Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “network solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

An RNA Aptamer Capable of Forming a Hydrogel by Self-Assembly

Hydrogels are supramolecular assemblies with both solute transport properties like liquids and mechanical properties like elastomers. To date, every type of biomolecules except ribonucleic acid (RNA), is capable of forming a hydrogel. Here, we report an RNA that forms a hydrogel by self-assembly. This RNA is originally identified by systematic evolution of ligands by exponential enrichment (SELEX) to enhance the activity of α-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid (AMPA) receptors as a potential RNA drug for the treatment of cognitive disorders. The RNA hydrogel exhibits an elastic modulus plateau on the order of 102 Pa and shows dynamic RNA chain interactions with relaxation behaviors similar to living wormlike micellar solutions. Small-angle X-ray scattering and cryogenic electron microscopy characterization support the RNA network structures. Here, by sequence mutation and rheological measurements, we reveal two key sequence motifs in the RNA responsible for intermolecular recognition and the formation of a polymer network by self-assembly.

59 BASIC BIOLOGICAL SCIENCES↗

Improving Energy Transfer within Metal–Organic Frameworks by Aligning Linker Transition Dipoles along the Framework Axis

Crystalline metal-organic frameworks (MOFs) can assemble chromophoric molecules into a wide range of spatial arrangements, which are controlled by the MOF topology. Like natural light-harvesting complexes (LHCs), the precise arrangement modulates interchromophoric interactions, in turn determining excitonic behavior and migration dynamics. To unveil the key factors that control efficient exciton displacements within MOFs, we first developed linkers with low electronic symmetry (as defined by large transition dipoles) and then assembled them into MOFs. These linkers possess extended conjugation along one molecular axis, engendering low optical bandgaps and improved oscillator strength for their lowest-energy transition (S 0 → S 1 ). This enhances absorption-emission spectral overlap and boosts the efficiency of Forster resonance energy transfer, which was observed experimentally by a sizable decrease in emission quantum yield (QY), accompanied by a faster population decay profile. We find that MOFs that orient these elongated linkers along their asymmetric pore channel, e.g., the hexagonal pores in an xly network, manifested >50% decrease in their emission QY with faster decay profiles relative to their corresponding solution dissolved linkers. This is due to an efficient migration of photogenerated excitons at the crystallite peripheral sites to internal sites, which was facilitated by polarized absorption-emission overlap among the parallelly aligned linkers. In contrast, symmetric MOFs, such as those with sqc-a topological net, orient elongated linkers along two perpendicular crystal axes, which hinders efficient exciton migration. This study underscores that MOFs are promising to develop artificial LHCs, but that to achieve an efficient exciton displacement, appropriate topology-guided assembly is required to fully realize the true potential of linkers with low electronic symmetry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pathways to fluorescence via restriction of intramolecular motion in substituted tetraphenylethylenes

The design of materials with enhanced luminescence properties is a fast-developing field due to the potential applicability of these materials as light-emitting diodes or for bioimaging. A transparent way to enhance the emission properties of interesting molecular candidates is blocking competing and unproductive non-radiative relaxation pathways by the restriction of intramolecular motions. Rationalized functionalization is an important possibility to achieve such restrictions. Using time-dependent density functional theory (TD-DFT) based on the ωB97XD functional and the semiempirical tight-binding method including long-range corrections (TD-LC-DFTB), this work investigates the effect of functionalization of the paradigmatic tetraphenylethylene (TPE) on achieving restricted access to conical intersections (RACI). Photodynamical surface hopping simulations have been performed on a larger set of compounds including TPE and ten functionalized TPE compounds. Functionalization has been achieved by means of electron-withdrawing groups, bulky groups which block the relaxation channels via steric hindrance and groups capable of forming strong hydrogen bonds, which restrict the motion via the formation of hydrogen bond channels. Most of the investigated functionalized TPE candidates show ultrafast deactivation to the ground state due to their still existing structural flexibility, but two examples, one containing –CN and –CF 3 groups and a second characterized by a network of hydrogen bonds, have been identified as interesting candidates for creating efficient luminescence properties in solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Real-Time Feedback-Based Optimization of Distribution Grids: A Unified Approach

