Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “level set methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Problems Found Using a Radon Stripping Algorithm for Retrospective Assessment of Air Filter Samples

An evaluation of a large number of air sample filters was undertaken using a commercial alpha and beta spectroscopy system employing a passive implanted planar silicon (PIPS) detector. Samples were only measured after air flow through the filters had ceased. Use of a commercial radon stripping algorithm was implemented to discriminate anthropogenic alpha activity on the filters from the radon progeny. When uncontaminated air filters were evaluated, the results showed that there was a time-dependent bias in both average estimates and measurement dispersion of anthropogenic activity estimates with the relative bias being small compared to the dispersion, indicating that the system would not give false positive indications for an appropriately set decision level. By also measuring environmental air sample filters simultaneously with electroplated alpha filters, use of the radon stripping algorithm demonstrated a number of substantial unexpected deviations from calibrated values indicating that the system would give false negative indications. Use of the current algorithm is, therefore, not recommended for general assay applications. Use of the PIPS detector should only be utilized for gross counting without appropriate modifications to the curve-fitting algorithm. As a screening method, the radon stripping algorithm might be expected to see elevated alpha activities on air sample filters (not due to radon progeny) around the 200 disintegrations per minute level.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Integrated Metrics for County-Level Resilience Ranking Using Entropy and TOPSIS

In the face of atypical weather events, power infrastructure failures, and limited resources for resilience investment, energy decision-makers need data-driven metrics to allocate resilience investments and maximize the reduction of power outage impacts. For state-level planning, for instance, ranking the resilience of each county is key to ensuring effective distribution of resources. In such cases, resilience for each spatial unit is multifaceted and is captured by a set of indicators (i.e., metrics) that can be combined into an overall score that reduces the complexity of power outage dynamics to a single decision metric. However, weighting of these indicators is often addressed by simplifying assumptions (i.e., equal weights) or semi-subjective methods that rely on user-defined weights that can introduce biases (e.g., weighted average score). Within the disaster risk reduction and resilience engineering community, a recurring challenge in multicriteria decision-making is the objective weighting of indicators for composite indices. To address this issue, we have leveraged a Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) combined with an entropy-based weighting approach to calculated the integrated scores. This method objectively determines the importance of each metric, better discerns between spatial units (i.e., counties), and offers a more reliable ranking of counties according to their relative resilience attributes. By improving methods for integrating resilience indicators, our approach helps planners and decision-makers prioritize resources more effectively for more efficient resilience investments.

Bhusal, Narayan [Oak Ridge National Laboratory (OR↗

Searches for a sterile-neutrino admixture in detecting tritium decays in a proportional counter: New possibilities

An experiment aimed at searches for an admixture of a sterile neutrino whosemass is 1 to 8 keV via detecting electrons from tritium decay in a proportional counter is proposed. The admixture in question can be discovered by a specific distortion of the energy spectrum of these electrons. For the above masses, the distortion extends over the whole spectrum; therefore, use can bemade of detectors that have a relatively low energy resolution (about 10 to 15%). A classic proportional counter is a simple and natural choice of detector for the decays of a gaseous tritium. The approach that we propose is novel in two respects. On one hand, the proportional counter used is made as a discrete unit in the form of a fully fused quartz tube. This permits a readout of current signals directly from the anode filament and ensures a high stability in the case of long-term measurements. At the same time, the application of state-of-the-art digital data-acquisition methods will make it possible to perform measurements under conditions of high counting rates—up to 10{sup 6} Hz. As a result, the energy spectrum of electrons from tritium decays that is formed by 10{sup 12} counts could be accumulated within about a month. This data sample would make it possible to set an upper limit in the range of 10{sup −3}–10{sup −5} on a sterile-neutrino admixture at a confidence level of three standard deviations (3σ) for m{sub s} in the range of 1–8 keV, this being one to two orders of magnitude more stringent than present-day limits.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Biosafety Level 3 Recon Training

