Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optoelectronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Magnetoelectric Radical Hydrocarbons

The molecular radicals, systems with unpaired electrons of open-shell electronic structures, set the stage for a multidisciplinary science frontier relevant to the cooperative magnetic exchange interaction and magnetoelectric effect. Here ferroelectricity together with magnetic spin exchange coupling in molecular radical hydrocarbon solids is reported, representing a new class of magnetoelectrics. Electronic correlation through radical–radical interactions plays a decisive role in the coupling between magnetic and charge orders. A substantial photoconductance and visible-light photovoltaic effect are found in radical hydrocarbons. Finally, the ability to simultaneously control and retrieve the changes in magnetic and electrical responses opens up a new breadth of applications, such as radical magnetoelectrics, magnets, and optoelectronics.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Scanning Probe Lithography Patterning of Monolayer Semiconductors and Application in Quantifying Edge Recombination

Scanning probe lithography is used to directly pattern monolayer transition metal dichalcogenides (TMDs) without the use of a sacrificial resist. Here, using an atomic-force microscope, a negatively biased tip is brought close to the TMD surface. By inducing a water bridge between the tip and the TMD surface, controllable oxidation is achieved at the sub-100 nm resolution. The oxidized flake is then submerged into water for selective oxide removal which leads to controllable patterning. In addition, by changing the oxidation time, thickness tunable patterning of multilayer TMDs is demonstrated. This resist-less process results in exposed edges, overcoming a barrier in traditional resist-based lithography and dry etch where polymeric byproduct layers are often formed at the edges. By patterning monolayers into geometric patterns of different dimensions and measuring the effective carrier lifetime, the non-radiative recombination velocity due to edge defects is extracted. Using this patterning technique, it is shown that selenide TMDs exhibit lower edge recombination velocity as compared to sulfide TMDs. The utility of scanning probe lithography towards understanding material-dependent edge recombination losses without significantly normalizing edge behaviors due to heavy defect generation, while allowing for eventual exploration of edge passivation schemes is highlighted, which is of profound interest for nanoscale electronics and optoelectronics.

2D materials↗
DOE OSTI2019

Metal‐Guided Selective Growth of 2D Materials: Demonstration of a Bottom‐Up CMOS Inverter

Abstract 2D transition metal dichalcogenide (TMD) layered materials are promising for future electronic and optoelectronic applications. The realization of large‐area electronics and circuits strongly relies on wafer‐scale, selective growth of quality 2D TMDs. Here, a scalable method, namely, metal‐guided selective growth (MGSG), is reported. The success of control over the transition‐metal‐precursor vapor pressure, the first concurrent growth of two dissimilar monolayer TMDs, is demonstrated in conjunction with lateral or vertical TMD heterojunctions at precisely desired locations over the entire wafer in a single chemical vapor deposition (VCD) process. Owing to the location selectivity, MGSG allows the growth of p‐ and n‐type TMDs with spatial homogeneity and uniform electrical performance for circuit applications. As a demonstration, the first bottom‐up complementary metal‐oxide‐semiconductor inverter based on p‐type WSe 2 and n‐type MoSe 2 is achieved, which exhibits a high and reproducible voltage gain of 23 with little dependence on position.

Chiu, Ming‐Hui↗
DOE OSTI2019

Addition of the Lewis Acid Zn(C 6 F 5 ) 2 Enables Organic Transistors with a Maximum Hole Mobility in Excess of 20 cm 2 V –1 s –1

Incorporating the molecular organic Lewis acid tris(pentafluorophenyl)borane [B(C 6 F 5 ) 3 ] into organic semiconductors has shown remarkable promise in recent years for controlling the operating characteristics and performance of various opto/electronic devices, including, light-emitting diodes, solar cells, and organic thin-film transistors (OTFTs). Despite the demonstrated potential, however, to date most of the work has been limited to B(C 6 F 5 ) 3 with the latter serving as the prototypical air-stable molecular Lewis acid system. Herein, the use of bis(pentafluorophenyl)zinc [Zn(C 6 F 5 ) 2 ] is reported as an alternative Lewis acid additive in high-hole-mobility OTFTs based on small-molecule:polymer blends comprising 2,7-dioctyl[1]benzothieno [3,2-b][1]benzothiophene and indacenodithiophene–benzothiadiazole. Systematic analysis of the materials and device characteristics supports the hypothesis that Zn(C 6 F 5 ) 2 acts simultaneously as a p-dopant and a microstructure modifier. It is proposed that it is the combination of these synergistic effects that leads to OTFTs with a maximum hole mobility value of 21.5 cm 2 V –1 s –1 . In conclusion, the work not only highlights Zn(C 6 F 5 ) 2 as a promising new additive for next-generation optoelectronic devices, but also opens up new avenues in the search for high-mobility organic semiconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Enabling Tailorable Optical Properties and Markedly Enhanced Stability of Perovskite Quantum Dots by Permanently Ligating with Polymer Hairs

