Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantum matter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Thermodynamic signatures of an antiferromagnetic quantum critical point inside a superconducting dome

Recent experiments in unconventional superconductors, and in particular iron-based materials, have reported evidence of an antiferromagnetic quantum critical point (AFM-QCP) emerging inside the superconducting dome of the phase diagram. Fluctuations associated with such an AFM-QCP are expected to promote unusual temperature dependencies of thermodynamic quantities. Here, we compute the T dependence of the specific heat C(T) deep inside a fully gapped s +– superconducting state as the AFM-QCP is approached. We find that at the AFM-QCP, the specific heat C(T) vanishes quadratically with temperature, as opposed to the typical exponential suppression seen in fully gapped BCS superconductors. This robust result is due to a nonanalytic contribution to the free energy arising from the general form of the bosonic (AFM) propagator in the SC state. Away from the AFM-QCP, as temperature is lowered, C(T) shows a crossover from a T2 behavior to an exponential behavior, with the crossover temperature scale set by the value of the superconducting gap and the distance to the QCP. As a result, we argue that these features in the specific heat can be used to unambiguously determine the existence of AFM-QCPs inside the superconducting domes of iron-based and other fully gapped unconventional superconductors.

36 MATERIALS SCIENCE↗

Symmetry breaking forms split-off flat bands in quantum oxides controlling metal versus insulator phases

The crystal structure used as input to electronic structure calculation of conventionally bonded solids consists primarily of the standard crystallographic degrees of freedom. Quantum solids sometimes have additional microscopic degrees of freedom (m-DOF) nested within the crystallographic structure. These might include local motifs including positional (Peierls dimers, deformed octahedra, Jahn-Teller distortions), magnetic (local moment configurations) and dipolar (local ferroelectric configurations). Such motifs can be observed experimentally via local probes that avoid averaging, and theoretically as distinct total energy lowering features relative to more simplified “average crystallographic structures”. Here we examine the ability of electronic structure methods independent of strong correlation physics to explain the broad phenomenology of metal-insulator selectivity in quantum oxides by energy-lowering symmetry breaking. We do this by avoiding the restriction of considering only (i) electron-electron interactions in a fixed unresponsive lattice—as done in Mott strong correlation explanations—allowing, however, (ii) local positional and magnetic motifs that coexist within a crystallographic landscape. We find in a broad range of quantum oxides with different symmetry breaking modes the formation of split-off flat bands that can also control metallic versus insulating characteristics. The split-off band effect is common to magnetic and non-magnetic materials, including both binary and ternary oxides. One finds that when such local symmetry breaking motifs are considered in mean-field-like (e.g. density functional theory) electronic structure calculations of quantum oxides, they explain many of the observed trends in metal vs insulator phases discussed otherwise in prior literature via strong correlation in symmetry unbroken view.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interfacially Enhanced Superconductivity in Fe(Te,Se)/Bi 4 Te 3 Heterostructures

Realizing topological superconductivity by integrating high-transition-temperature (T C ) superconductors with topological insulators can open new paths for quantum computing applications. Here, a new approach is reported for increasing the superconducting transition temperature $T^{onset}_C$ by interfacing the unconventional superconductor Fe(Te,Se) with the topological insulator Bi–Te system in the low-Se doping regime, near where superconductivity vanishes in the bulk. The critical finding is that the $T^{onset}_C$ of Fe(Te,Se) increases from nominally non-superconducting to as high as 12.5 K when Bi 2 Te3 is replaced with the topological phase Bi 4 Te 3 . Interfacing Fe(Te,Se) with Bi4Te3 is also found to be critical for stabilizing superconductivity in monolayer films where $T^{onset}_C$ can be as high as 6 K. Measurements of the electronic and crystalline structure of the Bi 4 Te 3 layer reveal that a large electron transfer, epitaxial strain, and novel chemical reduction processes are critical factors for the enhancement of superconductivity. This novel route for enhancing T C in an important epitaxial system provides new insight on the nature of interfacial superconductivity and a platform to identify and utilize new electronic phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spatial quantum-interference landscapes of multi-site-controlled quantum dots coupled to extended photonic cavity modes