The Biosafety Level 3 Recon training is a 3D virtual tool developed for the Counter WMD Analysis Cell (CWAC) and the Asymmetric Warfare Group (AWG) by the Application Modeling and Development Team within the NEN-3 International Threat Reduction Group. The training simulates a situation where friendly forces have secured from hostile forces a suspected bioweapons development laboratory. The trainee is a squad member tasked to investigate the facility, locate laboratories within the facility, and identify hazards to entrants and the surrounding area. Before beginning the 3D simulation, the trainee must select the appropriate MOPP level for entering the facility. The items in the simulation, including inside and outside the bioweapon facility, are items that are commonly used by scientists in Biosafety Level (BSL) laboratories. Each item has clickable red tags that, when activated, give the trainee a brief description of the item and a controllable turn-around view. The descriptions also contain information about potential hazards the item can present. Trainees must find all tagged items in order to complete the simulation, but can also reference descriptions and turn-around view of the items in a glossary menu. Training is intended to familiarize individuals whom have little or no biology or chemistry background with technical equipment used in BSL laboratories. The revised edition of this simulation (Biosafety Level 3 Virtual Lab) changes the trainee into a investigator instead of a military combatant. Many doors now require a virtual badge swipe to open. Airlock doors may come in sets such that the open door must be closed before the next door in the set can be opened. A user interface was added so that the instructor can edit the information about the items (the brief descriptions mentioned above) using the simulation software instead of the previous method of manually entering the material in xml settings files. Facility labels, such as "No Parking" and "Men's room", were changed from Korean, into English. No other changes were made.

59 BASIC BIOLOGICAL SCIENCES↗

Rays for Roots - Integrating Backscatter X-Ray Phenotyping, Modeling and Genetics to Increase Carbon Sequestration and Switchgrass Resource Use (Final Report)

To increase carbon (C) deposition in the soil and enhance crop resource use efficiency, characterizing root form and function is essential. Several root and soil traits have been linked to increased root-to-soil C transfer. Technology that could provide high-resolution characterization of many of these traits in field conditions would revolutionize our ability to study and understand how to increase C sequestration. In this effort, we developed an initial early prototype backscatter X-ray system for non-destructive imaging of root traits. We collected initial backscatter X-ray data in field and lab settings and carried out early analysis of these data. Along with this prototype, we also developed a suite of root phenotyping approaches including advanced minirhizotron image analysis, soil core imaging, and mesocosm imaging. Minirhizotron (MR) tubes are clear tubes inserted into the soil in the field and used to image roots and the surrounding soil. Our team has developed deep learning-based methods that can segment roots from soil that can learn from imprecise image-level labels. The ability to learn or fine-tune our deep learning algorithms from image-level labels allows easier and faster application of these approaches to new locations and new plant species. We have successfully implemented and applied our MR analysis approaches to thousands of switchgrass MR images collected across geographical regions. An advantage of MR imaging is the ability to collect root and soil images over time. Our soil core analysis included collecting hundreds of soil core samples from harvested switchgrass fields and imaging these cores with both X-ray CT and backscatter X-ray imaging. Initial segmentation approaches for the X-ray CT images of these cores have been developed and applied. An advantage of soil core analysis is that it preserves the three-dimensional structures of the roots and soil in the core collected. Our group also developed photogrammetry-based mesocosm root imaging and phenotyping approaches. In this approach, a plant was grown in a large mesocosm with a three-dimensional grid of thin supporting lines inserted throughout the mesocosm. After the plant (and, correspondingly, the root architecture is grown and established) the soil media was removed and the supporting lines approximately preserved the three-dimensional root architecture. Then, we applied photogrammetry techniques to create a three-dimensional digital representation of the root architecture for which we developed analysis algorithms including skeletonization. We carried out our phenotyping development with powerful switchgrass resources and physiological and agroecosystem modeling to deliver novel technology. This project contributes to multiple ARPA-E missions including reduction of foreign imports of energy, reduction of energy-related emissions including greenhouse gases, and ensuring that the United States maintains a technological lead in developing and deploying advanced energy technology. Furthermore, the developed tools could transform public and private plant breeding and could be broadly applicable to other crops and, potentially, other application areas. Our team of engineers, plant and soil scientists, and modelers i) developed an early prototype backscatter X-ray platform that can operate in field conditions; ii) developed a suite of root phenotyping and characterization approaches as described above; iii) developed and carried out plant biology and physiology roots studies and; iv) developed and implemented mechanistic physiological modeling.

