SEARCH · Engineering Papers
Results for “elevation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Persistent reduced ecosystem respiration after insect disturbance in high elevation forests
Amid a worldwide increase in tree mortality, mountain pine beetles (Dendroctonus ponderosae Hopkins) have led to the death of billions of trees from Mexico to Alaska since 2000. This is predicted to have important carbon, water and energy balance feedbacks on the Earth system. Counter to current projections, we show that on a decadal scale, tree mortality causes no increase in ecosystem respiration from scales of several square metres up to an 84 km2 valley. Rather, we found comparable declines in both gross primary productivity and respiration suggesting little change in net flux, with a transitory recovery of respiration 6–7 years after mortality associated with increased incorporation of leaf litter C into soil organic matter, followed by further decline in years 8–10. The mechanism of the impact of tree mortality caused by these biotic disturbances is consistent with reduced input rather than increased output of carbon.
Elevated CO 2 and water addition enhance nitrogen turnover in grassland plants with implications for temporal stability
Not provided.
Forest water use and water use efficiency at elevated CO2: a model-data intercomparison at two contrasting temperate forest FACE sites
Explore the source record for details and available documents.
Elevated carbon dioxide and ozone alter productivity and ecosystem carbon content in northern temperate forests
N/A
Climate cooling benefits of cellulosic bioenergy crops from elevated albedo
Abstract Changes in land surface albedo can alter ecosystem energy balance and potentially influence climate. We examined the albedo of six bioenergy cropping systems in southwest Michigan USA: monocultures of energy sorghum ( Sorghum bicolor ), switchgrass ( Panicum virgatum L.), and giant miscanthus ( Miscanthus × giganteus) , and polycultures of native grasses, early successional vegetation, and restored prairie. Direct field measurements of surface albedo ( α s ) from May 2018 through December 2020 at half‐hourly intervals in each system quantified the magnitudes and seasonal differences in albedo (∆ α ) and albedo‐induced radiative forcing (RF ∆ α ). We used a nearby forest as a historical native cover type to estimate reference albedo and RF ∆ α change upon original land use conversion, and a continuous no‐till maize ( Zea mays L .) system as a contemporary reference to estimate change upon conversion from annual row crops. Annually, α s differed significantly ( p < 0.05) among crops in the order: early successional (0.288 ± 0.012SE) >> miscanthus (0.271 ± 0.009) ≈ energy sorghum (0.270 ± 0.010) ≥ switchgrass (0.265 ± 0.009) ≈ restored prairie (0.264 ± 0.012) > native grasses (0.259 ± 0.010) > maize (0.247 ± 0.010). Reference forest had the lowest annual α s (0.134 ± 0.003). Albedo differences among crops during the growing season were also statistically significant, with growing season α s in perennial crops and energy sorghum on average ~20% higher (0.206 ± 0.003) than in no‐till maize (0.184 ± 0.002). Average non‐growing season (NGS) α s (0.370 ± 0.020) was much higher than growing season α s (0.203 ± 0.003) but these NGS differences were not significant. Overall, the original conversion of reference forest and maize landscapes to perennials provided a cooling effect on the local climate (RF αMAIZE : −3.83 ± 1.00 W m −2 ; RF αFOREST : −16.75 ± 3.01 W m −2 ). Significant differences among cropping systems suggest an additional management intervention for maximizing the positive climate benefit of bioenergy crops, with cellulosic crops on average ~9.1% more reflective than no‐till maize, which itself was about twice as reflective as the reference forest.
Oxidation performance and limitations of additively manufactured SiC/Si-O-C composites at elevated temperatures
Here, SiC preforms were infiltrated with polycarbosiloxane preceramic polymer to create low-cost SiC—Si x O y C z matrix composites for possible high temperature application. The effect of specimen annealing conditions on the steam and air oxidation resistance was analyzed. Air exposures from 900–1500°C showed stability of the Si x O y C z matrix phase with moderate oxidation resistance. After 900°C exposures, oxidation of the composite is primarily limited to the matrix phase, and only at 1200 and 1500°C was SiC consumption visualized. Steam cycle exposures at 1200°C resulted in rapid linear oxidation of the composites with induced specimen swelling from volume expansion associated with internal oxidation. Specimens annealed in argon were found to be the most oxidation resistant due to increased matrix crystallinity and carbon retention. The results of this work were used to develop clear strategies for improving the high-temperature properties of SiC—Si x O y C z composites.