Abstract A compact platform to integrate emitters in a cavity-like support is to embed quantum dots (QDs) in a photonic crystal (PhC) structure, making them promising candidates for integrated quantum photonic circuits. The emission properties of QDs can be modified by tailored photonic structures, relying on the Purcell effect or strong light-matter interactions. However, the effects of photonic states on spatial features of exciton emissions in these systems are rarely explored. Such effect is difficult to access due to random positions of self-assembled QDs in PhC structures, and the fact that quantum well excitons’ wavefunctions resemble photonic states in a conventional distributed Bragg reflector cavity system. In this work, we instead observe a spatial signature of exciton emission using site-controlled QDs embedded in PhC cavities. In particular, we observe the detuning-dependent spatial repulsion of the QD exciton emissions by polarized imaging of the micro-photoluminescence, dependent on the controlled QD’s position in a spatially extended photonic pattern. The observed effect arises due to the quantum interference between QD decay channel in a spatially-extended cavity mode. Our findings suggest that integration of site-controlled QDs in tailored photonic structures can enable spatially distributed single-photon sources and photon switches.

Physics↗

Chiral-Symmetric Higher-Order Topological Phases of Matter

Herein, we introduce novel higher-order topological phases of matter in chiral-symmetric systems (class AIII of the tenfold classification), most of which would be misidentified as trivial by current theories. These phases are protected by “multipole chiral numbers,” bulk integer topological invariants that in 2D and 3D are built from sublattice multipole moment operators, as defined herein. The integer value of a multipole chiral number indicates how many degenerate zero-energy states localize at each corner of a system. These higher-order topological phases of matter are generally boundary-obstructed and robust in the presence of chiral-symmetry-preserving disorder.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Witnessing entanglement in quantum magnets using neutron scattering

We demonstrate how quantum entanglement can be directly witnessed in the quasi-1D Heisenberg antiferromagnet KCuF 3 . We apply three entanglement witnesses—one tangle, two tangle, and quantum Fisher information—to its inelastic neutron spectrum and compare with spectra simulated by finite-temperature density matrix renormalization group (DMRG) and classical Monte Carlo methods. We find that each witness provides direct access to entanglement. Of these, quantum Fisher information is the most robust experimentally and indicates the presence of at least bipartite entanglement up to at least 50 K, corresponding to around 10% of the spinon zone-boundary energy. We apply quantum Fisher information to higher spin-S Heisenberg chains and show theoretically that the witnessable entanglement gets suppressed to lower temperatures as the quantum number increases. Finally, we outline how these results can be applied to higher dimensional quantum materials to witness and quantify entanglement.

1-dimensional systems↗

Highly efficient photon detection systems for noble liquid detectors based on perovskite quantum dots

Abstract Wavelength shifting photon detection systems (PDS) are the critical functioning components in noble liquid detectors used for high energy physics (HEP) experiments and dark matter search. The vacuum ultraviolet (VUV) scintillation light emitted by these Liquid argon (LAr) and liquid Xenon (LXe) detectors are shifted to higher wavelengths resulting in its efficient detection using the state-of-the-art photodetectors such as silicon photomultipliers (SiPM). The currently used organic wavelength shifting materials [such as 1,1,4,4 Tetraphenyl Butadiene (TPB)] have several disadvantages and are unreliable for longterm use. In this study, we demonstrate the application of the inorganic perovskite cesium lead bromide (CsPbBr 3 ) quantum dots (QDs) as highly efficient wavelength shifters. The absolute photoluminescence quantum yield of the PDS fabricated using these QDs exceeds 70%. CsPbBr 3 -based PDS demonstrated an enhancement in the SiPM signal enhancement by up to 3 times when compared to a 3 µm-thick TPB-based PDS. The emission spectrum from the QDs was optimized to match the highest quantum efficiency region of the SiPMs. In addition, we have demonstrated the deposition of the QD-based wavelength shifting material on a large area PDS substrate using low capital cost and widely scalable solution-based techniques providing a pathway appropriate for meter-scale PDS fabrication and widespread use for other wavelength shifting applications.