42 ENGINEERING↗

Strategy to Develop a Control Scheme for Core Thermal Performance Optimization

This report outlines a three-year research plan for optimizing reactor core thermal performance through use of a Digital Twin (DT) model and a set of neutron detectors to correspondingly adapt the reactor control strategy. It identifies reactor features and achievable neutron measurements that factor into this optimization task. It considers spatial effects that are important and how they can be managed by a real-time algorithm that controls reactivity actuators. The report presents a set of tasks, along with corresponding methods, for accomplishing this objective. The final task in this set is to validate the combined optimization procedure in the Purdue University’s PUR-1 reactor, for which we have an agreement of understanding. Additionally, we describe an alternative approach for overcoming some of the limitations inherent in the above approach, which includes the computational costs of high-fidelity simulations and achievable integration of neutron measurements into the DT. The proposed algorithms lower the technology readiness level (TRL) of the overall approach as some additional analysis and the development of a new neutron detector concept are necessary. In particular, a sensor measuring the gradient of the neutron flux is required, and the prototype is expected to be validated in the PUR-1 reactor. The potential benefits and the opportunity to significantly push forward the state-of-the-art make this approach worthy of further exploration in the upcoming years.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Calibration of Traceable Solid Mock 131 I Phantoms Used in an International SPECT Image Quantification Comparison

The International Atomic Energy Agency (IAEA) has organized an international comparison to assess Single Photon Emission Computed Tomography (SPECT) image quantification capabilities in 12 countries. Iodine-131 was chosen as the radionuclide for the comparison because of its wide use around the world, but for logistical reasons solid 133 Ba sources were used as a long-lived surrogate for 131 I. For this study, we designed a set of solid cylindrical sources so that each site could have a set of phantoms (having nominal volumes of 2 mL, 4 mL, 6 mL, and 23 mL) with traceable activity calibrations so that the results could be properly compared. We also developed a technique using two different detection methods for individually calibrating the sources for 133 Ba activity based on a National standard. This methodology allows for the activity calibration of each 133 Ba source with a standard uncertainty on the activity of 1.4 % for the high-level 2-, 4-, and 6-mL sources and 1.7 % for the lower-level 23 mL cylinders. This level of uncertainty allows for these sources to be used for the intended comparison exercise, as well as in other SPECT image quantification studies.

47 OTHER INSTRUMENTATION↗

The Current State of Radiation Dosimetry in Radionuclide Therapy

Radionuclide therapy combines the specificity of cancer cell targeting with the well-known cytotoxic effects of ionizing radiation. It has the potential to simultaneously eradicate both the primary tumor site as well as the metastatic extent of the disease throughout the body. Despite these advantages, a major limitation of radionuclide therapy is that conventional internal dosimetry methods have failed to accurately predict treatment outcomes in patients. It has been proposed that this shortcoming is due to the fact that therapeutic dosimetry is typically performed using methods developed for diagnostic imaging that do not consider patient specific anatomy, pharmacokinetics and dose heterogeneity. Even worse, dosimetry methods are often completely neglected during treatment planning and dose prescription is based on Body Surface Area/Weight (BSA/BW) and platelet counts. The most widely used internal dosimetry software is OLINDA/EXM (Organ Level Internal Dose Assessment for Exponential Modeling). OLINDA/EXM calculates absorbed doses using the formulism developed by the Medical Internal Radiation Dose (MIRD) committee of the Society of Nuclear Medicine. In its current implementation, OLINDA/EXM requires the use of S factors, which are derived in phantoms that do not accurately represent the actual patient. In addition, OLINDA/EXM assumes that the activity distribution in each organ and tumor is uniform, when it has been well established that activity distributions are often highly heterogeneous. Furthermore, the tumor is not modeled in the phantom, which introduces additional uncertainties in the calculation. Due to these limitations, there is a clear need for improved dosimetry methods for therapeutic nuclear medicine that utilize patient-specific imaging information. A variety of efforts are currently underway to develop such methods. There are two commercial software packages on the market for voxel level internal dosimetry: STRATOS (Philips Technologies, Aachen, Germany) and VoxelDose (DosiSoft, Cachan, France), but both packages are not widely used in clinical practice. In addition, several academic platforms have been developed. Similar to these offerings, RAPID is a robust, fast and multimodal platform. However, RAPID has been designed with tremendous flexibility to perform accurate dosimetry for any radiopharmaceutical in the pre-clinical and clinical setting in order to aid in drug development and to assist in radionuclide therapy treatment planning. This presentation will overview existing dosimetry platforms while focusing on the Monte Carlo-based platform developed at the University of Wisconsin known as RAPID (Radiopharmaceutical Assessment Platform for Internal Dosimetry). RAPID is a robust and universal platform that can provide accurate 3D internal dosimetry for any radiopharmaceutical during both the pre-clinical and clinical stages of drug development as well as clinical treatment planning in TRT. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

