SEARCH · Engineering Papers

Results for “flow instability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Viscously driven plasma flows in the deep geomagnetic tail

An analysis, based on the principles of stress balance in a 1-dimensional current sheet is presented, which considers the problem of closed magnetic flux transport into the deep tail by a 'viscous'-like interaction between the solar wind and the magnetosphere. The analysis is illustrated with an example of ISEE-3 data showing strong tailward plasma sheet flows on apparently closed field lines in the deep tail. Apart from narrow regions adjacent to the magnetopause, these flows are not driven by the scattering of magnetosheath plasma into the magnetosphere. The fraction of the magnetosheath momentum flux needed to be anomalously transferred into the plasma sheet to drive the flows is estimated. In the example this is 6 percent. No previously suggested mechanism (e.g., the Kelvin-Helmholtz instability) has been shown capable of providing anomalous momentum transport of this magnitude. The current understanding of the 'viscous' interaction between the solar wind and magnetosphere is thus insufficient to explain these observations.

Owen, C. J.↗

NASA NTRS1991

Methods for direct simulation of transition in hypersonic boundary layers

An implicit numerical algorithm for the time accurate solution of the compressible Navier-Stokes equations is described. Results for steady flow past a finite flat plate are presented, together with preliminary results for the temporal simulation of second mode instability in a flat plate boundary layer at Mach 4.5.

Vandervegt, J. J. W.↗

NASA NTRS2002

Combustion Sensors: Gas Turbine Applications

This report documents efforts to survey the current research directions in sensor technology for gas turbine systems. The work is driven by the current and future requirements on system performance and optimization. Accurate real time measurements of velocities, pressure, temperatures, and species concentrations will be required for objectives such as combustion instability attenuation, pollutant reduction, engine health management, exhaust profile control via active control, etc. Changing combustor conditions - engine aging, flow path slagging, or rapid maneuvering - will require adaptive responses; the effectiveness of such will be only as good as the dynamic information available for processing. All of these issues point toward the importance of continued sensor development. For adequate control of the combustion process, sensor data must include information about the above mentioned quantities along with equivalence ratios and radical concentrations, and also include both temporal and spatial velocity resolution. Ultimately these devices must transfer from the laboratory to field installations, and thus must become low weight and cost, reliable and maintainable. A primary conclusion from this study is that the optics-based sensor science will be the primary diagnostic in future gas turbine technologies.

Human, Mel↗

NASA NTRS1960

Use of Subsonic Kernel Function in an Influence-Coefficient Method of Aeroelastic Analysis and some Comparisons with Experiment

This paper illustrates the development and application of an influence-coefficient method of analysis for calculating the response of a flexible wing in an airstream to an oscillating disturbing force and for treating such aeroelastic instabilities as flutter and divergence. Aerodynamic coefficients are derived on the basis of lifting - surface theory for subsonic compressible flow by use of the method presented in NASA Technical Report R-48. Application of the analysis is made to a uniform cantilever wing- tip tank configuration for which responses to a sinusoidal disturbing force and flutter speeds were measured over a range of subsonic Mach numbers and densities. Calculated responses and flutter speeds based on flexibility influence coefficients measured at nine stations are in good agreement with experiment, provided the aerodynamic load is distributed over the wing so that local centers of pressure very nearly coincide with these nine influence stations. The use of experimental values of bending and torsional structural damping coefficients in the analysis generally improved the agreement between calculated and experimental responses. Some calculations were made to study the effects on density on responses near the flutter conditions, and linear response trends were obtained over a wide range of densities.

Sewall, John L.↗

NASA NTRS2014

Realistic Modeling of Multi-Scale MHD Dynamics of the Solar Atmosphere

Realistic 3D radiative MHD simulations open new perspectives for understanding the turbulent dynamics of the solar surface, its coupling to the atmosphere, and the physical mechanisms of generation and transport of non-thermal energy. Traditionally, plasma eruptions and wave phenomena in the solar atmosphere are modeled by prescribing artificial driving mechanisms using magnetic or gas pressure forces that might arise from magnetic field emergence or reconnection instabilities. In contrast, our 'ab initio' simulations provide a realistic description of solar dynamics naturally driven by solar energy flow. By simulating the upper convection zone and the solar atmosphere, we can investigate in detail the physical processes of turbulent magnetoconvection, generation and amplification of magnetic fields, excitation of MHD waves, and plasma eruptions. We present recent simulation results of the multi-scale dynamics of quiet-Sun regions, and energetic effects in the atmosphere and compare with observations. For the comparisons we calculate synthetic spectro-polarimetric data to model observational data of SDO, Hinode, and New Solar Telescope.

