Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WORK CAPACITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Battery Evaluation Profiles for X-57 and Future Urban Electric Aircraft

Battery energy density is one of the most critical design parameters for sizing all-electric aircraft, however it’s easily overestimated. Establishing the effective, usable energy density is confused by varying degrees of margin needed to account for structural and thermal management between different cell chemistry and pack designs. Therefore, a better methodology is needed to fairly compare emerging battery technologies for electric aircraft. Currently, there is a loss of critical information when vehicle trade studies are performed using “nominal” published cell-level performance metrics. Aircraft power demands rarely match these nominal power profiles, and aircraft designers lack the ability to accurately simulate the battery performance and temperature off-nominally unless the battery chemistry is well established. Conversely, battery suppliers have no generalized reference cases to publish more realistic performance metrics. This can lead to poor assumptions, such as aircraft studies assuming a fixed discharge efficiency of a battery, when in reality the usable energy in a pack is dependent on the power and thermal profile. Information needed to properly assess weight penalties for thermal management is also typically poorly characterized when assessing candidate batteries. This paper serves to better inform battery development, and similarly, provide aircraft designers with more realistic assumptions for applying knockdown margins in their designs. Detailed power and thermal performance estimates are provided, which provide a starting point for sizing power and thermal budgets using experimentally derived battery models. Results show that the X-57 battery-to-shaft efficiency is 77.3% for a particular optimized mission. Considering a 25% reserve on the battery capacity, this means that only roughly half of the original 55.3kWh ‘nominal’ pack energy can be converted to useful work during a mission. Further estimates on a clean-sheet VTOL optimization show an average 82.7% battery-to-shaft efficiency, using 98% peak efficiency inverters and 97.4% peak efficiency motors. Although higher battery efficiencies are possible, the resulting weight penalty negates improvement in vehicle performance. These trade-offs and resulting power profiles are provided as a starting point to better assess future battery designs.

Battery Electric Aircraft↗

Battery Evaluation Profiles for X-57 and Future Urban Electric Aircraft

Battery energy density is one of the most critical design parameters for sizing all-electric aircraft, however it’s easily overestimated. Establishing the effective, usable energy density is confused by varying degrees of margin needed to account for structural and thermal management between different cell chemistry and pack designs. Therefore, a better methodology is needed to fairly compare emerging battery technologies for electric aircraft. Currently, there is a loss of critical information when vehicle trade studies are performed using “nominal” published cell-level performance metrics. Aircraft power demands rarely match these nominal power profiles, and aircraft designers lack the ability to accurately simulate the battery performance and temperature off-nominally unless the battery chemistry is well established. Conversely, battery suppliers have no generalized reference cases to publish more realistic performance metrics. This can lead to poor assumptions, such as aircraft studies assuming a fixed discharge efficiency of a battery, when in reality the usable energy in a pack is dependent on the power and thermal profile. Information needed to properly assess weight penalties for thermal management is also typically poorly characterized when assessing candidate batteries. This paper serves to better inform battery development, and similarly, provide aircraft designers with more realistic assumptions for applying knockdown margins in their designs. Detailed power and thermal performance estimates are provided, which provide a starting point for sizing power and thermal budgets using experimentally derived battery models. Results show that the X-57 battery-to-shaft efficiency is 77.3% for a particular optimized mission. Considering a 25% reserve on the battery capacity, this means that only roughly half of the original 55.3kWh ‘nominal’ pack energy can be converted to useful work during a mission. Further estimates on a clean-sheet VTOL optimization show an average 82.7% battery-to-shaft efficiency, using 98% peak efficiency inverters and 97.4% peak efficiency motors. Although higher battery efficiencies are possible, the resulting weight penalty negates improvement in vehicle performance. These trade-offs and resulting power profiles are provided as a starting point to better assess future battery designs.

