Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “extrapolation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

On protection of Freedom's solar dynamic radiator from the orbital debris environment. I - Preliminary analysis and testing

A great deal of experimentation and analysis was performed to quantify penetration thresholds of components which will experience orbital debris impacts. Penetration was found to depend upon mission specific parameters such as orbital altitude, inclination, and orientation of the component; and upon component specific parameters such as material, density and the geometry particular to its shielding. Experimental results are highly dependent upon shield configuration and cannot be extrapolated with confidence to alternate shield configurations. Also, current experimental capabilities are limited to velocities which only approach the lower limit of predicted orbital debris velocities. Therefore, prediction of the penetrating particle size for a particular component having a complex geometry remains highly uncertain. An approach is described which was developed to assess on-orbit survivability of the solar dynamic radiator due to micrometeoroid and space debris impacts. Preliminary analyses are presented to quantify the solar dynamic radiator survivability, and include the type of particle and particle population expected to defeat the radiator bumpering (i.e., penetrate a fluid flow tube). Results of preliminary hypervelocity impact testing performed on radiator panel samples (in the 6 to 7 km/sec velocity range) are also presented.

Rhatigan, Jennifer L.↗

Measurements of the cosmic microwave background temperature at 1.47 GHz

We have used a radio-frequency-gain total-power radiometer to measure the intensity of the cosmic microwave background (CMB) at a frequency of 1.47 GHz (20.4 cm wavelength) from White Mountain, California in 1988 September and from the South Pole in 1989 December. The CMB thermodynamic temperature, T(CMB), is 2.27 +/- 0.25 K (68 percent confidence limit) measured from White Mountain and 2.26 +/- 0.20 K from the South Pole site. The combined result is 2.26 +/- 0.19 K. The correction for Galactic emission has been derived from scaled low-frequency maps and constitutes the main source of error. The atmospheric signal is extrapolated from our zenith scan measurements at higher frequencies. These results are consistent with our previous measurement at 1.41 GHz and about 2.5 sigma from the 2.74 +/- 0.01 K global average CMB temperature.

Bensadoun, M.↗

Sensor fusion techniques for predicting thunderstorm evolution using lightning and radar networks

A pattern recognition scheme that is used to generate initial seeds or 'first guess' fields for clustering the discrete lightning discharges into storm cells is presented. The clustering process is critically dependent on the prior accuracy of the lightning location estimates. The generation of subsequent storm life-cycle time series (for extrapolation forecasting) also relies on the cluster analysis procedure assigning the correct number of lightning discharges (objects) to the proper storms (groups). The advantages and limitations of different clustering strategies for storm identification and tracking are examined. Storm identification with lightning data alone is compared to storm identification with radar alone, and some synergies for sensor fusion are explored.

Goodman, Steven J.↗

Controlled experiments in cosmological gravitational clustering

A systematic study is conducted of gravitational instability in 3D on the basis of power-law initial spectra with and without spectral cutoff, emphasizing nonlinear effects and measures of nonlinearity; effects due to short and long waves in the initial conditions are separated. The existence of second-general pancakes is confirmed, and it is noted that while these are inhomogeneous, they generate a visually strong signal of filamentarity. An explicit comparison of smoothed initial conditions with smoothed envelope models also reconfirms the need to smooth over a scale larger than any nonlinearity, in order to extrapolate directly by linear theory from Gaussian initial conditions.

Melott, Adrian L.↗

High-resolution X-ray observations of the central region of M31 with the Rosat satellite

A 48,000-sec observation of M31's central 34 arcmin, using the Rosat HRI, has led to the detection of 86 X-ray sources with luminosities above 1.4 x 10 exp 36 ergs/sec; of these, 18 sources are identified with globular clusters and two with SNRs. An extrapolation of the cumulative luminosity distribution to fainter luminosities indicates that only about 15-26 percent of the diffuse X-ray emission in the bulge is attributable to faint unresolved sources from this distribution. The spatial distribution and number density of X-ray sources in M31 appear to be very different from those of our Galaxy.

Primini, F. A.↗

Simultaneous observations of solar plage with the solar extreme ultraviolet rocket telescope and spectrograph (SERTS), the VLA, and the Kitt Peak magnetograph

We obtained simultaneous images of solar plage on 1991, May 7 with SERTS, the VLA,4 and the NASA/National Solar Observatory spectromagnetograph at the NSO/Kitt Peak Vacuum Telescope. Using intensity ratios of Fe XVI to Fe XV emission lines, we find that the coronal plasma temperature is (2.3-2.9) x 10 exp 6 K throughout the region. The column emission measure ranges from 2.5 x 10 exp 27 to l.3 x 10 exp 28 cm exp -5. The calculated structure and intensity of the 20 cm wavelength thermal bremsstrahlung emission from the hot plasma observed by SERTS is quite similar to the observed structure and intensity of the 20 cm microwave emission observed by the VLA. Using the Meyer (1991, 1992) revised coronal iron abundance, we find no evidence either for cool absorbing plasma or for contributions from thermal gyroemission. Using the observed microwave polarization and the SERTS plasma parameters, we calculate a map of the coronal longitudinal magnetic field. The resulting values, about 30-60 G, are comparable to extrapolated values of the potential field at heights of 5000 and 10,000 km.