Abstract Instability of perovskite quantum dots (QDs) toward humidity remains one of the major obstacles for their long‐term use in optoelectronic devices. Herein, a general amphiphilic star‐like block copolymer nanoreactor strategy for in situ crafting a set of hairy perovskite QDs with precisely tunable size and exceptionally high water and colloidal stabilities is presented. The selective partition of precursors within the compartment occupied by inner hydrophilic blocks of star‐like diblock copolymers imparts in situ formation of robust hairy perovskite QDs permanently ligated by outer hydrophobic blocks via coprecipitation in nonpolar solvent. These size‐ and composition‐tunable perovskite QDs reveal impressive water and colloidal stabilities as the surface of QDs is intimately and permanently ligated by a layer of outer hydrophobic polymer hairs. More intriguingly, the readily alterable length of outer hydrophobic polymers renders the remarkable control over the stability enhancement of hairy perovskite QDs.

Yoon, Young Jun↗
DOE OSTI2019

Wrap–Around Core–Shell Heterostructures of Layered Crystals

Engineered heterostructures create new functionality by integrating dissimilar materials. Combining different 2D crystals naturally produces two distinct classes of heterostructures, vertical van der Waals (vdW) stacks or 2D sheets bonded laterally by covalent line interfaces. Here, when joining thicker layered crystals, the arising structural and topological conflicts can result in more complex geometries. Phase separation during one–pot synthesis of layered tin chalcogenides spontaneously creates core–shell structures in which large orthorhombic SnS crystals are enclosed in a wrap–around shell of trigonal SnS 2 , forcing the coexistence of parallel vdW layering along with unconventional, orthogonally layered core–shell interfaces. Measurements of the optoelectronic properties establish anisotropic carrier separation near type II core–shell interfaces and extended long–wavelength light harvesting via spatially indirect interfacial absorption, making multifunctional layered core–shell structures attractive for energy–conversion applications.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Extrinsic Green Photoluminescence from the Edges of 2D Cesium Lead Halides

Abstract Since the first report of the green emission of 2D all‐inorganic CsPb 2 Br 5 , its bandgap and photoluminescence (PL) origin have generated intense debate and remained controversial. After the discovery that PL centers occupy only specific morphological structures in CsPb 2 Br 5 , a two‐step highly sensitive and noninvasive optical technique is employed to resolve the controversy. Same‐spot Raman‐PL as a static property–structure probe reveals that CsPbBr 3 nanocrystals are contributing to the green emission of CsPb 2 Br 5 ; pressure‐dependent Raman‐PL with a diamond anvil cell as a dynamic probe further rules out point defects such as Br vacancies as an alternative mechanism. Optical absorption under hydrostatic pressure shows that the bandgap of CsPb 2 Br 5 is 0.3–0.4 eV higher than previously reported values and remains nearly constant with pressure up to 2 GPa in good agreement with full‐fledged density functional theory (DFT) calculations. Using ion exchange of Br with Cl and I, it is further proved that CsPbBr 3− x X x (X = Cl or I) is responsible for the strong visible PL in CsPb 2 Br 5− x X x . This experimental approach is applicable to all PL‐active materials to distinguish intrinsic defects from extrinsic nanocrystals, and the findings pave the way for new design and development of highly efficient optoelectronic devices based on all‐inorganic lead halides.

