Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “materials Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Effect of flow field geometry on operating current density, capacity and performance of vanadium redox flow battery

We report that addition of flow fields to carbon paper electrodes in a vanadium redox flow battery (VRFB) can improve the peak power density through uniform distribution of electrolyte in the electrodes. However, it is unclear whether flow fields have a similar effect with graphite felt electrodes, as VRFBs with felt electrodes reported in literature show a large anomaly in obtained power density. In this work, we evaluate three flow fields; viz. serpentine, interdigitated and conventional (without flow pattern) type with felt electrodes and compare their performance with a serpentine flow field using carbon paper electrodes under identical experimental conditions. The conventional flow field provides highest energy efficiency (75%) followed by serpentine (64%) and interdigitated (55%) at 0.2 A cm -2 attributable to the deteriorating electrolyte distribution in the electrodes. Computation fluid dynamic simulations confirm the experimental finding of worsening electrolyte distribution (conventional < serpentine < interdigitated). A power density of 0.51 W cm -2 at 60 mL min -1 flow rate is obtained for serpentine and conventional flow fields with felt electrodes; comparable to the highest power density reported in literature for high performing zero-gap flow field architecture. Finally, this paper gives comprehensive insights on flow fields for VRFBs that can be extended to other flow batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ingeniously enhanced ferromagnetism in chemically-reduced 2D Ti 3 C 2 T X MXene

Chemical reduction is a facile and cost-effective technique for the modulation of the physical and chemical properties of nanomaterials. In this work, we demonstrate an enhancement of the magnetic behavior of Ti 3 C 2 T x MXene after its chemical reduction via l-ascorbic acid treatment. Small ferromagnetic loops have been observed below 50 K for Ti 3 C 2 T x prepared by hydrofluoric acid (HF) etching of Al layers from Ti 3 AlC 2 . Such a ferromagnetic ordering of spins was significantly enhanced via a chemical reduction of Ti 3 C 2 T x with l-ascorbic acid. Ferromagnetic hysteresis loops were observed for reduced Ti 3 C 2 T x (r-Ti 3 C 2 T x ) up to 150 K indicating a significant upshift of the paramagnetic to the ferromagnetic transition temperature, pushing towards room temperature. The enhancement of ferromagnetism and upshift of the ferromagnetic transition temperature could be attributed to the localized unpaired electron in Ti-3d orbital of the r-Ti 3 C 2 T x crystal and increase in the number of unsaturated Ti atoms upon l-ascorbic acid treatment. Chemical reduction via l-ascorbic acid treatment shows a promising pathway towards the modulation and enhancement of magnetism in various MXene materials for the development of 2D metallic soft ferromagnets and spintronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Mechanical characterization of Ti-6Al-4V titanium alloy at multiple length scales using spherical indentation stress-strain measurements

Recent advances in spherical indentation stress-strain protocols and analyses have demonstrated the capability for measuring reliably the local mechanical responses in polycrystalline metal samples at different length scales, ranging from sub-micron (regions within individual grains) to several hundreds of microns (regions covering several grains). These recent advances have now made it possible to study systematically the mechanical behavior of a single material system at different length scales, with tremendous potential to obtain new insights into the role of individual phases, interfaces, and other microscale constituents on the macroscale mechanical response of the material. In this paper, we report spherical indentation stress-strain measurements with different indenter sizes (microns to millimeters) on Ti-6Al-4V (Ti-64) which capture the mechanical response of single phase alpha-Ti-64, single colony (alpha-beta), few colonies, and many colonies of Ti-64. The results show that the average mechanical response (indentation modulus and yield strength) from multiple indentations remains relatively unchanged from single phase alpha to many colonies of Ti-64, while the variance in the response decreases with indenter size. In conclusion, the work-hardening response in indentation tests follows a similar behavior up to indentation zones of many colonies, which shows significantly higher work hardening rates.

