Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Spectroscopic study of a dark lane and a cool loop in a solar limb active region by Hinode/EIS

We investigated a cool loop and a dark lane over a limb active region on 2007 March 14 using the Hinode/EUV Imaging Spectrometer. The cool loop is clearly seen in the spectral lines formed at the transition region temperature. The dark lane is characterized by an elongated faint structure in the coronal spectral lines and is rooted on a bright point. We examined their electron densities, Doppler velocities, and nonthermal velocities as a function of distance from the limb. We derived electron densities using the density sensitive line pairs of Mg VII, Si X, Fe XII, Fe XIII, and Fe XIV spectra. We also compared the observed density scale heights with the calculated scale heights from each peak formation temperatures of the spectral lines under the hydrostatic equilibrium. We noted that the observed density scale heights of the cool loop are consistent with the calculated heights, with the exception of one observed cooler temperature; we also found that the observed scale heights of the dark lane are much lower than their calculated scale heights. The nonthermal velocity in the cool loop slightly decreases along the loop, while nonthermal velocity in the dark lane sharply falls off with height. Such a decrease in the nonthermal velocity may be explained by wave damping near the solar surface or by turbulence due to magnetic reconnection near the bright point.

79 ASTRONOMY AND ASTROPHYSICS↗

The effects of He I λ10830 on helium abundance determinations

Observations of helium and hydrogen emission lines from metal-poor extragalactic H II regions, combined with estimates of metallicity, provide an independent method for determining the primordial helium abundance, Y{sub p}. Traditionally, the emission lines employed are in the visible wavelength range, and the number of suitable lines is limited. Furthermore, when using these lines, large systematic uncertainties in helium abundance determinations arise due to the degeneracy of physical parameters, such as temperature and density. Recently, Izotov, Thuan, and Guseva (2014) have pioneered adding the He I λ10830 infrared emission line in helium abundance determinations. The strong electron density dependence of He I λ10830 makes it ideal for better constraining density, potentially breaking the degeneracy with temperature. We revisit our analysis of the dataset published by Izotov, Thuan, and Stasi and apos;nska (2007) and incorporate the newly available observations of He I λ10830 by scaling them using the observed-to-theoretical Paschen-gamma ratio. The solutions are better constrained, in particular for electron density, temperature, and the neutral hydrogen fraction, improving the model fit to data, with the result that more spectra now pass screening for quality and reliability, in addition to a standard 95% confidence level cut. Furthermore, the addition of He I λ10830 decreases the uncertainty on the helium abundance for all galaxies, with reductions in the uncertainty ranging from 10–80%. Overall, we find a reduction in the uncertainty on Y{sub p} by over 50%. From a regression to zero metallicity, we determine Y{sub p} = 0.2449 ± 0.0040, consistent with the BBN result, Y{sub p} = 0.2470 ± 0.0002, based on the Planck determination of the baryon density. The dramatic improvement in the uncertainty from incorporating He I λ10830 strongly supports the case for simultaneous (thus not requiring scaling) observations of visible and infrared helium emission line spectra.

79 ASTRONOMY AND ASTROPHYSICS↗

SU-E-T-663: Radiation Properties of a Water-Equivalent Material Formulated Using the Stoichiometric Analysis Method in Heavy Charged Particle Therapy

Purpose: A material has been designed to be employed as water-equivalent in particle therapy using a previously established stoichiometric analysis method (SAM). After manufacturing, experimental verification of the material’s water-equivalent path length (WEPL) and analysis of its total inelastic nuclear interaction cross sections for proton beams were performed. Methods: Using the SAM, we optimized the material composed of three base materials, i.e., polyurethane, calcium carbonate and microspheres. From the elemental composition of the compound, electron density, linear attenuation coefficients, particle stopping powers and inelastic nuclear cross sections for protons using data from ICRU 63 were calculated. The calculations were then compared to Hounsfield units (HUs) measured with 350 mAs at 80, 100, 120 and 140 kV and the WEPLs measured with three different ions: proton (106.8 MeV/u), helium (107.93 MeV/u) and carbon (200.3 MeV/u). Results: The material’s measured HUs (0.7±3.0 to 2.6±6.2 HU) as well as its calculated relative electron density (1.0001) are in close agreement with water as reference. The WEPLs measured on a 20.00 mm thick target were 20.16±0.12, 20.29±0.12 and 20.38±0.12 mmH2O for proton, helium and carbon ions, respectively. Within measurement uncertainties, these values verified the calculated WEPLs of 20.28 mmH2O (proton), 20.28 mmH2O (helium) and 20.26 mmH2O (carbon). Moreover, the calculated proton inelastic cross sections of the material differed only by 0.89% (100 MeV/u) and 0.01% (200 MeV/u) when compared to water. Conclusion: The SAM is capable of optimizing material with defined properties, e.g., HU, electron density, WEPL and inelastic nuclear interaction cross section for particle therapy. Such material will have a wide range of applications amongst others absolute dosimetry. This work was supported by grant ZIM KF2137107AK4 from the German Federal Ministry for Economic Affairs and Energy.