Battery↗

Long-Term Planning for the Tamil Nadu Power System

Increased deployment of wind and solar raises new questions for power system planners regarding the future mix of generation technologies, optimal siting of generation capacity, trade-offs between generation and transmission investments, and system flexibility needs. The National Renewable Energy Laboratory (NREL) is working with Tamil Nadu Generation and Distribution Company (TANGEDCO) to answer the following questions: How much—and what type—of generation and transmission investments are needed to serve future demand at least cost? How can variable resources such as wind and solar be considered in the planning process? What are the key drivers (e.g., policies, technology costs, fuel constraints) for investments?

Children's Investment Fund Foundation↗

Optimization of a dry, mixed nuclear fuel storage array for nuclear criticality safety - 14339

A dry storage array of used nuclear fuel at the Idaho National Laboratory contains a mixture of more than twenty different types of research and test reactor fuels. Significant neutronic interaction occurs between fuel canisters within this large storage arrangement of 636 fuel storage canisters. Nuclear criticality safety is maintained primarily by moderation control and through control of neutron interaction and leakage provided by the credited geometry. Over the nearly forty years of operation the collected fuels are now arranged in a configuration that does not minimize the system neutron multiplication factor (k{sub eff}). This creates a concern since the entire remaining facility storage capacity cannot be utilized without exceeding the system minimum subcritical state (k{sub safe}) for ensuring nuclear criticality safety. This work determines a more optimal arrangement for the stored fuels with a goal to minimize the system k{sub eff}, but also with a minimum of potential fuel canister relocation movements. The ultimate goal is to establish a solution for this multiple-objective optimization problem by finding the Pareto Front for maximum k{sub eff} reduction versus the number of canister relocations. The process first required additional analysis of the array by Monte-Carlo neutron transport codes (specifically, MCNP) to gain a greater understanding of the interaction characteristics of the disparate fuel types. Some stored fuels are composed of primarily metallic and oxide components that provide very little inherent moderation, while other fuel types contain graphite or zirconium-hydride which can contribute a significant amount of moderation. These factors cause a complex relationship within a fuel arrangement with respect to thermal utilization and axial leakage probability. The new MCNP analysis was utilized to develop a simplified spreadsheet-based empirical model which simulates the array k{sub eff} result. This empirical model was benchmarked against additional MCNP calculations for various arrangements and then employed in the optimization analysis. A Tabu metaheuristic and stochastic approximation optimization was applied to the empirical model with the optimization function to minimize the array k{sub eff}. The optimization algorithm interrogated the empirical model to determine the optimal rearrangement for up to sixty canister movements. The Pareto Front was found, which shows that a limited number of canister relocation movements could allow the existing thirty-one empty array positions to be filled with common research reactor fuels while also yielding a reduction in the overall array k{sub eff} relative to the current arrangement. This will impart an improvement in the facility utilization while also offering an enhancement in the safety margin. The reduction in array reactivity has been confirmed by a final set of MCNP calculations with the proposed new arrangements. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

High‐Capacity Splitting of Mono‐ and Dibranched Hexane Isomers by a Robust Zinc‐Based Metal–Organic Framework

Abstract High‐efficiency separation of C 6 alkanes, particularly the mono‐ and dibranched isomers by using porous solids, is of paramount significance in the petrochemical industry and, remains a daunting challenge. In this work, we report the complete separation of linear/monobranched hexanes from their dibranched isomers through selective size‐exclusion by a microporous MOF, Zn‐tcpt (H 3 tcpt=2,4,6‐tris(4‐carboxyphenoxy)‐1,3,5‐triazine), with a two‐fold interpenetrated structure of hms nets. Importantly, its adsorption capacity and selectivity are notably higher than those of the previously reported adsorbents that can split mono‐ and dibranched alkane isomers. Dynamic breakthrough measurements verify the excellent separation of C 6 alkane isomers by Zn‐tcpt, and the size‐exclusion based separation mechanism has been confirmed by ab initio materials modeling. The high‐efficiency separation of alkane isomers by Zn‐tcpt can be attributed to its optimal pore dimensions as well as high porosity.

