Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “persistence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Validation of SOLPS-ITER and EDGE2D-EIRENE simulations for H, D, and T JET ITER-like wall low-confinement mode plasmas

Both experiments and simulations with SOLPS-ITER and EDGE2D-EIRENE show that the onset of detachment for the low-field side (LFS) divertor – defined here as the line-averaged upstream density (〈n e 〉 edge ) at which the plasma flux to the LFS target (I LFS-plate ) starts to decrease with increasing 〈n e 〉 edge – is independent of the isotope mass. However, there are three major simulation-experiment discrepancies: (i) the absolute values of I LFS-plate and the electron density (n e ) in the LFS divertor at the onset of detachment are significantly lower in simulations, i.e., approximately a factor of 2 for I LFS-plate and a factor of 3-4 for n e ; (ii) the degree of detachment – defined here as the difference between I LFS-plate at the onset of detachment and at an 〈n e 〉 edge value close to the density limit – is smaller in simulations compared to experiments; and (iii) the experimentally observed larger degree of detachment for D and T plasmas compared to H plasmas cannot be clearly distinguished from the simulation results. There are strong indications that discrepancy (i) is to a large extent caused by neglecting Lyman-opacity effects in our simulations. The simulations predict a similar net volumetric recombination source for all isotopes due to the fact that molecule-activated recombination (MAR) compensates for the reduced electron–ion recombination (EIR) for H, whereas MAR is negligible for D and T. This similar net volumetric recombination source for all isotopes leads to an isotope-independent degree of detachment in simulations. An analysis of the Balmer-α and Balmer-$γ$ emission confirms the underestimate of MAR in simulations (especially for D and T) for the JET metallic wall, which was previously observed for devices with a carbon wall. The underestimate of MAR is an important cause for discrepancy (ii) and the fact that there is a stronger underestimate of MAR for D and T than for H explains discrepancy (iii). Extending the plasma grid to the vessel wall increases I LFS-plate and n e at the onset of detachment by 25%, and the EIR source increases by 80% in detached conditions. Hence, while the extended grid results are closer to the experimental observations, the previously described qualitative discrepancies still persist.

Balmer emission↗
DOE OSTI2024

Glow Discharge Boronization and Real-Time Boronization Using an Impurity Powder Dropper in LHD

In the Large Helical Device (LHD), boronization is utilized for wall conditioning, employing two distinct methods: glow discharge using diborane gas and the injection of boron powder into the plasma via an impurity powder dropper (IPD). Glow discharge boronization is conducted after maintenance when the vacuum vessel is exposed to air and just before the start of an experimental campaign. In contrast, real-time boronization using the IPD is performed during discharges. The distribution of boron on plasma-facing components was assessed through long-term material probes in the case of glow discharge and through numerical simulations for the IPD method. Results indicated non-uniform boron distributions in both cases. The impact of these boronization techniques on impurity levels and the lifetime of their effects were also examined. Both methods effectively reduced oxygen and iron in the plasma, with the iron impurities originating from the first wall. For glow discharge boronization, the reduction in oxygen levels persisted until the end of the experimental campaign, whereas the reduction in iron levels only lasted a few days. In the case of boron injection during long pulse discharges exceeding 200 s, the suppression of oxygen and iron was observed. The effect on iron quickly diminished within several seconds after the injection ended, whereas the effect on oxygen lasted more than 100 s. The difference in the lifetimes of the boronization effects is further discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Deep glassy state dynamic data challenge glass models: Elastic models

The idea of an “ideal” glass transition temperature has persisted at least since the work from Kauzmann when it was observed that the entropy of glass-forming liquids extrapolated to below that of the crystal, thus suggesting the need for a phase transition at a finite or non-zero absolute temperature. This thermodynamic paradox was also found to be related to the observations of a diverging of the extrapolated viscosity or relaxation times at a temperature near to this ideal glass transition. Recently, however, we have carried out experiments using both an ancient amber material and an ultra-stable amorphous fluoropolymer that challenge the ideas of the divergence of the viscosity or relaxation times at this ideal glass transition. In the present manuscript we have evaluated two theories of the glass transition that are based on ideas related to elasticity of the amorphous glass-forming material. We find that the models from both J. Dyre and his group and of K.S. Schweizer and his group not only show non-diverging behavior but are also in some agreement with the new data, though still showing somewhat slower dynamics than those observed in the experiments. The work shows that the data are good enough to distinguish between theories and it is suggested that other mechanisms may be needed to fully describe the non-diverging responses of the ultra-stable glasses.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Combined effects of horizontal and vertical resolution on reliable turbulence prediction at tidal energy sites: A systematic study in the Salish Sea, WA

