Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WELL LOGGING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Monte Carlo based, patient-specific RapidArc QA using Linac log files

Purpose: A Monte Carlo (MC) based QA process to validate the dynamic beam delivery accuracy for Varian RapidArc (Varian Medical Systems, Palo Alto, CA) using Linac delivery log files (DynaLog) is presented. Using DynaLog file analysis and MC simulations, the goal of this article is to (a) confirm that adequate sampling is used in the RapidArc optimization algorithm (177 static gantry angles) and (b) to assess the physical machine performance [gantry angle and monitor unit (MU) delivery accuracy]. Methods: Ten clinically acceptable RapidArc treatment plans were generated for various tumor sites and delivered to a water-equivalent cylindrical phantom on the treatment unit. Three Monte Carlo simulations were performed to calculate dose to the CT phantom image set: (a) One using a series of static gantry angles defined by 177 control points with treatment planning system (TPS) MLC control files (planning files), (b) one using continuous gantry rotation with TPS generated MLC control files, and (c) one using continuous gantry rotation with actual Linac delivery log files. Monte Carlo simulated dose distributions are compared to both ionization chamber point measurements and with RapidArc TPS calculated doses. The 3D dose distributions were compared using a 3D gamma-factor analysis, employing a 3%/3 mm distance-to-agreement criterion. Results: The dose difference between MC simulations, TPS, and ionization chamber point measurements was less than 2.1%. For all plans, the MC calculated 3D dose distributions agreed well with the TPS calculated doses (gamma-factor values were less than 1 for more than 95% of the points considered). Machine performance QA was supplemented with an extensive DynaLog file analysis. A DynaLog file analysis showed that leaf position errors were less than 1 mm for 94% of the time and there were no leaf errors greater than 2.5 mm. The mean standard deviation in MU and gantry angle were 0.052 MU and 0.355 deg., respectively, for the ten cases analyzed. Conclusions: The accuracy and flexibility of the Monte Carlo based RapidArc QA system were demonstrated. Good machine performance and accurate dose distribution delivery of RapidArc plans were observed. The sampling used in the TPS optimization algorithm was found to be adequate.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

ILRS Station Reporting

Network stations provided system configuration documentation upon joining the ILRS. This information, found in the various site and system log files available on the ILRS website, is essential to the ILRS analysis centers, combination centers, and general user community. Therefore, it is imperative that the station personnel inform the ILRS community in a timely fashion when changes to the system occur. This poster provides some information about the various documentation that must be maintained. The ILRS network consists of over fifty global sites actively ranging to over sixty satellites as well as five lunar reflectors. Information about these stations are available on the ILRS website (http://ilrs.gsfc.nasa.gov/network/stations/index.html). The ILRS Analysis Centers must have current information about the stations and their system configuration in order to use their data in generation of derived products. However, not all information available on the ILRS website is as up-to-date as necessary for correct analysis of their data.

satellites↗

Long-term Results of the UCSF-LBNL Randomized Trial: Charged Particle With Helium Ion Versus Iodine-125 Plaque Therapy for Choroidal and Ciliary Body Melanoma

Purpose: Relevant clinical data are needed given the increasing national interest in charged particle radiation therapy (CPT) programs. Here we report long-term outcomes from the only randomized, stratified trial comparing CPT with iodine-125 plaque therapy for choroidal and ciliary body melanoma. Methods and Materials: From 1985 to 1991, 184 patients met eligibility criteria and were randomized to receive particle (86 patients) or plaque therapy (98 patients). Patients were stratified by tumor diameter, thickness, distance to disc/fovea, anterior extension, and visual acuity. Tumors close to the optic disc were included. Local tumor control, as well as eye preservation, metastases due to melanoma, and survival were evaluated. Results: Median follow-up times for particle and plaque arm patients were 14.6 years and 12.3 years, respectively (P=.22), and for those alive at last follow-up, 18.5 and 16.5 years, respectively (P=.81). Local control (LC) for particle versus plaque treatment was 100% versus 84% at 5 years, and 98% versus 79% at 12 years, respectively (log rank: P=.0006). If patients with tumors close to the disc (<2 mm) were excluded, CPT still resulted in significantly improved LC: 100% versus 90% at 5 years and 98% versus 86% at 12 years, respectively (log rank: P=.048). Enucleation rate was lower after CPT: 11% versus 22% at 5 years and 17% versus 37% at 12 years, respectively (log rank: P=.01). Using Cox regression model, likelihood ratio test, treatment was the most important predictor of LC (P=.0002) and eye preservation (P=.01). CPT was a significant predictor of prolonged disease-free survival (log rank: P=.001). Conclusions: Particle therapy resulted in significantly improved local control, eye preservation, and disease-free survival as confirmed by long-term outcomes from the only randomized study available to date comparing radiation modalities in choroidal and ciliary body melanoma.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Porous Iron Electrodes Reduce Energy Consumption During Electrocoagulation of a Virus Surrogate: Insights into Performance Enhancements Using Three-Dimensional Neutron Computed Tomography

