SEARCH · Engineering Papers
Results for “oxidation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Retention and chemical speciation of uranium in an oxidized wetland sediment from the Savannah River Site
Abstract not provided
Epitaxial Fe/Y2O3 interfaces as a model system for oxide-dispersion-strengthened ferritic alloys
Not Available
Liquidus temperature and chemical durability of selected glasses to immobilize rare earth oxides waste
Not Available
Oxide dispersoid coherency of a ferritic-martensitic 12Cr oxide-dispersion-strengthened alloy under self-ion irradiation
Ferritic-martensitic oxide-dispersion-strengthened (ODS) alloy has shown excellent mechanical property and high radiation tolerance. However, the stability of dispersoids during displacive irradiation in the individual ferritic and martensitic phases is unclear. In this work, the correlation among dispersoid coherency, size, density, and matrix phase are studied in dual-phase 12Cr ODS after 100 peak displacements-per-atom (dpa) irradiation at 475°C, using 3.5 MeV Fe 2+ self-ions. The size and density changes of coherent and incoherent dispersoids were analyzed as a function of irradiation depth. The average dispersoid size decreased after irradiation in both phases, and the large incoherent dispersoids in the tempered martensite phase underwent a more dramatic change than those in the ferrite phase. The dispersoid density significantly increased in the ferrite phase within the irradiated region, mostly resulting in an increase in coherent dispersoid density. On the other hand, only a small change in density was observed in the tempered martensite phase for both coherent and incoherent dispersoids. This study shows that dispersoid evolution is dramatically different in ferrite and tempered martensite phases.
A high-fidelity multiphysics model for the new solid oxide iron-air redox battery part I: Bridging mass transport and charge transfer with redox cycle kinetics
A high-fidelity two-dimensional axial symmetrical multi-physics model is described in this paper as an effort to simulate the cycle performance of a recently discovered solid oxide metal-air redox battery (SOMARB). The model collectively considers mass transport, charge transfer and chemical redox cycle kinetics occurring across the components of the battery, and is validated by experimental data obtained from independent research. In particular, the redox kinetics at the energy storage unit is well represented by Johnson-Mehl-Avrami-Kolmogorov (JIVIAK) and Shrinking Core models. The results explicitly show that the reduction of Fe3O4 during the charging cycle limits the overall performance. Distributions of electrode potential, overpotential, Nernst potential, and H-2/H2O-concentration across various components of the battery are also systematically investigated. (C) 2015 Elsevier B.V. All rights reserved.
Surface studies of crystalline and amorphous Zn-In-Sn-O transparent conducting oxides
X-ray and ultraviolet photoelectron spectroscopy (UPS) studies were made of in situ RF magnetron-sputtered crystalline (c) and amorphous (a) Zn–In–Sn–O (ZITO) thin films, ex situ pulsed laser deposited c- and a-ZITO thin films, and bulk ZITO ceramics. Cosubstitution of Zn and Sn for In results in an increase of the In core level binding energy at a given Fermi level compared to that measured in undoped and Sn-doped In 2 O 3 (ITO). In plots of work function vs. Fermi level, in situ c-ZITO and a-ZITO films have low ionization potentials (7.0–7.7 eV) that are similar to undoped In 2 O 3 . In contrast, dry-air-annealed in situ films, ex situ films, and bulk ceramics have higher ionization potentials (7.7–8.1 eV) that are more similar to ITO and match well with previous work on air-exposed surfaces. Kelvin Probe measurements were made of select a-ZITO films exposed to air and ultraviolet/ozone-treated so as to measure work functions under conditions commonly employed for device fabrication. Results (4.8–5.3 eV) were in good agreement with the UPS work functions of oxygen-exposed materials and with literature values. Lastly, a parallelogram plot of work function vs. Fermi level shows that a wider range of work functions is achievable in ZITO materials as compared to other transparent conducting oxides (Sb-doped SnO 2 , Al-doped ZnO, Sn-doped In 2 O 3 ), making ZITO more versatile for applications.
Actinide 4f x-ray absorption in oxides
Explore the source record for details and available documents.
Intrinsic Li Distribution in Layered Transition-Metal Oxides Using Low-Dose Scanning Transmission Electron Microscopy and Spectroscopy
Understanding Li distribution in layered lithium transition-metal oxide (LiTMO) cathodes in Li-ion batteries has been a major challenge at the atomic scale and nanoscale. Li is extremely difficult to study by transmission electron microscopy (TEM) because the high-energy electrons impart significant energy and cause massive migration. Here, we directly map the intrinsic spatial distribution and bonding of Li in LiNiO 2 -layered cathode materials using low-dose and low-loss electron energy loss spectroscopy (EELS). EELS spectra of the Li–K edge are measured simultaneously with O–K and Ni–L, M 3,2 edges from layered, cation-mixed, and rock-salt phases and directly matched with atomic-resolution scanning TEM images to correlate the changes in peak intensities and positions to the stoichiometry changes with continual loss of Li and O. Changes in the Li content in the LiNiO 2 particles as a function of electron beam dose are studied by sequential Li spectroscopic mapping. We show that the “intrinsic” Li distribution can be observed using a total dose of less than ~1.5 × 10 8 e – nm –2 at an accelerating voltage of 80 kV. The method of nanoscale mapping of Li distribution introduced in this study is applicable to high-Ni LiTMO cathode materials (>89% of Ni) as well as LiNiO 2 . Further study on the extra peaks of the Li–K edge reveals that the peak at ~59 eV is from the Li ions intercalated in between NiO 2 layers barely interacting with each other with less Li K shell electrons pulled to the L shell electrons in NiO 2 . Furthermore, the results shown here provide improved low-loss TEM characterization approaches that can be used to understand the intrinsic fundamental behaviors in Li-ion batteries.