Realistic Modeling↗

NASA NTRS2016

Electron Jet of Asymmetric Reconnection

We present Magnetospheric Multiscale observations of an electron-scale current sheet and electron outflow jet for asymmetric reconnection with guide field at the subsolar magnetopause. The electron jet observed within the reconnection region has an electron Mach number of 0.35 and is associated with electron agyrotropy. The jet is unstable to an electrostatic instability which generates intense waves with E(sub parallel lines) amplitudes reaching up to 300 mV/m and potentials up to 20% of the electron thermal energy. We see evidence of interaction between the waves and the electron beam, leading to quick thermalization of the beam and stabilization of the instability. The wave phase speed is comparable to the ion thermal speed, suggesting that the instability is of Buneman type, and therefore introduces electron-ion drag and leads to braking of the electron flow. Our observations demonstrate that electrostatic turbulence plays an important role in the electron-scale physics of asymmetric reconnection.

Khotyaintsev, Yu. V.↗

NASA NTRS1972

Hydrodynamic stability of viscoelastic fluids - Importance of fluid model, overstability, and form of disturbance.

A linearized stability analysis has been applied to a fluid flowing in a gravity field between horizontal planes in Couette flow under conditions such that the temperature of the bottom plane exceeds that of the top. It is shown that, under conditions likely to be encountered with polymer solutions, oscillatory instabilities will not be controlling. Criteria are offered for ascertaining when an analysis based upon a second-order fluid model may be expected to yield physically meaningful results. It is also shown that, for the fluid model considered, critical conditions for stability are not changed when disturbances which vary in the flow direction are substituted for those which are a function of the coordinate transverse to the flow.

Mcintire, L. V.↗

NASA NTRS1982

The stability of quasi-geostrophic fields induced by potential vorticity sources

A determination of the conditions leading to instabilities which grow in place in quasi-geostrophic fields induced by localized potential vorticity sources is presented. The analysis considers a quasi-geostrophic barotropic flow in a horizontally open domain, and a nondimensional quasi-geostrophic vorticity equation is defined which governs the deviation stream function. Weak forcing is considered, and it is shown that the field induced by the topography is stable while the field induced by the potential vorticity source can be unstable. The growth rate is exponential and a function of nonlinearity and friction, which, if absent, indicates an unstable flowfield. The instability is shown to be capable of changing the flowfield from one quasi-steady state to another, with energy extraction occurring at the source

Merkine, L.-O.↗

NASA NTRS1980

The radiation of sound by the instability waves of a compressible plane turbulent shear layer

The problem of acoustic radiation generated by instability waves of a compressible plane turbulent shear layer is solved. The solution provided is valid up to the acoustic far-field region. It represents a significant improvement over the solution obtained by classical hydrodynamic-stability theory which is essentially a local solution with the acoustic radiation suppressed. The basic instability-wave solution which is valid in the shear layer and the near-field region is constructed in terms of an asymptotic expansion using the method of multiple scales. This solution accounts for the effects of the slightly divergent mean flow. It is shown that the multiple-scales asymptotic expansion is not uniformly valid far from the shear layer. Continuation of this solution into the entire upper half-plane is described. The extended solution enables the near- and far-field pressure fluctuations associated with the instability wave to be determined. Numerical results show that the directivity pattern of acoustic radiation into the stationary medium peaks at 20 degrees to the axis of the shear layer in the downstream direction for supersonic flows. This agrees qualitatively with the observed noise-directivity patterns of supersonic jets.

Tam, C. K. W.↗

NASA NTRS1986

Interactions of coupled acoustic and vortical instability

In the past, the acoustic combustion instability was studied independently of the hydrodynamic instability induced by vortex motions. This paper is intended to combine the two different sources of energy everywhere within the spatial domain and determine the effect of one upon the other. This can be achieved by calculating the mean flow velocities and vorticities and their fluctuating parts of velocities and vortices, as well as the fluctuating pressure. The Orr-Sommerfeld equation is utilized to determine the wavenumbers and unsteady stream functions from which vortically coupled acoustic instability growth constants are calculated. This process demonstrates that there are two different frequencies, acoustic and hydrodynamic, various combinations of which contribute to either damping or amplification. It is found that stability boundaries for coupled acoustic and vortical oscillations are somewhat similar to the classical hydrodynamic stability boundaries, but they occur in the form of multiple islands.