Yu, Liang↗

Data for "Adsorptive Separation and Recovery of Triacetic Acid Lactone from Fermentation Broth"

Triacetic acid lactone (TAL) can be microbially produced and further chemically upgraded to several high-value chemicals. In this work, several acidic and basic ion-exchange resins and activated charcoal were evaluated for their ability to adsorb microbially produced TAL. Activated charcoal and a weak base resin, Dowex 66, showed similar TAL adsorption capacity of 0.18 ± 0.002 g/g. At 15% w/v activated charcoal, about 98% of TAL present in fermentation broth could be adsorbed. Further, ethanol washing allowed recovery of 72% of adsorbed TAL. A biorefinery producing TAL from sucrose was designed, simulated, and evaluated (through technoeconomic analysis) under uncertainty, for an estimated TAL minimum product selling price (MPSP) of $4.27/kg [$3.71−4.94/kg; 5th-95th percentiles] for the current state of technology and $2.83/kg [$2.46–3.29/kg] following potential near-term improvements to fermentation. Thus, this work provides an adsorptive process to recover microbially produced TAL that can be chemically upgraded to several industrial products.

Bioproducts↗

Six-channel adaptive fibre-optic interferometer

We have proposed and analysed a scheme for the multiplexing of orthogonal dynamic holograms in photorefractive crystals which ensures almost zero cross talk between the holographic channels upon phase demodulation. A six-channel adaptive fibre-optic interferometer was built, and the detection limit for small phase fluctuations in the channels of the interferometer was determined to be 2.1 Multiplication-Sign 10{sup -8} rad W{sup 1/2} Hz{sup -1/2}. The channel multiplexing capacity of the interferometer was estimated. The formation of 70 channels such that their optical fields completely overlap in the crystal reduces the relative detection limit in the working channel by just 10 %. We found conditions under which the maximum cross talk between the channels was within the intrinsic noise level in the channels (-47 dB).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural and physical properties of the new intermetallic compound Yb{sub 3}Pd{sub 2}Sn{sub 2}

The crystal structure of the ternary intermetallic compound Yb{sub 3}Pd{sub 2}Sn{sub 2} has been determined ab initio from powder X-ray diffraction data. The compound crystallizes as a new structure type in the orthorhombic space group Pbcm and lattice constants a=0.58262(3), b=1.68393(8), c=1.38735(7) nm. Yb{sub 3}Pd{sub 2}Sn{sub 2} is composed of a complex {sub {infinity}}[Pd{sub 2}Sn{sub 2}]{sup {delta}-} polyanionic network in which the Yb ions are embedded. A comparison between this structure and those of Eu{sub 3}Pd{sub 2}Sn{sub 2} and Ca{sub 3}Pd{sub 2}Sn{sub 2}, other novel polar intermetallic compounds, was made. DC susceptibility and {sup 170}Yb Moessbauer spectroscopic measurements indicate a close-to divalent Yb behavior. Moreover, a hybridization between 4f and conduction electrons is suggested by electronic structure calculations and heat capacity measurements. - Graphical Abstract: Polyanionic networks for Yb{sub 3}Pd{sub 2}Sn{sub 2} and Eu{sub 3}Pd{sub 2}Sn{sub 2}. Highlights: > We determined ab initio the crystal structure of the novel ternary Yb{sub 3}Pd{sub 2}Sn{sub 2} stannide. > This structure has been compared with those of other polar 3:2:2 stannides discovered in this work. > Measurements of physical properties on Yb{sub 3}Pd{sub 2}Sn{sub 2} point to a close-to-divalent Yb ion. > Electron structure calculation and heat capacity indicate some hybridization between 4f and conduction electrons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Linac cryogenic distribution system maintenance and upgrades at JLab