Wang, Chong↗
DOE OSTI2020

Efficient Energy Funneling in Quasi‐2D Perovskites: From Light Emission to Lasing

Abstract Quasi‐2D Ruddlesden–Popper halide perovskites with a large exciton binding energy, self‐assembled quantum wells, and high quantum yield draw attention for optoelectronic device applications. Thin films of these quasi‐2D perovskites consist of a mixture of domains having different dimensionality, allowing energy funneling from lower‐dimensional nanosheets (high‐bandgap domains) to 3D nanocrystals (low‐bandgap domains). High‐quality quasi‐2D perovskite (PEA) 2 (FA) 3 Pb 4 Br 13 films are fabricated by solution engineering. Grazing‐incidence wide‐angle X‐ray scattering measurements are conducted to study the crystal orientation, and transient absorption spectroscopy measurements are conducted to study the charge‐carrier dynamics. These data show that highly oriented 2D crystal films have a faster energy transfer from the high‐bandgap domains to the low‐bandgap domains (<0.5 ps) compared to the randomly oriented films. High‐performance light‐emitting diodes can be realized with these highly oriented 2D films. Finally, amplified spontaneous emission with a low threshold 4.16 µJ cm −2 is achieved and distributed feedback lasers are also demonstrated. These results show that it is important to control the morphology of the quasi‐2D films to achieve efficient energy transfer, which is a critical requirement for light‐emitting devices.

Lei, Lei↗
DOE OSTI2020

Surface Ligand Management Aided by a Secondary Amine Enables Increased Synthesis Yield of CsPbI 3 Perovskite Quantum Dots and High Photovoltaic Performance

Lead-halide perovskite quantum dots (PQDs) or more broadly, nanocrystals possess advantageous features for solution-processed photovoltaic devices. The nanocrystal surface ligands play a crucial role in the transport of photogenerated carriers and ultimately affect the overall performance of PQD solar cells. Here, significantly improved CsPbI 3 PQD synthetic yield and solar-cell performance through surface ligand management are demonstrated. The treatment of a secondary amine, di- n -propylamine (DPA), provides a mild and efficient approach to control the surface ligand density of PQDs, which has an apparently different working mechanism compared to previously reported surface treatments. Using an optimal DPA concentration, the treatment can simultaneously remove both long-chain insulating surface ligands of oleic acid and oleylamine, even for unpurified PQDs with high ligand density. As a result, the electrical coupling between PQDs is enhanced, leading to improved charge transport, reduced carrier recombination, and a high power conversion efficiency approaching 15% for CsPbI 3 -PQD-based solar cells. In addition, the production yield of CsPbI 3 PQDs can be increased by a factor of 8. These results highlight the importance of developing new ligand-management strategies, specifically for emerging PQDs to achieve scalable and high-performance perovskite-based optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Blading Phase–Pure Formamidinium–Alloyed Perovskites for High–Efficiency Solar Cells with Low Photovoltage Deficit and Improved Stability

Currently, blade-coated perovskite solar cells (PSCs) with high power conversion efficiencies (PCEs), i.e. greater than 20%, normally employ methylammonium lead tri-iodide with a sub-optimal bandgap. Alloyed perovskites with formamidinium (FA) cation have narrower bandgap and thus enhance device photocurrent. However, FA-alloyed perovskites show low phase stability and high moisture sensitivity. Here, we report that incorporating 0.83 molar percent organic halide salts (OHs) into the perovskite inks enables phase-pure, highly crystalline FA-alloyed perovskites with extraordinary optoelectronic properties. Here, the OH molecules modulate the crystal growth, enhance the phase stability, passivate ionic defects at the surface and/or grain boundaries, and enhance the moisture stability of the perovskite film. We demonstrate a high efficiency of 22.0% under 1 sun illumination for blade-coated PSCs with an open-circuit voltage of 1.18 V, corresponding to a very small voltage deficit of 0.33 V, and significantly improved operational stability with 96% of the initial efficiency retained under one sun illumination for 500 hours.

