Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “computation time”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Determining mode excitations of vacuum electronics devices via three-dimensional simulations using the SOS code

The SOS code is used to compute the resonance modes (frequency-domain information) of sample devices and separately to compute the transient behavior of the same devices. A code, DOT, is created to compute appropriate dot products of the time-domain and frequency-domain results. The transient behavior of individual modes in the device is then plotted. Modes in a coupled-cavity traveling-wave tube (CCTWT) section excited beam in separate simulations are analyzed. Mode energy vs. time and mode phase vs. time are computed and it is determined whether the transient waves are forward or backward waves for each case. Finally, the hot-test mode frequencies of the CCTWT section are computed.

Warren, Gary↗
NASA NTRS1991

Hypersonic Research Vehicle (HRV) real-time flight test support feasibility and requirements study. Part 1: Real-time flight experiment support

The results are presented of a study to identify potential real time remote computational applications to support monitoring HRV flight test experiments along with definitions of preliminary requirements. A major expansion of the support capability available at Ames-Dryden was considered. The focus is on the use of extensive computation and data bases together with real time flight data to generate and present high level information to those monitoring the flight. Six examples were considered: (1) boundary layer transition location; (2) shock wave position estimation; (3) performance estimation; (4) surface temperature estimation; (5) critical structural stress estimation; and (6) stability estimation.

Rediess, Herman A.↗
NASA NTRS1992

Computational/experimental basis for conducting alkane droplet combustion experiments on space-based-platforms

An analysis is conducted of the requirement for the conduct of spherically symmetric droplet-combustion experiments on space platforms, on the basis of a novel time-dependent computational droplet combustion model that allows the time- and temperature-dependent transport characteristics to be incorporated. While at low oxygen indices the droplet burning extinction becomes a strong function of oxygen index, it becomes a weaker function at higher oxygen index values. The oxygen index that separates these two ranges are dependent on the diluent, being higher for He and lower for N.

Choi, Mun Y.↗
NASA NTRS1993

Hypersonic flow past open cavities

The hypersonic flow over a cavity is investigated. The time-dependent compressible Navier-Stokes equations, in terms of mass averaged variables, are numerically solved. An implicit algorithm, with a subiteration procedure to recover time-accuracy, is used to perform the time-accurate computations. The objective of the study is to investigate the effects of Reynolds number and cavity dimensions. The comparison of the computations with available experimental data, in terms of time mean static pressure, heat transfer, and Mach number show good agreement. In the computations large vortex structures, which adversely affect the cavity flow characteristics, are observed at the rear of the cavity. A self-sustained oscillatory motion occurs within the cavity over a range of Reynolds number and cavity dimensions. The frequency spectra of the oscillations show good agreement with a modified semi-empirical relation.

Morgenstern, Alagacyr, Jr.↗
NASA NTRS1994

Hypersonic flow past open cavities

The hypersonic flow over a cavity is investigated. The time-dependent compressible Navier-Stokes equations are numerically solved. An implicit algorithm, with a subiteration procedure to recover time accuracy, is used to perform the time-accurate computations. The objective of the study is to investigate the effects of Reynolds number and cavity dimensions. The comparsion of the computations with available experimental data, in terms of time mean static pressure, heat transfer, and Mach number, show good agreement. In the computations large vortex structures, which adversely affect the cavity flow characteristics, are observed at the rear of the cavity. A self-sustained oscillatory motion occurs within the cavity over a range of Reynolds number and cavity dimensions. The frequency spectra of the oscillations show good agreement with a modified semiempirical relation.

Morgenstern, Algacyr, Jr.↗
NASA NTRS1989

An approach to experimental evaluation of real-time fault-tolerant distributed computing schemes

A testbed-based approach to the evaluation of fault-tolerant distributed computing schemes is discussed. The approach is based on experimental incorporation of system structuring and design techniques into real-time distributed-computing testbeds centered around tightly coupled microcomputer networks. The effectiveness of this approach has been experimentally confirmed. Primary advantages of this approach include the accuracy of the timing and logical-complexity data and the degree of assurance of the practical effectiveness of the scheme evaluated. Various design issues encountered in the course of establishing the network testbed facilities are discussed, along with their augmentation to support some experiments. The shortcomings of the testbeds are also discussed together with the desired extensions of the testbeds.