Electrocoagulation has attracted significant attention as an alternative to conventional chemical coagulation because it is capable of removing a wide range of contaminants and has several potential advantages. In contrast to most electrocoagulation research that has been performed with nonporous electrodes, in this study, we demonstrate energy-efficient iron electrocoagulation using porous electrodes. In batch operation, investigation of the external pore structures through optical microscopy suggested that a low porosity electrode with sparse connection between pores may lead to mechanical failure of the pore network during electrolysis, whereas a high porosity electrode is vulnerable to pore clogging. Electrodes with intermediate porosity, instead, only suffered a moderate surface deposition, leading to electrical energy savings of 21% and 36% in terms of electrocoagulant delivery and unit log virus reduction, respectively. Neutron computed tomography revealed the critical role of electrode porosity in utilizing the electrode’s internal surface for electrodissolution and effective delivery of electrocoagulant to the bulk. Energy savings of up to 88% in short-term operation were obtained with porous electrodes in a continuous flow-through system. Further investigation on the impact of current density and porosity in long-term operation is desired as well as the capital cost of porous electrodes.

42 ENGINEERING↗

A Comparison of Linear Solvers for Resolving Flow in Three-Dimensional Discrete Fracture Networks

We compare various methods for resolving steady flow within three-dimensional discrete fracture networks, including direct methods, Krylov subspace methods with and without preconditioning, and multi-grid methods. We compared the performance of the methods based on compute times and scaling of the solution as a function of the number of grid nodes and log-variance of the hydraulic aperture. The methods are applied to three test cases: (a) variable density of networks with a truncated power-law distribution of fracture lengths, (b) a fixed network composed of monodisperse fracture sizes but varied permeability/aperture heterogeneity, (c) and a network based on field site in Nevada, US. We chose these cases to allow us to study the impact of the mesh size and flow properties, as well as to demonstrate our conclusions on a large-scale, realistic problem (more than 40 million mesh nodes). A direct solution using Cholesky factorization outperformed other methods for every example but was closely followed in performance by some algebraic multigrid (AMG) preconditioned Krylov subspace methods. Among the Krylov methods, conjugate gradients (CG) with an AMG preconditioner performs the best. Generally, Cholesky factorization is recommended, but CG with an AMG preconditioner may be suitable for very large problems beyond 40 million nodes where the entire linear system cannot reside in memory.

58 GEOSCIENCES↗

Planck 2013 results. XVIII. The gravitational lensing-infrared background correlation

The multi-frequency capability of the Planck satellite provides information both on the integrated history of star formation (via the cosmic infrared background, or CIB) and on the distribution of dark matter (via the lensing effect on the cosmic microwave background, or CMB). The conjunction of these two unique probes allows us to measure directly the connection between dark and luminous matter in the high redshift (1 ≤ z ≤ 3) Universe. We use a three-point statistic optimized to detect the correlation between these two tracers. Following a thorough discussion of possible contaminants and a suite of consistency tests, using lens reconstructions at 100, 143 and 217 GHz and CIB measurements at 100&ndash;857 GHz, we report the first detection of the correlation between the CIB and CMB lensing. The well matched redshift distribution of these two signals leads to a detection significance with a peak value of 42/19&sigma; at 545 GHz and a correlation as high as 80% across these two tracers. Our full set of multi-frequency measurements (both CIB auto- and CIB-lensing cross-spectra) are consistent with a simple halo-based model, with a characteristic mass scale for the halos hosting CIB sources of log 10 ( M/M &odot; ) = 10.5 &plusmn; 0.6. Leveraging the frequency dependence of our signal, we isolate the high redshift contribution to the CIB, and constrain the star formation rate (SFR) density at z ≥ 1. Here, we measure directly the SFR density with around 2&sigma; significance for three redshift bins between z = 1 and 7, thus opening a new window into the study of the formation of stars at early times.