The role of material modeling on strain range estimation for elevated temperature cyclic life evaluation
High temperature nuclear reactors operating in the creep regime are designed to withstand numerous cyclic events. Current ASME code rules provide two basic paths for evaluating creep fatigue and ratcheting under these conditions; one based on full inelastic analysis intended to provide a representative stress and strain history and the other based on elastic material models with adjustments of varying complexity to account for inelastic stress and strain redistribution. More recent developments have used elastic-perfectly plastic analysis to bound the effects of cyclic service. However, these methods still rely on the separate evaluation of fatigue and creep damage utilizing a damage interaction diagram. There is a procedure under current development that uses creep-fatigue data from key feature test articles directly without the use of the damage interaction diagram. However, it requires a reasonable representation of the strain range in a structure as an input. This work develops a simplified procedure based on elastic perfectly-plasticity analysis that can be used to represent the strain range in a structure in the steady state under cyclic loading conditions.
Magnetron-sputter epitaxy of {beta}-FeSi{sub 2}(220)/Si(111) and {beta}-FeSi{sub 2}(431)/Si(001) thin films at elevated temperatures
{beta}-FeSi{sub 2} thin films have been grown on Si(111) and Si(001) substrates by magnetron-sputter epitaxy at 700 Degree-Sign C. On Si(111), the growth is consistent with the commonly observed orientation of [001]{beta}-FeSi{sub 2}(220)//[1-10]Si(111) having three variants, in-plane rotated 120 Degree-Sign with respect to one another. However, on Si(001), under the same growth conditions, the growth is dominated by [-111]{beta}-FeSi{sub 2}(431)//[110]Si(001) with four variants, which is hitherto unknown for growing {beta}-FeSi{sub 2}. Photoelectron spectra reveal negligible differences in the valance-band and Fe2p core-level between {beta}-FeSi{sub 2} grown on Si(111) and Si(001) but an apparent increased Si-oxidization on the surface of {beta}-FeSi{sub 2}/Si(001). This phenomenon is discussed and attributed to the Si-surface termination effect, which also suggests that the Si/Fe ratio on the surface of {beta}-FeSi{sub 2}(431)/Si(001) is larger than that on the surface of {beta}-FeSi{sub 2}(220)/Si(111).
TU-EF-304-05: Anterior Proton Beams for Prostate Treatments Lead to Substantial Elevations in Modeled RBE-Weighted Rectal Dose
Purpose: If a constant RBE of 1.1 is assumed, range-verified anterior oblique (AO) proton beams appear to offer the potential to reduce the mean dose delivered to the rectum, anterior rectal wall and penile bulb by a factor of ∼2 relative to standard bilateral (SB) proton beam arrangements. Additionally, AO proton beams targeted at the prostate avoid the femoral heads and so form a particularly appealing option for patients with hip prostheses. This study investigates LET enhancement at the distal edge of AO SOBPs, applying RBE models to consider the extent to which AO beams lead to hotspots in rectum biological dose. Methods: Eight patients were selected, all treated with passively scattered, SB proton beams to 79.2Gy(E) within the prostate and 50.4Gy(E) within the proximal 5–15mm of seminal vesicles. Additional plans utilizing AO beams (±35°) were created in XiO (Elekta) assuming a fixed RBE of 1.1. Voxelised dose and LET distributions were calculated using Monte Carlo (TOPAS). Three different LET/RBE models were applied (Carabe 2012, Wedenberg 2013, McNamara 2015). Results: Across the eight patients, the mean LET within the rectal wall was found to be 3.5(3.2–4.0)keV/µm for the SB plans compared to 10.5(8.6–13.0)keV/µm for the AO plans. Application of the median LET/RBE model to the AO plans, rather than a fixed RBE of 1.1, resulted in an increase of 13.6(11.9–14.7)GyRBE in maximum rectal wall (1cc) RBEw dose, leading to values of 90.4(90.0–91.3)GyRBE. Conclusion: relative to SB proton beams, AO proton beams exhibit substantially increased mean LET values within the rectal wall. For the passively scattered AO beams, modeling indicates that this enhancement is likely to translate into unacceptable RBEw dose hotspots. Whilst no RBE- LET model has yet been fully validated in-vivo, caution must be applied if AO beams are to be considered for prostate patients.
