Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “experimental evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The impact of 17O + α reaction rate uncertainties on the s-process in rotating massive stars

ABSTRACT Massive stars are crucial to galactic chemical evolution for elements heavier than iron. Their contribution at early times in the evolution of the Universe, however, is unclear due to poorly constrained nuclear reaction rates. The competing 17O(α, γ)21Ne and 17O(α, n)20Ne reactions strongly impact weak s-process yields from rotating massive stars at low metallicities. Abundant 16O absorbs neutrons, removing flux from the s-process, and producing 17O. The 17O(α, n)20Ne reaction releases neutrons, allowing continued s-process nucleosynthesis, if the 17O(α, γ)21Ne reaction is sufficiently weak. While published rates are available, they are based on limited indirect experimental data for the relevant temperatures and, more importantly, no uncertainties are provided. The available nuclear physics has been evaluated, and combined with data from a new study of astrophysically relevant 21Ne states using the 20Ne(d, p)21Ne reaction. Constraints are placed on the ratio of the (α, n)/(α, γ) reaction rates with uncertainties on the rates provided for the first time. The new rates favour the (α, n) reaction and suggest that the weak s-process in rotating low-metallicity stars is likely to continue up to barium and, within the computed uncertainties, even to lead.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Portable Programming Model Exploration for LArTPC Simulation in a Heterogeneous Computing Environment: OpenMP vs. SYCL

The evolution of the computing landscape has resulted in the proliferation of diverse hardware architectures, with different flavors of GPUs and other compute accelerators becoming more widely available. To facilitate the efficient use of these architectures in a heterogeneous computing environment, several programming models are available to enable portability and performance across different computing systems, such as Kokkos, SYCL, OpenMP and others. As part of the High Energy Physics Center for Computational Excellence (HEP-CCE) project, we investigate if and how these different programming models may be suitable for experimental HEP workflows through a few representative use cases. One of such use cases is the Liquid Argon Time Projection Chamber (LArTPC) simulation which is essential for LArTPC detector design, validation and data analysis. Following up on our previous investigations of using Kokkos to port LArTPC simulation in the Wire-Cell Toolkit (WCT) to GPUs, we have explored OpenMP and SYCL as potential portable programming models for WCT, with the goal to make diverse computing resources accessible to the LArTPC simulations. In this work, we describe how we utilize relevant features of OpenMP and SYCL for the LArTPC simulation module in WCT. We also show performance benchmark results on multi-core CPUs, NVIDIA and AMD GPUs for both the OpenMP and the SYCL implementations. Comparisons with different compilers will also be given where appropriate.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Correlation-driven electronic reconstruction in FeTe 1−x Se x

Electronic correlation is of fundamental importance to high temperature superconductivity. While the low energy electronic states in cuprates are dominantly affected by correlation effects across the phase diagram, observation of correlation-driven changes in fermiology amongst the iron-based superconductors remains rare. Here we present experimental evidence for a correlation-driven reconstruction of the Fermi surface tuned independently by two orthogonal axes of temperature and Se/Te ratio in the iron chalcogenide family FeTe 1−x Se x . We demonstrate that this reconstruction is driven by the de-hybridization of a strongly renormalized d xy orbital with the remaining itinerant iron 3 d orbitals in the emergence of an orbital-selective Mott phase. Our observations are further supported by our theoretical calculations to be salient spectroscopic signatures of such a non-thermal evolution from a strongly correlated metallic phase into an orbital-selective Mott phase in d xy as Se concentration is reduced.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Evolution of magnetic field induced ordering in the layered quantum Heisenberg triangular-lattice antiferromagnet Ba 3 CoSb 2 O 9