Kim, K. H.↗
NASA NTRS1987

Numerical arc segmentation algorithm for a radio conference-NASARC (version 2.0) technical manual

The information contained in the NASARC (Version 2.0) Technical Manual (NASA TM-100160) and NASARC (Version 2.0) User's Manual (NASA TM-100161) relates to the state of NASARC software development through October 16, 1987. The Technical Manual describes the Numerical Arc Segmentation Algorithm for a Radio Conference (NASARC) concept and the algorithms used to implement the concept. The User's Manual provides information on computer system considerations, installation instructions, description of input files, and program operating instructions. Significant revisions have been incorporated in the Version 2.0 software. These revisions have enhanced the modeling capabilities of the NASARC procedure while greatly reducing the computer run time and memory requirements. Array dimensions within the software have been structured to fit within the currently available 6-megabyte memory capacity of the International Frequency Registration Board (IFRB) computer facility. A piecewise approach to predetermined arc generation in NASARC (Version 2.0) allows worldwide scenarios to be accommodated within these memory constraints while at the same time effecting an overall reduction in computer run time.

Whyte, Wayne A., Jr.↗
NASA NTRS1978

Comparative study of the convergence rates of two numerical techniques

The paper examines the applicability of the three-step Stetter (1968) method to the problem of hypersonic viscous flow over a blunt axisymmetric body used for planetary entry probes at zero angle of attack. The flow-field results using the two-step finite-difference MacCormack (1969) method are reported by Kumar and Graves (1977). Only the computational efficiency of Stetter's method is compared with that of MacCormack's in terms of the iterative time steps and computing time required for the steady-state solution. Advantages of Stetter's method over MacCormack's are established.

Kumar, A.↗
NASA NTRS1974

Real-time simulation of the TF30-P-3 turbofan engine using a hybrid computer

A real-time, hybrid-computer simulation of the TF30-P-3 turbofan engine was developed. The simulation was primarily analog in nature but used the digital portion of the hybrid computer to perform bivariate function generation associated with the performance of the engine's rotating components. FORTRAN listings and analog patching diagrams are provided. The hybrid simulation was controlled by a digital computer programmed to simulate the engine's standard hydromechanical control. Both steady-state and dynamic data obtained from the digitally controlled engine simulation are presented. Hybrid simulation data are compared with data obtained from a digital simulation provided by the engine manufacturer. The comparisons indicate that the real-time hybrid simulation adequately matches the baseline digital simulation.

Szuch, J. R.↗
NASA NTRS1998

3D Navier-Stokes Time Accurate Solutions Using Multipartitioning Parallel Computation Methodology

A parallel CFD code solving 3D time accurate Navier-Stokes equations with multipartitioning parallel Methodology is being developed in collaboration with Ohio State University within the Air Vehicle Directorate, at Wright Patterson Air Force Base. The advantage of the multipartitioning parallel method is that the domain decomposition will not introduce domain boundaries for the implicit operators. A ring structure data communication is employed so that the implicit time accurate method can be implemented for multi-processors with the same accuracy as for the single processor. No sub-iteration is needed at the domain boundaries. The code has been validated for some typical unsteady flows, which include Coutte Flow, flow passing a cylinder. The code now is being employed for a large scale time accurate wall jet transient flow computation. 'ne preliminary results are promising. The mesh has been refined to capture more details of the flow field. The mesh refinement computation is in progress and would be difficult to successfully implement without the parallel computation techniques used. A modified version of the code with more efficient inversion of the diagonalized block matrix is currently being tested.

Zha, Ge-Cheng↗
NASA NTRS2002

Gust Acoustics Computation with a Space-Time CE/SE Parallel 3D Solver

The benchmark Problem 2 in Category 3 of the Third Computational Aero-Acoustics (CAA) Workshop is solved using the space-time conservation element and solution element (CE/SE) method. This problem concerns the unsteady response of an isolated finite-span swept flat-plate airfoil bounded by two parallel walls to an incident gust. The acoustic field generated by the interaction of the gust with the flat-plate airfoil is computed by solving the 3D (three-dimensional) Euler equations in the time domain using a parallel version of a 3D CE/SE solver. The effect of the gust orientation on the far-field directivity is studied. Numerical solutions are presented and compared with analytical solutions, showing a reasonable agreement.