79 ASTRONOMY AND ASTROPHYSICS↗

Multi-wavelength light curve model of the one year recurrence period nova M31N 2008-12a

We present a theoretical light curve model of the recurrent nova M31N 2008-12a, the current record holder for the shortest recurrence period (1 year). We combined interior structures calculated using a Henyey-type evolution code with optically thick wind solutions of hydrogen-rich envelopes, which give the proper mass-loss rates, photospheric temperatures, and luminosities. The light curve model is calculated for a 1.38 M{sub ⊙} white dwarf (WD) with an accretion rate of 1.6×10{sup −7} M{sub ⊙} yr{sup −1}. This model shows a very high effective temperature (log T{sub ph} (K)⩾4.97) and a very small wind mass-loss rate ( M-dot {sub wind}⩽9.3×10{sup −6} M{sub ⊙} yr{sup −1}) even at the maximum expansion of the photosphere. These properties are consistent with the faint optical peak of M31N 2008-12a because the brightness of the free–free emission is proportional to the square of the mass-loss rate. The model well reproduces the short supersoft X-ray turn-on time of 6 days and turn-off time of 18 days after the outburst. The ejecta mass of our model is calculated to be 6.3×10{sup −8} M{sub ⊙}, corresponding to 37% of the accreted mass. The growth rate of the WD is 0.63 times the mass accretion rate, making it a progenitor for a SN Ia. Our light curve model predicts a bright supersoft X-ray phase one or two days before the optical peak. We encourage detection of this X-ray flash in future outbursts.

79 ASTRONOMY AND ASTROPHYSICS↗

Towards an astronomical foundation model for stars with a transformer-based model

ABSTRACT Rapid strides are currently being made in the field of artificial intelligence using transformer-based models like Large Language Models (LLMs). The potential of these methods for creating a single, large, versatile model in astronomy has not yet been explored. In this work, we propose a framework for data-driven astronomy that uses the same core techniques and architecture as used by LLMs. Using a variety of observations and labels of stars as an example, we build a transformer-based model and train it in a self-supervised manner with cross-survey data sets to perform a variety of inference tasks. In particular, we demonstrate that a single model can perform both discriminative and generative tasks even if the model was not trained or fine-tuned to do any specific task. For example, on the discriminative task of deriving stellar parameters from Gaia XP spectra, we achieve an accuracy of 47 K in Teff, 0.11 dex in log g, and 0.07 dex in [M/H], outperforming an expert XGBoost model in the same setting. But the same model can also generate XP spectra from stellar parameters, inpaint unobserved spectral regions, extract empirical stellar loci, and even determine the interstellar extinction curve. Our framework demonstrates that building and training a single foundation model without fine-tuning using data and parameters from multiple surveys to predict unmeasured observations and parameters is well within reach. Such ‘Large Astronomy Models’ trained on large quantities of observational data will play a large role in the analysis of current and future large surveys.

Leung, Henry W. (ORCID:0000000200362752)↗

Asynchronous Ballistic Reversible Computing using Superconducting elements

Computing uses energy. At the bare minimum, erasing information in a computer increases the entropy. Landauer has calculated %7E k B T log(2) Joules is dissipated per bit of energy erased. While the success of Moores law has allowed increasing computing power and efficiency for many years, these improvements are coming to an end. This project asks if there is a way to continue those gains by circumventing Landauer through reversible computing. We explore a new reversible computing paradigm, asynchronous ballistic reversible computing or ABRC. The ballistic nature of data in ABRC matches well with superconductivity which provides a low-loss environment and a quantized bit encoding the fluxon. We discuss both these and our development of a superconducting fabrication process at Sandia. We describe a fully reversible 1-bit memory cell based on fluxon dynamics. Building on this model, we propose several other gates which may also offer reversible operation.