Quantum fluctuations in the effective spin-12 layered triangular-lattice quantum Heisenberg antiferromagnet Ba 3 CoSb 2 O 9 lift the classical degeneracy of the antiferromagnetic ground state in magnetic field, producing a series of novel spin structures for magnetic fields applied within the crystallographic ab plane, including a celebrated collinear “up-up-down” spin ordering with magnetization equal to 1/3 of the saturation magnetization over an extended field range. Theoretically unresolved, however, are the effects of interlayer antiferromagnetic coupling and transverse magnetic fields on the ground states of this system. Additional magnetic field induced phase transitions are theoretically expected and in some cases have been experimentally observed, but details regarding their number, location, and physical character appear inconsistent with the predictions of existing models. Conversely, an absence of experimental measurements as a function of magnetic-field orientation has left other key predictions of these models untested. To address these issues, in this study we have used specific heat, neutron diffraction, thermal conductivity, and magnetic torque measurements to map out the phase diagram as a function of magnetic field intensity and orientation relative to the crystallographic ab plane. For H||ab, we have discovered an additional magnetic field induced phase transition at low temperature and an unexpected tetracritical point in the high-field phase diagram, which coupled with the apparent second-order nature of the phase transitions eliminates several theoretically proposed spin structures for the high-field phases. Our calorimetric measurements as a function of magnetic field orientation are in general agreement with theory for field-orientation angles close to plane parallel (H||a) but diverge at angles near plane perpendicular; a predicted convergence of two phase boundaries at finite angle and a corresponding change in the order of the field induced phase transition are not observed experimentally. Our results emphasize the role of interlayer coupling in selecting and stabilizing field induced phases, provide guidance on the nature of the magnetic order in each phase, and reveal the need for new physics to account for the nature of magnetic ordering in this archetypal two-dimensional spin-12 triangular-lattice quantum Heisenberg antiferromagnet.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Regulation of Electron Cloud Density by Electronic Effects of Substituents to Optimize Photocatalytic H 2 Evolution of Carbon Dots

Carbon dots (CDs) have a wide light absorption range, which are promising candidates for photocatalytic water splitting H 2 evolution, but they show low activity for hydrogen evolution reaction (HER) due to the slow transfer efficiencies of photogenerated carriers. The electron cloud density of photocatalyst is essential for the separation and migration of photogenerated carriers. In this study, the effect mechanism of electron cloud density regulated by the substituents with different electronic effects on the photocatalytic HER of glucose-based CDs is clarified. CDs-SO 3 H and CDs-OH are first obtained by introducing electron-drawing group (–SO 3 H) and electron-donating group (–OH) using a tailoring post-processing strategy. Experimental results show that the H 2 yield catalyzed by CDs-SO 3 H is 89.95 µmol•g –1 in 4 h, which is about four times that of CDs, and 7.4 times that of CDs-OH. The –SO 3 H induces a much negative energy band and high electron cloud density on CDs edges, promoting the separation and transfer of photogenerated carriers; while the CDs-OH exhibits a high positive charge density and an upward energy band, hindering the surface complexation of electron-hole pairs and HER. Furthermore, this study will provide an insight into the design of CDs catalysts with efficient photocatalytic HER at a molecular level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Critical impact of experimentally-driven strut level anisotropic material models in advanced stress analysis of additively manufactured lattice structures

The rapid acceleration in materials discovery may overshadow the importance of thoroughly understanding the mechanical performance of newly developed materials in demanding environments. The recent interest in combining parametric studies with machine learning techniques to explore how changes in specific processing parameters or model inputs affect the overall behavior of a material system can only be truly beneficial if the governing constitutive relations describing material behavior are accurately established. In this study, we demonstrate the critical impact of accurately representing strut-level anisotropic material behavior in advanced stress analysis of additively manufactured lattice structures (AMLS). We introduce a systematic experimental and modeling approach for developing strut-level anisotropic elastoplastic material models that account for the influence of microstructural features such as porosity, texture, and surface roughness on the development of local anisotropic mechanical properties, which vary with strut orientation relative to the build direction (BD). As a result the presented material model captures and relates the statistics of spatially varying struts’ microstructural features to the local stress distribution. Our findings suggest that incorporating strut-level anisotropic material behavior into unit cell analysis significantly influences the load distribution and evolution of local stresses within the structure. Therefore, accounting for this anisotropy is critical for developing an understanding of unit cell behavior and performance, including subsequent topology/component design optimization based on this analysis.

