Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “concentrations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Semiconductor point defect concentration profiles measured using coherent acoustic phonon waves

Coherent acoustic phonon interferometry is used to quantitatively measure depth-dependent point defect concentrations in semiconductor systems with a depth range of the order of tens of microns. Using time-resolved pump-probe techniques, the optical response of ion-beam irradiated GaAs crystals is analyzed as a function of defect concentration ranging over four orders of magnitude. Varying the ion dose quantitatively relates changes in the optical response to local defect concentrations. Thermal annealing is shown to reduce the effect on the optical response, indicating recovery of the crystal lattice through self-interstitial-vacancy recombination.

36 MATERIALS SCIENCE↗

Ion beam shaping of Au nanoparticles in silica: Particle size and concentration dependence

Irradiation with swift heavy ions of spherical Au nanoparticles confined within a silica matrix shapes them into prolate nanorods and nanowires whose principal axes are aligned along the beam direction. In the present paper, we investigate the role that is played by the initial nanoparticle size and concentration in this so-called ion-shaping mechanism. We have produced silica films wherein Au nanoparticles with average diameters of 15, 30, and 45 nm were embedded within a single plane and have irradiated these films at 300 K at normal incidence with 18, 25, and 54 MeV Ag ions. We demonstrate the existence of both threshold and saturation fluences for the elongation effects mentioned. The values of these critical fluences depend both on the ion energy and the initial nanoparticle size. Moreover, we show that 45 nm Au particles are not deformed when irradiated with 18 MeV Ag ions, such that this value corresponds to an energy threshold for the deformation process. As far as the influence of the nanoparticle concentration on the shaping characteristics is concerned, we have found that above the critical irradiation fluence, the deformation effect becomes very sensitive to the initial concentration of the nanoparticles.

36 MATERIALS SCIENCE↗

Studies on metal/n-GaAs Schottky barrier diodes: The effects of temperature and carrier concentrations

Metal/Semiconductor Schottky diodes were fabricated to study the effect of temperature and carrier concentrations on diode parameters, such as ideality factor and barrier heights. The diodes were formed on the epitaxial layers of metal organic chemical vapor deposition (MOCVD) grown n-GaAs with metals such as Al, Pd, and Zn-Pd deposited onto n-GaAs by thermal evaporation technique. Trimethyl gallium and AsH{sub 3} were used as Ga and As precursors, respectively, to grow GaAs on semi-insulating GaAs substrates at 600 deg. C and H{sub 2}S was used for n-type doping in a horizontal reactor atmospheric pressure MOCVD system. The Schottky diodes were characterized by forward bias current-voltage measurements in the temperature range 130-300 K and capacitance-voltage measurement at room temperature and diode parameters such as ideality factor and barrier height have been evaluated. It is found that the Schottky barrier height decreases with decrease in temperature while the ideality factor increases. It is also observed that the barrier height increases linearly with the applied forward bias voltage and the rate of change of barrier height with voltage increases for higher carrier concentration of the semiconductor. The carrier concentration of n-GaAs was chosen in the regime 1x10{sup 16}-8.2x10{sup 16} cm{sup -3} so that the depletion region extends inside the semiconductor and the diode can be used as a III-V photovoltaic device.

36 MATERIALS SCIENCE↗

Solution-processable polymer solar cells from a poly(3-hexylthiophene)/[6,6]-phenyl C{sub 61}-butyric acidmethyl ester concentration graded bilayers

Polymer photovoltaic (PV) device prepared with a vertical phase separation has intensified the research on the effectiveness of the concentration graded active layer. In this paper, a polymer PV device with a poly(3-hexylthiophene)/[6,6]-phenyl C{sub 61}-butyric acidmethyl ester (P3HT/PCBM) bilayers active film with a concentration gradient has been fabricated via solution process. The concentration variation has been confirmed by the Auger spectroscopy. The devices showed an enhanced photocurrent density and power conversion efficiency compared to those of the bulk heterojunction PV prepared under the same fabrication condition.