Predicting turbulence characteristics with coastal ocean models is essential for tidal energy converter deployment. While large eddy simulation provides a detailed turbulence representation, computational limitations restrict its use to smaller domains. We systematically evaluate whether well-configured coastal models can provide reliable turbulence prediction through progressive refinement of 3D model representation. We implemented four model configurations (Levels 1–4) using terrain-following coordinates, isolating the impacts of horizontal resolution, vertical resolution, and layer distribution. We validated all configurations against field measurements from the Salish Sea, WA. Results show that tidal current velocity predictions remain unchanged regarding model configuration, but turbulence properties are sensitive to resolution refinement. Increasing vertical resolution alone proved insufficient; even with vertical sigma-levels rising from 11 to 41, significant underprediction persisted until finer horizontal resolution better captured bathymetric variations. The Level 4 configuration, incorporating geometric sigma-levels distribution, achieved turbulence prediction skill scores exceeding 0.90. Turbulence closure comparison revealed Mellor- Yamada 2.5 outperformed k-epsilon in TKE prediction (skill scores 0.84–0.94 versus 0.72–0.81) due to better boundary layer parameterization. This study shows that well-configured coastal models effectively bridge the gap between simplified tools and costly high-fidelity modeling, offering the tidal energy industry practical and cost-effective turbulence data at commercially relevant scales.

Marine Energy↗
DOE OSTI2024

Carbon accumulation rate peaks at 1,000-m elevation in tropical planted and regrowth forests

Tropical planted and regrowth forests (TPRFs) are one of the most low-cost components for recovering biomass-stored carbon in the tropics. Nevertheless, challenges persist in pinpointing which elevational ranges exhibit the largest carbon accumulation rate ($γ$ rapid ) due to the highly inconsistent previous assessments. This prevents the selection of optimal locations for implementing large-scale reforestation in the tropics. Here, in this study, we proposed a refined approach that used a carbon accumulation threshold (<80% of the maximum value) to quantify $γ$ rapid in TPRFs at various elevations. We find that $γ$ rapid increases with elevations from 300 to 1,000 m and declines at elevations >1,000 m. TPRFs at elevations ~1,000 m exhibit three times more $γ$ rapid than lowland TPRFs. This optimal elevation, highly dependent on background temperatures, varies slightly but significantly across different mountains. These findings provide guidelines for policymakers to determine the optimal elevations from regional to continental scales when implementing reforestation initiatives in the tropics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Reproducible emission from nonlinear random lasers

Multiple scattering of light serves as a mechanism for feedback in random lasers. Consequently, internal spatial mode patterns, lasing wavelengths, and output directionality can all be random. Strong mode interaction can occur in such devices due to spatially overlapping modes resulting in nonlinearity with respect to the pump input power. Nevertheless, temporal coherence and lasing mode amplitude can be fixed at a constant pumping rate. This is a property desirable for applications where unique randomness is exploited but expected to be reliable over time, such as physical unclonable functions. Random lasers can also be cheaply and easily fabricated, exhibit relatively low lasing thresholds and high emission intensity. However, the precise scattering properties of such structures and fluctuations in the pump field can make device emission irreproducible, thereby limiting random laser applications. Here, in this work, we directly compare the random lasing spectra from zinc oxide samples fabricated in four distinct ways: spin-coating, sputtering, solgel deposition, and atomic layer deposition. The particular method of fabrication has a strong impact. Samples made through atomic layer deposition here exhibit both reproducibility and strong nonlinearity desirable for applications. Randomness in emission spectra persists across hundreds of repeated and averaged measurements irrespective of spatial location and is demonstrably nonlinear with respect to input signal intensity.

