Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “relaxation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Accelerated heat-aging studies on fluororubber in various media

Heat-aging studies were conducted on fluororubber (copolymers of vinylidene fluoride and perfluoropropylene) using N,N-dicinnamylidene-1,6-hexanediamine, a Schiff's base of 1,6-hexanediamine, and MgO as acid acceptor. The principal technique employed was chemical stress relaxation for determining network changes brought about in the heat-aged fluororubber. This technique was backed up by swelling measurements, gel permeation chromatography, and IR spectroscopy. Stress relaxation curves are plotted for a wide range of variation in parameters (time, crosslinking density, state of curing, temperature, intermittent and continuous relaxation).

Kalfayan, S. H.↗
NASA NTRS1977

A new method for predicting response in complex linear systems. II

The paper describes convergence and response studies in the low frequency range of complex systems, particularly with low values of damping of different distributions, and reports on the modification of the relaxation procedure required under these conditions. A new method is presented for response estimation in complex lumped parameter linear systems under random or deterministic steady state excitation. The essence of the method is the use of relaxation procedures with a suitable error function to find the estimated response; natural frequencies and normal modes are not computed. For a 45 degree of freedom system, and two relaxation procedures, convergence studies and frequency response estimates were performed. The low frequency studies are considered in the framework of earlier studies (Kayser and Bogdanoff, 1975) involving the mid to high frequency range.

Bogdanoff, J. L.↗
NASA NTRS1978

Pulsed NMR spectroscopy

Method gives results approximating those of classical continuous-irradiation method but in less time. Method also makes it possible to measure chemical shifts and spin-lattice relaxation times with improved sensitivity. Equipment can be used for adiabatic demagnetization experiments, measurements of rotating-frame spin/lattice relaxation times, and accurate measurements of exact resonance points. When measuring relaxation times, pulse technique can be very effective since pulses may be limited in amplitude and length to prevent spin system from being driven into saturation.

Burum, D. P.↗
NASA NTRS1977

Reduced variable technique for predicting grain behavior

The use of reduced variables to account for the time-temperature dependence of the relaxation modulus is a standard and universally adopted technique in the stress analysis of solid propellant grains. Recent work has suggested that the reduced variable technique can also be used to account for the dependence of the relaxation modulus on the crosslink density of an elastomer system. By combining variables, it is now possible to determine the relaxation modulus as a function of both mechanical and chemical parameters over a long period of time. The problems involved, the pitfalls to be avoided, and suggested techniques to be used in acquiring data are discussed.

Lewis, G. W.↗
NASA NTRS1978

Photochemical-radiative damping and instability in the stratosphere. II Numerical results

In a paper by Strobel (1977), opacity effects on the joint photochemical-radiative relaxation in the stratosphere were evaluated by a linear perturbation analysis. Significant reductions in the photochemical acceleration of the thermal relaxation rate and the ozone photochemical relaxation rate were obtained in the upper stratosphere as a result of opacity changes. For very large vertical scale height ozone density perturbations, amplifying solutions were generated by large opacity changes in the O3 dissociation and heating rates. Such solutions could indicate that the stratosphere does not possess an equilibrium ozone concentration. In the present paper, some illustrative numerical calculations are presented to demonstrate the properties of the amplifying solutions. The results indicate that ungeophysically large disturbances are required and that they cease growth before attainment of geophysically interesting amplitudes, and decay to the unperturbed state.

Strobel, D. F.↗
NASA NTRS1978

The development of methods for the prediction of primary creep behavior in metals

The applicability of a thermodynamic constitutive theory of deformation to the prediction of primary creep and creep strain relaxation behavior in metals is examined. Constitutive equations derived from the theory are subjected to a parametric analysis in order to determine the influence of several parameters on the curve forms generated by the equations. A computer program is developed which enables the solution of a generalized constitutive equation using experimental data as input. Several metals were tested to form a data base of primary creep and relaxation behavior. The extent to which these materials conformed to the constitutive equation showed wide variability, with the alloy Ti-6Al-4V exhibiting the most consistent results. Accordingly, most of the analysis is concentrated upon data from that alloy, although creep and relaxation data from all the materials tested are presented. Experimental methods are outlined as well as some variations in methods of analysis. Various theoretical and practical implications of the work are discussed.