Wang, X. Y.↗
NASA NTRS1976

A self-documenting source-independent data format for computer processing of tensor time series

The UCLA Space Science Group has developed a fixed format intermediate data set called a block data set, which is designed to hold multiple segments of multicomponent sampled data series. The format is sufficiently general so that tensor functions of one or more independent variables can be stored in the form of virtual data. This makes it possible for the unit data records of the block data set to be arrays of a single dependent variable rather than discrete samples. The format is self-documenting with parameter, label and header records completely characterizing the contents of the file. The block data set has been applied to the filing of satellite data (of ATS-6 among others).

Mcpherron, R. L.↗
NASA NTRS1988

Advanced flight computers for planetary exploration

Research concerning flight computers for use on interplanetary probes is reviewed. The history of these computers from the Viking mission to the present is outlined. The differences between ground commercial computers and computers for planetary exploration are listed. The development of a computer for the Mariner Mark II comet rendezvous asteroid flyby mission is described. Various aspects of recently developed computer systems are examined, including the Max real time, embedded computer, a hypercube distributed supercomputer, a SAR data processor, a processor for the High Resolution IR Imaging Spectrometer, and a robotic vision multiresolution pyramid machine for processsing images obtained by a Mars Rover.

Stephenson, R. Rhoads↗
NASA NTRS1989

RenderMan design principles

The two worlds of interactive graphics and realistic graphics have remained separate. Fast graphics hardware runs simple algorithms and generates simple looking images. Photorealistic image synthesis software runs slowly on large expensive computers. The time has come for these two branches of computer graphics to merge. The speed and expense of graphics hardware is no longer the barrier to the wide acceptance of photorealism. There is every reason to believe that high quality image synthesis will become a standard capability of every graphics machine, from superworkstation to personal computer. The significant barrier has been the lack of a common language, an agreed-upon set of terms and conditions, for 3-D modeling systems to talk to 3-D rendering systems for computing an accurate rendition of that scene. Pixar has introduced RenderMan to serve as that common language. RenderMan, specifically the extensibility it offers in shading calculations, is discussed.

Apodaca, Tony↗
NASA NTRS2003

On the Computation of Space-Time Correlations by Large-Eddy Simulation

Numerical comparisons in decaying isotropic turbulence suggest that there exist discrepancies in time correlations evaluated by DNS and LES using eddy-viscosity-type SGS models. This is consistent with the previous observations in forced isotropic turbulence. Therefore, forcing is not the main cause of the discrepancies. Comparisons among different SGS models in the LES also indicate that the model choice affects the time correlations in the LES. The multi-scale LES method using the dynamic Smagorinsky model on the small scale equation is the most accurate of the all models, the classic Smagorinsky model is the least accurate and the dynamic Smagorinsky model and spectral eddy viscosity model give intermediate results with small differences. The generalized sweeping hypothesis implies that time correlations in decaying isotropic turbulence are mainly determined by the instantaneous energy spectra and sweeping velocities. The analysis based on the sweeping hypothesis explains the discrepancies in our numerical simulations: the LES overpredicts the decorrelation time scales because the sweeping velocities are smaller than the DNS values, and underpredicts the magnitudes of time correlations because the energy spectrum levels are lower than the DNS ones. Since the sweeping velocity is determined by the energy spectra, one concludes that an accurate prediction of the instantaneous energy spectra guarantees the accuracy of time correlations. An analytical expression of sound power spectra based on Lighthill's theory and the quasi-normal closure assumption suggests that the sound power spectra are sensitive to errors in time correlations. Small errors in time correlations can cause significant errors in the sound power spectra, which exhibit a sizable drop at moderate to high frequencies accompanied by a shift of the peaks to lower frequencies. Based on the above analysis, two possible ways to improve the acoustic power spectrum predictions can be considered. The first is to construct better SGS models to improve the LES accuracy for time correlations. The second is to remedy the temporal statistics of the Lighthill stress tensor in order to "recover" the contribution from the unresolved scales in LES to time correlations.

He, Guo-Wei↗
NASA NTRS2009

Minimizing Input-to-Output Latency in Virtual Environment

A method and apparatus were developed to minimize latency (time delay ) in virtual environment (VE) and other discrete- time computer-base d systems that require real-time display in response to sensor input s. Latency in such systems is due to the sum of the finite time requi red for information processing and communication within and between sensors, software, and displays.

Adelstein, Bernard D.↗