Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multiple precision”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Accurate gravities of F, G, and K stars from high resolution spectra without external constraints

We demonstrate a new procedure to derive accurate and precise surface gravities from high resolution spectra without the use of external constraints. Our analysis utilizes Spectroscopy Made Easy with robust spectral line constraints and uses an iterative process to mitigate degeneracies in the fitting process. We adopt an updated radiative transfer code, a new treatment for neutral perturber broadening, a line list with multiple gravity constraints and separate fitting for global stellar properties and abundance determinations. To investigate the sources of temperature dependent trends in determining log g noted in previous studies, we obtained Keck HIRES spectra of 42 Kepler asteroseismic stars. In comparison to asteroseismically determined log g our spectroscopic analysis has a constant offset of 0.01 dex with a rms scatter of 0.05 dex. We also analyzed 30 spectra which had published surface gravities determined using the a/R{sub ∗} technique from planetary transits and found a constant offset of 0.06 dex and rms scatter of 0.07 dex. The two samples covered effective temperatures between 5000 and 6700 K with log g between 3.7 and 4.6.

79 ASTRONOMY AND ASTROPHYSICS↗

Laser resonance ionization spectroscopy of thorium

High-lying Rydberg and autoionizing (AI) states of thorium (Th) have been studied via resonance laser ionization spectroscopy at both TRIUMF Canada’s particle accelerator center and Oak Ridge National Lab (ORNL). Multiple Rydberg series converging to the ionization potential (IP) were observed via different stepwise laser excitation schemes and were assigned to be the 6d 2 7s ( 4 F 3/2 ) np, nd, and nf series. Analysis of these series enabled the determination of the IP to be 50 868.735(54) cm −1 , which improved the precision by two orders of magnitude over the current adopted NIST value of 50 867(2) cm −1 . Additionally, four AI Rydberg series were identified and assigned to nf and nd series converging to the 6d 2 7s 4 F 5/2 and 6d7s 2 2 D 3/2 metastable states of Th + . In conclusion, the measured energies of the Rydberg and AI Rydberg states are reported, and observed perturbations within the series are discussed.

Rydberg series↗

Enhanced material identification via momentum-integrated muon scattering tomography

Cosmic ray muons, originating from interactions in the upper atmosphere, possess high energy and unique penetrative capabilities suitable for non-traditional radiographic inspection. This study explores their application in various fields such as nuclear fuel cask monitoring, nuclear reactor imaging, and archaeology, leveraging the principle of multiple Coulomb scattering for imaging dense materials. While muon scattering tomography has shown promise, accurately measuring muon momentum remains challenging. This research introduces the Momentum Integrated Point-of-Closest Approach (mPoCA) algorithm, integrating muon momentum data into the traditional Point-of-Closest Approach (PoCA) framework. Utilizing the Cherenkov muon spectrometer, renowned for precise muon momentum estimation, the mPoCA algorithm offers a novel imaging approach. Simulations conducted with GEANT4 evaluate the mPoCA algorithm’s performance against the standard PoCA method, demonstrating superior image resolution and enhanced material identification capabilities, particularly in distinguishing materials like uranium and lead. These findings underscore the potential of the mPoCA algorithm for advancing muon scattering tomography applications.

36 MATERIALS SCIENCE↗

Models for estimating runway landing capacity with Microwave Landing System (MLS)

A model is developed which is capable of computing the ultimate landing runway capacity, under ILS and MLS conditions, when aircraft population characteristics and air traffic control separation rules are given. This model can be applied in situations when only a horizontal separation between aircraft approaching a runway is allowed, as well as when both vertical and horizontal separations are possible. It is assumed that the system is free of errors, that is that aircraft arrive at specified points along the prescribed flight path precisely when the controllers intend for them to arrive at these points. Although in the real world there is no such thing as an error-free system, the assumption is adequate for a qualitative comparison of MLS with ILS. Results suggest that an increase in runway landing capacity, caused by introducing the MLS multiple approach paths, is to be expected only when an aircraft population consists of aircraft with significantly differing approach speeds and particularly in situations when vertical separation can be applied. Vertical separation can only be applied if one of the types of aircraft in the mix has a very steep descent angle.