Zerwekh, R. P.↗
NASA NTRS1979

Effect of misalignment on mechanical behavior of metals in creep

Application of the endochronic theory of viscoplasticity to creep, creep recovery, and stress relaxation at the small strain and short time range produced the following results: (1) The governing constitutive equations for constant-strain-rate stress-strain behavior, creep, creep recovery, and stress relaxation were derived by imposing appropriate constraints on the general constitutive equation of the endochronic theory. (2) A set of material constants was found which correlate strain-hardening, creep, creep recovery, and stress relaxation. (3) The theory predicts with reasonable accuracy the creep and creep recovery behaviors at short time. (4) The initial strain history prior to the creep stage affects the subsequent creep significantly. (5) A critical stress was established for creep recovery. A computer program, written for the misalignment problem is reported.

Wu, H. C.↗
NASA NTRS1979

Postseismic viscoelastic surface deformation and stress. Part 1: Theoretical considerations, displacement and strain calculations

A model of viscoelastic deformations associated with earthquakes is presented. A strike-slip fault is represented by a rectangular dislocation in a viscoelastic layer (lithosphere) lying over a viscoelastic half-space (asthenosphere). Deformations occur on three time scales. The initial response is governed by the instantaneous elastic properties of the earth. A slower response is associated with viscoelastic relaxation of the lithosphere and a yet slower response is due to viscoelastic relaxation of the asthenosphere. The major conceptual contribution is the inclusion of lithospheric viscoelastic properties into a dislocation model of earthquake related deformations and stresses. Numerical calculations using typical fault parameters reveal that the postseismic displacements and strains are small compared to the coseismic ones near the fault, but become significant further away. Moreover, the directional sense of the deformations attributable to the elastic response, the lithospheric viscoelastic softening, and the asthenospheric viscoelastic flow may differ and depend on location and model details. The results and theoretical arguments suggest that the stress changes accompanying lithospheric relaxation may also be in a different sense than and be larger than the strain changes.

Cohen, S. C.↗
NASA NTRS1980

Effect of immobilization on the EEG of the baboon. Comparison with telemetry results from unrestricted animals

The EEG of the baboon was studied under two very different sets of conditions: 37 were totally immobolized while 12 were studied in their free movements with 4 channel telemetry. For the immobilzed, 3 stages were described: (1) activation, record desynchronized; (2) rest with 13-15 cm/sec rhythm, like the human alpha rhythm stage but with eyes open or closed; (3)relaxation with a decrease in 13-15 rhythm and the appearance of 5-7 cm/sec theta waves, eyelids closed, animal apparently sleeping. For the free animals the rest stage appeared when the animal's attention was not directed anywhere and there was no relaxation stage. It is concluded that the EEG pattern of the immobilized animal that was described as the "relaxation" stage really represents a special functional state which one must distinguish clearly from the physiological stages of sleep.

Bert, J.↗
NASA NTRS1980

Application of the multigrid method to grid generation

The multigrid method (MGM), used to numerically solve the pair of nonlinear elliptic equations commonly used to generate two dimensional boundary-fitted coordinate systems is discussed. Two different geometries are considered: one involving a coordinate system fitted about a circle and the other selected for an impinging jet flow problem. Two different relaxation schemes are tried: one is successive point overrelaxation and the other is a four-color scheme vectorizeable to take advantage of a parallel processor computer for greater computational speed. Results using MGM are compared with those using SOR (doing successive overrelaxations with the corresponding relaxation scheme on the fine grid only). It is found that MGM becomes significantly more effective than SOR as more accuracy is demanded and as more corrective grids, or more grid points, are used. For the accuracy required, it is found that MGM is two to three times faster than SOR in computing time. With the four-color relaxation scheme as applied to the impinging jet problem, the advantage of MGM over SOR is not as great. This may be due to the effect of a poor initial guess on MGM for this problem.