Modeling and observations of an elevated, moving infrasonic source: Eigenray methods
In this paper, the acoustic ray tracing relations are extended by the inclusion of auxiliary parameters describing variations in the spatial ray coordinates and eikonal vector due to changes in the initial conditions. Computation of these parameters allows one to define the geometric spreading factor along individual ray paths and assists in identification of caustic surfaces so that phase shifts can be easily identified. A method is developed leveraging the auxiliary parameters to identify propagation paths connecting specific source-receiver geometries, termed eigenrays. The newly introduced method is found to be highly efficient in cases where propagation is non-planar due to horizontal variations in the propagation medium or the presence of cross winds. Finally, the eigenray method is utilized in analysis of infrasonic signals produced by a multi-stage sounding rocket launch with promising results for applications of tracking aeroacoustic sources in the atmosphere and specifically to analysis of motor performance during dynamic tests.
Geodynamically corrected Pliocene shoreline elevations in Australia consistent with midrange projections of Antarctic ice loss
The Mid-Pliocene represents the most recent interval in Earth history with climatic conditions similar to those expected in the coming decades. Mid-Pliocene sea level estimates therefore provide important constraints on projections of future ice sheet behavior and sea level change but differ by tens of meters due to local distortion of paleoshorelines caused by mantle dynamics. We combine an Australian sea level marker compilation with geodynamic simulations and probabilistic inversions to quantify and remove these post-Pliocene vertical motions at continental scale. Dynamic topography accounts for most of the observed sea level marker deflection, and correcting for this effect and glacial isostatic adjustment yields a Mid-Pliocene global mean sea level of +16.0 (+10.4 to +21.5) m (50th/16th to 84th percentiles). Recalibration of recent high-end sea level projections using this revised estimate implies a more stable Antarctic Ice Sheet under future warming scenarios, consistent with midrange forecasts of sea level rise that do not incorporate a marine ice cliff instability.
Elevated Expression of a Functional Suf Pathway in Escherichia coli BL21(DE3) Enhances Recombinant Production of an Iron-Sulfur Cluster-Containing Protein
Structural and spectroscopic analysis of iron-sulfur [Fe-S] cluster-containing proteins is often limited by the occupancy and yield of recombinantly produced proteins. In this work, we report that Escherichia coli BL21(DE3), a strain routinely used to overproduce [Fe-S] cluster-containing proteins, has a nonfunctional Suf pathway, one of two E. coli [Fe-S] cluster biogenesis pathways. We confirmed that BL21(DE3) and commercially available derivatives carry a deletion that results in an in-frame fusion of sufA and sufB genes within the sufABCDSE operon. We show that this fusion protein accumulates in cells but is inactive in [Fe-S] cluster biogenesis. Restoration of an intact Suf pathway combined with enhanced suf operon expression led to a remarkable (~3-fold) increase in the production of the [4Fe-4S] cluster-containing BchL protein, a key component of the dark-operative protochlorophyllide oxidoreductase complex. These results show that this engineered “SufFeScient” derivative of BL21(DE3) is suitable for enhanced large-scale synthesis of an [Fe-S] cluster-containing protein.
Technological Features of Irradiation of Sip{sup +}-n-n{sup +} Diodes with Electrons at Elevated Temperatures
The behavior of the lifetime of nonequilibrium charge carriers {tau}{sub p}, the reverse current I{sub R}, and the forward-voltage drop U{sub F} in electron-irradiated (E{sub irr} = 6 MeV) commercial p{sup +}-n-n{sup +} diodes at irradiation temperatures in the range of T{sub irr} = 20-400 Degree-Sign C is studied. Studies have been performed for samples fabricated on a single-crystal Si substrate either doped with phosphorus in the course of growth by the Czochralski method (Cz-n-Si:P) or doped with phosphorus by nuclear transmutations, neutron-transmutation doped Si (NTD n-Si:P). It is shown that, by choosing the temperature conditions of technological irradiation, one can solve the problem of attaining small values of {tau}{sub p} at a minimal increase in U{sub F} and I{sub R} in fast-response diodes. It is established that, in the case of comparable variations in {tau}{sub p} in the base region of diodes, the best relation between U{sub F} and I{sub R} is observed at T{sub irr} = 300 Degree-Sign C in n-Si:P samples doped by the Czochralski method and at T{sub irr} = 350 Degree-Sign C in samples doped by reactions induced by thermal neutrons.