36 MATERIALS SCIENCE↗
DOE OSTI2023

An emerging class of carbon materials: Synthesis and applications of carbon flowers

Porous carbon materials are widely applied in energy storage, gas adsorption, and catalysis applications because of their advantageous properties, such as high surface areas, tunable surface properties, chemical stability, high conductivity, and low cost. Recently, a flower-shaped carbon material, referred to as carbon flowers (CFs), has received attention as an emerging porous carbon material because of its unique shape. In this review, we summarize the synthetic strategies, characterization techniques, and formation mechanisms of CFs from various precursors. We also review the applications of CFs and their pros and cons. Last, we discuss challenges and perspectives for future development of CFs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Water additives improve the efficiency of violet perovskite light-emitting diodes

High external quantum efficiencies (EQEs) have been achieved for blue, green, red, and near-infrared perovskite light-emitting diodes (PeLEDs), and their energy efficiencies are approaching the efficiencies of III-V-based LEDs. Beyond the visible regime, ultraviolet light offers great promise for many applications such as disinfection. However, PeLEDs demonstrate poor performance in the violet/ultraviolet region, with reports of violet PeLED performance hindered by poor thin-film quality. In this work, we improve the uniformity of perovskite films by adding water into the precursor solution to engineer the crystallization process of spin-coated 2D perovskites. The resulting improved film uniformity, coupled with the reduction in nanoplate size, reduces leakage current and promotes faster recombination rates. The fabricated PeLEDs deliver bright violet emission at 408 nm with a maximum external quantum efficiency of 0.41%, a 5-fold increase over control devices. Furthermore, this work demonstrates viable steps toward cost-effective, efficient ultraviolet PeLEDs.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals

Metals can be processed to reach ultra-high strength, but usually at a drastic loss of ductility. Here, we review recent advances in overcoming this tradeoff, by purposely deploying heterogeneous nanostructures in an otherwise single-phase metal. Several structural designs are being explored, including bimodal, harmonic, lamellar, gradient, domain-dispersed, and hierarchical nanostructures. These seemingly distinct tactics share a unifying design principle in that the intentional structural heterogeneities induce non-homogeneous plastic deformation, and the nanometer-scale features dictate steep strain gradients, thereby enhancing strain hardening and consequently uniform tensile ductility at high flow stresses. Moreover, these heterogeneous nanostructures in metals play a role similar to multiple phases in complex alloys, functionally graded materials and composites, sharing common material design and mechanics principles. Our review advocates this broad vision to help guide future innovations towards a synergy between high strength and high ductility, through highlighting several recent designs as well as identifying outstanding challenges and opportunities.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Energy transduction ferroic materials

Ferroic materials and multiferroics, characterized by their ferroic orders, provide an efficient route for the coupling control of magnetic, mechanical, and electrical subsystems in energy transduction, which aims at converting one form of energy into another. A surge of interest in the ferroic coupling effect has stemmed from its potential use as a new versatile route for energy transduction. Here, the recent progress on the use of (multi)ferroic materials is reviewed, with special emphasis on the fundamental mechanisms that dictate the energy transduction process, including piezoelectricity, pyroelectricity, electrocaloric, magnetostriction, magnetocaloric, elastocaloric, magnetoelectricity, and emerging spin-charge conversion. Research on energy transduction ferroic materials paves the way for ubiquitous energy harvesting through magneto-mechano-electric-thermal coupling mechanisms. Lastly, a summary and the future prospective directions of this field are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Proximitized materials

Advances in scaling down heterostructures and having an improved interface quality together with atomically thin two-dimensional materials suggest a novel approach to systematically design materials. A given material can be transformed through proximity effects whereby it acquires properties of its neighbors, for example, becoming superconducting, magnetic, topologically nontrivial, or with an enhanced spin–orbit coupling. Such proximity effects not only complement the conventional methods of designing materials by doping or functionalization but also can overcome their various limitations. In proximitized materials, it is possible to realize properties that are not present in any constituent region of the considered heterostructure. While the focus is on magnetic and spin–orbit proximity effects with their applications in spintronics, the outlined principles also provide a broader framework for employing other proximity effects to tailor materials and realize novel phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Electric-field effect on photoluminescence of lead-halide perovskites

