Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “alignment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Compact, All-PM Fiber Integrated and Alignment-Free Ultrafast Yb:Fiber NALM Laser With Sub-Femtosecond Timing Jitter

We report a simple and compact design of a dispersion compensated mode-locked Yb:fiber oscillator based on a nonlinear amplifying loop mirror (NALM). The fully polarization maintaining (PM) fiber integrated laser features a chirped fiber Bragg grating (CFBG) for dispersion compensation and a fiber integrated compact non-reciprocal phase bias device, which is alignment-free. The main design parameters were determined by numerically simulating the pulse evolution in the oscillator and by analyzing their impact on the laser performance. Experimentally, we achieved an 88 fs compressed pulse duration with sub-fs timing jitter at 54 MHz repetition rate and 51 mW of output power with 5.5×10 -5 [20 Hz, 1 MHz] integrated relative intensity noise (RIN). Furthermore, we demonstrate tight phase-locking of the laser's carrier-envelope offset frequency ( fceo ) to a stable radio frequency (RF) reference and of one frequency comb tooth to a stable optical reference at 291 THz.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Self-Aligned Selective Area Front Contacts on Poly -Si/SiO x Passivating Contact c -Si Solar Cells

We report both polarity poly-Si/SiO x passivating contacts in a front/back device configuration may represent the next solar cell architecture after tunnel oxide passivating contacts (TOPCon) cells, but high parasitic absorption in the front poly -Si layer often limits its performance. This work explores a wet etching technique to remove the front poly -Si in the nonmetallized regions using self-aligned metal grids as an etch mask. We systematically examine various dielectric layers (SiN x ,Al 2 O 3 , and stacks thereof) to study the repassivation of the etched n + surface, and find that an SiN x /Al 2 O 3 passivation stack can effectively repassivate the etched surface, which we attribute to field-effect passivation from the positive fixed charge from the SiN x layer, and excellent chemical passivation property from Al 2 O 3 in the form of atomic H. We demonstrate a front/back poly-Si/SiO x passivating contact device, with an open-circuit voltage (V oc ) of 690 mV, short-circuit current density (J sc ) of 39.8 mA/cm 2 , fill factor of 78%, and power conversion efficiency of 21.4%. Furthermore, simulations using SunSolve and Quokka 3 show good agreement with both the optical and electrical properties of the experimental device. The power loss analysis reveals improvements in the optical loss from the back Ti adhesion and front SiN x layers would lead to a 23.5% device. Lastly, a techno-economic model compares the production cost of this improved cell with the current TOPCon cells. Our results highlight that further cost reductions in single-sided doped poly -Si layers are needed to compete with mainstream passivated emitter and rear cell, and TOPCon technologies.

14 SOLAR ENERGY↗
DOE OSTI2018

Self Aligned Aluminum Selective Emitter for n-type Si Cells

We show a method for making a self-aligned selective emitter by annealing aluminum grid lines above the SiAl eutectic temperature, and study the recombination properties using lifetime measurements. The dark saturation current density at the metal contact (J 0,metal ) is determined as a function of minority carrier density using photoconductive decay. After annealing at 600 degrees C, J 0,metal decreases from 1800 fA cm -2 to 500 fA cm -2 at an injection level of 1E15 cm -3 . This value of J 0,metal would correspond to a very low emitter recombination contribution of ~10 - 25 fA cm -2 for a front metal grid with area coverage of 2 - 5%. In addition, J 0,metal is found to be injection dependent. A low contact resistivity of ~0.1 mOhm cm -2 is obtained from transmission line measurement (TLM).

14 SOLAR ENERGY↗
DOE OSTI2020

Self-Aligned, Selective Area Poly-Si/SiO2 Passivated Contacts for Enhanced Photocurrent in Front/Back Solar Cells

Poly-Si/SiO 2 passivated contact front/back solar cells suffer low Jsc due to parasitic absorption in the front poly-Si layer. We demonstrate a self-aligned, selective area front contact dry-etch technique that retains the as-deposited poly-Si beneath the metal grid lines but thins it elsewhere. Jsc improves by 0.7 mA/cm 2 over our standard 40 nm thick poly-Si. Greater improvements are expected with thicker poly-Si needed for fired metal contacts. Surface passivation is slightly diminished with poly-Si thinning but can be partially restored with rehydrogenation.