Chung, T. J.↗

NASA NTRS1929

A Study of Wing Flutter

Part I describes vibration tests, in a wind tunnel, of simple airfoils and of the tail plane of an M0-1 airplane model; it also describes the air flow about this model. From these tests are drawn inferences as to the cause and cure of aerodynamic wing vibrations. Part II derives stability criteria for wing vibrations in pitch and roll, and gives design rules to obviate instability. Part III shows how to design spars to flex equally under a given wing loading and thereby economically minimize the twisting in pitch that permits cumulative flutter. Resonant flutter is not likely to ensue from turbulence of air flow along past wings and tail planes in usual flying conditions. To be flutterproof a wing must be void of reversible autorotation and not have its centroid far aft of its pitching axis, i. e., axis of pitching motion. Danger of flutter is minimized by so proportioning the wing's torsional resisting moment to the air pitching moment at high-speed angles that the torsional flexure is always small. (author)

Zahm, A F↗

NASA NTRSDate not supplied

High-Frequency Secondary Instabilities Downstream of a Forward-Facing Step

Localized high-frequency velocity fluctuations were measured downstream of a forward-facing step on a 30◦swept flat plate with an imposed pressure gradient. Phase-locked time-resolved particle image velocimetry measurements were performed to determine the source of the fluctuations, which ultimately lead to transition. The steps result in localized regions of reversed flow for a short region downstream of the step. These regions are highly localized due to the impact of the stationary crossflow vortices. The velocity fluctuations typically increase significantly in amplitude shortly downstream of reattachment in these localized regions, indicating that the fluctuations are related to reattachment of the shear layer. The phase-averaged measurements confirm that the unsteadiness in the shear layer results in the shedding of a plethora of vortices, some oriented in the streamwise direction, and others in the spanwise direction. These vortices are impacted by the local properties of the mean flow, such as streamwise vorticity and streamwise velocity gradient. The origin of the unsteadiness in the shear layer is not definitively shown, but evidence suggests it is due to a shear-layer instability. Ultimately, the unsteadiness of the shear layer, and the vortices that are shed as a result of this unsteadiness, are responsible for transition in this scenario.

Jenna L Eppink↗

NASA NTRS1990

Computation of instability and transition

The state of transition calculations in 1989 and desirable future trends are analyzed within the framework of aeronautical applications with emphasis on wall-bounded flows. A shift to studies of the early stages of transition, particularly to receptivity, from studies of the late stages in excessively confined periodic domains is proposed. It is pointed out that early-stage studies require a larger computational domain and more difficult boundary conditions but not a very fine grid. Intermediate strategies, more involved than the classical Orr-Sommerfeld equation but much more economical than full Navier-Stokes equations, are emphasized, along with the need for compressible calculations.

Spalart, P. R.↗

NASA NTRS1992

Plans for in-flight measurement of hypersonic crossflow transition on the Pegasus launch vehicle

A flight measurements program is underway to obtain flight data for validating stability theory-based transition estimation techniques for crossflow-induced boundary-layer transition at Mach 6-8. A smooth wing glove, designed to enhance crossflow transition and suppress Tollmien-Schlichting (T-S) instabilities, will be mounted on the delta wing of the first stage of the Pegasus booster. The instrumentation package will include 'intelligent' software capable of yielding space and time-correlations obtained through extensive use of fast Fourier transforms (FFTs), 'windowing' and multistage compression as well as a variety of techniques for quality assurance. The flight experiment covers a Mach number range (6 to 8) where low background disturbance data cannot currently be obtained in ground facilities. These flight results will support transition estimation code development for application to supersonic laminar flow control (LFC) and National Aero-Space Plane (NASP) class vehicles in areas where crossflow, rather than T-S waves, is the dominant instability mode.