Sahoo, Subhadip [University of Arizona]↗
DOE OSTI2020

A conservative approach to scaling magneto-inertial fusion concepts to larger pulsed-power drivers

The Magnetized Liner Inertial Fusion (MagLIF) experimental platform [M. R. Gomez et al., Phys. Rev. Lett. 113, 155003 (2014)] represents the most successful demonstration of magneto-inertial fusion (MIF) techniques to date in pursuit of ignition and significant fusion yields. The pressing question remains regarding how to scale MIF concepts like MagLIF to more powerful pulsed-power drivers while avoiding significant changes in physical regimes that could adversely impact performance. In this work, we propose a conservative approach for scaling general MIF implosions, including MagLIF. Underpinning our scaling approach is a theoretical framework describing the evolution of the trajectory and thickness of a thin-walled, cylindrical, current-driven shell imploding on preheated, adiabatic fuel. By imposing that scaled implosions remain self-similar, we obtain a set of scaling rules expressing key target design parameters and performance metrics as functions of the maximum driver current I max . We identify several scaling paths offering unique, complementary benefits and trade-offs in terms of physics risks and driver requirements. Remarkably, when scaling present-day experiments to higher coupled energies, these paths are predicted to preserve or reduce the majority of known performance-degrading effects, including hydrodynamic instabilities, impurity mix, fuel energy losses, and laser-plasma interactions, with notable exceptions clearly delineated. In the absence of α heating, our scaling paths exhibit neutron yield per-unit-length scaling as $\tilde{Y}$∝[I$3\atop{max}$,I${4.14}\atop{max}$] and ignition parameter scaling as χ∝[I max ,I${2.14}\atop{max}$]. By considering the specific physics risks unique to each scaling path, we provide a roadmap for future investigations to evaluate different scaling options through detailed numerical studies and scaling-focused experiments on present-day facilities. Overall, these results highlight the potential of MIF as a key component of the national ignition effort.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Multiscale Imaging of Nuclear Deformation at the Electron-Ion Collider

We show within the Color Glass Condensate framework that exclusive vector meson production at high energy is sensitive to the geometric deformation of the target nucleus at multiple length scales. Studying e+U collisions and varying the deformation of the uranium target, we demonstrate that larger deformations result in enhanced incoherent vector meson production cross sections. Further, different multipole deformation parameters affect different regions of transverse momentum transfer. Employing JIMWLK evolution to study the Bjorken-x dependence of our results, we find that the ratio of incoherent to coherent cross sections decreases with decreasing x, largely independently of the quadrupole deformation of the target. Comparing results for the same process using 20 Ne targets with 16 O targets, we find that differences in deformation are clearly visible in the incoherent cross section. These findings show that certain observables at the Electron-Ion Collider are very sensitive to nuclear structure. Consequently, deformations need to be taken into account when interpreting experimental results. More importantly, this also means that |t|-differential diffractive vector meson production could become a powerful tool, enabling the most direct measurements of nuclear structure at different length scales, ranging from nuclear deformation at low |t| to nucleon and subnucleon-size scales at higher |t|.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Deciphering competing elementary steps to correlate electrocatalyst chemical state with activity

The overpotential in multielectron transfer heterogeneous electrocatalysis fundamentally arises from thermodynamic and kinetic disparities among elementary steps; however, deciphering coupled and competing steps has long remained a challenge. Here, we establish an electrochemical deconvolution paradigm based on key processes in electrocatalytic reactions, such as charge accumulation, electron/proton transfer, and intermediate evolution, to resolve competing elementary steps. Taking the oxygen evolution reaction as a prototypical reaction, we design a model catalyst featuring a precise isolated cation-anion vacancy pair and track the previously elusive electrochemical behavior of lattice oxygen by disentangling interference from adsorbed oxygen intermediates. Mechanistically, the lattice oxygen oxidation pathway originates from the spontaneous, nonelectrochemical deprotonation of replenished water molecules coordinated to unsaturated cation sites. Alternating current techniques further reveal that although lattice oxygen oxidation requires a higher potential than metal oxidation, it exhibits faster kinetics, providing insight into its superior catalytic activity. These findings establish a direct experimental correlation between the initial chemical state and the catalytic activity and prove surface-confined lattice oxygen cycling. Furthermore, expanding conventional potential-current analysis into a multidimensional framework enables disentanglement of thermodynamic and kinetic contributions of key elementary steps, thereby guiding the rational optimization of various complex multielectron transfer reactions.