Authentication Protocol for ICS without Encryption

Industrial control systems (ICS) describes the different types of control systems and associated instrumentation, which includes the devices, systems, networks, and controls used to operate and/or automate industrial processes. Depending on the industry, each ICS functions differently and are built to electronically manage tasks efficiently. Historically, industrial plants have included networking, and changes have been made over time without consideration for security. Many ICS devices currently have inadequate security features. Adding encryption in ICS is undesirable because many of the new detection method involves deep packet inspection. Therefore, we propose to develop a method of providing authentication between devices without encrypting the data. This testbed design will allow rapid development and experimentation with Cyber Physical Systems. Modbus connects to a supervisory computer with a Remote Terminal Unit (RTU) in Supervisory Control and Data Acquisition (SCADA) systems. Our project seeks to enhance security in the ICS environment by adding device authentication to the lower levels of the plant floor. This approach was selected as it allows verification of the sender of data from level 1/level 0 devices up to supervisory systems. This addition is desirable as it adds enhanced verification to the integrity of system data without obscuring (via encryption) the data being transmitted across the network. This is important because many ICS systems are real time critical (decryption adds to latency) and many other good security options require deep packet inspection (which encryption completely defeats). To accomplish this, a proof of concept of adding an authentication scheme was designed and will be tested with a common ICS protocol. The setup includes a single serial cable connecting the serial ports on two devices, a Master and a Minion. Authentication will occur in the following methods: - Data layer involving Transport Layer Security/Secure Socket Layer (TLS/SSL); - TCP/IP route implementation; - Key exchange algorithm; - Raspberry Pi programming for authentication. A portion of the setup includes adding Raspberry Pi into the system as the device is handling the authentication for the network traffic. Modbus is the chosen ICS protocol. It is used to transmit signals from instrumentation and control devices back to a main controller or data gathering system. Typically, the device identity is assumed but not verified. For verifying device identity, we constructed a digital signature architecture with TLS. A novel adaptation of this is to use only the digital signature that is provided and not the encryption capability. This allows ICS traffic to flow unobscured while still providing verification for the integrity of the data. Verification of this process will involve adding additional I/O level network devices with spoofed IP addresses and detecting the authenticated versus unauthenticated traffic. Our TLS implementation will have encryption disabled but should still allow for digital signing of data. This will enable our system to distinguish between real end devices and spoofed end devices. This experiment is presently building the test setup. It is focusing on a small setting to identify authenticated and unauthenticated devices on the network. This should allow for scaling to a larger network size after the initial proof of concept. One concern with this scheme is a certificate deployment has a large scale key management. Network size will thus increase the key management task for security. In addition, we believe that further research should be done on exploring the use of this method to defeat man-in-the-middle attacks.

42 ENGINEERING↗

Numerical schemes for dynamically orthogonal equations of stochastic fluid and ocean flows