Brosius, Jeffrey W.↗

Atmospheric sulfur hexafluoride - Sources, sinks and greenhouse warming

An estimate is obtained of worldwide production of SF6, from which a global emission rate is derived and extrapolated for the next 20 years. The atmospheric lifetime of SF6 is then estimated based on a known mechanism (e.g., photolysis and atmospheric oxidation) and/or on the mass balance method. Finally, the radiative forcing of SF6 is calculated based on recent laboratory IR absorption data, and the expected warming over the time period 1950-2010 is computed for several emission scenarios. Calculations showed that SF6 is 3 times more effective as a greenhouse gas compared to CFC 11 on a per-molecule basis. However, based on projected emission scenarios, the expected warming from SF6 through 2010 is small (0.004 C), compared to the warming from CO2 and other trace gases (0.8 C).

Ko, Malcolm K. W.↗

A new flux splitting scheme

A new flux splitting scheme is proposed. The scheme is remarkably simple and yet its accuracy rivals and in some cases surpasses that of Roe's solver in the Euler and Navier-Stokes solutions performed in this study. The scheme is robust and converges as fast as the Roe splitting. An approximately defined cell-face advection Mach number is proposed using values from the two straddling cells via associated characteristic speeds. This interface Mach number is then used to determine the upwind extrapolation for the convective quantities. Accordingly, the name of the scheme is coined as Advection Upstream Splitting Method (AUSM). A new pressure splitting is introduced which is shown to behave successfully, yielding much smoother results than other existing pressure splittings. Of particular interest is the supersonic blunt body problem in which the Roe scheme gives anomalous solutions. The AUSM produces correct solutions without difficulty for a wide range of flow conditions as well as grids.

Liou, Meng-Sing↗

Linear stability of streamwise developing longitudinal vortices

The linear stability of numerical solutions to the quasicylindrical equations of motion for swirling flows is investigated. Initial conditions are derived from Batchelor's similarity solution for a trailing line vortex. The stability calculations are performed using a 2nd-order accurate finitedifference scheme on a staggered grid with the accuracy of the computed eigenvalues enhanced through Richardson extrapolation. The streamwise development of both viscous and inviscid instability modes is discussed for low and high swirl cases. The effect of adverse and favorable pressure gradients on the viscous stability of a longitudinal vortex is also investigated.

Spall, Robert E.↗

Cryogenic propellant thermal control system design considerations, analyses, and concepts applied to a Mars human exploration mission

This paper analyzes, defines, and sizes cryogenic storage thermal control systems that meet the requirements of future NASA Mars human exploration missions. The design issues of this system include the projection of the existing Multilayer Insulation data base for cryogenic storage to much thicker (10 cm or more) insulation systems, the unknown heat leak from mechanical interfaces, and the thermal and structural performance effects of the large tank sizes required for a Mars mission. Acknowledging these unknown effects, heat loss projections are made based on extrapolation of the existing data base. The results indicate that hydrogen, methane, and oxygen are feasible propellants, and that the best suited thermal control sytems are 'thick' MLI, thermodynamic vent sytems, cryocoolers, and vacuum jackets.

Plachta, David W.↗

A measurement of the absolute energy spectra of galactic cosmic rays during the 1976-77 solar minimum

An instrument designed to measure elemental cosmic ray abundances from boron to nickel in the energy region 0.5-2.0 GeV/nucl was flown on a high altitude balloon from Sioux Falls, South Dakota, on 30 September through 1 October 1976 at an average atmospheric depth of about 5 g/sq cm. Differential energy spectra of B, C, N, O, Ne, Mg, Si and Fe, extrapolated to the top of the atmosphere, were measured. The float altitude exposure of 17 h ended near Alpena, Michigan. The flight trajectory maintained a north easterly heading out of Sioux Falls traversing the upper midwest region between 84 and 97 deg west longitude while remaining between 43.5 and 45 deg north latitude. The maximum vertical cut-off for this flight path was 1.77 GV or 0.35 GeV/nucl.

Derrickson, J. H.↗

Calibration of the forward-scattering spectrometer probe - Modeling scattering from a multimode laser beam

Scattering calculations using a detailed model of the multimode laser beam in the forward-scattering spectrometer probe (FSSP) were carried out using a recently developed extension to Mie scattering theory. From this model, new calibration curves for the FSSP were calculated. The difference between the old calibration curves and the new ones is small for droplet diameters less than 10 microns, but the difference increases to approximately 10 percent at diameters of 50 microns. When using glass beads to calibrate the FSSP, calibration errors can be minimized by using glass beads of many different diameters, over the entire range of the FSSP. If the FSSP is calibrated using one-diameter glass beads, then the new formalism is necessary to extrapolate the calibration over the entire range.