Tosic, V.↗

Vacuum MOCVD fabrication of high efficience cells

Vacuum metal-organic-chemical-vapor-deposition (MOCVD) is a new fabrication process with improved safety and easier scalability due to its metal rather than glass construction and its uniform multiport gas injection system. It uses source materials more efficiently than other methods because the vacuum molecular flow conditions allow the high sticking coefficient reactants to reach the substrates as undeflected molecular beams and the hot chamber walls cause the low sticking coefficient reactants to bounce off the walls and interact with the substrates many times. This high source utilization reduces the materials costs power device and substantially decreases the amounts of toxic materials that must be handled as process effluents. The molecular beams allow precise growth control. With improved source purifications, vacuum MOCVD has provided p GaAs layers with 10-micron minority carrier diffusion lengths and GaAs and GaAsSb solar cells with 20% AMO efficiencies at 59X and 99X sunlight concentration ratios. Mechanical stacking has been identified as the quickest, most direct and logical path to stacked multiple-junction solar cells that perform better than the best single-junction devices. The mechanical stack is configured for immediate use in solar arrays and allows interconnections that improve the system end-of-life performance in space.

Partain, L. D.↗

Multilayer Dielectric Transmissive Optical Phase Modulator

A multilayer dielectric device has been fabricated as a prototype of a low-loss, low-distortion, transmissive optical phase modulator that would provide as much as a full cycle of phase change for all frequency components of a transmitted optical pulse over a frequency band as wide as 6.3 THz. Arrays of devices like this one could be an alternative to the arrays of mechanically actuated phase-control optics (adaptive optics) that have heretofore been used to correct for wave-front distortions in highly precise optical systems. Potential applications for these high-speed wave-front-control arrays of devices include agile beam steering, optical communications, optical metrology, optical tracking and targeting, directional optical ranging, and interferometric astronomy. The device concept is based on the same principle as that of band-pass interference filters made of multiple dielectric layers with fractional-wavelength thicknesses, except that here there is an additional focus on obtaining the desired spectral phase profile in addition to the device s spectral transmission profile. The device includes a GaAs substrate, on which there is deposited a stack of GaAs layers alternating with AlAs layers, amounting to a total of 91 layers. The design thicknesses of the layers range from 10 nm to greater than 1 micrometer. The number of layers and the thickness of each layer were chosen in a computational optimization process in which the wavelength dependences of the indices of refraction of GaAs and AlAs were taken into account as the design was iterated to maximize the transmission and minimize the group-velocity dispersion for a wavelength band wide enough to include all significant spectral components of the pulsed optical signal to be phase modulated.

Keys, Andrew Scott↗

Probing the Quark Sea and Gluons: the Electron-Ion Collider Projects

EIC is the generic name for the nuclear science-driven Electron-Ion Collider presently considered in the US. Such an EIC would be the world’s first polarized electron-proton collider, and the world’s first e-A collider. Very little remains known about the dynamical basis of the structure of hadrons and nuclei in terms of the fundamental quarks and gluons of Quantum Chromodynamics (QCD). A large community effort to sharpen a compelling nuclear science case for an EIC occurred during a ten-week program taking place at the Institute for Nuclear Theory (INT) in Seattle from September 13 to November 19, 2010. The critical capabilities of a stage-I EIC are a range in center-of-mass energies from 20 to 70 GeV and variable, full polarization of electrons and light ions (the latter both longitudinal and transverse), ion species up to A=200 or so, multiple interaction regions, and a high luminosity of about 10{sup 34} electron-nucleons per cm{sup 2} and per second. The physics program of such a stage-I EIC encompass inclusive measurements (ep/A{yields}e'+X), which require detection of the scattered lepon and/or the full scattered hadronic debris with high precision, semi-inclusive processes (ep/A{yields}e'+h+X), which require detection in coincidence with the scattered lepton of at least one (current or target region) hadron; and exclusive processes (ep/A{yields}e'+N'/A'+{gamma}/m), which require detection of all particles in the reaction. The main science themes of an EIC are to i) map the spin and spatial structure of quarks and gluons in nucleons, ii) discover the collective effects of gluons in atomic nuclei, and (iii) understand the emergence of hadronic matter from color charge. In addition, there are opportunities at an EIC for fundamental symmetry and nucleon structure measurements using the electroweak probe. To truly make headway to image the sea quarks and gluons in nucleons and nuclei, the EIC needs high luminosity over a range of energies as more exclusive scattering probabilities are small, and any integrated detector/interaction region design needs to provide uniform coverage to detect spectator and diffractive products. This is because e-p and even more e-A colliders have a large fraction of their science related to what happens to the nucleon or ion beams. As a result, the philosophy of integration of complex detectors into an extended interaction region faces challenging constraints. Designs feature crossing angles between the protons or heavy ions during collisions with electrons, to remove potential problems for the detector induced by synchrotron radiation. Designs allocate quite some detector space before the final-focus ion quads, at the cost of luminosity, given that uniform detection coverage is a must for deep exclusive and diffractive processes. The integrated EIC detector/interaction region design at JLab focused on establishing full acceptance for such processes over a wide range of proton energies (20-100 GeV) with well achievable interaction region magnets. The detector design at BNL uses the higher ion beam energies to achieve good detection efficiency for instance for protons following a DVCS reaction, for proton beam energies starting from 100 GeV. Following a recommendation of the 2007 US Nuclear Science Long-Range Planning effort, the DOE Office of Nuclear Physics (DOE/NP) has allocated accelerator R&D funds to lay the foundation for a polarized EIC. BNL, in association with JLab and DOE/NP, has also established a generic detector R&D program to address the scientific requirements for measurements at a future EIC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dark Energy Survey Year 3 results: optimized $w$CDM simulation-based inference with weak lensing map-level hybrid statistics