OER↗
DOE OSTI2024

An Engineering Approach for Weld Creep Lifetime Assessment Based on Local Property Measurement

The localized creep failure in the heat-affected zone (HAZ) of Grade 91 steel weldments has been identified as one of the most important factors causing significantly shortened service lifetime and structural integrity issues of welded components in advanced fossil and nuclear power plants. To conduct a reliable creep lifetime assessment, a new engineering assessment approach has been developed by incorporating the experimentally determined local properties of the heterogeneous HAZ. By creep testing a purposely simulated HAZ specimen with in situ digital image correlation (DIC) technique, the highly gradient creep properties across the HAZ of Grade 91 steel was quantitatively measured. A physical creep cavitation constitutive model was proposed to investigate the local creep deformation and damage accumulation within the heterogeneous HAZ, which takes into account the nucleation of creep cavities and their growth by both grain boundary diffusion and creep deformation. The relationship among the local material property, creep strain accumulation, and evolution characteristic of creep cavities was established. The approach was then utilized to investigate the creep response and subsequent life for an ex-service 9% Cr steel weldment by incorporating the effects of pre-existing damages which developed and accumulated during long-term services. The predicted results exhibited quantitative agreement with the DIC measurement in terms of both nominal/local creep deformation as well as the subsequent life under the test conditions at 650 and 80 MPa.

Zhang, Wei↗
DOE OSTI2026

Room temperature sodium diffusion in sodium iron phosphate investigated with neutron scattering

Sodium iron phosphate, Na x FePO 4 , is currently one of the most promising cathode materials for sodium ion batteries. Here we employ a systematic approach using three neutron scattering techniques to investigate temperature dependent properties with a focus on the charge transfer processes. Two distinct Na + diffusive motions are observed with quasielastic neutron scattering, including room temperature motion. These processes correspond to rapid double jumps through extrinsic vacancy sites of ∼6 Å along with the more fundamental nearest neighbor jumps of 3.1 Å. Experimental observations of room temperature ionic diffusion are highly desirable, as the diffusion pathways are naturally well suited for efficient transport. Inelastic neutron scattering was used to probe the vibrational density of states that assist in the ionic and electronic (polaronic) transport processes, which are further supported with density functional theory. Neutron diffraction examines the disordering of the sodium sublattice upon transition to the solid-solution phase, which is believed to enhance the overall kinetics during sodium insertion/extraction. Finally, 57 Fe Mössbauer spectroscopy measurements probes polaron hopping and the local structural evolution that modifies the electron density surrounding the redox active iron sites. This study sheds light on the temperature induced atomic scale dynamics that occur in olivine Na x FePO 4 .

Novak, Eric [Swarthmore College, Swarthmore, PA (U↗
DOE OSTI2022

Mechanistic Advantages of Organotin Molecular EUV Photoresists

Here, extreme ultraviolet (EUV)-induced radiation exposure chemistry in organotin-oxo systems, represented by the archetypal [(R-Sn) 12 O 14 (OH) 6 ](A) 2 cage, has been investigated with density functional theory. Upholding existing experimental evidence of Sn-C cleavage-dominant chemistry, computations have revealed that either electron attachment or ionization can single-handedly trigger tin-carbon bond cleavage, partially explaining the current EUV sensitivity advantage of metal oxide systems. We have revealed that tin atoms at different parts of the molecule react differently to ionization and electron attachment and have identified such selectivity as a result of local coordination chemistry instead of the macro geometry of the molecule. An ionization-deprotonation pathway has also been identified to explain the observed evolution of an anion conjugate acid upon exposure and anion mass dependence in resist sensitivity.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Evidence of hydrogen-helium immiscibility at Jupiter-interior conditions