Revealing the Conversion Mechanism of Transition Metal Oxide Electrodes during Lithiation from First-Principles
Transition metal oxides such as Co3O4 and NiO are of significant interest as conversion anode materials for lithium-ion batteries (LIBs), due to their remarkably high theoretical capacities and low cost. While many previous experiments have found that the charge/discharge reactions of Co3O4 and NiO can be highly reversible, detailed information about the mechanisms of these reactions, such as the origin of the voltage hysteresis (>1.0 V) between the charge/discharge cycles, is still poorly understood. In this work, we develop and utilize a new computational mechanistic approach that helps elucidate the hysteresis and nonequilibrium reaction pathways associated with these conversion materials. We apply this methodology to investigate a variety of lithiation reaction pathways of Co3O4 and NiO by systematically exploring the energetics of a large number of equilibrium and nonequilibrium LixCo3O4 (0 ≤ x ≤ 8) and LixNiO (0 ≤ x ≤ 2) structural configurations using first-principles calculations. The overall value of the voltages from our nonequilibrium pathway is in much better agreement with experimental lithiation than the calculated equilibrium voltage while the overall value of the latter reasonably agrees with experimental delithiation. Hence, we propose the charge and discharge processes proceed through equilibrium and nonequilibrium reaction paths, respectively, which contribute significantly to the experimentally observed voltage hysteresis in Co3O4 and NiO. Additionally, we find a low-energy, lithiated intermediate phase (Li3Co3O4) with an oxygen framework equal to that of the initial Co3O4 spinel phase. This intermediate phase represents the capacity threshold below which limited volume expansion and better reversibility can be realized and above which reactions lead to structural degradation and huge expansion.
Aqueous Synthesis of Technetium-Doped Titanium Dioxide by Direct Oxidation of Titanium Powder, a Precursor for Ceramic Nuclear Waste Forms
Technetium-99 (Tc) is a problematic fission product that complicates the long-term disposal of nuclear waste due to its long half-life, high fission yield, and the environmental mobility of pertechnetate, its stable form in aerobic environments. One approach to preventing Tc contamination is through incorporation into durable waste forms based on weathering-resistant minerals such as rutile (titanium dioxide). Here, the incorporation of technetium into titanium dioxide by means of simple, aqueous chemistry - direct oxidation of titanium powder in the presence of ammonium fluoride - is achieved. X-ray absorption fine structure spectroscopy and diffuse reflectance spectroscopy indicate that Tc(IV) replaces Ti(IV) within the structure. Rather than being incorporated as isolated Tc(IV) ions, Tc is present as pairs of edge-sharing Tc(IV) octahedra similar to molecular Tc(IV) complexes such as [(H 2 EDTA)TcIV](μ-O) 2 . Technetium-doped TiO 2 was suspended in deionized water under aerobic conditions, and the Tc leached under these conditions was followed for 8 months. The normalized release rate of Tc (LR Tc ) from the TiO 2 particles is low (3 × 10 -6 g m -2 d -1 ), which illustrates the potential utility of TiO 2 as waste form. However, the small size of the as-prepared TiO 2 nanoparticles results in an estimated retention of Tc of 10 4 years, which is only a fraction of the half-life of Tc (2.1 × 10 5 years).
A Mg-Doped High-Nickel Layered Oxide Cathode Enabling Safer, High-Energy-Density Li-Ion Batteries
High-nickel layered oxide cathodes with a Ni content of > 90% show substantial potential for next-generation lithium-ion batteries (LIBs) due to their high capacity and lower cost. However, they are plagued by rapid capacity decay and poor thermal stability, which hamper their practical viability. Here we present Li 0.98 Mg 0.02 Ni 0.94 Co 0.06 O 2 (NC-Mg) with 2% Mg doping, aiming to provide a strategic guideline for solving the issues. The Mg 2+ ions occupy the lithium layer and are pro-posed to act as pillar ions, which substantially enhances the structural reversibility and reduces the anisotropic lattice distortion upon cycling, thereby greatly improving the electrochemical and thermal stability of NC-Mg compared to the undoped LiNi 0.94 Co 0.06 O 2 (NC). Specifically, NC-Mg delivers 214 mA h g -1 with a capacity retention of 80.1% after 500 cycles in pouch-type full cells, much higher than the retention of NC (56.3%). A discharge capacity of 158 mA h g -1 at 10C rate demonstrates its remarkable rate capability. Additionally, the Mg doping significantly elevates the exothermic peak tem-perature of NC-Mg to 211 °C, in sharp contrast to 177 °C for NC, highlighting the improved thermal stability of NC-Mg. Collectively, the superior performance of NC-Mg demonstrates a feasible alternative strategy for developing safer, high-energy-density LIBs.
Local and Bulk Probe of Vanadium-Substituted α-Manganese Oxide (α-KxVyMn8-yO16) Lithium Electrochemistry
Explore the source record for details and available documents.