07 ISOTOPE AND RADIATION SOURCES↗

Fast scanning probe for the NSTX spherical tokamak

We describe a fast reciprocating Langmuir probe and drive system, which has four main new features: (1) use of high-temperature, vacuum, circuit boards instead of cables to reduce weight and increase to 21 the number of possible connections, (2) rotatable and removable shaft, (3) 10 tip construction with designed hardware bandwidth up to 10 MHz, and (4) a detachable and modular tip assembly for easy maintenance. The probe is mounted in a fast pneumatic drive capable of speeds {approx}7 m/s and {approx}20g's acceleration in order to reach the scrape-off layer (SOL) and pedestal regions and remain inserted long enough to obtain good statistics while minimizing the heat deposition to the tips and head in a power density environment of 1-10 MW/m{sup 2}. The National Spherical Torus Experiment SOL features electron temperature, T{sub e}{approx}10-30 eV, and electron density, n{sub e}{approx}0.1-5x10{sup 12} cm{sup -3} while the pedestal features n{sub e}{approx}0.5-1.5x10{sup 13} cm{sup -3} and T{sub e}{approx}30-150 eV. The probe described here has ten tips which obtain a wide spectrum of plasma parameters: electron temperature profile T{sub e}(r), electron density profile n{sub e}(r) and Mach number profile M(r), floating potential V{sub f}(r), poloidal and radial electric field profiles E{sub {theta}}(r) and E{sub {rho}}(r), saturation current profile I{sub sat}(r), and their fluctuations up to 3 MHz. We describe the probe and show representative radial profiles of various parameters.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Metal ions and isotopes in sporadic E-layers during the Perseid meteor shower

The electron density and positive-ion composition above Wallops Island were measured on August 12, 1976, about 12 hours after the maximum of the Perseid shower. At launch time, 4.5 MHz was recorded for fbEs, corresponding to an electron density of 2.4 x 10 to the 5th power per cu cm. Electron profile and ion composition measurements confirmed the presence of a sporadic E-layer with two maxima at 101.3 and 105.4 km. The electron density was measured with a pair of boom-mounted probes at fixed potential. The positive ion composition above 77 km was measured with a magnetic mass spectrometer employing a liquid He cryopump. Some of the salient results of the (still incomplete) analysis are discussed.

Herrmann, U.↗

Structural reasons for the nonlinear optical properties of KTi{sub 0.96}Zr{sub 0.04}OPO{sub 4} single crystals

This paper reports on the results of the precision X-ray structural investigations of KTi{sub 0.96}Zr{sub 0.04}OPO{sub 4} single crystals at room temperature. It is established that the incorporation of zirconium atoms into the structure of KTiOPO{sub 4} (KTP) crystals does not lead to substantial changes in the framework structure and results only in an insignificant decrease in the scatter of the distances in the PO{sub 4} tetrahedra and the formation of more symmetric (TiZr)O{sub 6} octahedra as compared to the TiO{sub 6} octahedra. However, the incorporation of zirconium atoms into the KTP structure is accompanied by the redistribution of the electron density in the crystal as a whole, so that the electron density increases in the region of the positions occupied by the potassium atoms. This changes the nonlinear optical properties of the given series of crystals, which are estimated from the intensity of the second harmonic generation signals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Time delay occultation data of the Helios spacecrafts and preliminary analysis for probing the solar corona