36 MATERIALS SCIENCE↗

Concentration dependence of the Er{sup 3+} visible and infrared luminescence in Y{sub 2-x}Er{sub x}O{sub 3} thin films on Si

Y{sub 2-x}Er{sub x}O{sub 3} thin films, with x varying between 0 and 0.72, have been successfully grown on crystalline silicon (c-Si) substrates by radio-frequency magnetron cosputtering of Y{sub 2}O{sub 3} and Er{sub 2}O{sub 3} targets. As-deposited films are polycrystalline, showing the body-centered cubic structure of Y{sub 2}O{sub 3}, and show only a slight lattice parameter contraction when x is increased, owing to the insertion of Er ions. All the films exhibit intense Er-related optical emission at room temperature both in the visible and infrared regions. By studying the optical properties for different excitation conditions and for different Er contents, all the mechanisms (i.e., cross relaxations, up-conversions, and energy transfers to impurities) responsible for the photoluminescence (PL) emission have been identified, and the existence of two different well-defined Er concentration regimes has been demonstrated. In the low concentration regime (x up to 0.05, Er-doped regime), the visible PL emission reaches its highest intensity, owing to the influence of up-conversions, thus giving the possibility of using Y{sub 2-x}Er{sub x}O{sub 3} films as an up-converting layer in the rear of silicon solar cells. However, most of the excited Er ions populate the first two excited levels {sup 4}I{sub 11/2} and {sup 4}I{sub 13/2}, and above a certain excitation flux a population inversion condition between the former and the latter is achieved, opening the route for the realization of amplifiers at 2.75 mum. Instead, in the high concentration regime (Er-compound regime), an increase in the nonradiative decay rates is observed, owing to the occurrence of cross relaxations or energy transfers to impurities. As a consequence, the PL emission at 1.54 mum becomes the most intense, thus determining possible applications for Y{sub 2-x}Er{sub x}O{sub 3} as an infrared emitting material.

36 MATERIALS SCIENCE↗

Critical oxygen concentration in hydrogenated amorphous silicon solar cells dependent on the contamination source

For hydrogenated amorphous silicon (a-Si:H) solar cells, the critical concentration of a given impurity defines the lowest concentration which causes a decay of solar cell efficiency. Values of 2-5x10{sup 19} cm{sup -3} are commonly found for the critical oxygen concentration (C{sub O}{sup crit}) of a-Si:H. Here we report a dependence of C{sub O}{sup crit} on the contamination source. For state-of-the-art a-Si:H solar cells prepared at the same plasma deposition conditions, we obtain with a (controllable) chamber wall leak C{sub O}{sup crit} approx2x10{sup 19} cm{sup -3} while for a leak in the gas supply line a higher C{sub O}{sup crit} of approx2x10{sup 20} cm{sup -3} is measured. No such dependence is observed for nitrogen.

36 MATERIALS SCIENCE↗

Theoretical study of the light scattering from two alternating concentric double silica-gold nanoshell

The cross section of two alternating concentric double silica-gold nanoshell (DSGNS) is obtained as a function of wavelength. Numerical calculations show that two alternating concentric DSGNSs display two separated scattering peaks that the intensity and position of the scattering peaks depend on two gold shells thicknesses and silica layer thickness between them. By varying thicknesses of the layers of the gold shells, two alternating concentric DSGNS can be designed with the scattering peak from the visible to infrared regions of the spectrum.

36 MATERIALS SCIENCE↗

Performance of a High-Concentration Erbium-Doped Fiber Amplifier with 100 nm Amplification Bandwidth

Increasing demand for higher bandwidth has driven the need for higher Wavelength Division Multiplexing (WDM) channels. One of the requirements to achieve this is a broadband amplifier. This paper reports the performance of a broadband, compact, high-concentration and silica-based erbium-doped fiber amplifier. The amplifier optimized to a 2.15 m long erbium-doped fiber with erbium ion concentration of 2000 ppm. The gain spectrum of the amplifier has a measured amplification bandwidth of 100 nm using a 980 nm laser diode with power of 150 mW. This silica-based EDFA shows lower noise figure, higher gain and wider bandwidth in shorter wavelengths compared to Bismuth-based EDFA with higher erbium ion concentration of 3250 ppm at equivalent EDF length. The silica-based EDF shows peak gain at 22 dB and amplification bandwidth between 1520 nm and 1620 nm. The lowest noise figure is 5 dB. The gain is further improved with the implementation of enhanced EDFA configurations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Using Photon Activation Analysis To Determine Concentrations Of Unknown Components In Reference Materials