This paper develops an algorithmic framework for real-time optimization of distribution-level distributed energy resources (DERs). The framework optimizes the operation of both DERs that are individually controllable and groups of DERs (i.e., aggregations) that are jointly controlled at an electrical point of connection. From an electrical standpoint, wye and delta single- and multi-phase connections are accounted for. The algorithm enables (groups of) DERs to pursue given performance objectives, while adjusting their (aggregate) powers to respond to services requested by grid operators and to maintain electrical quantities within engineering limits. The design of the algorithm leverages a time-varying bi-level problem formulation capturing various performance objectives and engineering constraints, and an online implementation of primal-dual projected-gradient methods. The gradient steps are suitably modified to accommodate appropriate measurements from the distribution network and the DERs. Stability and convergence claims are established in terms of tracking of the solution of the time-varying optimization problem. Finally, the method is tested in a realistic distribution.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Scalable Transparent Checkpoint-Restart of Global Address Space Applications on Virtual Machines over Infiniband

Checkpoint-Restart is one of the most used software approaches to achieve fault-tolerance in high-end clusters. While standard techniques typically focus on user-level solutions, the advent of virtualization software has enabled efficient and transparent system-level approaches. In this paper, we present a scalable transparent system-level solution to address fault-tolerance for applications based on global address space (GAS) programming models on Infiniband clusters. In addition to handling communication, the solution addresses transparent checkpoint of user-generated files. We exploit the support for the Infiniband network in the Xen virtual machine environment. We have developed a version of the Aggregate Remote Memory Copy Interface (ARMCI) one-sided communication library capable of suspending and resuming applications. We present efficient and scalable mechanisms to distribute checkpoint requests and to backup virtual machines memory images and file systems. We tested our approach in the context of NWChem, a popular computational chemistry suite. We demonstrated that NWChem can be executed, without any modification to the source code, on a virtualized 8-node cluster with very little overhead (below 3%). We observe that the total checkpoint time is limited by disk I/O. Finally, we measured system-size depended components of the checkpoint time on up to 1024 cores (128 nodes), demonstrating the scalability of our approach in medium/large-scale systems.

97 MATHEMATICS AND COMPUTING↗

Python ISMAGS subgraph isomorphism algorithm

SAND2022-14468 O The Python ISMAGS subgraph isomorphism algorithm is a translation of a java-based algorithm. It used for finding unique occurrences of a motif subgraph within a larger network graph. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

DeBonis, Mark↗

ZPAL v.1.0.0

SAND2024-01003O ZPAL is a Python software development kit designed for use by network automation engineers. It is an application programming interface (API) wrapper that is compatible with ZPE System's Nodegrid API. ZPE produces networking equipment. ZPAL simplifies connections to the ZPE Nodegrid API and makes configuration changes on the associated networking equipment. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Hill, Roscoe↗

Bayesian OED for Seismic Monitoring

SAND2024-13870O The Bayesian OED (Optimal Experiment Design) for Seismic Monitoring code provides the tools to analyze and optimize seismic monitoring networks using Bayesian OED. This method designs a utility function for experiments (network designs) using network analysis and network optimization. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Catanach, Thomas↗

scANN

SAND2025-00656O scANN, also known as sampling by coinflips artificial neural networks, is a software tool that estimates uncertainty in artificial intelligence by performing Monte Carlo analysis on the weight matrices of feedforward neural networks. This computationally intensive process aims to explore the potential value added by future probabilistic hardware. The program’s output helps researchers gain insights into how probabilistic neural networks work. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

SciDAC↗

Thermal Conductivity of a Novel Salt-Hydrogel Complex as a Phase Change Material for Building Thermal Management