47 OTHER INSTRUMENTATION↗
DOE OSTI2025

The evidence of N = 16 shell closure and β -delayed neutron emission from 25 F

We measured the β -delayed neutron emission from 25 F for the first time at the Facility for Rare Isotope Beams (FRIB). Using combined neutron and γ -ray detector systems of the FRIB Decay Station Initiator (FDSi), we observed β -decay transitions populating neutron unbound states between 4.2 and 8 MeV in 25 Ne. The experimental results led to the revision of the β -decay half-life and β -delayed neutron-emission probability of 25 F. The β -decay strength distribution of 25 F extracted from the data agrees with the shell-model predictions using the USDB and SDPF-M effective interactions. This result indicates that the spherical neutron shell gap persists in 25 F and 25 Ne.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Shell effects in quasi-fission for calcium induced reactions forming thorium isotopes

Quantum shell effects induce an asymmetric fission mode in actinides, which disappears in neutron deficient isotopes. Quasi-fission, characterized by a significant mass transfer in heavy ion collisions at low-energies, is expected to be affected by similar shell effects. This is studied in 40−56 Ca+176 reactions with the time-dependent Hartree-Fock approach. All reactions exhibit a mass equilibration process that stops when a heavy fragment with 𝑍 ≃ 54 protons is formed. Unlike the fission of thorium compound nuclei, quasi-fission does not exhibit a transition to symmetric modes in neutron deficient systems. This observation is interpreted in terms of potential energy surfaces that show a persistence of an asymmetric valley with an increasing barrier preventing its population in fission of the most neutron deficient thorium isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

No evidence of a reduction in the dipole polarisability at shell closures

Photoabsorption reactions have a long and productive history as probes of the response of nuclei to electromagnetic fields. In recent years, there has been a suggestion that the dipole polarisability may be reduced at shell closures, potentially due to the reduced level density. In the current paper, more recent photoabsorption strengths are reanalysed including nuclei on closed proton shells to search for a similar reduction. The previously reported reduction is not reproduced. We conclude that the previously observed reduction may be due to incomplete evaluations of the photoabsorption due to missing cross section contributions and experimental artefacts. More experimental data are necessary to draw a firm conclusion about whether shell effects persist into high excitation energies, especially data which can obviate any systematic effects and look at relative photoabsorption strengths between nuclei.

Giant dipole response↗
DOE OSTI2026

Multiplicity dependence of K*(892) ± production in pp collisions at $\sqrt{s}$ = 13 TeV

The first results of K*(892) ± production at midrapidity (|y| < 0.5) in pp collisions at $\sqrt{s}$= 13 TeV as a function of the event multiplicity are presented. The K*(892) ± has been reconstructed via its hadronic decay channel K*(892) ± → π ± + K$^0_{\textrm{S}}$ using the ALICE detector at the LHC. For each multiplicity class, the differential transverse momentum (p T ) spectrum, the mean transverse momentum ⟨p T ⟩, the p T -integrated yield (dN/dy), and the ratio of the K*(892) ± to K$^0_{\textrm{S}}$ yields are reported. These are consistent with previous K*(892) 0 resonance results with a higher level of precision. Comparisons with phenomenological models such as PYTHIA6, PYTHIA8, EPOS-LHC, and DIPSY are also discussed. For the first time, a significant K*(892) ± /K$^0_{\textrm{S}}$ suppression in pp collisions is observed at a 7σ level passing from low to high multiplicity events. The ratios of the p T -differential yields of K*(892) ± and K$^0_{\textrm{S}}$ in high and low multiplicity events are also presented along with their double ratio. For p T ≲ 2 GeV/c this double ratio persists below unity by more than 3σ suggesting that the suppression affects mainly low p T resonances. The measured decreasing trend of the K*(892) ± /K$^0_{\textrm{S}}$ ratio with increasing multiplicity, which in heavy-ion collisions is typically attributed to the rescattering of decay particles of the short-lived resonances, is reproduced by the EPOS-LHC model without the use of hadronic afterburners.

Hadronic resonance production↗
DOE OSTI2020

A data analytical approach for assessing the efficacy of Operational Technology active defenses against insider threats

In recent years, the need for Operational Technology (OT) defenses has been recognized, serving as an additional line of defense when Information Technology (IT) defenses are bypassed. This is no longer considered an uncommon possibility when dealing with advanced persistent threat (APT) actors expected to be state-sponsored and receiving insider assistance. In these extreme adversarial situations, OT defenses aim to provide another layer of defense for the system, introduced directly at the physical process level, as described by the sensors data, the system model, and control actions. Just like IT defenses, two schools of thought, i.e., passive and active defenses, have emerged to address this challenge. In active defenses, representing the focus of this paper, known signatures, synthesized based on the system's unique characteristics, are inserted into the system. In contradistinction, passive methods rely solely on observing system behavior in search of patterns of normal behavior with deviations thereof representing abnormal behavior. In their most sophisticated implementations, both passive and active defenses rely on the use of data analytics to identify the patterns and synthesize the observed and/or inserted signatures. Past research has shown that passive defenses may be bypassed by APT actors relying on data analytics and their intimate knowledge of the system to evade detection by respecting the patterns identified by the defenders. Here this manuscript explores the use of active defenses under the assumption that the attacker has privileged access to the system, including access to the system's model and sensors data. Specifically, this manuscript assesses the ability of active defenses to remain invisible to the attackers, and discusses the associated challenges that must be addressed to ensure their resiliency against APT actors.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2020