Bertelrud, Arild↗

NASA NTRS2014

Novel Epoxy Particulate Composites for Mitigation of Insect Residue Adhesion on Future Aircraft Surfaces

Drag is reduced significantly for airflow over surfaces when laminar flow can be maintained over greater chord lengths, the distance from the leading edge of an airfoil.1 However, surface imperfections, such as chipped paint, scratches, and events that change topography on a microscopic scale can introduce airflow instabilities resulting in premature transition to turbulent flow.1 Although many of these surface imperfections can be avoided with proper maintenance, advanced materials, and advanced manufacturing practices, topographical surface anomalies arising during flight from insect impacts cannot be controlled and can influence laminar flow stability. Practical solutions to this operational challenge need to be developed for future aircraft to have full advantage of laminar flow designs that improve fuel efficiency.2 Researchers have investigated various methods to mitigate insect residue adhesion for decades.3 Although several techniques have demonstrated efficacy including mechanical scrapers, active liquid discharge systems, and sacrificial paper coatings, they have not been commercially implemented due to increased manufacturing and operational complexity, environmental impact, and weight penalties. Coatings offer a simple route for passive insect residue adhesion prevention without many of the challenges associated with maintenance of laminar flow.4 In our previous work, we determined that most commercially available materials were not effective at insect residue adhesion.5 We also identified improvements when both surface energy could be controlled by surface modifying agents and the topography could be altered through the use of micron-sized and nanometer-sized filler materials.6 In this work, these general principles were applied to an epoxy system to evaluate the behavior of the surface modifying agent, a fluorinated alkyl ether oligomer, on surface energy and insect residue adhesion properties.

Wohl, Christopher J.↗

NASA NTRSDate not supplied

Boundary-Layer Transition Prediction Through Loose Coupling of OVERFLOW and LASTRAC

Transition prediction based on linear stability theory is expected to more accurately reflect the causality of transition onset than phenomenological transition models based on RANS-like transport equations. To help achieve the CFD vision 2030 aim of building a CFD tool chain with automated prediction of boundary layer transition, a technique to loosely tie the NASA OVERFLOW CFD solver with the LASTRAC stability analysis tool is described. The coupled solver is then used to compute transition over selected over a flat plate in a freestream with sufficiently low levels of turbulence, NLF(1)-0416 airfoil, the 6:1 prolate spheroid at an angle of attack, and a NASA juncture flow model with symmetric wing configuration. The findings show that the loosely coupled approach can reliably predict the transition location accurately in scenarios that are dominated by a single transition mechanism involving Tollmien-Schlichting instabilities, crossflow instabilities, or separation bubble-induced transition, or include a mixture of selected mechanisms. The toolset presents here appears to be robust to the prescription of the initial transition location, and it can lead to a converged solution in four or five rounds of the mean flow calculation and stability analysis, with minimal input from the user.

boundary layer transition↗

NASA NTRS1984

Structure and Energetics of Medium-scale Atmospheric Waves in the Southern Hemisphere Summer

The NMC analyses were used to study medium-scale waves during three Southern Hemisphere (SH) summers. The SH summer medium-scale waves are observed to exhibit remarkably regular eastward phase progression, and wave maxima can often be traced continuously around the globe. Frequent downstream development of existing wave patterns is observed. The medium-scale waves at times appear to be longitudinally localized features; at other times they resemble truly global-scale models. The time-mean wave structure is found to be consistent with basic-state propagation characteristics and the conservation of wave activity. There is a tendency for background wind structure to restrict wave propagation. From energetics studies it is found that wave-zonal-mean exchange is a valid concept for describing the SH summer circulation, and that the flow vacillated between periods of highly perturbed and zonally symmetric states. The medium-scale waves result from nonlinear baroclinic instabilities, and exhibit a well-defined life cycle of baroclinic growth, maturity, and barotropic decay.

Randel, W. J.↗

NASA NTRS1985

Anti-swirling demonstration

Fluid in bearings and seals, involved in motion due to shaft rotation and generating fluid dynamic forces, represents the well recognized source of instability known as whirl and whip. It is characterized by shaft forward circular precession at subysnchronous frequency. Control of the flow pattern in the bearing/seal clearance may enhance the stability. The rotor system demonstrates the dynamic effect of perturbation of the flow pattern in a seal gap by blowing compressed air in the rotor tangential direction. This effect results in shifting the rotor threshold of stability to a higher value of rotative speed when the air jet direction opposes rotation, and to a lower value of rotative speed when the air jet direction coincides with rotation. This effect implies that an unstable rotor can be stabilized by blowing air in the direction opposite to rotation. This technique is known as anti-swirl.

Muszynska, A.↗