The Central Helium Liquefier (CHL) distribution system to the CEBAF and FEL linacs at Jefferson Lab (JLab) experienced a planned warm up during the late summer and fall of 2012 for the first time after its commissioning in 1991. Various maintenance and modifications were performed to support high beam availability to the experimental users, meet 10 CFR 851 requirements for pressure systems, address operational issues, and prepare the cryogenic interfaces for the high-gradient cryomodules needed for the 12 GeV upgrade. Cryogenic maintenance and installation work had to be coordinated with other activities in the linacs and compete for manpower from other department installation activities. With less than a quarter of the gas storage capacity available to handle the boil-off from the more than 40 cryomodules, 35,000 Nm{sup 3} of helium was re-liquefied and shipped to a vendor via a liquid tanker trailer. Nearly 200 u-tubes had to be removed and stored while seals were replaced on related equipment such as vacuum pump outs, bayonet isolation and process valves.

42 ENGINEERING↗

Using a Coarse-Grained Modeling Framework to Identify Oligomeric Motifs with Tunable Secondary Structure

Coarse-grained modeling can be used to explore general theories that are independent of specific chemical detail. In this paper, we present cg_openmm, a Python-based simulation framework for modeling coarse-grained hetero-oligomers and screening them for structural and thermodynamic characteristics of cooperative secondary structures. cg_openmm facilitates the building of coarse-grained topology and random starting configurations, setup of GPU-accelerated replica exchange molecular dynamics simulations with the OpenMM software package, and features a suite of postprocessing thermodynamic and structural analysis tools. In particular, native contact analysis, heat capacity calculations, and free energy of folding calculations are used to identify and characterize cooperative folding transitions and stable secondary structures. In this work, we demonstrate the capabilities of cg_openmm on a simple 1–1 Lennard-Jones coarse-grained model, in which each residue contains 1 backbone and 1 side-chain bead. By scanning both nonbonded and bonded force-field parameter spaces at the coarse-grained level, we identify and characterize sets of parameters which result in the formation of stable helices through cooperative folding transitions. Furthermore, we show that the geometries and stabilities of these helices can be tuned by manipulating the force-field parameters.

36 MATERIALS SCIENCE↗

Stability of Metal–Organic Framework-Supported Amines under Exposure to Ozone Generated from Air

Amine compounds supported on porous materials such as metal–organic frameworks (MOFs) have shown promising performance for direct air capture (DAC) due to their enhanced affinity for CO 2 . Although features such as adsorption capacity and selectivity are paramount in these composites, their long-term stability has a major impact on the operating cost of DAC systems. In this work, changes in carbon capture performance, crystallinity, porosity and chemical environment of the constituting atoms of MOF-amine composites are explored after exposure to ozone and NOx impurities generated from corona discharge applied to air. From the obtained results, the stabilities of Mg 2 (dobpdc) (dobpdc 4– = 4,4′-dioxidobiphenyl-3,3′-dicarboxylate) grafted with ethylenediamine (en), N-methylethylenediamine (men), and N,N-dimethylethylenediamine (dmen), as well as MIL-101(Cr) MOF impregnated with polyethylenimine (PEI), are compared. A negative effect in the overall CO 2 adsorption capacity is observed for all MOF composites after exposure, as well as a decrease in the adsorption step pressure of CO 2 for Mg 2 (dobpdc) amine-grafted composites, as shown via dynamic gravimetric adsorption experiments. Spectroscopic analyses indicate that oxidation of amine groups through the formation of nitro functional groups occurs as well as a decrease in the electron-donation interaction between the supported amines and the metal nodes of the MOFs.

adsorption↗

High–Capacity Splitting of Mono– and Dibranched Hexane Isomers by a Robust Zinc–Based Metal–Organic Framework