The phase behaviour of warm dense hydrogen–helium (H–He) mixtures affects our understanding of the evolution of Jupiter and Saturn and their interior structures. For example, precipitation of He from a H–He atmosphere at about 1–10 megabar and a few thousand kelvin has been invoked to explain both the excess luminosity of Saturn, and the depletion of He and neon (Ne) in Jupiter’s atmosphere as observed by the Galileo probe. But despite its importance, H–He phase behaviour under relevant planetary conditions remains poorly constrained because it is challenging to determine computationally and because the extremes of temperature and pressure are difficult to reach experimentally. Here we report that appropriate temperatures and pressures can be reached through laser-driven shock compression of H 2 –He samples that have been pre-compressed in diamond-anvil cells. This allows us to probe the properties of H–He mixtures under Jovian interior conditions, revealing a region of immiscibility along the Hugoniot. A clear discontinuous change in sample reflectivity indicates that this region ends above 150 gigapascals at 10,200 kelvin and that a more subtle reflectivity change occurs above 93 gigapascals at 4,700 kelvin. Considering pressure–temperature profiles for Jupiter, these experimental immiscibility constraints for a near-protosolar mixture suggest that H–He phase separation affects a large fraction—we estimate about 15 per cent of the radius—of Jupiter’s interior. Furthermore, this finding provides microphysical support for Jupiter models that invoke a layered interior to explain Juno and Galileo spacecraft observations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Operation above the Greenwald density limit in high performance DIII-D negative triangularity discharges

The density limit in strongly-shaped negative triangularity (NT) discharges is studied experimentally in the DIII-D tokamak. Record-high Greenwald fractions f G are obtained, using gas puff injection only, with values up to near 2, where f G is defined as the ratio of the line-averaged density over n G = I p /(π a 2 ), with I p [MA] the plasma current and a[m] the plasma minor radius. A clear higher operational limit with higher auxiliary power is also demonstrated, with the ohmic density limit about two times lower than with additional neutral beam injection heating. The evolution of the electron density, temperature and pressure profiles are analyzed as well. The core density can be up to twice the Greenwald density and keeps increasing, while the value at the separatrix remains essentially constant and slightly below n G . The edge temperature gradient collapses to near zero and NT plasmas are shown to be resilient to such profiles in terms of disruptivity. We also present the time evolution of the inverse electron pressure scale length with the value at the last closed flux surface (LCFS) decreasing below the value at the normalized radius 0.9 near the density limit, demonstrating the clear drop of confinement starting from the edge. This inverse scale length ‘collapse’ at the LCFS also defines well the characteristic behavior of the kinetic profiles approaching a density limit.

density limit↗
DOE OSTI2020

Experimental investigation of multi-scale strain-field heterogeneity in rocks

Rocks have inherently heterogeneous micro-structures. The mechanical response of these heterogeneous micro-structures primarily governs the overall macroscopic behavior of intact rocks, as these features cause heterogeneity in the distribution of stress and strain within a rock volume. These attributes have generally been studied through numerical tools, but in this study, the stress-induced multi-scale spatial heterogeneity in the strain-field of three types of rocks was analyzed experimentally. The full-field non-contact strain measurement approach of 2D Digital Image Correlation (DIC) was employed for real-time evaluation of the progression of strain-field heterogeneity across the surface of the rock specimens when subjected to uniaxial compression. The results show that the strain-field heterogeneity is a characteristic of the inherent heterogeneity of the rock specimens, and that it amplifies with the magnitude of stress applied on the rock specimens. The changes in the strain-field heterogeneity with loading were consistent with established microcrack evolution processes in the rock specimens. The statistical fluctuation in the strain-field heterogeneity of the three rocks at varying gauge lengths (GL) was then analyzed for the determination of the Representative Volume Element (RVE) length-scale at increasing load levels. The evolution of the RVE length-scale with loading facilitates an objective way of determination of the stress at which the strain-field heterogeneity increases and begins to influence the overall global response of the material. The RVE length-scale variation with loading showed that at the RVE length-scale reaches the specimen-scale at load levels well below the peak strength.