With the development of novel semiconductors for optoelectronic applications, new device functionalities utilizing unique characteristics of emerging materials can be particularly appealing. Here, we demonstrate a reversible control of photoluminescence (PL) emission from lead-halide perovskites achieved in perovskite electric-double-layer transistors. PL in several prototypical lead-halide perovskite compounds is shown to be reversibly tuned by a small gate voltage in the range ±1.2 V applied to the ionic-liquid gel on the perovskite surface, with the intensity modulation that can reach one to two orders of magnitude. This effect may be mediated by a reversible migration of oxygen ions affecting the crystal region near the interface with the ion gel. The resulting passivation (or activation) of non-radiative recombination centers (traps) by oxygen ions would then modulate the population of mobile photogenerated electrons and holes that give rise to PL, which is thus tuned with an electric “knob” (the gate) in these devices.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The working principle of hybrid perovskite gamma-ray photon counter

Gamma-ray spectroscopy that quantifies the gamma-ray energies is a critical technology widely needed in astrophysics, nuclear material detection and medical treatment. The key is to precisely count gamma-ray photons using sensitive detectors. In this paper, we investigate the operational principles of chlorine-doped methylammonium lead tribromide (MAPbBr 3-x Cl x ) perovskite single crystal detectors that can efficiently count gamma-ray photon events with electrical pulses. Specifically, we find the main dark current originates from the thermally activated electron injection from the impurities, and using high work function contacts can block out the dark noise thus allows for efficient pulse collection at higher electrical fields ~500 V/cm. As a result, we observe strong electrical pulses when exposing the detector under radioactive sources emitting gamma-ray photons at various energies. Our results also reveal the fundamental issues that prevent the reliable observation of photo-electric peak. This work suggest pathway towards energy resolved gamma-ray spectroscopy using perovskite crystal detectors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Quantitative nanoscale tracking of oxygen vacancy diffusion inside single ceria grains by in situ transmission electron microscopy

Oxygen vacancy formation and migration in ceria is critical to its electrochemical and catalytic properties in systems for chemical and energy transformation, but its quantification is rather challenging especially at atomic-scale because of disordered distribution. Here we report a rational approach to track oxygen vacancy diffusion in single grains of pure and Sm-doped ceria at -20 °C to 160 °C using in situ (scanning) transmission electron microscopy ((S)TEM). To create a gradient in oxygen vacancy concentration, a small region (~30 nm in diameter) inside a ceria grain is reduced to the C-type CeO 1.68 phase by the ionization or radiolysis effect of a high-energy electron beam. The evolution in oxygen vacancy concentration is then mapped through lattice expansion measurement using scanning nano-beam diffraction or 4D STEM at a spatial resolution better than 2 nm; this allows direct determination of local oxygen vacancy diffusion coefficients in a very small domain inside pure and Sm-doped ceria at different temperatures. Further, the activation energies for oxygen transport are determined to be 0.59, 0.66, 1.12, and 1.27 eV for pure CeO 2 , Ce 0.94 Sm 0.06 O 1.97 , Ce 0.89 Sm 0.11 O 1.945 , and Ce 0.8 Sm 0.2 O 1.9 , respectively, implying that activation energy increases due to impurity scattering. The results are qualitatively supported by density functional theory (DFT) calculations. In addition, our in situ TEM investigation reveals that dislocations impede oxygen vacancy diffusion by absorbing oxygen vacancies from the surrounding areas and pinning them locally. With more oxygen vacancies absorbed, dislocations show extended strain fields with local tensile zone sandwiched between the compressed ones. Therefore, dislocation density should be reduced in order to minimize the resistance to oxygen vacancy diffusion at low temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Facile fabrication of 2D material multilayers and vdW heterostructures with multimodal microscopy and AFM characterization

Reliable transfer processes that enable manipulation of two-dimensional (2D) materials, e.g., transition metal dichalcogenides (TMDCs) and MXenes, from one substrate to another has been a necessity for successful device fabrication. Here, with both mechanical exfoliation and chemical vapor deposition (CVD) widely used, a versatile, clean, deterministic, and yet simple transfer technique is highly needed. To address such need, we developed a transfer method that takes advantage of wettability contrast between interfaces without the use of sacrificial layers or chemical processes. More importantly, a setup was developed to carry out this transfer method with high sample selectivity and fine control of the position and orientation of transferred TMDC crystals, a feature required for fabrication of the devices based on vertical 2D heterostructures. Using both exfoliated and CVD grown materials and subsequent atomic force microscopy (AFM), photoluminescence (PL), confocal Raman and tip enhanced Raman spectroscopy (TERS) characterization, we ascertained the quality of interfaces resulting from the transfer process while preserving excellent 2D material integrity. PL and TERS maps revealed nanometer-scale heterogeneities in the interfaces of fabricated heterostructures, which should enable further perfection of the transfer technique. TERS/TEPL information were employed to identify areas suitable for nanodevice fabrication, making the reported transfer and characterization methods ideal for making high quality assembly of 2D heterostructure more accessible, which should facilitate exploration of vertical 2D heterostructures for applications in electronics, batteries, solar cells, and twistronics.