High-efficiency separation of C 6 alkanes, particularly the mono- and dibranched isomers by using porous solids, is of paramount significance in the petrochemical industry and, remains a daunting challenge. In this work, we report the complete separation of linear/monobranched hexanes from their dibranched isomers through selective size-exclusion by a microporous MOF, Zn-tcpt (H3tcpt=2,4,6-tris(4-carboxyphenoxy)-1,3,5-triazine), with a two-fold interpenetrated structure of hms nets. Importantly, its adsorption capacity and selectivity are notably higher than those of the previously reported adsorbents that can split mono- and dibranched alkane isomers. Dynamic breakthrough measurements verify the excellent separation of C 6 alkane isomers by Zn-tcpt, and the size-exclusion based separation mechanism has been confirmed by ab initio materials modeling. Furthermore, the high-efficiency separation of alkane isomers by Zn-tcpt can be attributed to its optimal pore dimensions as well as high porosity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrode Induced Removal and Recovery of Uranium (VI) from Acidic Subsurfaces

The overarching objective of this research is to provide an improved understanding of how aqueous geochemical conditions impact the removal of U and Tc from groundwater and how engineering design may be utilized to optimize removal of these radionuclides. Experiments were designed to address the unique conditions in Area 3 of ORNL while also providing broader insight into the geochemical effectors of the removal rates and extent for U and Tc. The specific tasks of this work were to: 1) quantify the impact of common aqueous geochemical and operational conditions on the rate and extent of U removal and recovery from water, 2) investigate the removal of Tc with polarized graphite electrode, and determine the influence of geochemical and operational conditions on Tc removal and recovery, 3) determine whether U and Tc may be treated simultaneous from Area 3 groundwater, and examine the bench-scale performance of electrode-based treatment, and 4) determine the capacity of graphite electrodes for U(VI) removal and develop a mathematical, kinetic model for the removal of U(VI) from aqueous solution. Overall the body of work suggests that an electrode-based approach for the remediation of acidic subsurface environments, such as those observed in Area 3 of ORNL may be successful for the removal for both U(VI) and Tc. Carbonaceous (graphite) electrode materials are likely to be the least costly means to maximize removal rates and efficiency by maximizing the electrode surface area.

54 ENVIRONMENTAL SCIENCES↗

Enhancing Cycling Stability of Lithium Metal Batteries by a Bifunctional Fluorinated Ether

Abstract The lifespan of lithium (Li) metal batteries (LMBs) can be greatly improved by the formation of inorganic‐rich electrode‐electrolyte interphases (EEIs) (including solid‐electrolyte interphase on anode and cathode‐electrolyte interphase on cathode). In this work, a localized high‐concentration electrolyte containing lithium bis(fluorosulfonyl)imide (LiFSI) salt, 1,2‐dimethoxyethane (DME) solvent and 1,2‐bis(1,1,2,2‐tetrafluoroethoxy)ethane (BTFEE) diluent is optimized. BTFEE is a fluorinated ether with weakly‐solvating ability for LiFSI so it also acts as a co‐solvent in this electrolyte. It can facilitate anion decomposition at electrode surfaces and promote the formation of more inorganic‐rich EEI layers. With an optimized molar ratio of LiFSI:DME:BTFEE = 1:1.15:3, LMBs with a high loading (4 mAh cm −2 ) lithium nickel manganese cobalt oxide (LiNi 0.8 Mn 0.1 Co 0.1 ) cathode can retain 80% capacity in 470 cycles when cycled in a voltage range of 2.8–4.4 V. The fundamental understanding on the functionality of BTFEE revealed in this work provides new perspectives on the design of practical high‐energy density battery systems.

25 ENERGY STORAGE↗

Continued Advancement of Supported Liquid Membranes for Carbon Dioxide Control in Extravehicular Activity Applications