S-band time delay measurements were collected from the spacecrafts Helios A and B during three solar occultations in 1975/76 within heliocentric distances of about 3 and 215 solar radii in terms of range, Doppler frequency shift, and electron content. A description is given concerning some characteristic features of the methods of measurement and data processing. Typical data sets are discussed to probe the electron density distribution near the sun (west and east limb as well) including the outer and extended corona. Steady-state and dynamical aspects of the solar corona are presented and compared with earth-bound K-coronagraph measurements. Using a weighted least squares estimation 3 parameters of an average coronal electron density profile are derived in a preliminary analysis to yield electron densities of about 130 billion; 100 million; 7 million/cu m at r?3; 65; 215 solar radii. Transient phenomena are discussed and a velocity of propagation v approximately 900 km/s for plasma ejecta from a solar flare is determined from an extraordinary set of Helios B electron content measurements on April 30/May 1, 1976.

Edenhofer, P.↗

The auroral kilometric radiation from Uranus and its magnetospheric implications

The Gulkis and Carr (1987) emission beam model for the kilometric radio emission from Uranus and types of information regarding the Uranian inner magnetosphere that may be derivable from its application are discussed. A modeled electron density profile is presented. The manner in which the hollow-cone beam from each element of the distributed auroral-zone source varies with frequency is determined. It is suggested that the observed effects might be due to refraction by a smooth component of the electron density variation with distance, together with multiple small refractions by electron density inhomogeneities along the ray path.

Carr, Thomas D.↗

Role of oxygen on the optical properties of borate glass doped with ZnO

Lithium tungsten borate glass (0.56-x)B{sub 2}O{sub 3}-0.4Li{sub 2}O-xZnO-0.04WO{sub 3} (0{<=}x{<=}0.1 mol%) is prepared by the melt quenching technique for photonic applications. Small relative values of ZnO are used to improve the glass optical dispersion and to probe as well the role of oxygen electronic polarizability on its optical characteristics. The spectroscopic properties of the glass are determined in a wide spectrum range (200-2500 nm) using a Fresnel-based spectrophotometric technique. Based on the Lorentz-Lorenz theory, as ZnO content increases on the expense of B{sub 2}O{sub 3} the glass molar polarizability increased due to an enhanced unshared oxide ion 2p electron density, which increases ionicity of the chemical bonds of glass. The role of oxide ion polarizability is explained in accordance with advanced measures and theories such as optical basicity, O 1s binding energy, the outer most cation binding energy in Yamashita-Kurosawa's interionic interaction parameter and Sun's average single bond strength. FT-IR measurements confirm an increase in bridging oxygen bonds, as a result of replacement of ZnO by B{sub 2}O{sub 3}, which increase the UV glass transmission window and transmittance. - Graphical abstract: O1s, Yamashita-Kurosawa's parameter and average single bond strength of charge overlapping between electronic shells are used to explain enhanced oxide ion 2p electron density, which increases refractive index of glasses. Highlights: > New borate glass for photonic application is prepared. > The dispersion property of the glass is effectively controlled using small amounts of ZnO. > ZnO is used to probe the glass structure and investigate the role of oxygen on the obtained optical properties of the glasses. > Modern theories are used to explain enhanced unshared oxide ion 2p electron density, which increases ionicity of chemical bonds of the glass.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultra-bright XUV emission from laser wakefields in underdense plasma

By use of particle-in-cell (PIC) simulation, we observe ultra-bright XUV radiation pulses emerging from a laser wakefield driven above the wave-breaking threshold in underdense plasma, which is as short as a few hundred attoseconds in one-dimentsional simulations and a few femtoseconds in two-dimensional simulations. It is concerned with the formation of a transverse narrow current layer co-moving with the intense laser pulse. This current layer is formed by an electron density spike with trapped electrons in the wakefield with certain transverse kinetic momentum of electrons left behind the laser pulse. This net momentum appears when the driving laser pulse undergoes strong selfmodulation and subsequent pulse steepening at the front. In the multi-dimensional simulations, the XUV emission is found only near the laser axis with a much smaller spot size than the laser pulse due to the transverse dynamics of the trapped electrons. The present scheme provides an alternative method to produce ultra-bright XUV pulses for ultrafast applications.