Using certified multi-element reference materials for instrumental analyses one frequently is confronted with the embarrassing fact that the concentration of some desired elements are not given in the respective certificate, nonetheless are detectable, e.g. by photon activation analysis (PAA). However, these elements might be determinable with sufficient quality of the results using scaling parameters and the well-known quantities of a reference element within the reference material itself. Scaling parameters include: activation threshold energy, Giant Dipole Resonance (GDR) peak and endpoint energy of the bremsstrahlung continuum; integrated photo-nuclear cross sections for the isotopes of the reference element; bremsstrahlung continuum integral; target thickness; photon flux density. Photo-nuclear cross sections from the unreferenced elements must be known, too. With these quantities, the integral was obtained for both the known and unknown elements resulting in an inference of the concentration of the unreported element based upon the reported value, thus also the concentration of the unreferenced element in the reference material. A similar method to determine elements using the basic nuclear and experimental data has been developed for thermal neutron activation analysis some time ago (k{sub 0} Method).

07 ISOTOPE AND RADIATION SOURCES↗

Contactless monitoring of Ge content and B concentration in ultrathin single and double layer Si{sub 1-x}Ge{sub x} epitaxial films using multiwavelength micro-Raman spectroscopy

Non-contact monitoring of Ge content and B concentration in single and double Si{sub 1-x}Ge{sub x} epitaxial layers on Si(100) device wafers was attempted using high-resolution, multiwavelength micro-Raman spectroscopy. The Ge content and B concentration determined by secondary ion mass spectroscopy (SIMS) depth profiling showed very strong correlation with the position and full-width-at-half-maximum of the Si-Si peak from the Si{sub 1-x}Ge{sub x} epitaxial layers as determined by Raman measurements. High resolution X-ray diffraction (HRXRD) characterization was done for all wafers to determine Ge and B sensitivity and form comparisons with Raman and SIMS analysis. The non-destructive, in-line monitoring of Ge content and B concentration of single and double Si{sub 1-x}Ge{sub x} epitaxial layers with thickness ranging from 5 {approx} 120 nm, on small area monitoring pads, was successfully demonstrated by multiwavelength micro-Raman spectroscopy during epitaxial process optimization, material property verification, and quality control applications.

36 MATERIALS SCIENCE↗

Ultra-low resistance ohmic contacts to GaN with high Si doping concentrations grown by molecular beam epitaxy

Ti/Al/Ni/Au ohmic contacts were formed on heavily doped n{sup +} metal-polar GaN samples with various Si doping concentrations grown by molecular beam epitaxy. The contact resistivity (R{sub C}) and sheet resistance (R{sub sh}) as a function of corresponding GaN free carrier concentration (n) were measured. Very low R{sub C} values (<0.09 {Omega} mm) were obtained, with a minimum R{sub C} of 0.035 {Omega} mm on a sample with a room temperature carrier concentration of {approx}5 Multiplication-Sign 10{sup 19} cm{sup -3}. Based on the systematic study, the role of R{sub C} and R{sub sh} is discussed in the context of regrown n{sup +} GaN ohmic contacts for GaN based high electron mobility transistors.

36 MATERIALS SCIENCE↗

Role of native defects in nitrogen flux dependent carrier concentration of InN films grown by molecular beam epitaxy

We address the carrier concentration, strain, and bandgap issue of InN films grown on c-sapphire at different N-flux by molecular beam epitaxy using x-ray diffraction and x-ray photoelectron spectroscopy. We demonstrate that the strain in InN films arises due to point defects like nitrogen interstitials and nitrogen antisites. We report minimal biaxial strain due to relaxed growth morphology and a minimal hydrostatic strain arising due to interstitial nitrogen atoms being partially compensated by nitrogen antisites. We find that the variation in absorption edge can be attributed to defect induced carrier concentration and that nitrogen interstitials and nitrogen antisites act as donors that yield the respective absorption edge and Moss-Burstein shift. Our studies are a step towards the ability to form low carrier concentration strain-relaxed films and to determine the intrinsic band gap value for this technologically important material.