14 SOLAR ENERGY↗
DOE OSTI2026

Performance-Aligned LLMs for Generating Fast HPC Code

Optimizing scientific software is a difficult task because codebases are often large and complex, and performance can depend upon several factors including the algorithm, its implementation, and hardware among others. Causes of poor performance can originate from disparate sources and be difficult to diagnose. Recent years have seen a multitude of work that use large language models (LLMs) to assist in software development tasks. However, these tools are trained to model the distribution of code as text, and are not specifically designed to understand performance aspects of code. In this work, we introduce a reinforcement learning based methodology to align the outputs of code LLMs with performance. This allows us to build upon the current code modeling capabilities of LLMs and extend them to generate better performing code. Here, we demonstrate that our fine-tuned model improves the expected speedup of generated code over base models for a set of benchmark tasks from 0.9 to 1.6 for serial code and 1.9 to 4.5 for OpenMP parallel code.

Computer science↗
DOE OSTI2018

Band alignment at the CdTe/InSb (001) heterointerface

Typically, CdTe/InSb heterojunctions have attracted considerable attention because of its almost perfect lattice match and the presence of nonoctal interface bonding. This heterojunction is a model heterovalent system to describe band offsets. Here, molecular beam epitaxy was used to deposit a 5 nm epitaxial CdTe (001) layer on an InSb (001) surface. Monochromatic x-ray photoemission spectroscopy and ultraviolet photoemission spectroscopy were used to characterize the electronic states of clean InSb and CdTe surfaces and CdTe/InSb (001) heterostructures. A room temperature remote hydrogen-plasma process was used to clean the surfaces prior to characterization. The results indicate a valence band offset of 0.89 eV and a type-I (straddling gap) alignment for the CdTe/InSb (001) heterostructure interface. In addition, In-Te bonding was observed at the interface. Downward band bending of the InSb is attributed to excess electrons introduced by nonoctal In-Te interface bonding.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Self-assembled vertically aligned nanocomposite systems integrated on silicon substrate: Progress and future perspectives

Silicon (Si) integration is a critical step for implementing functional oxides into Si-based electronic devices, considering the advantages of low-cost and scalability of Si substrates. In the past decade, self-assembled vertically aligned nanocomposites (VANs) have attracted enormous research interest owing to their unique multifunctionalities and highly tunable physical properties as well as their one-step self-assembly process. Most of the VAN thin films have been reported to grow epitaxially on single crystalline oxide substrates, however, with limited systems reported on Si substrates due to the very large lattice mismatch between oxides and Si lattices. In this review, the current progress for self-assembled VAN systems integrated on a Si substrate is summarized. Buffer layered enabled VAN growth has been proven to be an effective approach for improving the epitaxial quality of oxide-oxide and oxide-metal VAN systems, while direct growth is preferred in nitride-metal VAN systems. Furthermore, the material versatility enables the Si-integrated VAN thin films to exhibit distinct physical properties such as ferromagnetism, ferroelectricity, magnetoresistance, as well as unique optical properties. The review also summarizes the various parameters for tuning the growth morphologies and corresponding properties for the VAN systems, including phase molar ratio, deposition frequency, buffer layers, background pressure, etc. Finally, future perspectives are discussed including new VAN system exploration, physical properties tuning, as well as design and fabrication of Si-based nanoelectronics and nanophotonic devices applications.