Hovenac, Edward A.↗

Thermodynamics of iron-aluminum alloys at 1573 K

The activities of iron (Fe) and aluminum (Al) were measured in Fe-Al alloys at 1573 K using the ion-current-ratio technique in a high-temperature Knudsen cell mass spectrometer. The Fe-Al solutions exhibited negative deviations from ideality over the entire composition range. The activity coefficientsγ Fe, andγ A1 are given by the following equations as a function of mole fraction (x Fe,x Al): 0<χA1<0.4 ln(γ(Fe))=−4.511(±0.008)χ^(2)(A1) ln(γ(A1))=−4.462(±0.029)χ^(2)(Fe) +0.325(±0.013) 0.6<χ(A1)<1.0 ln(γ(Fe))=−4.065(±0.006)χ^(2)(A1)+0.099(±0.003) ln(γ(A1))=−4.092(±0.026)χ^(2)(Fe)+0.002(±0.001) The results showed good agreement with those obtained from previous investigations at other temperatures by extrapolation of the activity data to 1573 K.

Jacobson, Nathan S.↗

Computer-aided analysis at NASA Langley Research Center - Looking toward the 1990's

Aerospace research is inextricably intertwined with the programmable digital computer. Engineers and scientists at NASA Langley Research Center are requiring ever-increasing computing resources to carry out basic and applied research on problems and complex systems that would have been unthinkable Just ten years ago. The rapid changes in computer technology make planning for the future especially difficult, even five years in advance. In this paper, the evolution of computer resources and usage in research at Langley are briefly considered over the past thirty years, followed by a snapshot of the present. Finally, an extrapolation to the 1990's computer environment is made, with some thoughts on the tasks that engineers might face, and the background they will probably need.

Petersen, Richard H.↗

Structural similitude and scaling laws for laminated beam-plates

The establishment of similarity conditions between two structural systems is discussed. Similarity conditions provide the relationship between a scale model and its prototype and can be used to predict the behavior of the prototype by extrapolating the experimental data of the corresponding small-scale model. Since satisfying all the similarity conditions simultaneously is difficult or even impossible, distorted models with partial similarity (with at least one similarity condition relaxed) are more practical. Establishing similarity conditions based on both dimensional analysis and direct use of governing equations is discussed, and the possibility of designing distorted models is investigated. The method is demonstrated through analysis of the cylindrical bending of orthotropic laminated beam-plates subjected to transverse line loads.

Simitses, G. J.↗

Properties of high-redshift Lyman-alpha clouds. I - Statistical analysis of the Schneider-Schmidt-Gunn quasars

Techniques for statistical analysis of the Lyman-alpha forest in high-redshift quasars are developed, and applied to the low-resolution (25 A) spectra of 29 of the 33 quasars in the Schneider-Schmidt-Gunn sample. We extrapolate each quasar's continuum shortward of Lyman-alpha emission, then consider each spectral bin of each quasar to be an (approximately) independent measurement of the absorption due to the Lyman-alpha clouds. With several thousand such measurements thus available, we can obtain good determinations of some interesting properties of clouds in the redshift range 2.5-4.3 without actually resolving any single cloud. We find that the mean absorption increases with z approximately as a power law (1 + z) exp (gamma + 1) with gamma = 2.46 +/- 0.37. The mean ratio of Lyman-alpha to Lyman-beta absorption in the clouds is 0.476 +/- 0.054. We also detect, and obtain ratios, for Lyma-gamma, delta, and possibly epsilon.

Press, William H.↗

Sputtering of cobalt and chromium by argon and xenon ions near the threshold energy region

Sputtering yields of cobalt and chromium by argon and xenon ions with energies below 50 eV are reported. The targets were electroplated on copper substrates. Measurable sputtering yields were obtained from cobalt with ion energies as low as 10 eV. The ion beams were produced by an ion gun. A radioactive tracer technique was used for the quantitative measurement of the sputtering yield. Co-57 and Cr-51 were used as tracers. The yield-energy curves are observed to be concave, which brings into question the practice of finding threshold energies by linear extrapolation.

Handoo, A. K.↗

A significant contribution to the cosmic X-ray background from sources associated with nearby galaxies

A revised limit on the local X-ray emissivity due to sources correlated with nearby galaxies is obtained. These results are extrapolated up to a redshift of about 5, and it is found that a smaller, but still significant, fraction of the X-ray background (30 +/- 15 percent) can be accounted for by these sources. Evolution of the source properties and/or a new population of sources at high redshift is required to explain the residual background emissions.

Lahav, O.↗