter in connection with its effect on geologic processes such as melt segregation, magma vesiculation, and crystal fractionation. Though most models of geologic processes assume relatively low values for the magma viscosity less than 10,000 poise, it would be useful to have an empirical model for estimating viscosities when the process occurs during continuous cooling to a temperature region where the viscosity is expected to be very high. The considered work has been carried out to provide the experimental measurements of viscosity at low temperatures which would be used in formulating the empirical model. Ten iron-containing silicate compositions have been investigated by Klein et al. (1981), and four of these compositions have been selected for the present study with alumina. The study involves substitutions of Al2O3 for FeOx at Na2O/Al2O3 moles greater than one. For the four iron-containing silicate glasses with alumina, the viscosity at a given temperature is found to increase with increasing (Fe + Al).

Klein, L. C.↗
NASA NTRS1983

Mars - A contamination potential?

Three regions on Mars, Solis Lacus, Noachis-Hellespontus, and the Syrtis Major border areas, would appear to have generally less hostile environments than at the Viking lander sites. Significant soil moisture may extend to within about 1 cm of the surface. Water vapor pressures within the pore spaces may be near saturation, and brines may be physically segregated from pockets of relatively pure H2O. Temperatures reach above 0 C during southern spring and summer, with peak temperatures reaching +22 C. These regions should contain fewer oxidants, and primary synthesis of organics may occur. The potential for contamination of these sites by microbes transported from existing spacecraft should be assessed. The adequacy of proposed new planetary protection procedures for possible future United States Mars Surface Sample Return missions should also be assessed in light of these findings.

Huguenin, R. L.↗
NASA NTRS1985

Wire-Identification Instrument

Instrument automatically tests each wire in multiwire cable and identifies specified wire to be segregated or labeled and locates wire connected to specified connector pin. Instrument made with readily available CMOS integrated circuits. More efficient and reliable than conventional continuity testers and less expensive than computer controlled units.

Lonborg, J. O.↗
NASA NTRS1984

Mechanical contact induced transformation from the amorphous to the crystalline state in metallic glass

Friction and wear tests were conducted with 3.2- and 6.4-millimeter-diameter aluminum oxide spheres sliding, in reciprocating motion, on a Fe67Co18B14Si1 metallic foil. Crystallites with a size range of 10 to 150 nanometers were produced on the wear surface of the amorphous alloy. A strong interaction between transition metals and metalloids such as silicon and boron results in strong segregation during repeated sliding, provides preferential transition metal-metalloid clustering in the amorphous alloy, and subsequently produces the diffused honeycomb structure formed by dark grey bands and primary crystals, that is, alpha-Fe in the matrix. Large plastic flow occurs on an amorphous alloy surface with sliding and the flow film of the alloy transfers to the aluminum oxide pin surface. Multiple slip bands due to shear deformation are observed on the side of the wear track. Two distinct types of wear debris were observed as a result of sliding: an alloy wear debris, and/or powdery-whiskery oxide debris.

Miyoshi, K.↗
NASA NTRS1984

A study of the solidification parameters influencing structures and properties in MAR-M246(Hf)

The nickel-base superalloy MAR-246(Hf) was studied to determine the factors affecting basic morphology and fatigue properties. Of particular interest was the degradation of fatigue properties with deviation from the 001 growth orientation. Examination of directionally solidified samples showed a dependence of carbide shape and interdentritic segregation on growth rate. Heat treatment studies focused on the gamma prime structure, determining that it reaches maximum growth after twenty-four hours but its size and stability depends on the temperature of the treatment. Fatigue test specimens were oriented crystallographically in the failed and unfailed regions and found to have rotated their orientation during the testing if they were located a significant distance from 001. This would place increased strain on the crystal and precipitate early failure.

Johnston, M. H.↗
NASA NTRS1983

V/STOL model fan stage rig design report

A model single-stage fan with variable inlet guide vanes (VIGV) was designed to demonstrate efficient point operation while providing flow and pressure ratio modulation capability required for a V/STOL propulsion system. The fan stage incorporates a split-flap VIGV with an independently actuated ID flap to permit independent modulation of fan and core engine airstreams, a flow splitter integrally designed into the blade and vanes to completely segregate fan and core airstreams in order to maximize core stream supercharging for V/STOL operation, and an EGV with a variable leading edge fan flap for rig performance optimization. The stage was designed for a maximum flow size of 37.4 kg/s (82.3 lb/s) for compatibility with LeRC test facility requirements. Design values at maximum flow for blade tip velocity and stage pressure ratio are 472 m/s (1550 ft/s) and 1.68, respectively.