36 MATERIALS SCIENCE↗
DOE OSTI2012

A patient alignment solution for lung SBRT setups based on a deformable registration technique

Purpose: In this work, the authors propose a novel registration strategy for translation-only correction scenarios of lung stereotactic body radiation therapy setups, which can achieve optimal dose coverage for tumors as well as preserve the consistency of registrations with minimal human interference. Methods: The proposed solution (centroid-to-centroidor CTC solution) uses the average four-dimensional CT (A4DCT) as the reference CT. The cone-beam CT (CBCT) is deformed to acquire a new centroid for the internal target volume (ITV) on the CBCT. The registration is then accomplished by simply aligning the centroids of the ITVs between the A4DCT and the CBCT. Sixty-seven cases using 64 patients (each case is associated with separate isocenters) have been investigated with the CTC method and compared with the conventional gray-value (G) mode and bone (B) mode registration methods. Dosimetric effects among the tree methods were demonstrated by 18 selected cases. The uncertainty of the CTC method has also been studied. Results: The registration results demonstrate the superiority of the CTC method over the other two methods. The differences in the D99 and D95 ITV dose coverage between the CTC method and the original plan is small (within 5%) for all of the selected cases except for one for which the tumor presented significant growth during the period between the CT scan and the treatment. Meanwhile, the dose coverage differences between the original plan and the registration results using either the B or G method are significant, as tumor positions varied dramatically, relative to the rib cage, from their positions on the original CT. The largest differences between the D99 and D95 dose coverage of the ITV using the B or G method versus the original plan are as high as 50%. The D20 differences between any of the methods versus the original plan are all less than 2%. Conclusions: The CTC method can generate optimal dose coverage to tumors with much better consistency compared with either the G or B method, and it is especially useful when the tumor position varies greatly from its position on the original CT, relative to the rib cage.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2013

Quality assurance of asymmetric jaw alignment using 2D diode array

Purpose: A method using a 2D diode array is proposed to measure the junction gap (or overlap) and dose with high precision for routine quality assurance of the asymmetric jaw alignment.Methods: The central axis (CAX) of the radiation field was determined with a 15 × 15 cm{sup 2} photon field at four cardinal collimator angles so that the junction gap (or overlap) can be measured with respect to the CAX. Two abutting fields having a field size of 15 cm (length along the axis parallel to the junction) × 7.5 cm (width along the axis perpendicular to the junction) were used to irradiate the 2D diode array (MapCHECK2) with 100 MU delivered at the photon energy of 6 MV. The collimator was slightly rotated at 15° with respect to the beam central axis to increase the number of diodes effective on the measurement of junction gap. The junction gap and dose measured in high spatial resolution were compared to the conventional methods using an electronic portal imaging device (EPID) and radiochromic film, respectively. In addition, the reproducibility and sensitivity of the proposed method to the measurements of junction gap and dose were investigated.Results: The junction gap (or overlap) and dose measured by MapCHECK2 agreed well to those measured by the conventional methods of EPID and film (the differences ranged from −0.01 to 0 cm and from −1.34% to 0.6% for the gap and dose, respectively). No variation in the repeat measurements of the junction gap was found whereas the measurements of junction dose were found to vary in quite a small range over the days of measurement (0.21%–0.35%). While the sensitivity of the measured junction gap to the actual junction gap applied was the ideal value of 1 cm/cm as expected, the sensitivity of the junction dose to the actual junction gap increased as the junction gap (or overlap) decreased (maximum sensitivity: 201.7%/cm).Conclusions: The initial results suggest that the method is applicable for a comprehensive quality assurance of the asymmetric jaw alignment.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2014

SU-E-J-107: Supervised Learning Model of Aligned Collagen for Human Breast Carcinoma Prognosis