2D material transfer↗
DOE OSTI2017

On the kinetics of transgranular particle embrittlement during simulated carburizing in steel containing grain-refining additions of aluminum and niobium plus aluminum

Here, the kinetics of toughness degradation resulting from transgranular particle embrittlement are evaluated as a function of composition and processing history for simulated carburizing operations in air-melt steel containing grain-refining additions of aluminum and aluminum plus niobium. The kinetics of particle embrittlement are inherently linked to the ripening of AlN precipitates after extended austenitization in steel containing carbon contents representative of both the case and core of a carburized component. Embrittlement in steel containing AlN occurs with an activation energy similar to the value for aluminum diffusion in austenite, although an AlN volume fraction effect on the embrittlement kinetics is manifested as decreases in activation energy with decreases in the [Al]/[N] ratio of steel. In contrast, the presence of niobium substantially retards the kinetics of particle embrittlement in steel containing 120–200 ppm N. Observations of AlN precipitates coated with Nb(C,N) indicate that the decreases in embrittlement kinetics are related to a reduction in the potential for AlN ripening during austenitization.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Strain-rate dependent deformation mechanisms in single-layered Cu, Mo, and multilayer Cu/Mo thin films

Here, strain-rate sensitivity and rate-dependent hardness, over a range of 10 -2 to 10 2 s -1 , of sputter-deposited single-layered Cu, Mo, and 5 nm Cu/ 5 nm Mo, and 100 nm Cu/ 100 nm Mo multilayer films with a total film thickness of 5 μm were measured using nanoindentation. The plastic zone underneath the nanoindents was characterized via cross-sectional transmission electron microscopy (XTEM). The multilayer films exhibited enhanced hardness but slightly reduced strain-rate sensitivity with decreasing layer thickness from 100 nm to 5 nm. Only the 5 nm Cu/ 5 nm Mo multilayer film exhibited shear bands underneath the nanoindents, and the size of the shear bands increased with increasing strain rate. In contrast, the 100 nm Cu/ 100 nm Mo multilayer film exhibited material pile-up around the indents and significant nanotwinning within Cu grains. The effect of strain rate and layer thickness on the hardness and strain rate sensitivity of the multilayer thin films is interpreted using a modified confined layer slip (CLS) model. The reduced rate sensitivity at 5 nm as compared to 100 nm correlates with abundant growth nanotwins in the Cu grains in 100 nm and formation of shear bands in 5 nm multilayers. In single layer films, a substructure with a high density of dislocations was observed consistent with the plastic strain gradient in the indent plastic zone. No evidence of deformation twins was noted in any of the samples.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Study of growth twins produced through heat treatment of fine-grained magnesium

This study investigated the microstructural features of magnesium after the fine-grained magnesium sample was heat treated at 400 °C for 2 h. Both fine-grained and heat-treated magnesium samples were observed using the electron backscatter diffraction technique in scanning electron microscopy. The results show that the grains were substantially coarsened, the local strain and the local misorientation was significantly reduced, and a large number of twins were observed in the heat-treated magnesium sample. The misorientation angle analysis determined that the twins were oriented about 86.3° away from the orientation of their corresponding matrices, and the twins were the variants of $\{1 0 \bar{1} 2\}$ tensile twins. The relative orientation analysis also identified that the fast growth directions of the twins were closely along the $<2 \bar{1} \bar{1} 0>$ or $<1 0 \bar{1} 0>$ directions in the basal plane. The twins can merge or impinge onto each other. Most boundaries between the twins have the misorientation angle of about 7.4°.

36 MATERIALS SCIENCE↗