Cheatham, J. G.↗
NASA NTRS1984

Importance and Definition of Materials in Tribology. Status of Understanding

In general, tribological systems consist of three basic components: the material surfaces in contact, the lubricant, and the environment. The materials in contact and the influence of both bulk and surface properties, indicating the importance of material characterization, on tribological behavior are addressed. Since metals and metallic alloys are the most widely used class of materials in practical devices, attention is focused principally on them. With respect to surface behavior, the effect of contaminants both from within the material and from the environment on adhesive behavior is addressed. The various surface events that alter adhesion, friction, and wear are discussed. These include surface reconstruction, segregation, chemisorption, and compound formation. Examples of these events are presented. Minor nuances in the structure of the outermost layers of solids have a pronounced effect on tribological properties. The importance of characterizing the materials of solids in contact in order to achieve a fundamental understanding of adhesion, friction, and wear and accordingly of methods for their control are addressed.

Buckley, D. H.↗
NASA NTRS1984

Overview of Bulk Silicon Crystal Growth

The Czochralski and float-zone techniques are reviewed and the consequences of high growth rates in the growth of electronic grade silicon are examined. Impurity segregation coefficients are defined.

Source record↗
NASA NTRS1984

Use of the Burton-prim-slichter Equation at High Growth Rates

The following must be assumed in order to derive the classic Burton-Prim-Slichter equation for segregation during crystal growth: isobaric, isothermal, isopotential or uncharged species, binary, planar interface, steady state, constant diffusion coefficient in fluid, no diffusion in crystal, no lateral convection within fluid film at interface with complete mixing beyond (stagnant film model), and either density, total concentration or partial molar volumes constant in the fluid phase. In addition, the effective distribution coefficient and the interfacial distribution coefficient must be defined properly. The velocity in the equation is the growth rate times a factor correcting for the difference in volumetric properties between crystal and fluid. The stagnant film thickness is found to be a function of freezing rate, with the precise functionality depending on the type of stirring occurring in the growth fluid.

Wilcox, W. R.↗
NASA NTRS1984

Models of Rapid Solidification

Laser annealing studies provide much information on various consequences of rapid solidification, including the trapping of impurities in the crystal, the generation of vacancies and twins, and on the fundamental limits to the speed of the crystal-melt interface. Some results obtained by molecular dynamics methods of the solidification of a Lennard-Jones liquid are reviewed. An indication of the relationship of interface speed to undercooling for certain materials can be derived from this model. Ising model simulations of impurity trapping in silicon are compared with some of the laser annealing results. The consequences of interface segregation and atomic strain are discussed.

Gilmer, G. H.↗
NASA NTRS1984

Solidification structures grown under induced flow and continuous casting of steel

The use of induced flow as a means to control solidification structures in strand cast steel is investigated. The quality problems in strand cast steel stemming from columnar growth can be partially controlled, by Electro Magnetic Stirring (EMS). Induced flow changes the normal morphology of dendrites. Solids grown under intense stirring conditions show both negative and positive segregation which is considered unacceptable by some steel producers. The inclusion size and population is strongly affected by induced flow (EMS). Laboratory and industrial data show substantial reduction in inclusion size and content, but the overall effect of flow on inclusions is affected by the particular type of flow patterns utilized in each case. Productivity and quality are raised substantially in steel strand casting by utilizing EMS.

Tsavaras, A. A.↗
NASA NTRS1984

The role of material properties in adhesion

When two solid surfaces are brought into contact strong adhesive bond forces can develop between the materials. The magnitude of the forces will depend upon the state of the surfaces, cleanliness and the fundamental properties of the two solids, both surface and bulk. Adhesion between solids is addressed from a theoretical consideration of the electronic nature of the surfaces and experimentally relating bond forces to the nature of the interface resulting from solid state contact. Surface properties correlated with adhesion include, atomic or molecular orientation, reconstruction and segregation as well as the chemistry of the surface specie. Where dissimilar solids are in contact the contribution of each is considered as is the role of their interactive chemistry on bond strength. Bulk properties examined include elastic and plastic behavior in the surficial regions, cohesive binding energies, crystal structure, crystallographic orientation and state. Materials examined with respect to interfacial adhesive interactions include metals, alloys, ceramics, polymers and diamond. They are reviewed both in single and polycrystalline form. The surfaces of the contacting solids are studied both in the atomic or molecularly clean state and in the presence of selected surface contaminants.

Buckley, D. H.↗
NASA NTRS1983

Photochemistry of methane in the earth's early atmosphere

The photochemical behavior of methane in the early terrestrial atmosphere is investigated with a detailed model in order to determine how much CH4 might have been present and what types of higher hydroocarbons could have been formed. It is found that any primordial methane accumulated during the course of earth accretion would have been dissipated by photochemical reactions in the atmosphere in a geologically short period of time after the segregation of the core. Abiotic sources of methane are not likely to have been large enough to sustain CH4 mixing ratios as high as 10 to the -6th, the threshold for a possible methane greenhouse, with a CO-rich atmosphere being a possible exception. After the origin of life an increasing biogenic source of methane may have driven CH4 mixing ratios well above 10 to the 6th. The rise of atmospheric oxygen in the early Proterozoic may have led to a more rapid photochemical destruction of methane, lowering the mixing ratio to its present value.

Kasting, J. F.↗