Purpose: Our goal is to develop and apply a set of optical and computational tools to enable large-scale investigations of the interaction between collagen and tumor cells. Methods: We have built a novel imaging system for automating the capture of whole-slide second harmonic generation (SHG) images of collagen in registry with bright field (BF) images of hematoxylin and eosin stained tissue. To analyze our images, we have integrated a suite of supervised learning tools that semi-automatically model and score collagen interactions with tumor cells via a variety of metrics, a method we call Electronic Tumor Associated Collagen Signatures (eTACS). This group of tools first segments regions of epithelial cells and collagen fibers from BF and SHG images respectively. We then associate fibers with groups of epithelial cells and finally compute features based on the angle of interaction and density of the collagen surrounding the epithelial cell clusters. These features are then processed with a support vector machine to separate cancer patients into high and low risk groups. Results: We validated our model by showing that eTACS produces classifications that have statistically significant correlation with manual classifications. In addition, our system generated classification scores that accurately predicted breast cancer patient survival in a cohort of 196 patients. Feature rank analysis revealed that TACS positive fibers are more well aligned with each other, generally lower density, and terminate within or near groups of epithelial cells. Conclusion: We are working to apply our model to predict survival in larger cohorts of breast cancer patients with a diversity of breast cancer types, predict response to treatments such as COX2 inhibitors, and to study collagen architecture changes in other cancer types. In the future, our system may be used to provide metastatic potential information to cancer patients to augment existing clinical assays.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2015

Bioinspired large-scale aligned porous materials assembled with dual temperature gradients

Natural materials, such as bone, teeth, shells, and wood, exhibit outstanding properties despite being porous and made of weak constituents. Frequently, they represent a source of inspiration to design strong, tough, and lightweight materials. Although many techniques have been introduced to create such structures, a long-range order of the porosity as well as a precise control of the final architecture remain difficult to achieve. These limitations severely hinder the scale-up fabrication of layered structures aimed for larger applications. We report on a bidirectional freezing technique to successfully assemble ceramic particles into scaffolds with large-scale aligned, lamellar, porous, nacre-like structure and long-range order at the centimeter scale. This is achieved by modifying the cold finger with a polydimethylsiloxane (PDMS) wedge to control the nucleation and growth of ice crystals under dual temperature gradients. Our approach could provide an effective way of manufacturing novel bioinspired structural materials, in particular advanced materials such as composites, where a higher level of control over the structure is required.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Energy penetration into arrays of aligned nanowires irradiated with relativistic intensities: Scaling to terabar pressures

Ultrahigh-energy density (UHED) matter, characterized by energy densities >1 × 10 8 J cm –3 and pressures greater than a gigabar, is encountered in the center of stars and inertial confinement fusion capsules driven by the world’s largest lasers. Similar conditions can be obtained with compact, ultrahigh contrast, femtosecond lasers focused to relativistic intensities onto targets composed of aligned nanowire arrays. We report the measurement of the key physical process in determining the energy density deposited in high-aspect-ratio nanowire array plasmas: the energy penetration. By monitoring the x-ray emission from buried Co tracer segments in Ni nanowire arrays irradiated at an intensity of 4 × 10 19 W cm –2 , we demonstrate energy penetration depths of several micrometers, leading to UHED plasmas of that size. As a result, relativistic three-dimensional particle-in-cell simulations, validated by these measurements, predict that irradiation of nanostructures at intensities of >1 × 10 22 W cm –2 will lead to a virtually unexplored extreme UHED plasma regime characterized by energy densities in excess of 8 × 10 10 J cm –3 , equivalent to a pressure of 0.35 Tbar.

42 ENGINEERING↗
DOE OSTI2019

3D strain-induced superconductivity in La 2 CuO 4+δ using a simple vertically aligned nanocomposite approach

A long-term goal for superconductors is to increase the superconducting transition temperature, T C . In cuprates, T C depends strongly on the out-of-plane Cu-apical oxygen distance and the in-plane Cu-O distance, but there has been little attention paid to tuning them independently. Here, in simply grown, self-assembled, vertically aligned nanocomposite thin films of La 2 CuO 4+δ + LaCuO 3 , by strongly increasing out-of-plane distances without reducing in-plane distances (three-dimensional strain engineering), we achieve superconductivity up to 50 K in the vertical interface regions, spaced ~50 nm apart. No additional process to supply excess oxygen, e.g., by ozone or high-pressure oxygen annealing, was required, as is normally the case for plain La 2 CuO 4+δ films. Finally, our proof-of-concept work represents an entirely new approach to increasing >T C n cuprates or other superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

