Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cascade”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Effects of film injection angle on turbine vane cooling

Film ejection from discrete holes in the suction surface of a turbine vane was studied for hole axes (1) slanted 30 deg to the surface in the streamwise direction and (2) slanted 30 deg to the surface and 45 deg from the streamwise direction toward the hub. The holes were near the throat area in a five-row staggered array with 8-diameter spacing. Mass flux ratios were as high as 1.2. The data were obtained in an annular sector cascade at conditions where both the ratio of the boundary layer momentum thickness-to-hole diameter and the momentum thickness Reynolds number were typical of an advanced turbofan engine at both takeoff and cruise. Wall temperatures were measured downstream of each of the rows of holes. Results of this study are expressed as a comparison of cooling effectiveness between the in-line angle injection and the compound-angle injection as a function of mass flux ratio. These heat transfer results are also compared with the results of a referenced flow visualization study. Also included is a closed-form analytical solution for temperature within the film cooled wall.

Gauntner, J. W.↗
NASA NTRS1978

Perturbation solutions for transonic flow on the blade-to-blade surface of compressor blade rows

A preliminary investigation was conducted to establish the theoretical basis of perturbation techniques with the objective of minimizing computational requirements associated with parametric studies of transonic flows in turbomachines. The theoretical analysis involved the development of perturbation methods for determining first order changes in the flow solution due to variations of one or more geometrical or flow parameters. The formulation is primarily directed toward transonic flows on the blade to blade surface of a single blade row compressor. Two different perturbation approaches were identified and studied. Applications and results of these methods for various perturbations are presented for selected two dimensional transonic cascade flows to illustrate the advantages and disadvantages of each technique. Additionally, it was found that, for flows with shock waves, proper account of shock displacement was crucial.

Stahara, S. S.↗
NASA NTRS1978

Bayesian classification in a time-varying environment

The problem of classifying a pattern based on multiple observation made in a time-varying environment is analyzed. The identity of the pattern may itself change. A Bayesian solution is derived, after which the conditions of the physical situation are invoked to produce a cascade classifier model. Experimental results based on remote sensing data demonstrate the effectiveness of the classifier.

Swain, P. H.↗
NASA NTRS1978

Airfoil profile in a nonuniform flow

A theory of airfoil section past two dimensional nonuniform flow is developed. The theory is based on representation of airfoil section by vortex and source distributions and it can be used for calculation of aircraft wings in homogeneous and inhomogeneous flow, as well as for calculation of straight and radial blade and vane-cascades.

Polasek, J.↗
NASA NTRS1978

Three-dimensional effects on pure tone fan noise due to inflow distortion

Two dimensional, quasi three dimensional and three dimensional theories for the prediction of pure tone fan noise due to the interaction of inflow distortion with a subsonic annular blade row were studied with the aid of an unsteady three dimensional lifting surface theory. The effects of compact and noncompact source distributions on pure tone fan noise in an annular cascade were investigated. Numerical results show that the strip theory and quasi three-dimensional theory are reasonably adequate for fan noise prediction. The quasi three-dimensional method is more accurate for acoustic power and model structure prediction with an acoustic power estimation error of about plus or minus 2db.

Kobayashi, H.↗
NASA NTRS1978

End-wall boundary layer prediction for axial compressors

An integral boundary layer procedure was developed for the computation of viscous and secondary flows along the annulus walls of an axial compressor. The procedure is an outgrowth and extension of the pitch-averaged methods of Mellor and Horlock. In the present work secondary flow theory is used to develop approximations for the velocity profiles inside a rotating blade row and for the blade force deficit terms in the momentum integral equations. The computer code based on this procedure was iteratively coupled to a quasi-one-dimensional model for the external inviscid flow. Computed results are compared with measurements in a compressor cascade.