07 ISOTOPE AND RADIATION SOURCES↗

Two-dimensional electron gas in monolayer InN quantum wells

We report in this letter experimental results that confirm the two-dimensional nature of the electron systems in a superlattice structure of 40 InN quantum wells consisting of one monolayer of InN embedded between 10 nm GaN barriers. The electron density and mobility of the two-dimensional electron system (2DES) in these InN quantum wells are 5 × 10{sup 15 }cm{sup −2} (or 1.25 × 10{sup 14 }cm{sup −2} per InN quantum well, assuming all the quantum wells are connected by diffused indium contacts) and 420 cm{sup 2}/Vs, respectively. Moreover, the diagonal resistance of the 2DES shows virtually no temperature dependence in a wide temperature range, indicating the topological nature of the 2DES.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurement of plasma temperature and density using radiation absorption

A light beam of predetermined wavelength, preferably monochromatic, is directed through a plasma to be measured. The absorption of the light by the plasma is detected for deriving an absorption coefficient of the plasma. Knowing the absorption coefficient of the plasma and independently measuring either the electron density or temperature of the plasma allows solution of an equation to derive the other unknown quantity, i.e. either electron density or temperature. In a preferred method, the absorption coefficient of the plasma is derived simultaneously for two probing light beams of substantially different predetermined wave-lengths. Knowing these two coefficients allows solution of two simultaneous equations to derive the electron density and temperature of the plasma.

Kenneth W Billman↗

On the use of the double floating probe method to infer the difference between the electron and the heavy particles temperatures in an atmospheric pressure, vortex-stabilized nitrogen plasma jet

Sweeping double probe measurements in an atmospheric pressure direct current vortex-stabilized plasma jet are reported (plasma conditions: 100 A discharge current, N{sub 2} gas flow rate of 25 Nl/min, thoriated tungsten rod-type cathode, copper anode with 5 mm inner diameter). The interpretation of the double probe characteristic was based on a generalization of the standard double floating probe formulae for non-uniform plasmas coupled to a non-equilibrium plasma composition model. Perturbations caused by the current to the probe together with collisional and thermal processes inside the probe perturbed region were taken into account. Radial values of the average electron and heavy particle temperatures as well as the electron density were obtained. The calculation of the temperature values did not require any specific assumption about a temperature relationship between different particle species. An electron temperature of 10 900 ± 900 K, a heavy particle temperature of 9300 ± 900 K, and an electron density of about 3.5 × 10{sup 22} m{sup −3} were found at the jet centre at 3.5 mm downstream from the torch exit. Large deviations from kinetic equilibrium were found toward the outer border of the plasma jet. These results showed good agreement with those previously reported by the authors by using a single probe technique. The calculations have shown that this method is particularly useful for studying spraying-type plasma torches operated at power levels of about 15 kW.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Methane activation using Kr and Xe in a dielectric barrier discharge reactor

Methane has interested many researchers as a possible new energy source, but the high stability of methane causes a bottleneck in methane activation, limiting its practical utilization. To determine how to effectively activate methane using non-thermal plasma, the conversion of methane is measured in a planar-type dielectric barrier discharge reactor using three different noble gases—Ar, Kr, and Xe—as additives. In addition to the methane conversion results at various applied voltages, the discharge characteristics such as electron temperature and electron density were calculated through zero-dimensional calculations. Moreover, the threshold energies of excitation and ionization were used to distinguish the dominant particle for activating methane between electrons, excited atoms, and ionized atoms. From the experiments and calculations, the selection of the additive noble gas is found to affect not only the conversion of methane but also the selectivity of product gases even under similar electron temperature and electron density conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron gas induced in SrTiO{sub 3}