Ohring, S.↗
NASA NTRS1982

The injection of energy into the Io plasma torus

Voyager EUV observations of the Io plasma torus indicate the presence of an intensity modulation in the corotating reference frame of significant magnitude on a 10-hour time scale. The phenomenon has a persistence which suggests it is a permanent feature, and the magnitude is such that a substantial amount of energy is injected into the torus at a 10-hour periodic rate. An investigation is conducted regarding the nature of the energy enjection process as determined by the plasma parameters and the observed characteristics. Attention is given to excitation-relaxation relations, aspects of ion-electron relaxation, and electron-electron relaxation and energy transfer rates. The radial distribution of temperature at the eastern and western elongations is found to indicate that the energy input to the electrons is distributed over the width of the torus. The dominant mechanism of energy transport to the plasma appears to be electron-electron heating.

Shemansky, D. E.↗
NASA NTRS1982

A means for utilizing ancillary information in multispectral classification

Attention is given to a method which makes it possible to incorporate information from ancillary data sources into the results of an existing classification of remotely sensed data. The method is based upon probabilistic label relaxation procedures which are used for imbedding spatial context data in image-labeling problems. The source of ancillary information is utilized in the form of a set of probabilities. These are introduced into a modified relaxation method called supervised relaxation labeling which, on application, develops a labeling for remotely sensed data that strikes a balance in consistency between spectral, spatial, and ancillary data sources of information. A description is given of results of a forestry classification in which accuracy is improved from 68% to 81% by incorporating topographic elevation in the outlined manner.

Richards, J. A.↗
NASA NTRS1983

Interpulse kinetics in copper and copper halide lasers

The various rate processes that govern the interpulse relaxation in metal vapor and metal halide vapor lasers are considered. Computer calculations indicate that the rapid metastable levels relaxation observed in copper and copper halide laser experiments requires the existence of a relatively small resonance in the cross section for metastable excitation or deexcitation near threshold. The accurate calculation of interpulse relaxation requires knowledge of rate constants presently not well known; this is especially so for metal halide lasers.

Harstad, K. G.↗
NASA NTRS1984

On the detection of underwater bottom topography by imaging radars

A theoretical model which explains basic properties of radar imaging of underwater bottom topography in tidal channels is presented. The surface roughness modulation is described by weak hydrodynamic interaction theory in the relaxation time approximation. In contrast to previous theories on short wave modulation by long ocean waves, a different approximation is used to describe short wave modulation by tidal flow over underwater bottom topography. The modulation depth is proportional to the relaxation time of the Bragg waves. The large modulation of radar reflectivity observed in SEASAT-SAR imagery of sand banks in the Southern Bight of the North Sea are explained by assuming that the relaxation time of 34 cm Bragg waves is of the order of 30-40 seconds.

Alpers, W.↗
NASA NTRS1980

Development and flight evaluation of an augmented stability active controls concept with a small tail

Parasite drag reduction evaluation is composed of wind tunnel tests with a standard L-1011 tail and two reduced area tail configurations. Trim drag reduction is evaluated by rebalancing the airplane for relaxed static stability. This is accomplished by pumping water to tanks in the forward and aft of the airplane to acheive desired center of gravity location. Also, the L-1011 is modified to incorporate term and advanced augmented systems. By using advanced wings and aircraft relaxed static stability significant fuel savings can be realized. An airplane's dynamic stability becomes more sensitive for decreased tail size, relaxed static stability, and advanced wing configurations. Active control pitch augmentation will be used to acheive the required handling qualities. Flight tests will be performed to evaluate the pitch augmentation systems. The effect of elevator downrig on stabilizer/elevator hinge moments will be measured. For control system analysis, the normal acceleration feedback and pitch rate feedback are analyzed.