Light-induced relaxation of the metastable conductivity of undoped a-Si:H films illuminated at elevated temperatures
The kinetics of relaxation of the light-induced (at a temperature above 140°C) dark conductivity of undoped a-Si:H films is studied. The calculated time dependences of the relaxation rate of the dark conductivity are analyzed under the assumption that the thermal rates of the generation and relaxation of metastable defects formed by preliminary illumination are independent of illumination. It is shown that the features of the kinetics of the relaxation rates of dark conductivity under illumination are determined by the presence of light-induced processes of the relaxation and generation of slowly relaxing metastable defects whose energy levels are located in the upper half of the band gap.
CdHgTe heterostructures for new-generation IR photodetectors operating at elevated temperatures
The parameters of multilayer Cd{sub x}Hg{sub 1–x}Te heterostructures for photodetectors operating at wavelengths of up to 5 μm, grown by molecular-beam epitaxy (MBE) on silicon substrates, are studied. The passivating properties of thin CdTe layers on the surface of these structures are analyzed by measuring the C–V characteristics. The temperature dependences of the minority carrier lifetime in the photoabsorption layer after growth and thermal annealing are investigated. Samples of p{sup +}–n-type photodiodes are fabricated by the implantation of arsenic ions into n-type layers, doped with In to a concentration of (1–5) × 10{sup 15} cm{sup –3}. The temperature dependences of the reverse currents are measured at several bias voltages; these currents turn out to be almost two orders of magnitude lower than those for n{sup +}–p-type diodes.
Bonding Energy of Silicon and Sapphire Wafers at Elevated Temperatures of Joining
The hydrophilicity of surfaces and the bonding energy of silicon and sapphire wafers at the temperature of joining 50°C are studied. It is established that heating of the Si and Al{sub 2}O{sub 3} wafers to 50°C is accompanied by an increase in the degree of hydrophilicity of the wafer surfaces. The effect is attributed to improvement in the surface purity due to the desorption of impurity atoms into vacuum and to an increase in the density of dangling bonds. It is found that the bonding energy of silicon and sapphire wafers joined at a temperature of 50°C and upon further heating in the range 100–250°C is higher compared to the bonding energy of wafers joined at room temperature. The activation energy of the growth of the bonding energy is determined. It is found that this activation energy is 0.57 eV.
Predictive analytics to direct clinical attention to complex patients with elevated suicide risk: enhancement of the Veterans Health Administration REACH VET model
Suicide is a major public health concern, particularly among Veterans. The U.S. Department of Veterans Affairs Veterans Health Administration (VHA) employs the Recovery Engagement and Coordination for Health–Veterans Enhanced Treatment (REACH VET) model to prioritise high-risk patients for targeted clinical attention. REACH VET 1.0 (RV 1.0) was developed on 2008–2011 data. To reflect changes in clinical practice and populations, VHA updated it to REACH VET 2.0 (RV 2.0). This study describes its development and validation. RV 2.0 used longitudinal data from 7,248,170 VHA patients (4,967 suicide deaths) in 2018–2019, with 650 time-varying demographic, clinical and area-level predictors derived from a 2-year lookback (2016–2019). An ensemble of Elastic-Net logistic regression models was trained on 2018 data and evaluated monthly at the population level in 2019, focusing on the top 0.1% intervention risk tier. Analyses assessed model discrimination, suicide detection, risk concentration, subgroup consistency (sex, age and race/ethnicity) and performance relative to RV 1.0 using the same percentile-based risk strata. RV 2.0 outperformed RV 1.0 across all risk strata, with better discrimination (C-statistic 0.76 vs 0.69) and consistent performance across demographic subgroups. Within the top 0.1% of predicted risk, RV 2.0 identified more deaths, higher suicide rates and greater mortality risk concentration both when averaged across the 12 monthly 2019 test sets (5.6 vs 3.6; 83.6 vs 53.7 per 100,000 person-years; 21.0 vs 14.1) and when annualised for 2019 (67 vs 43; 2.7% vs 1.7%; 1,003 vs 644 per 100,000 person-years; 26.7 vs 17.1). RV 2.0 improves suicide risk stratification among Veterans, demonstrating better performance and consistent prediction across subgroups and highlighting the need for regular model updates and evaluation.