One-dimensional alignment of defects in a flexible metal-organic framework

Crystalline materials are often considered to have rigid periodic lattices, while soft materials are associated with flexibility and nonperiodicity. The continuous evolution of metal-organic frameworks (MOFs) has erased the boundaries between these two distinct conceptions. Flexibility, disorder, and defects have been found to be abundant in MOF materials with imperfect crystallinity, and their intricate interplay is poorly understood because of the limited strategies for characterizing disordered structures. Here, we apply advanced nuclear magnetic resonance spectroscopy to elucidate the mesoscale structures in a defective MOF with a semicrystalline lattice. We show that engineered defects can tune the degree of lattice flexibility by combining both ordered and disordered compartments. The one-dimensional alignment of correlated defects is the key for the reversible topological transition. The unique matrix is featured with both rigid framework of nanoporosity and flexible linkage of high swellability.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Quantifying Stern layer water alignment before and during the oxygen evolution reaction

While water’s oxygen is the electron source in the industrially important oxygen evolution reaction, the strong absorber problem clouds our view of how the Stern layer water molecules orient themselves in response to applied potentials. Here, we report nonlinear optical measurements on nickel electrodes held at pH 13 indicating a disorder-to-order transition in the Stern layer water molecules before the onset of Faradaic current. A full water monolayer (1.1 × 10 15 centimeter −2 ) aligns with oxygen atoms pointing toward the electrode at +0.8 volt and the associated work is 80 kilojoule per mole. Our experiments identify water flipping energetics as a target for understanding overpotentials, advance molecular electrochemistry, provide benchmarks for electrical double layer models, and serve as a diagnostic tool for understanding electrocatalysis.

Science & Technology - Other Topics↗
DOE OSTI2023

Autonomous alignment and healing in multilayer soft electronics using immiscible dynamic polymers

Self-healing soft electronic and robotic devices can, like human skin, recover autonomously from damage. While current devices use a single type of dynamic polymer for all functional layers to ensure strong interlayer adhesion, this approach requires manual layer alignment. In this study, we used two dynamic polymers, which have immiscible backbones but identical dynamic bonds, to maintain interlayer adhesion while enabling autonomous realignment during healing. These dynamic polymers exhibit a weakly interpenetrating and adhesive interface, whose width is tunable. When multilayered polymer films are misaligned after damage, these structures autonomously realign during healing to minimize interfacial free energy. Finally, we fabricated devices with conductive, dielectric, and magnetic particles that functionally heal after damage, enabling thin-film pressure sensors, magnetically assembled soft robots, and underwater circuit assembly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2012

On the possible common nature of double extensive air showers and aligned events

Double extensive air showers and aligned events at energies in the region E Greater-Than-Or-Equivalent-To 10{sup 16} eV were discovered more than a quarter of a century ago. However, there is still no satisfactory explanation of their nature. In the present study, it is assumed that these two types of events have common nature, stemming from the break of a string that arises in the interaction of ultrahigh-energy particles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2015

Orientation features of {sup 24}Mg(2+) aligned nuclei in (p, p) and (d, d) reactions at E{sub x} ≈ 7.5 MeV per nucleon

Experimental angular dependences of cross sections for elastic and inelastic scattering and the result obtained by reconstructing the populations of magnetic sublevels, multipole-moment orientation tensors, and polarization tensors are presented for {sup 24}Mg (2{sup +}, 1.369 MeV) aligned nuclei produced in inelastic proton scattering at E{sub p} = 7.4 MeV. The experimental results in question are compared with the results of calculations based on the coupled-channel method and on the compound-nucleus model, the 3/2{sup +} resonance in the {sup 25}Al compound nucleus being taken into account. The orientation features of {sup 24}Mg (2{sup +}, 1.369 MeV) nuclei produced in inelastic proton and deuteron scattering on {sup 24}Mg at E{sub x} ≈ 7.5 MeV per nucleon are found to be generally similar despite a substantial difference in the respective differential cross sections.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