14 SOLAR ENERGY↗
DOE OSTI2020

Guanidinium-Assisted Surface Matrix Engineering for Highly Efficient Perovskite Quantum Dot Photovoltaics

Metal halide perovskite quantum dots (Pe-QDs) are of great interest in new-generation photovoltaics (PVs). However, it remains challenging in the construction of conductive and intact Pe-QD films to maximize their functionality. Herein, a ligand-assisted surface matrix strategy to engineer the surface and packing states of Pe-QD solids is demonstrated by a mild thermal annealing treatment after ligand exchange processing (referred to as “LE-TA”) triggered by guanidinium thiocyanate. The “LE-TA” method induces the formation of surface matrix on CsPbI 3 QDs, which is dominated by the cationic guanidinium (GA+) rather than the SCN-, maintaining the intact cubic structure and facilitating interparticle electrical interaction of QD solids. Consequently, the GA-matrix-confined CsPbI 3 QDs exhibit remarkably enhanced charge mobility and carrier diffusion length compared to control ones, leading to a champion power conversion efficiency of 15.21% when assembled in PVs, which is one of the highest among all Pe-QD solar cells. Additionally, the “LE-TA” method shows similar effects when applied to other Pe-QD PV systems like CsPbBr 3 and FAPbI 3 (FA = formamidinium), indicating its versatility in regulating the surfaces of various Pe-QDs. This work may afford new guidelines to construct electrically conductive and structurally intact Pe-QD solids for efficient optoelectronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

In-situ Grazing-Incidence Wide-Angle Scattering Reveals Mechanisms for Phase Distribution and Disorientation in 2D Halide Perovskite Films

Two-dimensional (2D) hybrid halide perovskites with the formula (A') 2 (A) n-1 Pb n I 3n+1 have remarkable stability and promising efficiency in photovoltaic and optoelectronic devices, yet fundamental understanding of film formation, key to optimizing these devices, is lacking. In this study, in-situ grazing-incidence wide-angle X-ray scattering (GIWAXS) is used to monitor film formation during spin-coating. This elucidates the general film formation mechanism of 2D halide perovskites during one-step spin-coating. There are three stages of film formation: sol-gel, oriented 3D, and 2D. Three precursor phases form during the sol-gel stage and transform to perovskite, first giving a highly oriented 3D-like phase at the air/liquid interface followed by subsequent nucleations forming slightly less oriented 2D perovskite. Furthermore, heating before crystallization leads to fewer nucleations and faster removal of the precursors, improving orientation. This outlines the primary causes of phase distribution and perpendicular orientation in 2D perovskite films and paves the way for rationally designed film fabrication techniques.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Choose Your Own Adventure: Fabrication of Monolithic All-Perovskite Tandem Photovoltaics

Metal halide perovskites (MHPs) have transfixed the photovoltaic (PV) community due to their outstanding and tunable optoelectronic properties coupled to demonstrations of high-power conversion efficiencies (PCE) at a range of bandgaps. This has motivated the field to push perovskites to reach the highest possible performance. One way to increase the efficiency is by fabricating multijunction solar cells, which can split the solar spectrum, reducing thermalization loss. Low-cost all-perovskite tandems have a real chance to soon exceed 30% PCE, which could transform the PV industry. Achieving this goal requires the identification of perovskite sub-cells that are both highly efficient and can be effectively integrated. In this review, it is discussed how to navigate the multiple-choice adventure in choosing between the myriad of options and considerations present when deciding what perovskite materials, contact layers, and processing tools to use. Some of the potential fabrication pitfalls often encountered in MHP based tandem PVs are highlighted, so that they can hopefully be avoided in the future.

14 SOLAR ENERGY↗
DOE OSTI2020

Ultrafast Exciton Transport with a Long Diffusion Length in Layered Perovskites with Organic Cation Functionalization

Abstract Layered perovskites have been employed for various optoelectronic devices including solar cells and light‐emitting diodes for improved stability, which need exciton transport along both the in‐plane and the out‐of‐plane directions. However, it is not clear yet what determines the exciton transport along the in‐plane direction, which is important to understand its impact toward electronic devices. Here, by employing both steady‐state and transient photoluminescence mapping, it is found that in‐plane exciton diffusivities in layered perovskites are sensitive to both the number of layers and organic cations. Apart from exciton–phonon coupling, the octahedral distortion is revealed to significantly affect the exciton diffusion process, determined by temperature‐dependent photoluminescence, light‐intensity‐dependent time‐resolved photoluminescence, and density function theory calculations. A simple fluorine substitution to phenethylammonium for the organic cations to tune the structural rigidity and octahedral distortion yields a record exciton diffusivity of 1.91 cm 2 s −1 and a diffusion length of 405 nm along the in‐plane direction. This study provides guidance to manipulate exciton diffusion by modifying organic cations in layered perovskites.

Xiao, Xun↗