The quantification of uncertainties is critical when systems are nonlinear and have uncertain terms in their governing equations or are constrained by limited knowledge of initial and boundary conditions. Such situations are common in multiscale, intermittent and non-homogeneous fluid and ocean flows. The dynamically orthogonal (DO) field equations provide an adaptive methodology to predict the probability density functions of such flows. The present work derives efficient computational schemes for the DO methodology applied to unsteady stochastic Navier-Stokes and Boussinesq equations, and illustrates and studies the numerical aspects of these schemes. Semi-implicit projection methods are developed for the mean and for the DO modes, and time-marching schemes of first to fourth order are used for the stochastic coefficients. Conservative second-order finite-volumes are employed in physical space with new advection schemes based on total variation diminishing methods. Other results include: (i) the definition of pseudo-stochastic pressures to obtain a number of pressure equations that is linear in the subspace size instead of quadratic; (ii) symmetric advection schemes for the stochastic velocities; (iii) the use of generalized inversion to deal with singular subspace covariances or deterministic modes; and (iv) schemes to maintain orthonormal modes at the numerical level. To verify our implementation and study the properties of our schemes and their variations, a set of stochastic flow benchmarks are defined including asymmetric Dirac and symmetric lock-exchange flows, lid-driven cavity flows, and flows past objects in a confined channel. Different Reynolds number and Grashof number regimes are employed to illustrate robustness. Optimal convergence under both time and space refinements is shown as well as the convergence of the probability density functions with the number of stochastic realizations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Leveraging visible and near-infrared spectroelectrochemistry to calibrate a robust model for Vanadium(IV/V) in varying nitric acid and temperature levels

Spectroelectrochemistry and optimal design of experiments can be used to rapidly build accurate models for species quantification and enable a greater level of process awareness. Optical spectroscopy can provide vital elemental and molecular information, but several hurdles must be overcome before it can become a widely adopted analytical method for remote analysis in the nuclear field. Analytes with varying oxidation state, acid concentration, and fluctuating temperature must be efficiently accounted for to minimize time and resources in restrictive hot cell environments. The classic one-factor-at-a-time approach is not suitable for frequent calibration/maintenance operations in this setting. Therefore, a novel alternative was developed to characterize a system containing vanadium(IV/V) (0.01–0.1 M), nitric acid (0.1–4 M), and varying temperatures (20–45 °C). Here, spectroelectrochemistry methods were used to acquire a sample set selected by optimal design of experiments. This new approach allows for the accurate analysis of vanadium and HNO 3 concentration by leveraging UV–Vis–NIR absorption spectroscopy with robust and accurate chemometric models. The top model's root mean squared error of prediction percent values were 3.47%, 4.06%, 3.40%, and 10.9% for V(IV), V(V), HNO 3 , and temperature, respectively. These models, efficiently developed using the designed approach, exhibited strong predictive accuracy for vanadium and acid with varying oxidation states and temperature using only spectrophotometry, which advances current technology for real-world hot cell applications. Additionally, Nernstian analysis of the V(IV/V) standard potential was performed using traditional absorbance methods and multivariate curve resolution (MCR). The successful tests demonstrated that MCR Nernst tests may be valuable in highly convoluted spectral systems to better understand the redox processes' behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Complex absorbing potentials within EOM-CC family of methods: Theory, implementation, and benchmarks

A production-level implementation of equation-of-motion coupled-cluster singles and doubles (EOM-CCSD) for electron attachment and excitation energies augmented by a complex absorbing potential (CAP) is presented. The new method enables the treatment of metastable states within the EOM-CC formalism in a similar manner as bound states. The numeric performance of the method and the sensitivity of resonance positions and lifetimes to the CAP parameters and the choice of one-electron basis set are investigated. A protocol for studying molecular shape resonances based on the use of standard basis sets and a universal criterion for choosing the CAP parameters are presented. Our results for a variety of π{sup *} shape resonances of small to medium-size molecules demonstrate that CAP-augmented EOM-CCSD is competitive relative to other theoretical approaches for the treatment of resonances and is often able to reproduce experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cheaper and more noise-resilient quantum state preparation using eigenvector continuation

Subspace methods are powerful, noise-resilient methods that can effectively prepare ground states on quantum computers. The challenge is to get a subspace with a small condition number that spans the states of interest using minimal quantum resources. In this work, we will use eigenvector continuation to build a subspace from the low-lying states of a set of Hamiltonians. The basis vectors are prepared using truncated versions of standard state preparation methods such as imaginary-time evolution (ITE), adiabatic state preparation (ASP), and variational quantum eigensolver. By using these truncated methods combined with eigenvector continuation, we can directly improve upon them, obtaining more accurate ground-state energies at a reduced cost. We use several spin systems to demonstrate convergence even when methods like ITE and ASP fail, such as ASP in the presence of level crossings and ITE with vanishing energy gaps. We also showcase the noise resilience of this approach beyond the gains already made by having shallower quantum circuits. Furthermore, our findings suggest that eigenvector continuation can be used to improve existing state preparation methods in the near term.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Observational tests of a two parameter power-law class modified gravity in Palatini formalism