We present cosmological constraints from the Dark Energy Survey Year 3 (DES Y3) weak lensing data using hierarchical hybrid statistics within a Bayesian simulation-based inference framework that is based on the Gower Street simulations. To maximize the precision of the inference, we have developed a new, information-theory based, data compression of the weak lensing maps to just seven highly informative summary statistics. The hybrid scheme exploits the high information content of the power spectrum, compressing both the power spectrum and neural-based summaries that are designed to extract further information. Our simulation-based approach enables principled forward modelling of all major sources of systematic uncertainty and survey properties into realistic mock observations, including the survey mask, photometric redshift uncertainties, intrinsic galaxy alignments, multiplicative shear calibration bias, source galaxy clustering, non-Gaussian shape noise, and non-linear structure formation. The summary statistics are then used in a Bayesian simulation-based inference pipeline. The inference is validated through coverage tests and checks for robustness against baryonic feedback. Assuming a $w$CDM cosmology, our analysis yields $S_8 = 0.808 \pm 0.017$, $Ω_{\rm m} = 0.325 \pm 0.024$, and $w < -0.766$ (marginalized posterior 68 per cent credible intervals). This rigorous combination of information theory, physics- and neural network-based extreme data compression, and principled Bayesian analysis improves the figure of merit for $(Ω_{\rm m}, S_8, w)$ by 60 per cent over the previous state-of-the-art, and by almost a factor of 3 over two-point analyses of the same data. They are the most precise joint constraints on $(Ω_{\rm m}, S_8, w)$ from weak gravitational lensing data alone of any survey to date. We intend to apply this analysis to the more recent DES Y6 data.

Williamson, J. [University Coll. London]↗

Electron Mobility and Trapping in Ferrihydrite Nanoparticles

Iron is the most abundant transition metal in the Earth's crust, and naturally occurring iron oxide minerals play a commanding role in environmental redox reactions. Although iron oxide redox reactions are well studied, their precise mechanisms are not fully understood. Recent work has shown that these involve electron transfer pathways within the solid, suggesting that overall reaction rates could be dependent on electron mobility. Initial ultrafast spectroscopy studies of iron oxide nanoparticles sensitized by fluorescein derivatives supported a model for electron mobility based on polaronic hopping of electron charge carriers between iron sites, but the constitutive relationships between hopping mobilities and interfacial charge transfer processes has remained obscured. We developed a coarse-grained lattice Monte Carlo model to simulate the collective mobilities and lifetimes of these photoinjected electrons with respect to recombination with adsorbed dye molecules for the essential nanophase ferrihydrite, and tested predictions made by the simulations using pump-probe spectroscopy. We acquired optical transient absorption spectra as a function of particle size and under a variety of solution conditions, and used cryogenic transmission electron microscopy to determine the aggregation state of the nanoparticles. We observed biphasic electron recombination kinetics over timescales that spanned picoseconds to microseconds, the slower regime of which was fit with a stretched exponential decay function. The recombination rates were weakly affected by nanoparticle size and aggregation state, suspension pH, and the injection of multiple electrons per nanoparticle. We conclude that electron mobility indeed limits the rate of interfacial electron transfer in these systems with the slowest processes relating to escape from deep traps, the presence of which outweighs the influence of environmental factors such as pH-dependent surface charge.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Measurements of the magnetic field vector using multiple electromagnetically induced transparency resonances in Rb vapor