2D-digital image correlation↗
DOE OSTI2024

Capturing O2 Desorption Through Isoconversional Kinetics for CFD Application

The present work examines desorption mechanisms and kinetics of the calcium-doped strontium perovskite at 25% calcium content (i.e., Sr_0.75 Ca_0.25 FeO_(3-δ)). Laboratory-scale, low inventory, fixed bed redox cycle experiments were developed and conducted in both dry and steam-based environments for three isothermal temperatures, 450, 500 and 550C. The temporal evolution of the conversion extent of the material sample over the redox cycles were obtained through the analysis of the gaseous products of the redox reactions. Using subsequently isoconversional differential methods, it was found that the activation energy exhibits a strong dependence on the extent of conversion during the desorption of this perovskite. In addition, the reconstruction of the reaction model showed that the desorption kinetics are controlled by a three-step mechanism. A successful a priori verification of the isoconversional desorption kinetics against the dry and steam-based environment desorption experimental data are shown.

Konan, Ndri A.↗
DOE OSTI2022

Pulse-level noisy quantum circuits with QuTiP

The study of the impact of noise on quantum circuits is especially relevant to guide the progress of Noisy Intermediate-Scale Quantum (NISQ) computing. In this paper, we address the pulse-level simulation of noisy quantum circuits with the Quantum Toolbox in Python (QuTiP). We introduce new tools in qutip-qip, QuTiP's quantum information processing package. These tools simulate quantum circuits at the pulse level, leveraging QuTiP's quantum dynamics solvers and control optimization features. We show how quantum circuits can be compiled on simulated processors, with control pulses acting on a target Hamiltonian that describes the unitary evolution of the physical qubits. Various types of noise can be introduced based on the physical model, e.g., by simulating the Lindblad density-matrix dynamics or Monte Carlo quantum trajectories. In particular, the user can define environment-induced decoherence at the processor level and include noise simulation at the level of control pulses. We illustrate how the Deutsch-Jozsa algorithm is compiled and executed on a superconducting-qubit-based processor, on a spin-chain-based processor and using control optimization algorithms. We also show how to easily reproduce experimental results on cross-talk noise in an ion-based processor, and how a Ramsey experiment can be modeled with Lindblad dynamics. Finally, we illustrate how to integrate these features with other software frameworks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Anisotropic flow and flow fluctuations of identified hadrons in Pb–Pb collisions at $ \sqrt{s_{\textrm{NN}}}$ = 5.02 TeV

The first measurements of elliptic flow of π ± , K ± , p+$\bar{p}$, K$_{S}^{0}$, Λ+$\bar{Λ}$, $\phi$, Ξ – +$\barΞ$ + , and Ω – +$\barΩ$ + using multiparticle cumulants in Pb–Pb collisions at $\sqrt{s_{NN}}$= 5.02 TeV are resented. Results obtained with two- (v 2 {2}) and four-particle cumulants (v 2 {4}) are shown as a function of transverse momentum, p T , for various collision centrality intervals. Combining the data for both v 2 {2} and v 2 {4} also allows us to report the first measurements of the mean elliptic flow, elliptic flow fluctuations, and relative elliptic flow fluctuations for various hadron species. These observables probe the event-by-event eccentricity fluctuations in the initial state and the contributions from the dynamic evolution of the expanding quark–gluon plasma. The characteristic features observed in previous p T -differential anisotropic flow measurements for identified hadrons with two-particle correlations, namely the mass ordering at low p T and the approximate scaling with the number of constituent quarks at intermediate p T , are similarly present in the four-particle correlations and the combinations of v 2 {2} and v 2 {4}. In addition, a particle species dependence of flow fluctuations is observed that could indicate a significant contribution from final state hadronic interactions. The comparison between experimental measurements and CoLBT model calculations, which combine the various physics processes of hydrodynamics, quark coalescence, and jet fragmentation, illustrates their importance over a wide p T range.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