47 OTHER INSTRUMENTATION↗

Edge magnetoplasmon dispersion and time-resolved plasmon transport in a quantum anomalous Hall insulator

A quantum anomalous Hall (QAH) insulator breaks reciprocity by combining magnetic polarization and spin-orbit coupling to generate a unidirectional transmission of signals in the absence of an external magnetic field. Such behavior makes QAH materials a good platform for the innovation of circulator technologies. However, it remains elusive as to how the wavelength of the chiral edge plasmon relates to its frequency and how the plasmon wave packet is excited in the time domain in a QAH insulator. Here, we investigate the edge magnetoplasmon (EMP) resonances in Cr-(Bi,Sb) 2 Te 3 by frequency and time domain measurements. From disk shaped samples with various dimensions, we obtain the dispersion relation of EMPs and extract the drift velocity of the chiral edge state. From the time-resolved transport measurements, we identify the velocity of the plasmon wave packet and observe a transition from the edge to bulk transport at an elevated temperature. We show that the frequency and time domain measurements are well modeled by loss from the microwave induced dissipative channels in the bulk area. Our results demonstrate that the EMP decay rate can be significantly reduced by applying a low microwave power and fabricating devices of larger diameter ≥ 100 µ m . In a R = 125 µ m sample, a nonreciprocity of 20 dB has been realized at 1.3 GHz, shining light on using QAH insulators to develop on-chip nonreciprocal devices. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strange quark matter as dark matter: 40 yr later, a reappraisal

ABSTRACT Forty years ago Witten suggested that dark matter could be composed of macroscopic clusters of strange quark matter. This idea was very popular for several years, but it dropped out of fashion once lattice quantum chromodynamics calculations indicated that the confinement/deconfinement transition, at small baryonic chemical potential, is not first order, which seemed to be a crucial requirement in order to produce large clusters of quarks. Here, we revisit the conditions under which strangelets can be produced in the Early Universe. We discuss the impact of an instability in the hadronic phase separating a low density, positive-strange-charge phase from a high-density phase with a negative strange charge. This second phase can rapidly stabilize by forming colour-superconducting gaps. The strangelets then undergo partial evaporation. In this way, we obtain distributions of their sizes in agreement with the observational constraints and we discuss the many astrophysical and cosmological implications of these objects. Finally, we examine the most promising techniques to detect this type of strangelets. We also show that strangelets can exist with masses $\lesssim $1017 g, while primordial black holes are ruled out in that mass range, allowing us to distinguish between these two dark matter candidates.

Clemente, Francesco Di (ORCID:0000000282573819)↗

Site-Specific Structure at Multiple Length Scales in Kagome Quantum Spin Liquid Candidates

Realizing a quantum spin liquid (QSL) ground state in a real material is a leading issue in condensed matter physics research. In this pursuit, it is crucial to fully characterize the structure and influence of defects, as these can significantly affect the fragile QSL physics. In this work, we perform a variety of cutting-edge synchrotron x-ray scattering and spectroscopy techniques, and we advance new methodologies for site-specific diffraction and L-edge Zn absorption spectroscopy. The experimental results along with our first-principles calculations address outstanding questions about the local and long-range structures of the two leading kagome QSL candidates, Zn-substituted barlowite Cu 3 Zn x Cu 1-x (OH) 6 FBr and herbertsmithite Cu 3 Zn(OH) 6 Cl 2 . On all length scales probed, there is no evidence that Zn substitutes onto the kagome layers, thereby preserving the QSL physics of the kagome lattice. Our calculations show that antisite disorder is not energetically favorable and is even less favorable in Zn-barlowite compared to herbertsmithite. Site-specific x-ray diffraction measurements of Zn-barlowite reveal that Cu 2+ and Zn 2+ selectively occupy distinct interlayer sites, in contrast to herbertsmithite. Using the first measured Zn L-edge inelastic x-ray absorption spectra combined with calculations, we discover a systematic correlation between the loss of inversion symmetry from pseudo-octahedral (herbertsmithite) to trigonal prismatic coordination (Zn-barlowite) with the emergence of a new peak. Overall, our measurements suggest that Zn-barlowite has structural advantages over herbertsmithite that make its magnetic properties closer to an ideal QSL candidate: its kagome layers are highly resistant to nonmagnetic defects while the interlayers can accommodate a higher amount of Zn substitution.