Source record↗
NASA NTRS1984

Microwave signature of thick-target electron beams in solar flares

The steady-state behavior of a flux of nonthermal electrons injected into a fully ionized thick target is examined. Owing to the (inverse square) energy dependence of the Coulomb collisional cross section, it is found that injected electron distributions that are monotonically decreasing functions of electron energy develop at finite depths into distributions that have 'humps' in velocity space; the electron energy corresponding to the hump correlates with the overlying particle column density to the target. This results in a two-stream unstable situation. The distribution is constantly being relaxed by quasi-linear relaxation and re-created by collisions; in this way a steady nonthermal level of Langmuir plasma waves is created, and these waves in turn produce microwave plasma radiation with a typical flux of 3 x 10 to the -16th erg/sq cm-sec. This flux can be enhanced by a factor of up to 100 by a high level of low-frequency (such as ion-acoustic) turbulence, which prevents quasi-linear relaxation for a sufficient fraction of the path length.

Emslie, A. G.↗
NASA NTRS1984

Low-frequency sound absorption measurements in air

Thirty sets of sound absorption measurements in air at a pressure of 1 atmosphere are presented at temperatures from 10 C to 50 C, relative humidities from 0 to 100 percent, and frequencies from 10 to 2500 Hz. The measurements were conducted by the method of free decay in a resonant tube having a length of 18.261 m and bore diameter of 0.152 m. Background measurements in a gas consisting of 89.5 percent N2 and 10.5 percent Ar, a mixture which has the same sound velocity as air, permitted the wall and structural losses of the tube to be separated from the constituent absorption, consisting of classical rotational and vibrational absorption, in the air samples. The data were used to evaluate the vibrational relaxation frequencies of N2 and/or O2 for each of the 30 sets of meteorological parameters. Over the full range of humidity, the measured relaxation frequencies of N2 in air lie between those specified by ANSI Standard S1.26-1978 and those measured earlier in binary N2H2O mixtures. The measured relaxation frequencies could be determined only at very low values of humidity, reveal a significant trend away from the ANSI standard, in agreement with a prior investigation.

Zuckerwar, A. J.↗
NASA NTRS1984

Toughening mechanism in elastomer-modified epoxy resins, part 2

The role of matrix ductility on the toughenability and toughening mechanism of elastomer-modified DGEBRA epoxies was investigated. Matrix ductility was varied by using epoxide resins of varying epoxide monomer molecular weights. These epoxide resins were cured using 4,4' diaminodiphenyl sulfone (DDS) and, in some cases, modified with 10% HYCAR(r)CTBN 1300X8. Fracture roughness values for the neat epoxies were found to be almost independent on the monomer molecular weight of the epoxide resin used. However, it was found that the fracture toughness of the elastomer-modified epoxies was very dependent upon the epoxide monomer molecular weight. Tensile dilatometry indicated that the toughening mechanism, when present, is similar to the mechanisms found for the piperidine cured epoxies in Part 1. SEM and OM corroborate this finding. Dynamic mechanical studies were conducted to shed light on the toughenability of the epoxies. The time-dependent small strain behavior of these epoxies were separated into their bulk and shear components. The bulk component is related to brittle fracture, whereas the shear component is related to yielding. It can be shown that the rates of shear and bulk strain energy buildup for a given stress are uniquely determined by the values of Poisson's ratio, nu. It was found that nu increases as the monomer molecular weight of the epoxide resin used increases. This increase in nu can be associated with the low temperature beta relaxation. The effect of increasing cross-link density is to shift the beta relaxation to higher temperatures and to decrease the magnitude of the beta relaxation. Thus, increasing cross-link density decreases nu and increases the tendency towards brittle fracture.

Yee, A. F.↗