CONTEXT: In this work we propose a modified gravity action f(R)=(R{sup n}-R{sub 0}{sup n}){sup 1/n} with two free parameters of n and R{sub 0} and derive the dynamics of a universe for this action in the Palatini formalism. AIM: We do a cosmological comparison of this model with observed data to find the best parameters of a model in a flat universe. METHOD: To constrain the free parameters of model we use SNIa type Ia data in two sets of gold and union samples, CMB-shift parameter, baryon acoustic oscillation, gas mass fraction in cluster of galaxies, and large-scale structure data. RESULT: The best fit from the observational data results in the parameters of model in the range of n=0.98{sub -0.08}{sup +0.08} and {omega}{sub M}=0.25{sub +0.1}{sup -0.1} with one sigma level of confidence where a standard {lambda}CDM universe resides in this range of solution.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

How Accurate Are Simulations and Experiments for the Lattice Energies of Molecular Crystals?

Molecular crystals play a central role in a wide range of scientific fields, including pharmaceuticals and organic semiconductor devices. However, they are challenging systems to model accurately with computational approaches because of a delicate interplay of intermolecular interactions such as hydrogen bonding and Van der Waals dispersion forces. Here, by exploiting recent algorithmic developments, we report the first set of diffusion Monte Carlo lattice energies for all 23 molecular crystals in the popular and widely used X23 dataset. Comparisons with previous state-of-the-art lattice energy predictions (on a subset of the dataset) and a careful analysis of experimental sublimation enthalpies reveals that high-accuracy computational methods are now at least as reliable as (computationally derived) experiments for the lattice energies of molecular crystals. Overall, this work demonstrates the feasibility of high-level explicitly correlated electronic structure methods for broad benchmarking studies in complex condensed phase systems, and signposts a route towards closer agreement between experiment and simulation. Published by the American Physical Society 2024

Physics↗

Patient radiation dose audits for fluoroscopically guided interventional procedures

Purpose: Quality management for any use of medical x-ray imaging should include monitoring of radiation dose. Fluoroscopically guided interventional (FGI) procedures are inherently clinically variable and have the potential for inducing deterministic injuries in patients. The use of a conventional diagnostic reference level is not appropriate for FGI procedures. A similar but more detailed quality process for management of radiation dose in FGI procedures is described. Methods: A method that takes into account both the inherent variability of FGI procedures and the risk of deterministic injuries from these procedures is suggested. The substantial radiation dose level (SRDL) is an absolute action level (with regard to patient follow-up) below which skin injury is highly unlikely and above which skin injury is possible. The quality process for FGI procedures collects data from all instances of a given procedure from a number of facilities into an advisory data set (ADS). An individual facility collects a facility data set (FDS) comprised of all instances of the same procedure at that facility. The individual FDS is then compared to the multifacility ADS with regard to the overall shape of the dose distributions and the percent of instances in both the ADS and the FDS that exceed the SRDL. Results: Samples of an ADS and FDS for percutaneous coronary intervention, using the dose metric of reference air kerma (K{sub a,r}) (i.e., the cumulative air kerma at the reference point), are used to illustrate the proposed quality process for FGI procedures. Investigation is warranted whenever the FDS is noticeably different from the ADS for the specific FGI procedure and particularly in two circumstances: (1) When the facility's local median K{sub a,r} exceeds the 75th percentile of the ADS and (2) when the percent of instances where K{sub a,r} exceeds the facility-selected SRDL is greater for the FDS than for the ADS. Conclusions: Analysis of the two data sets (ADS and FDS) and of the percent of instances that exceed the SRDL provides a means for the facility to better manage radiation dose (and therefore both deterministic and stochastic radiation risk) to the patient during FGI procedures.