Chain flexibility and glass transition temperatures of poly(n-alkyl (meth)acrylate)s: Implications of tacticity and chain dynamics

The relationship between chain microstructure and glass transition temperature (T g ) is complicated for poly(alkyl methacrylate)s and poly(alkyl acrylate)s. Despite intensive studies, relationships between the structures of these polymers and their properties, including solution characteristics and T g , are still controversial. Solution properties, chain conformations, including Flory's characteristic ratio (C ∞ ), persistence length (l p ), and chain diameters, and T g are reported for series of poly(n-alkyl acrylate)s and poly(n-alkyl methacrylate)s having alkyl side chain lengths (n) ranging from 1 to 10 carbons in length, with uniform and well-characterized tacticities. Chain flexibilities of both series of polymers decrease as n increases, reflecting increased hindrances to rotation about backbone bonds as side chains become longer. Conversely, the T g s for both series of polymers decrease substantially as n increases, reflecting the greater side chain mobilities of long alkyl substituents. For shorter alkyl chain lengths, T g s for the poly(n-alkyl acrylate)s are much lower than for the corresponding poly(n-alkyl methacrylate)s, a difference which has been attributed in the past to the presumed reduced chain flexibility of polymethacrylates due to the presence of the α-methyl substituent. However, contrary to such expectations, C ∞ and l p values for these two series of polymers are nearly identical at a given n value, except for the longest n-alkyl substituents. Instead, the differences in T g may be attributed to the differences in tacticity of the two series – almost ideally atactic for the poly(n-alkyl acrylate)s but high in syndiotacticity for the poly(n-alkyl methacrylate)s. The T g s for the two series of polymers approach that of polyethylene at longer alkyl chain lengths. In addition, the effects of tacticity and chain dynamics on C ∞ , l p , and T g of poly(methyl methacrylate) is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of Microstructure on Chain Flexibility and Glass Transition Temperature of Polybenzofulvene

Polybenzofulvene (PBF) is a polydiene with a very high glass transition temperature (T g ), which makes it a potential candidate for use as the hard block for high-temperature thermoplastic elastomer applications. The T g s of polydienes are known to be related to chain flexibility. However, no studies have been reported that correlate the chain flexibility to the microstructure of PBF. Herein, we present a study of solution properties of linear PBFs with narrow molecular weight dispersity and having 1,2-addition ranging from 23% to 99%. The materials were prepared by living anionic polymerization under different conditions. Specifically, the chain flexibility as defined by the Flory's characteristic ratio, , and dependence of chain flexibility on microstructure by combined measurements of intrinsic viscosity and molecular weight using triple-detector size exclusion chromatography (SEC) is studied. The persistence lengths (l p ) and chain diameters (d B ) were also estimated using the touched-bead wormlike chain model. To the best of our knowledge, the characteristic ratio of PBF is found to be the highest of all polydienes that have been reported so far.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Fluorescent aggregate structure revealed in bisphenol F epoxy thermoset

Bisphenol F (BPF) epoxy resin is a prepolymer component of thermosets used in construction of reinforced carbon fiber composites (RCFC). The fluorescence of this resin can provide information about chemical and structural alterations of the thermoset from thermal or mechanical damage. While some work has investigated the fluorescence spectra of bisphenol A epoxy resin, a structural analog of BPF, none have studied BPF. The purpose of this study is to investigate the baseline fluorescence spectra of the BPF epoxy resin for features that could be utilized for monitoring damage and structural alterations. Bisphenol F epoxy resin was found to have two emission peaks with a broad peak centered at 410 nm and a sharp peak centered at 550 nm. The broad emission peak was identified as the fluorescence from BPF epoxy monomer while the sharp emission peak was found to be from an aggregate structure present in the epoxy resin. It is hypothesized that this structure is an H-aggregate based on the emission features and structural stability of the aggregate compared to the alternative J-aggregate which was determined via density functional theory calculations. The H-aggregate was found to persist into one of the cured thermoset formulations evaluated but was lost when exposed to elevated temperatures below thermal degradation of the thermoset. This loss of aggregate structure was due to polymer network rearrangement. This new fluorescence signature can be used as an indicator of polymer network rearrangement from thermal exposure which may alter the expected material performance and precede thermal degradation.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Foundational insights into the mechanical and molecular evolution of porcine skin gelatin during gelation