Use of electricity for space heating, ventilation and air conditioning in buildings may be better managed through temporary energy storage. Compared with electrochemical storage, the levelized cost of thermal energy storage systems can be lower depending on geographical location and thermophysical properties [1]. In any phase change material (PCM), the rate of absorption and release of thermal energy increases with higher thermal conductivity [2]. However, leading PCMs like paraffin waxes have thermal conductivities on the order of 0.1 W/mK. Glauber’s salt, a salt hydrate, possesses a relatively high thermal conductivity but suffers from supercooling and phase segregation. Research has shown that polymer-based composites with salt hydrates can prevent phase segregation and limit supercooling over hundreds of cycles [3] though the thermal conductivity of the composite may be reduced leading to low energy storage rates. Here, we report thermal conductivity measurements on polymer hydrogels which are stable in solutions of Glauber’s salt. To measure thermal conductivity of soft gels, we use a 3-omega method [4] where heat flows bidirectionally through a substrate below and through a gel placed on top. This suits measurements of both gels and liquids unlike transient plane heat source or transient hot wire methods. We report measurements of thermal conductivity of salt-hydrogel complexes as a function of temperature, cross-linking and salt concentration. In addition, we present modeling of thermal conductivity of sodium sulfate solutions with available theories. We finally employ polarized optical microscopy to observe inside the transparent hydrogel networks, showing that precipitating crystals may influence thermal conductivity measurements for high salt concentrations. Our thermal conductivity results combined with enthalpy of phase change, mass density and specific heat are essential to accurately design thermal storage systems for energy-efficient buildings.

composite, thermal conductivity↗

Co-Continuous Phase Nanofiber Composites

We report on the development of a co-continuous phase composite with a polyacrylonitrile (PAN nanofiber network integrated into an acrylonitrile-butadiene-styrene (ABS) matrix that offers improved mechanical strength. Homogeneous dispersion of nanomaterials in a matrix can be challenging and typically involves mechanical mixing or chemical modification. This work overcomes this obstacle by taking an inverse approach in that a nanoscale network is synthesized then infiltrated with polymer instead of attempting to disperse the nanomaterial in the polymer. This not only enables excellent homogeneity but also allows the nanoscale phase to be continuous throughout the composite. Here, PAN is electrospun to form a random network of nanofibers having diameters of roughly 200 nm, which is then infiltrated with ABS using solution processing. By optimizing the heat treatments and ABS concentrations, the tensile strength and elastic modulus were improved by 208% and 313%, respectively, as compared to the bare PAN nanofibers. Since there has been significant previous research efforts on electrospinning polymers, many different nanofiber and polymer systems can be made into composites using the methodology established in this work. Therefore, this research offers a new route to create a co-continuous composite with the aim to replace some existing fiber reinforced composites.

Bowland, Christopher↗

New Uranyl Open Framework and Sheet Compounds Formed via In-Situ Protonation of Piperazine by Phosphorous Acid

Two new uranyl compounds were hydrothermally synthesized employing piperazine as an organic templating agent. The piperazine was protonated in-situ by phosphorous acid, forming the piperazinium dication featured in these compounds. The two new structures presented here are a uranyl phosphite 2D sheet and a 3D uranyl mixed phosphite–phosphate network with cation occupied channels. Both included strong hydrogen bonding from the piperazinium cation to the uranyl phosphite or mixed phosphite–phosphate network. These two structures can be reliably formed through careful control of pH of the starting solution and the reaction duration. The piperazinium uranyl phosphite compound was the latest in a family of uranyl phosphites, and demonstrates the structural versatility of this combination. The mixed phosphite–phosphate compound builds on hydrothermal redox chemistry, illustrating the variety of compounds that can be isolated by exploiting in-situ redox processes to elucidate new uranium structure types.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Precision time distribution within a deep space communications complex

The Precision Time Distribution System (PTDS) at the Golstone Deep Space Communications Complex is a practical application of existing technology to the solution of a local problem. The problem was to synchronize four station timing systems to a master source with a relative accuracy consistently and significantly better than 10 microseconds. The solution involved combining a precision timing source, an automatic error detection assembly and a microwave distribution network into an operational system. Upon activation of the completed PTDS two years ago, synchronization accuracy at Goldstone (two station relative) was improved by an order of magnitude. It is felt that the validation of the PTDS mechanization is now completed. Other facilities which have site dispersion and synchronization accuracy requirements similar to Goldstone may find the PTDS mechanization useful in solving their problem. At present, the two station relative synchronization accuracy at Goldstone is better than one microsecond.

Curtright, J. B.↗

Viking extended mission support

Deep Space Network tracking activities for the Viking mission are reported. Several orbiter and lander problems and their solutions are discussed. Tracking support data include the number of commands transmitted by month, tracking time in hours, and telemetry intermediate data record performance. A Viking mission profile is also given.