60 APPLIED LIFE SCIENCES↗

Using High-Resolution NSRDB Data to Evaluate Cloud Mask Forecast from WRF-Solar EPS

Validating spatiotemporal distributions of cloud forecasts using numerical weather prediction (NWP) models is difficult as this requires high-quality cloud-property at significantly high spatial and temporal resolution over extended periods of time. Observations of cloud properties, such as cloud mask, cloud optical thickness, and cloud type, are vital for assessing the capability of NWP models to forecast various types of clouds. Using the National Solar Radiation Database (NSRDB), this research evaluates ensemble cloud-mask predictions from the WRF-Solar ensemble prediction system (WRF-Solar EPS). From the WRF-Solar EPS, day-ahead solar forecasts for the contiguous United States (CONUS) for 2018 are simulated. Given the NSRDB data is accessible at a resolution of 2 km, we can calculate the cloud fraction across the 9-km grid of WRF-Solar EPS. This allows us to spatially assess the cloud-mask forecasts using two methods against the high-resolution NSRDB: (a) considering all 2-km NSRDB clouds in the forecast domain (EMAll), and (b) using a minimum cloud fraction threshold of 50% to designate a pixel as cloudy (EMP50). The low-resolution cloud masks from WRF-Solar EPS are evaluated directly against the cloud-resolving scale gridded observations from NSRDB using EMAll. With EMP50, we presume that scenes with less than 50% cloud cover from the 2-km NSRDB are clear. Thus, this assessment approach allows for a fair comparison with WRF-Solar EPS resolved to a 9-km grid. A method of point-by-point verification is used to evaluate dichotomous (yes/no) cloud mask predictions against the NSRDB. For each pixel of model extent, cloud frequency and traditional metrics (e.g., probability of detection, false alarm rate, and hit rate, etc.) are computed and compared with satellite-derived data sets. Mismatched cloud frequency (MCF) is computed to measure the present capability of WRF-Solar EPS in representing various types of clouds, which are categorized using three levels of cloud top height (CTH) and cloud optical depth (COD) across entire CONUS. Preliminary results show that the WRF-Solar EPS provides MCF values ranging from 9% to 46%, 16% to 33%, and 8% to 27% for low-level, middle-level, and high-level clouds, respectively, for three CTHs. The model produces MCFs ranging from 27% to 46%, 13% to 34%, and 8% to 19% for thin, medium-thickness, and thick clouds, respectively, for three CODs. The presentation will include a detailed description of the current outcomes as well as potential future extensions. The evaluation approach established in this study is readily extensible to the evaluation of cloud predictions from different ensemble NWP models. In addition, the findings of the suggested evaluation technique aid in identifying model weaknesses and will ultimately lead to advances in WRF-Solar EPS's skill in predicting clouds and solar irradiance.

cloud mask forecast↗

Considerations on the Use of Custom Accelerators for Big Data Analytics

Accelerators, including Graphic Processing Units (GPUs) for gen- eral purpose computation, many-core designs with wide vector units (e.g., Intel Phi), have become a common component of many high performance clusters. The appearance of more stable and reliable tools tools that can automatically convert code written in high-level specifications with annotations (such as C or C++) to hardware de- scription languages (High-Level Synthesis - HLS), is also setting the stage for a broader use of reconfigurable devices (e.g., Field Pro- grammable Gate Arrays - FPGAs) in high performance system for the implementation of custom accelerators, helped by the fact that new processors include advanced cache-coherent interconnects for these components. In this chapter, we briefly survey the status of the use of accelerators in high performance systems targeted at big data analytics applications. We argue that, although the progress in the use of accelerators for this class of applications has been sig- nificant, differently from scientific simulations there still are gaps to close. This is particularly true for the ”irregular” behaviors exhibited by no-SQL, graph databases. We focus our attention on the limits of HLS tools for data analytics and graph methods, and discuss a new architectural template that better fits the requirement of this class of applications. We validate the new architectural templates by mod- ifying the Graph Engine for Multithreaded System (GEMS) frame- work to support accelerators generated with such a methodology, and testing with queries coming from the Lehigh University Benchmark (LUBM). The architectural template enables better supporting the task and memory level parallelism present in graph methods by sup- porting a new control model and a enhanced memory interface. We show that out solution allows generating parallel accelerators, pro- viding speed ups with respect to conventional HLS flows. We finally draw conclusions and present a perspective on the use of reconfig- urable devices and Design Automation tools for data analytics.

Data Analytics↗