The Development of a new, robust, portable life support system (PLSS) is currently a high NASA priority in order to support longer and safer extravehicular activity (EVA) missions that will be necessary as space travel extends to near-Earth asteroids and eventually Mars. One of the critical PLSS functions is maintaining the carbon dioxide (CO2) concentration in the suit at acceptable levels. The Metal Oxide (MetOx) canister has a finite CO2 adsorption capacity and therefore in order to extend mission times, the unit would have to be larger and heavier, which is undesirable; therefore new CO2 control technologies must be developed. While recent work has centered on the use of alternating sorbent beds that can be regenerated during the EVA, this strategy increases the system complexity and power consumption. A simpler approach is to use a membrane that vents CO2 to space but retains oxygen(O2). A membrane has many advantages over current technology: it is a continuous system with no theoretical capacity limit, it requires no consumables, and it requires no hardware for switching beds between absorption and regeneration. Conventional gas separation membranes do not have adequate selectivity for use in the PLSS, but the required performance could be obtained with a supported liquid membrane (SLM), which consists of a microporous film filled with a liquid that selectively reacts with CO2 over oxygen (O2). In a recently completed Phase II Small Business Innovative Research project, Reaction Systems developed a new reactive liquid that has effectively zero vapor pressure, making it an ideal candidate for use in an SLM. Results obtained with the SLM in a flat sheet configuration with representative pressures of CO2, O2, and water (H2O) have shown that the CO2 permeation rate and CO2/O2 selectivity requirements have been met. In addition, the SLM vents moisture to space very effectively. The SLM has also been prepared and tested in a hollow fiber form, which will be necessary to meet size requirements in the PLSS. In initial tests, the required CO2 permeance values have been obtained, while the current CO2/O2 selectivity values are somewhat lower than needed. However, the performance of the SLM is a strong function of the method used to impregnate the sorbent in the hollow fiber walls and rapid progress is being made in that area.

Wickham, David T.↗

Quantifying Effects of Departure and Flight Time Uncertainty on Urban Air Mobility Operations

Demand capacity balancing is a key mechanism for maintaining safe and efficient Urban Air Mobility (UAM) operations. However, uncertainties such as departure delays and flight time variation may reduce the effectiveness of algorithms used for balancing and detrimentally impact the safety and efficiency of UAM operations. In this paper, the effects of these uncertainties on UAM operations are quantified by modeling a distribution of departure and flight time errors. A route network in the Dallas/Fort Worth metropolitan area was used to simulate traffic demand with and without uncertainty. Simulations were conducted with three main models of uncertainty – first uncertainty in departure time delay resulting in late takeoffs, second with uncertainty in flight times in addition to departure delays, and finally, uncertainty in departure times that cause either late or early takeoffs. Each of these simulations were performed using varied standard deviations to fully understand the effects of uncertainties. Results from these simulations were compared to a baseline simulation using the same parameters, but without any uncertainty. The results suggest that both safety and efficiency are significantly impacted by uncertainty even with relatively low uncertainty introduced. These results work towards quantifying the effects of uncertainty in flight scheduling for UAM. They will also aid in the further development of the demand capacity balancing algorithms for UAM operations and associated air traffic management.

Urban Air Mobility↗

Quantifying the Effects of Departure and Flight Time Uncertainty on Urban Air Mobility Operations

Demand capacity balancing is a key mechanism for maintaining safe and efficient Urban Air Mobility (UAM) operations. However, uncertainties such as departure delays and flight time variation may reduce the effectiveness of algorithms used for balancing and detrimentally impact the safety and efficiency of UAM operations. In this paper, the effects of these uncertainties on UAM operations are quantified by modeling a distribution of departure and flight time errors. A route network in the Dallas/Fort Worth metropolitan area was used to simulate traffic demand with and without uncertainty. Simulations were conducted with three main models of uncertainty – first uncertainty in departure time delay resulting in late takeoffs, second with uncertainty in flight times in addition to departure delays, and finally, uncertainty in departure times that cause either late or early takeoffs. Each of these simulations were performed using varied standard deviations to fully understand the effects of uncertainties. Results from these simulations were compared to a baseline simulation using the same parameters, but without any uncertainty. The results suggest that both safety and efficiency are significantly impacted by uncertainty even with relatively low uncertainty introduced. These results work towards quantifying the effects of uncertainty in flight scheduling for UAM. They will also aid in the further development of the demand capacity balancing algorithms for UAM operations and associated air traffic management.

Urban Air Mobility↗