36 MATERIALS SCIENCE↗

Effect of interfacial lattice mismatch on bulk carrier concentration and band gap of InN

The issue of ambiguous values of the band gap (0.6 to 2 eV) of InN thin film in literature has been addressed by a careful experiment. We have grown wurtzite InN films by PA-MBE simultaneously on differently modified c-plane sapphire substrates and characterized by complementary structural and chemical probes. Our studies discount Mie resonances caused by metallic In segregation at grain boundaries as the reason for low band gap values ( Almost-Equal-To 0.6 eV) and also the formation of Indium oxides and oxynitrides as the cause for high band gap value ( Almost-Equal-To 2.0 eV). It is observed that polycrystallinity arising from azimuthal miss-orientation of c-oriented wurtzite InN crystals increases the carrier concentration and the band gap values. We have reviewed the band gap, carrier concentration, and effective mass of InN in literature and our own measurements, which show that the Moss-Burstein relation with a non-parabolic conduction band accounts for the observed variation of band gap with carrier concentration.

36 MATERIALS SCIENCE↗

Optical characterization of free electron concentration in heteroepitaxial InN layers using Fourier transform infrared spectroscopy and a 2 Multiplication-Sign 2 transfer-matrix algebra

Fourier Transform Infrared (FTIR) reflectance spectroscopy has been implemented as a non-destructive, non-invasive, tool for the optical characterization of a set of c-plane InN single heteroepitaxial layers spanning a wide range of thicknesses (30-2000 nm). The c-plane (0001) InN epilayers were grown by plasma-assisted molecular beam epitaxy (PAMBE) on GaN(0001) buffer layers which had been grown on Al{sub 2}O{sub 3}(0001) substrates. It is shown that for arbitrary multilayers with homogeneous anisotropic layers having their principal axes coincident with the laboratory coordinates, a 2 Multiplication-Sign 2 matrix algebra based on a general transfer-matrix method (GTMM) is adequate to interpret their optical response. Analysis of optical reflectance in the far and mid infrared spectral range has been found capable to discriminate between the bulk, the surface and interface contributions of free carriers in the InN epilayers revealing the existence of electron accumulation layers with carrier concentrations in mid 10{sup 19} cm{sup -3} at both the InN surface and the InN/GaN interface. The spectra could be fitted with a three-layer model, determining the different electron concentration and mobility values of the bulk and of the surface and the interface electron accumulation layers in the InN films. The variation of these values with increasing InN thickness could be also sensitively detected by the optical measurements. The comparison between the optically determined drift mobility and the Hall mobility of the thickest sample reveals a value of r{sub H} = 1.49 for the Hall factor of InN at a carrier concentration of 1.11 Multiplication-Sign 10{sup 19} cm{sup -3} at 300 Degree-Sign {Kappa}.

36 MATERIALS SCIENCE↗

Room temperature synthesis of Mn{sup 2+} doped ZnS d-dots and observation of tunable dual emission: Effects of doping concentration, temperature, and ultraviolet light illumination

Mn{sup 2+} doped (0-50.0 molar %) ZnS d-dots have been synthesized in water medium by using an environment friendly low cost chemical technique. Tunable dual emission in UV and yellow-orange regions is achieved by tailoring the Mn{sup 2+} doping concentration in the host ZnS nanocrystal. The optimum doping concentration for achieving efficient photoluminescence (PL) emission is determined to be {approx}1.10 (at. %) corresponding to 40.0 (molar %) of Mn{sup 2+} doping concentration used during synthesis. The mechanism of charge transfer from the host to the dopant leading to the intensity modulated tunable (594-610 nm) yellow-orange PL emission is straightforwardly understood as no capping agent is used. The temperature dependent PL emission measurements are carried out, viz., in 1.10 at. % Mn{sup 2+} doped sample and the experimental results are explained by using a theoretical PL emission model. It is found that the ratio of non-radiative to radiative recombination rates is temperature dependent and this phenomenon has not been reported, so far, in Mn{sup 2+} doped ZnS system. The colour tuning of the emitted light from the samples are evident from the calculated chromaticity coordinates. UV light irradiation for 150 min in 40.0 (molar %) Mn{sup 2+} doped sample shows an enhancement of 33% in PL emission intensity.