36 MATERIALS SCIENCE↗

Surpassing millisecond coherence in on chip superconducting quantum memories by optimizing materials and circuit design

The performance of superconducting quantum circuits for quantum computing has advanced tremendously in recent decades; however, a comprehensive understanding of relaxation mechanisms does not yet exist. In this work, we utilize a multimode approach to characterizing energy losses in superconducting quantum circuits, with the goals of predicting device performance and improving coherence through materials, process, and circuit design optimization. Using this approach, we measure significant reductions in surface and bulk dielectric losses by employing a tantalum-based materials platform and annealed sapphire substrates. With this knowledge we predict the relaxation times of aluminum- and tantalum-based transmon qubits, and find that they are consistent with experimental results. We additionally optimize device geometry to maximize coherence within a coaxial tunnel architecture, and realize on-chip quantum memories with single-photon Ramsey times of 2.0 – 2.7 ms, limited by their energy relaxation times of 1.0 – 1.4 ms. These results demonstrate an advancement towards a more modular and compact coaxial circuit architecture for bosonic qubits with reproducibly high coherence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Physical patterning of high-Q superconducting niobium resonators via ion beam etching

The development of superconducting quantum circuits increasingly involves the exploration of chemically distinct materials and complex multilayered structures. Accelerating this trend may benefit from low-damage, materials-agnostic patterning techniques that are compatible with a broad range of materials. Here, in this work, we investigate the utility of low-energy ion beam etching (IBE), a physical patterning technique, as an alternative to reactive ion etching for fabricating low-loss superconducting resonators. We use niobium (Nb) resonators as a test platform, leveraging their well-characterized performance metrics for benchmarking. To address IBE-induced surface redeposition, we introduce an in situ aluminum capping layer combined with targeted post-fabrication chemical treatment. This strategy yields resonators with internal quality factors as high as 6 × 10 5 in the single-photon regime at 50 mK. These results establish low-energy IBE as a promising patterning technique for superconducting devices, with the potential to accelerate development across chemically diverse and multilayered material platforms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Magnetic Genome of Two-Dimensional van der Waals Materials

Magnetism in two-dimensional (2D) van der Waals (vdW) materials has recently emerged as one of the most promising areas in condensed matter research, with many exciting emerging properties and significant potential for applications ranging from topological magnonics to low-power spintronics, quantum computing, and optical communications. In the brief time after their discovery, 2D magnets have blossomed into a rich area for investigation, where fundamental concepts in magnetism are challenged by the behavior of spins that can develop at the single layer limit. However, much effort is still needed in multiple fronts before 2D magnets can be routinely used for practical implementations. In this comprehensive review, prominent authors with expertise in complementary fields of 2D magnetism (i.e., synthesis, device engineering, magneto-optics, imaging, transport, mechanics, spin excitations, and theory and simulations) have joined together to provide a genome of current knowledge and a guideline for future developments in 2D magnetic materials research.