We study the dependence of electromagnetically induced transparency (EIT) resonance amplitudes on the external magnetic field direction in a linearly polarized bichromatic light (lin||lin) configuration in {sup 87}Rb vapor. We demonstrate that all seven resolvable EIT resonances exhibit maxima or minima at certain orientations of the laser polarization relative to the wave vector and magnetic field. This effect can be used for the development of a high-precision EIT vector magnetometer.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Temporal relationships among lunar crustal rocks

Temporal relationships among the three most common suites of lunar crustal rocks have been investigated by obtaining new high precision ages on Felsic/Alkali-suite Quartz monzodiorite Clast B from breccia 15405 and Magnesian-suite norite 78235/6/8/55/56 and comparing them to previously dated ferroan anorthosite sample 60025. The weighted average age of 4337.19 ± 0.49 Ma of 15405 Clast B is defined by zircon U-Pb and Pb-Pb ages as well as mineral isochron Sm-Nd and Nd-Nd ages. It is identical to the weighted average age for Apollo 17 norite 78235/6/8/55/56 of 4334.1 ± 3.5 Ma which is defined by Pb-Pb ages measured on baddeleyites in this investigation and less precise Pb-Pb and Sm-Nd ages reported in the literature. Both ages are ∼ 25 Ma younger than the weighted average of Sm-Nd and Pb-Pb ages reported in the literature on ferroan anorthosite 60025 of 4359.3 ± 2.3 Ma. The fact that ages of all three samples are defined by multiple U-Pb, Pb-Pb, Sm-Nd, and 142 Nd- 143 Nd chronometers provide confidence that they record the igneous crystallization history of the samples and do not represent disturbances or mixing lines with no temporal significance. Here, the extent to which these three ages represent broader scale magmatism is difficult to evaluate. Nevertheless, the age defined for 15405 Clast B, 78235/6/8/55/56, and 60025 are contemporaneous with the peak of ages observed in detrital zircons from the Apollo 12, 14, 15, and 17 landing sites (4340 ± 20 Ma), a Mg-suite Sm-Nd whole rock isochron defined by samples from Apollo 14, 15, 16, and 17 landing sites (4348 ± 25 Ma), and a Ferroan Anorthosite-suite Sm-Nd whole rock isochron defined by samples from the Apollo 15 and 16 landing sites (4354 ± 29 Ma). This implies that Ferroan Anorthosite-suite magmatism is temporally distinct and earlier than magmatism associated with the Mg-suite and the Felsic/Alkali-suite, as predicted by the lunar magma ocean model of lunar differentiation. The short 35 ± 10 Ma interval between primary ferroan anorthosite magmatism and secondary magmatism suggests that the lunar crust formed over a limited period of time. Although heat from decay of long-lived isotopes, large impacts, tidal heating associated with interactions between the Earth and Moon, and density driven overturn of the magma ocean have all been invoked to explain production of ancient secondary crustal magmatism, only tidal heating and cumulate overturn are consistent with the apparent short duration of secondary crustal magmatism and the great depth of crystallization implied for some Mg-suite samples. The initial ε 143 Nd values derived from the 15405 Clast B and 78238 Mg-suite norite isochrons, as well as a Mg-suite whole rock isochron are −0.23 ± 0.11, −0.27 ± 0.74, and −0.25 ± 0.09, respectively. They are identical within uncertainty indicating that Mg-suite and Felsic/Alkali-suite magmas were derived from materials that had the same time averaged Sm/Nd ratios since the formation of the solar system. This, combined with the contemporaneous nature of 15405 Clast B and 78235/6/8/55/56 Mg-suite norite, is consistent with evolution of both samples, and likely both magma suites, from a common source through closed system fractional crystallization or partial melting processes.

Chronology↗

DNA-Directed Non-Langmuir Deposition of Programmable Atom Equivalents

Particle assembly at interfaces via programmed DNA interactions allows for independent modification of both nanoparticle–surface interaction strength and the magnitude of interparticle repulsion. Together, these factors allow for modification of the deposited thin film morphology via alterations in DNA binding sequence. Importantly, both Langmuir and random sequential adsorption models yield insights into the thermodynamics of deposition but cannot fully explain particle coverage as a function of all relevant variables, indicating that the particle deposition mechanism for DNA-grafted colloids is more complex than prior adsorption phenomena. Here, it is shown that these deviations from standard behavior arise from the fact that each nanoparticle is attached to the surface via multiple weak DNA duplex interactions, enabling diffusion of adsorbed colloids across the substrate. Thus, surface migration of individual particles causes reorganization of the deposited monolayer, leading to the unusual behavior of coverage increasing at elevated temperatures that are just below the particle desorption temperature. The programmability of DNA-directed particle deposition therefore allows for precise control over the morphology of monolayer films, as well as the ability to generate crystalline materials with controllable surface roughness and grain size through layer-by-layer growth. As a result, the increased control over thin film morphology potentially enables tailoring of mechanical and optical properties and holds promise for use in a variety of applications.