Gelatin is a widely used material in biomedical fields, particularly in regenerative medicine and tissue engineering, due to its biocompatibility and versatile properties. While prior research has explored methods to enhance gelatin's mechanical strength and stability, fundamental studies on gelatin, specifically its curing process, mechanical stiffness, and chemical evolution during gelation, remain limited. This study uses ultrasonic testing and Fourier Transform Infrared Spectroscopy (FTIR) to examine gelatin's stiffness and molecular changes during gelation. Samples of 175 and 300 Porcine Skin Bloom Strength Gelatin at concentrations of 2% and 6% (w/v) were analyzed. Through transmission ultrasonic testing helped identify key transition points in gelation, with higher concentrations exhibiting delayed transitions. FTIR revealed that C-N bond formation peaks early while N-H bond deformation persists. A correlation emerged between sound speed and peak absorbance, suggesting that changes in molecular mobility may contribute to the observed sound speed behavior during periods of active bond formation. However, as gelation continues, fewer bonding components may be available, potentially decreasing molecular movement and contributing to the observed increase in sound speed. These findings provide insights into gelatin's mechanical and chemical evolution, offering a framework for improved control over its gelation kinetics. Swept-Frequency Acoustic Interferometry (SFAI) was performed at the end of the curing process to measure the sound speed, enabling the calculation of the bulk moduli of the gelatin samples. The combined use of ultrasonic and FTIR testing provides a non-destructive method for characterizing gelatin and other biomaterials. This approach advances understanding of gelatin curing behavior and supports the development of safer biomaterials with tailored mechanical properties for various applications such as tissue engineering and regenerative medicine.

Biomaterials↗
DOE OSTI2025

Paleoclimatic implications of glacial fluctuations in the Sierra Nevada del Cocuy, northern Andes, Colombia, during the Lateglacial and Holocene

The reconstruction of former mountain glaciers from geomorphic mapping and cosmogenic-nuclide surface-exposure dating provides a unique opportunity to infer patterns of past terrestrial climate variability. Tropical mountain glaciers are particularly valuable as there are comparatively few terrestrial climate proxies at equatorial latitudes relative to higher latitudes. As the single largest climate zone on Earth, the tropics play an outsized role in mediating global climate via the ocean-atmosphere transfer of latent heat and water vapor. Nonetheless, there remains a persistent gap in our understanding of how the tropics influenced – or were influenced by – the high-magnitude climate shifts of the Late Pleistocene, and whether this high-energy region simply responded to extratropical forcing or was itself a driver of global climatic change. To help address this knowledge gap, we analyzed geologic evidence for past glacial fluctuations in three adjacent valleys in the Sierra Nevada del Cocuy, the highest subrange of the Eastern Cordillera in the Colombian Andes, to provide a terrestrial record of atmospheric temperature during the latter part of Termination 1. Coupled with geomorphic mapping and paleo-snowline reconstructions, our beryllium-10 glacial chronology indicates that glaciers in the humid inner tropics underwent pronounced growth and gradual decay during the Antarctic Cold Reversal (14.5–12.8 ka) and Younger Dryas (12.8–11.7 ka) periods, respectively, following a trend that, according to directly dated moraine records from throughout both polar hemispheres, appears to have been global. While the specific mechanism(s) behind this large-scale behavior remains to be corroborated, we revisit the hypothesis that ocean-atmosphere heat transfer and water vapor flux are key drivers of abrupt Lateglacial temperature fluctuations. Subsequent to the Lateglacial, deglaciation of the Sierra Nevada del Cocuy accelerated during the Early Holocene, a pattern also observed in other tropical glacier records. More recently, the magnitude of snowline rise and glacier retreat over the last two centuries supports the view that modern tropospheric warming is anomalously strong at least relative to the last ∼16,000 years.

Andes↗