36 MATERIALS SCIENCE↗

Integrating quantum computing resources into scientific HPC ecosystems

Quantum Computing (QC) offers significant potential to enhance scientific discovery in fields such as quantum chemistry, optimization, and artificial intelligence. Yet QC faces challenges due to the noisy intermediate-scale quantum era’s inherent external noise issues. Here, this paper discusses the integration of QC as a computational accelerator within classical scientific high-performance computing (HPC) systems. By leveraging a broad spectrum of simulators and hardware technologies, we propose a hardware-agnostic framework for augmenting classical HPC with QC capabilities. Drawing on the HPC expertise of the Oak Ridge National Laboratory (ORNL) and the HPC lifecycle management of the Department of Energy (DOE), our approach focuses on the strategic incorporation of QC capabilities and acceleration into existing scientific HPC workflows. This includes detailed analyses, benchmarks, and code optimization driven by the needs of the DOE and ORNL missions. Our comprehensive framework integrates hardware, software, workflows, and user interfaces to foster a synergistic environment for quantum and classical computing research. This paper outlines plans to unlock new computational possibilities, driving forward scientific inquiry and innovation in a wide array of research domains.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-Principles Quantum Transport Modeling of Spin-Transfer and Spin-Orbit Torques in Magnetic Multilayers

A unified approach for computing (i) spin-transfer torque in magnetic trilayers like spin valve and magnetic tunnel junction, where injected charge current flows perpendicularly to interfaces, and (ii) spin-orbit torque in magnetic bilayers of the type ferromagnet/spin-orbit-coupled material, where injected charge current flows parallel to the interface, was reviewed. The experimentally explored and technologically relevant spin-orbit-coupled materials include 5d heavy metals, topological insulators, Weyl semimetals, and transition metal dichalcogenides. This approach requires to construct the torque operator for a given Hamiltonian of the device and the steady-state nonequilibrium density matrix, where the latter is expressed in terms of the nonequilibrium Green’s functions and split into three contributions. Tracing these contributions with the torque operator automatically yields field-like and damping-like components of spin-transfer torque or spin-orbit torque vector, which is particularly advantageous for spin-orbit torque where the direction of these components depends on the unknown-in-advance orientation of the current-driven nonequilibrium spin density in the presence of spin-orbit coupling. Illustrative examples are provided by computing spin-transfer torque in a one-dimensional toy model of a magnetic tunnel junction and realistic Co/Cu/Co spin valve, both of which are described by first-principles Hamiltonians obtained from noncollinear density functional theory calculations, as well as by computing spin-orbit torque in a ferromagnetic layer described by a tight-binding Hamiltonian which includes spin-orbit proximity effect within ferromagnetic monolayers assumed to be generated by the adjacent monolayer transition metal dichalcogenide. In addition, it is shown here how spin-orbit proximity effect, quantified by computing (via first-principles retarded Green’s function) spectral functions and spin textures on monolayers of realistic ferromagnetic material like Co in contact with heavy metal or monolayer transition metal dichalcogenide, can be tailored to enhance the magnitude of spin-orbit torque. Furthermore, errors made in the calculation of spin-transfer torque are quantified when using Hamiltonian from collinear density functional theory, with rigidly rotated magnetic moments to create noncollinear magnetization configurations, instead of proper (but computationally more expensive) self-consistent Hamiltonian obtained from noncollinear density functional theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multipolar condensates and multipolar Josephson effects

When single-particle dynamics are suppressed in certain strongly correlated systems, dipoles arise as elementary carriers of quantum kinetics. These dipoles can further condense, providing physicists with a rich realm to study fracton phases of matter. Whereas recent theoretical discoveries have shown that an unconventional lattice model may host a dipole condensate as the ground state, we show that dipole condensates prevail in bosonic systems due to a self-proximity effect. Our findings allow experimentalists to manipulate the phase of a dipole condensate and deliver dipolar Josephson effects, where supercurrents of dipoles arise in the absence of particle flows. The self-proximity effects can also be utilized to produce a generic multipolar condensate. The kinetics of the n -th order multipoles unavoidably creates a condensate of the ( n + 1)-th order multipoles, forming a hierarchy of multipolar condensates that will offer physicists a whole new class of macroscopic quantum phenomena.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