59 BASIC BIOLOGICAL SCIENCES↗

Co6Se8(PEt3)6 superatoms as tunable chemical dopants for two-dimensional semiconductors

Abstract Electronic, optoelectronic, and other functionalities of semiconductors are controlled by the nature and density of carriers, and the location of the Fermi energy. Developing strategies to tune these parameters holds the key to precise control over semiconductors properties. We propose that ligand exchange on superatoms can offer a systematic strategy to vary these properties. We demonstrate this by considering a WSe 2 surface doped with ligated metal chalcogenide Co 6 Se 8 (PEt 3 ) 6 clusters. These superatoms are characterized by valence quantum states that can readily donate multiple electrons. We find that the WSe 2 support binds more strongly to the Co 6 Se 8 cluster than the PEt 3 ligand, so ligand exchange between the phosphine ligand and the WSe 2 support is energetically favorable. The metal chalcogenide superatoms serves as a donor that may transform the WSe 2 p-type film into an n-type semiconductor. The theoretical findings complement recent experiments where WSe 2 films with supported Co 6 Se 8 (PEt 3 ) 6 are indeed found to undergo a change in behavior from p- to n-type. We further show that by replacing the PEt 3 ligands by CO ligands, one can control the electronic character of the surface and deposited species.

36 MATERIALS SCIENCE↗

Compact steady-state and high-flux Falcon ion source for tests of plasma-facing materials

This paper describes the design and operation of the Falcon ion source. It is based on conventional design of anode layer thrusters. This ion source is a versatile, compact, affordable, and highly functional in the research field of the fusion materials. The reversed magnetic field configuration of the source allows precise focusing of the ion beam into small spot of Almost-Equal-To 3 mm and also provides the limited capabilities for impurity mass-separation. As the result, the source generates steady-state ion beam, which irradiates surface with high heat (0.3 - 21 MW m{sup -2}) and particle fluxes (4 Multiplication-Sign 10{sup 21}- 3 Multiplication-Sign 10{sup 23} m{sup -2}s{sup -1}), which approaches the upper limit for the flux range expected in ITER.

43 PARTICLE ACCELERATORS↗

Possible use of self-calibration to reduce systematic uncertainties in determining distance-redshift relation via gravitational radiation from merging binaries

By observing mergers of compact objects, future gravity wave experiments would measure the luminosity distance to a large number of sources to a high precision but not their redshifts. Given the directional sensitivity of an experiment, a fraction of such sources (gold plated) can be identified optically as single objects in the direction of the source. We show that if an approximate distance-redshift relation is known then it is possible to statistically resolve those sources that have multiple galaxies in the beam. We study the feasibility of using gold plated sources to iteratively resolve the unresolved sources, obtain the self-calibrated best possible distance-redshift relation and provide an analytical expression for the accuracy achievable. We derive the lower limit on the total number of sources that is needed to achieve this accuracy through self-calibration. We show that this limit depends exponentially on the beam width and give estimates for various experimental parameters representative of future gravitational wave experiments DECIGO and BBO.

79 ASTRONOMY AND ASTROPHYSICS↗

The mechanisms of catalysis and ligand binding for the SARS-CoV-2 NSP3 macrodomain from neutron and x-ray diffraction at room temperature

The nonstructural protein 3 (NSP3) macrodomain of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) (Mac1) removes adenosine diphosphate (ADP) ribosylation posttranslational modifications, playing a key role in the immune evasion capabilities of the virus responsible for the coronavirus disease 2019 pandemic. Here, we determined neutron and x-ray crystal structures of the SARS-CoV-2 NSP3 macrodomain using multiple crystal forms, temperatures, and pHs, across the apo and ADP-ribose–bound states. We characterize extensive solvation in the Mac1 active site and visualize how water networks reorganize upon binding of ADP-ribose and non-native ligands, inspiring strategies for displacing waters to increase the potency of Mac1 inhibitors. Determining the precise orientations of active site water molecules and the protonation states of key catalytic site residues by neutron crystallography suggests a catalytic mechanism for coronavirus macrodomains distinct from the substrate-assisted mechanism proposed for human MacroD2. These data provoke a reevaluation of macrodomain catalytic mechanisms and will guide the optimization of Mac1 inhibitors.

60 APPLIED LIFE SCIENCES↗