Gillette, R. L.↗

Localization of toroidal motion and shear heating in 3-D high Rayleigh number convection with temperature-dependent viscosity

We have applied spectral-transform methods to study three-dimensional thermal convection with temperature-dependent viscosity. The viscosity varies exponentially with the form exp(-BT), where B controls the viscosity contrast and T is temperature. Solutions for high Rayleigh numbers, up to an effective Ra of 6.25 x 10(exp 6), have been obtained for an aspect-ratio of 5x5x1 and a viscosity contrast of 25. Solutions show the localization of toroidal velocity fields with increasing vigor of convection to a coherent network of shear-zones. Viscous dissipation increases with Rayleigh number and is particularly strong in regions of convergent flows and shear deformation. A time-varying depth-dependent mean-flow is generated because of the correlation between laterally varying viscosity and velocity gradients.

Balachandar, S.↗

Precision orbit determination using the Tracking and Data Relay Satellite System (TDRSS)

The growth of the Tracking and Data Relay Satellite System (TDRSS) is the result of a greater reliance on the systems to provide nearly global coverage for relaying data from environmental satellites and to reduce or eliminate the reliance on global networks of tracking ground stations. Tracking data collected by TDRSS is often used to compute orbital solutions for moperational mission requirements. Investigations are in progress that seek to assess the feasibility of extending the use of tracking data collected by TDRSS as a means for computing precise orbital solutions. Specifically, this investigation will use covariance analysis techniques to evaluate this extended capability as applied to the TOPEX/Poseidon mission. This study will complement other investigations which carry out similar assessments of TDRSS using actual tracking data. This paper presents some preliminary results for Cycle 5 of the TOPEX/Poseidon mission using simulated two-way range-rate measurements.

Roesset, P.↗

Constrained Graph Optimization: Interdiction and Preservation Problems

The maximum flow, shortest path, and maximum matching problems are a set of basic graph problems that are critical in theoretical computer science and applications. Constrained graph optimization, a variation of these basic graph problems involving modification of the underlying graph, is equally important but sometimes significantly harder. In particular, one can explore these optimization problems with additional cost constraints. In the preservation case, the optimizer has a budget to preserve vertices or edges of a graph, preventing them from being deleted. The optimizer wants to find the best set of preserved edges/vertices in which the cost constraints are satisfied and the basic graph problems are optimized. For example, in shortest path preservation, the optimizer wants to find a set of edges/vertices within which the shortest path between two predetermined points is smallest. In interdiction problems, one deletes vertices or edges from the graph with a particular cost in order to impede the basic graph problems as much as possible (for example, delete edges/vertices to maximize the shortest path between two predetermined vertices). Applications of preservation problems include optimal road maintenance, power grid maintenance, and job scheduling, while interdiction problems are related to drug trafficking prevention, network stability assessment, and counterterrorism. Computational hardness results are presented, along with heuristic methods for approximating solutions to the matching interdiction problem. Also, efficient algorithms are presented for special cases of graphs, including on planar graphs. The graphs in many of the listed applications are planar, so these algorithms have important practical implications.

97 MATHEMATICS AND COMPUTING↗

Accelerating Transitions to Zero Carbon Power Systems

As power systems evolve, becoming increasingly renewable, distributed, dynamic, and digital, managing them becomes ever more challenging and complex. System operators serve as the "air traffic controllers" for electricity grids, working to balance supply and demand, manage evolving electricity markets, and ensure the safety and reliability of electricity systems. To adapt to the rapidly changing energy landscape and support the transition to modern, zero carbon power systems, system operators must develop and adopt new technologies, approaches, and frameworks. The Global Power System Transformation (G-PST) Consortium is a network of system operators, research institutions, and industry partners working to accelerate and scale the technical solutions required to transform our world's power systems. By developing and sharing robust models and tools, research and demonstration results, knowledge, and innovation, the G-PST Consortium is empowering system operators to transition to 100% renewable energy while ensuring the reliability, safety, and cost-effectiveness of grid operations.

ENERGY PLANNING, POLICY, AND ECONOMY,POWER TRANSMI↗