This mini-review is dedicated to the 85th birthday of Prof. L.V. Keldysh, from whom we have learned so much. In this paper, we study the potential and electron density depth profiles in surface accumulation layers in crystals with a large and nonlinear dielectric response such as SrTiO{sub 3} (STO) in the cases of planar, spherical, and cylindrical geometries. The electron gas can be created by applying an induction D{sub 0} to the STO surface. We describe the lattice dielectric response of STO using the Landau–Ginzburg free energy expansion and employ the Thomas–Fermi (TF) approximation for the electron gas. For the planar geometry, we arrive at the electron density profile n(x) ∝ (x + d){sup –12/7}, where d ∝ D{sub 0}{sup –12/7}. We extend our results to overlapping electron gases in GTO/STO/GTO heterojunctions and electron gases created by spill-out from NSTO (heavily n-type doped STO) layers into STO. Generalization of our approach to a spherical donor cluster creating a big TF atom with electrons in STO brings us to the problem of supercharged nuclei. It is known that for an atom with a nuclear charge Ze where Z > 170, electrons collapse onto the nucleus, resulting in a net charge Zn < Z. Here, instead of relativistic physics, the collapse is caused by the nonlinear dielectric response. Electrons collapse into the charged spherical donor cluster with radius R when its total charge number Z exceeds the critical value Z{sub c} ≈ R/a, where a is the lattice constant. The net charge eZ{sub n} grows with Z until Z exceeds Z* ≈ (R/a){sup 9/7}. After this point, the charge number of the compact core Z{sub n} remains ≈ Z*, with the rest Z* electrons forming a sparse TF atom with it. We extend our studies of collapse to the case of long cylindrical clusters as well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of the N2 recombination rate coefficient in the ionosphere

Measurements of aeronomic parameters made by the Atmosphere Explorer-C satellite are used to determine the recombination rate coefficient of N2(+) in the ionosphere. The rate is found to increase significantly with decreasing electron density. Values obtained range from approximately 1.4 x 10 to the -7th to 3.8 x 10 to the -7th cu cm/sec. This variation is explained in a preliminary way in terms of an increase in the rate coefficient with vibrational excitation. Thus, high electron densities depopulate high vibrational levels reducing the effective recombination rate, whereas, low electron densities result in an enhancement in the population of high vibrational levels, thus, increasing the effective recombination rate.

Orsini, N.↗

Maximum Entropy Method and Charge Flipping, a Powerful Combination to Visualize the True Nature of Structural Disorder from in situ X-ray Powder Diffraction Data

In a systematic approach, the ability of the Maximum Entropy Method (MEM) to reconstruct the most probable electron density of highly disordered crystal structures from X-ray powder diffraction data was evaluated. As a case study, the ambient temperature crystal structures of disordered {alpha}-Rb{sub 2}[C{sub 2}O{sub 4}] and {alpha}-Rb{sub 2}[CO{sub 3}] and ordered {delta}-K{sub 2}[C{sub 2}O{sub 4}] were investigated in detail with the aim of revealing the 'true' nature of the apparent disorder. Different combinations of F (based on phased structure factors) and G constraints (based on structure-factor amplitudes) from different sources were applied in MEM calculations. In particular, a new combination of the MEM with the recently developed charge-flipping algorithm with histogram matching for powder diffraction data (pCF) was successfully introduced to avoid the inevitable bias of the phases of the structure-factor amplitudes by the Rietveld model. Completely ab initio electron-density distributions have been obtained with the MEM applied to a combination of structure-factor amplitudes from Le Bail fits with phases derived from pCF. All features of the crystal structures, in particular the disorder of the oxalate and carbonate anions, and the displacements of the cations, are clearly obtained. This approach bears the potential of a fast method of electron-density determination, even for highly disordered materials. All the MEM maps obtained in this work were compared with the MEM map derived from the best Rietveld refined model. In general, the phased observed structure factors obtained from Rietveld refinement (applying F and G constraints) were found to give the closest description of the experimental data and thus lead to the most accurate image of the actual disorder.

36 MATERIALS SCIENCE↗

Particle-in-cell simulations of multi-MeV pulsed X-ray induced air plasmas at low pressures

A full kinetic modelling of the charge particles dynamics generated upon the irradiation of an air-filled cavity by a multi-MeV pulsed x-ray is performed. From the calculated radiative source generated by the ASTERIX generator, we calculated the electromagnetic fields generated by x-ray induced air plasmas in a metallic cavity at different pressures. Simulations are carried out based on a Particle-In-Cell interpolation method which uses 3D Maxwell-Vlasov calculations of the constitutive charged species densities of air plasmas at different pressures at equilibrium. The resulting electromagnetic fields within the cavity are calculated for different electron densities up to 4 × 10{sup 10 }cm{sup −3}. For each air pressure, we show electronic plasma waves formation followed by Landau damping. As electron density increases, the calculations exhibit space-charged neutralization and return current formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