Sockol, P. M.↗
NASA NTRS1978

Modelling, analyses and design of switching converters

A state-space averaging method for modelling switching dc-to-dc converters for both continuous and discontinuous conduction mode is developed. In each case the starting point is the unified state-space representation, and the end result is a complete linear circuit model, for each conduction mode, which correctly represents all essential features, namely, the input, output, and transfer properties (static dc as well as dynamic ac small-signal). While the method is generally applicable to any switching converter, it is extensively illustrated for the three common power stages (buck, boost, and buck-boost). The results for these converters are then easily tabulated owing to the fixed equivalent circuit topology of their canonical circuit model. The insights that emerge from the general state-space modelling approach lead to the design of new converter topologies through the study of generic properties of the cascade connection of basic buck and boost converters.

Cuk, S. M.↗
NASA NTRS1978

Logarithmic circuit with wide dynamic range

A circuit deriving an output voltage that is proportional to the logarithm of a dc input voltage susceptible to wide variations in amplitude includes a constant current source which forward biases a diode so that the diode operates in the exponential portion of its voltage versus current characteristic, above its saturation current. The constant current source includes first and second, cascaded feedback, dc operational amplifiers connected in negative feedback circuit. An input terminal of the first amplifier is responsive to the input voltage. A circuit shunting the first amplifier output terminal includes a resistor in series with the diode. The voltage across the resistor is sensed at the input of the second dc operational feedback amplifier. The current flowing through the resistor is proportional to the input voltage over the wide range of variations in amplitude of the input voltage.

Wiley, P. H.↗
NASA NTRS1978

An analysis of the multiple model adaptive control algorithm

Qualitative and quantitative aspects of the multiple model adaptive control method are detailed. The method represents a cascade of something which resembles a maximum a posteriori probability identifier (basically a bank of Kalman filters) and a bank of linear quadratic regulators. Major qualitative properties of the MMAC method are examined and principle reasons for unacceptable behavior are explored.

Greene, C. S.↗
NASA NTRS1977

Calculation of transonic potential flowfields about complex, three-dimensional configurations

Methods for extending iterative, finite-difference calculations of transonic potential flowfields to complex three-dimensional configurations are discussed. One particularly attractive approach is to use relatively simple conformal mappings in combination with shearing transformations to generate computational domains that are nearly-conformally mapped from the physical space in one family of coordinate surfaces, and which map the complex boundaries to grid surfaces. The application of such a method to a general wing-body combination or to a multi-bladed fan is discussed. A transformation to map the wing-fuselage or fan-hub combination to a convenient computational domain is proposed. The transformation is useful in its own right for treating the two-dimensional problems of flow past a profile in a wind tunnel or through a cascade. Some results of preliminary calculations are presented.

Caughey, D. A.↗
NASA NTRS1977

Perturbation solutions for blade-to-blade surfaces of a transonic compressor

The paper describes a perturbation method for turbomachinery calculations, particularly where it is necessary to carry out a number of calculations for closely-related flows such as are needed in a parametric study. The method is applied for solving a model problem involving blade-to-blade surfaces of a transonic compressor. Basically, the method makes use of a previously calculated base solution to determine first-order changes in the flow field due to variations in one or more of a variety of geometrical or flow field parameters. The fundamental assumption associated with the perturbation solution is that the magnitude of the deviations from the base solution lies within the range of a linear perturbation analysis. Comparisons are made for results obtained, by varying the thickness ratio of an unstaggered nonlifting cascade composed of biconvex profiles in a flow with an oncoming freestream Mach number of 0.60.

Stahara, S. S.↗
NASA NTRS1978

Vibrational excitation of H2 in intense ultraviolet fluxes

The vibrational excitation of H2 in intense ultraviolet radiation fields is studied. The radiative cascade through bound levels of the ground electronic state, following absorption of Lyman- and Werner-band photons, is modified to include effects of 'multiple pumping' and direct photodissociation from the high vibrational levels. Although the column densities in the excited vibrational levels produced by UV pumping appear too low to explain the recently observed Orion quadrupole emission lines, it is suggested that the far-red lines in the (3-0) and (4-0) bands, produced by UV pumping from O stars near dense molecular clouds, may be detectable.