36 MATERIALS SCIENCE↗

Growth mechanism of photoreduced silver nanostructures on periodically proton exchanged lithium niobate: Time and concentration dependence

Photodeposition of metallic nanostructures onto ferroelectric surfaces, which have been chemically patterned using a proton exchange process, has recently been demonstrated. By varying the molar concentration of the AgNO{sub 3} solution and the illumination time, one can determine the initial nucleation sites, control the rate of nucleation and the height of silver nanostructures formed, and study the mechanisms by which these processes occurs. The nanoparticles are found to deposit preferentially in the boundary between ferroelectric and proton exchanged regions, in an area proton exchanged via lateral diffusion under the masking layer used for chemical patterning, consistent with our previous results. Using a short illumination time (3 min), we are able to determine that the initial nucleation of the silver nanostructure, having a width of 0.17 {+-} 0.02 {mu}m and a height of 1.61 {+-} 0.98 nm, occurs near the edge of the reactive ion etched area within this lateral diffusion region. Over longer illumination times (15 min), we find that the silver deposition has spread to a width of 1.29 {+-} 0.06 {mu}m, extending across the entire lateral diffusion region. We report that at a high molar concentration of AgNO{sub 3} (10{sup -2} M), the amount of silver deposition for 5 min UV illumination is greater (2.88 {+-} 0.58 nm) compared to that at low (10{sup -4} M) concentrations (0.78 {+-} 0.35 nm), however, this is not the case for longer time periods. With increasing illumination time (15 min), experiments at 10{sup -4} M had greater overall deposition, 6.90 {+-} 1.52 nm, compared to 4.50 {+-} 0.76 nm at 10{sup -2} M. For longer exposure times (30 min) at 10{sup -2} M, the nanostructure height is 4.72 {+-} 0.59 nm, suggesting a saturation in the nanostructure height. The results are discussed in terms of the electric double layer that forms at the crystal surface. There is an order of magnitude difference between the Debye lengths for 10{sup -2} and 10{sup -4} M solutions, i.e., 3.04 vs. 30.40 nm, which suggests the Debye length plays a role in the availability of Ag{sup +} ions at the surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Periodically multilayered planar optical concentrator for photovoltaic solar cells

A planar optical concentrator comprising a periodic multilayered isotropic dielectric material backed by a metallic surface-relief grating was theoretically examined for silicon photovoltaics. The concentrator was optimized using a differential evolution algorithm for solar-spectrum-integrated power-flux density. Further optimization was carried out for tolerance to variations in the incidence angle, spatial dimensions, and dielectric properties. The average electron-hole pair density in a silicon solar cell can be doubled, and the material costs substantially diminished by this concentrator, whose efficacy is due to the excitation of waveguide modes and multiple surface-plasmon-polariton waves in a broad spectral regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fluorescence resonance energy transfer measured by spatial photon migration in CdSe-ZnS quantum dots colloidal systems as a function of concentration

The study of the spatial photon migration as a function of the concentration brings into attention the problem of the energy transfer in quantum dot embedded systems. By measuring the photon propagation and its spatial dependence, it is possible to understand the whole dynamics in a quantum dot system, and also improve their concentration dependence to maximize energy propagation due to radiative and non-radiative processes. In this work, a confocal microscope was adapted to scan the spatial distribution of photoluminescence from CdSe-ZnS core-shell quantum dots in colloidal solutions. The energy migration between the quantum dots was monitored by the direct measurement of the photon diffusion length, according to the diffusion theory. We observed that the photon migration length decreases by increasing the quantum dot concentration, this kind of behavior has been regarded as a signature of Förster resonance energy transfer in the system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