Shull, J. M.↗
NASA NTRS1978

The Wiener-Hermite expansion applied to decaying isotropic turbulence using a renormalized time-dependent base

The problem of decaying isotropic turbulence has been studied using a Wiener-Hermite expansion with a renormalized time-dependent base. The theory is largely deductive and uses no modeling approximations. It has been found that many properties of large-Reynolds-number turbulence can be calculated (at least for moderate time) using the moving-base expansion alone. Such properties found are the spectrum shape in the dissipation range, the Kolmogorov constant, and the energy cascade in the inertial subrange. Furthermore, by using a renormalization scheme, it is possible to extend the calculation to larger times and to initial conditions significantly different from the equilibrium form. If the initial spectrum is the Kolmogorov spectrum perturbed with a spike or dip in the inertial subrange, the process proceeds to eliminate the perturbation and relax to the preferred spectrum shape. The turbulence decays with the proper dissipation rate, and several other properties are found to agree with measured data. The theory is also used to calculate the energy transfer and the flatness factor of turbulence.

Hogge, H. D.↗
NASA NTRS1978

Estimation and filter stability of stochastic delay systems

Linear and nonlinear filtering for stochastic delay systems are studied. A representation theorem for conditional moment functionals is obtained, which, in turn, is used to derive stochastic differential equations describing the optimal linear or nonlinear filter. A complete characterization of the optimal filter is given for linear systems with Gaussian noise. Stability of the optimal filter is studied in the case where there are no delays in the observations. Using the duality between linear filtering and control, asymptotic stability of the optimal filter is proved. Finally, the cascade of the optimal filter and the deterministic optimal quadratic control system is shown to be asymptotically stable as well.

Kwong, R. H.↗
NASA NTRS1978

Three-dimensional effects on pure tone fan noise due to inflow distortion

A theoretical analysis of pure tone fan noise generated by inflow distortion-rotor interaction is carried out with the aid of the three-dimensional unsteady lifting surface theory developed by Namba (1977, 1974). Particular attention is given to a study of the accuracy of available two-dimensional theory for the prediction of pure tone fan noise due to the interaction of inflow distortion with a subsonic annular blade row. The theoretical model considered consists of a single three-dimensional annular cascade rotating at constant angular velocity in an annular rigid-wall duct of infinite axial extent. Attention is given to the fluctuating pressure induced by a rotor blade row, the fluctuating velocity induced by it, an inflow distortion with only an axial velocity component, the determination of acoustic dipole distribution, the pure tone acoustic power, and two-dimensional theory and quasi-three-dimensional theory.

Kobayashi, H.↗
NASA NTRS1978

A technique for measuring in situ size distribution of aerosols

A multistage cascade impactor instrument employing piezoelectric crystals for real-time aerosol size distribution measurements is described in this paper. The instrument measures the aerosol mass concentration as a function of particle size in 10 size intervals ranging from 0.05 micrometers to 25 micrometers in diameter. The particles are then analyzed for elemental composition and morphology by means of scanning electron microscopy (SEM). Examples of particle size distributions in rocket motor exhaust plumes measured with the instrument are presented together with the elemental composition and morphology obtained by SEM.

Woods, D. C.↗
NASA NTRS1978

End-wall boundary layer prediction for axial compressors

An integral boundary layer procedure has been developed for the computation of viscous and secondary flows along the annulus walls of an axial compressor. The procedure is an outgrowth and extension of the pitch-averaged methods of Mellor and Horlock. In the present work secondary flow theory is used to develop approximations for the velocity profiles inside a rotating blade row and for the blade force deficit terms in the momentum integral equations. The computer code based on this procedure has been iteratively coupled to a quasi-one-dimensional model for the external inviscid flow. Computed results are compared with measurements in a compressor cascade.

Sockol, P. M.↗