97 MATHEMATICS AND COMPUTING↗

ZFIRE: The Evolution of the Stellar Mass Tully–Fisher Relation to Redshift ∼2.2

Using observations made with MOSFIRE on Keck I as part of the ZFIRE survey, we present the stellar mass Tully–Fisher relation at 2.0<z<2.5. The sample was drawn from a stellar-mass-limited, K{sub s}-band-selected catalog from ZFOURGE over the CANDELS area in the COSMOS field. We model the shear of the Hα emission line to derive rotational velocities at 2.2× the scale radius of an exponential disk (V{sub 2.2}). We correct for the blurring effect of a 2D point-spread function (PSF) and the fact that the MOSFIRE PSF is better approximated by a Moffat than a Gaussian, which is more typically assumed for natural seeing. We find for the Tully–Fisher relation at 2.0<z<2.5 that logV{sub 2.2}=(2.18±0.051)+(0.193 ± 0.108)(logM/M{sub ⊙}−10) and infer an evolution of the zero-point of ΔM/M{sub ⊙}=−0.25±0.16 dex or ΔM/M{sub ⊙}=−0.39±0.21 dex compared to z = 0 when adopting a fixed slope of 0.29 or 1/4.5, respectively. We also derive the alternative kinematic estimator S{sub 0.5}, with a best-fit relation logS{sub 0.5}=(2.06±0.032) + (0.211±0.086) (logM/M{sub ⊙}−10), and infer an evolution of ΔM/M{sub ⊙} =−0.45±0.13 dex compared to z<1.2 if we adopt a fixed slope. We investigate and review various systematics, such as PSF effects, projection effects, systematics related to stellar mass derivation, selection biases, and slope. We find that discrepancies between the various literature values are reduced when taking these into account. Our observations correspond well with the gradual evolution predicted by semianalytic models.

79 ASTRONOMY AND ASTROPHYSICS↗

A Tidal Disruption Event in a Nearby Galaxy Hosting an Intermediate Mass Black Hole

We report the serendipitous discovery of a bright point source flare in the Abell cluster A1795 with archival EUVE and Chandra observations. Assuming the EUVE emission is associated with the Chandra source, the X-ray 0.5-7 kiloelectronvolt flux declined by a factor of approximately 2300 over a time span of 6 years, following a power-law decay with index approximately equal to 2.44 plus or minus 0.40. The Chandra data alone vary by a factor of approximately 20. The spectrum is well fit by a blackbody with a constant temperature of kiloteslas approximately equal to 0.09 kiloelectronvolts (approximately equal to 10 (sup 6) Kelvin). The flare is spatially coincident with the nuclear region of a faint, inactive galaxy with a photometric redshift consistent at the 1 sigma level with the cluster (redshift = 0.062476).We argue that these properties are indicative of a tidal disruption of a star by a black hole (BH) with log(M (sub BH) / M (sub 1 solar mass)) approximately equal to 5.5 plus or minus 0.5. If so, such a discovery indicates that tidal disruption flares may be used to probe BHs in the intermediate mass range, which are very difficult to study by other means.

bright point source flare↗

Random Variables with Moment-Matching Staircase Density Functions

This paper proposes a family of random variables for uncertainty modeling. The variables of interest have a bounded support set, and prescribed values for the first four moments. We present the feasibility conditions for the existence of any of such variables, and propose a class of variables that conforms to such constraints. This class is called staircase because the density of its members is a piecewise constant function. Convex optimization is used to calculate their distributions according to several optimality criteria, including maximal entropy and maximal log-likelihood. The flexibility and efficiency of staircases enable modeling phenomena having a possibly skewed and/or multimodal response at a low computational cost. Furthermore, we provide a means to account for the uncertainty in the distribution caused by estimating staircases from data. These ideas are illustrated by generating empirical staircase predictor models. We consider the case in which the predictor matches the sample moments exactly (a setting applicable to large datasets), as well as the case in which the predictor accounts for the sampling error in such moments (a setting applicable to sparse datasets). A predictor model for the dynamics of an aeroelastic airfoil subject to flutter instability is used as an example. The resulting predictor not only describes the system's response accurately, but also enables carrying out a risk analysis for safe flight.

Luis G. Crespo↗

HST/WFC3 near-infrared spectroscopy of quenched galaxies at z ∼ 1.5 from the WISP survey: Stellar population properties

We combine Hubble Space Telescope (HST) G102 and G141 near-IR (NIR) grism spectroscopy with HST/WFC3-UVIS, HST/WFC3-IR, and Spitzer/IRAC [3.6 μm] photometry to assemble a sample of massive (log (M {sub star}/M {sub ☉}) ∼ 11.0) and quenched (specific star formation rate <0.01 Gyr{sup –1}) galaxies at z ∼ 1.5. Our sample of 41 galaxies is the largest with G102+G141 NIR spectroscopy for quenched sources at these redshifts. In contrast to the local universe, z ∼ 1.5 quenched galaxies in the high-mass range have a wide range of stellar population properties. We find that their spectral energy distributions (SEDs) are well fitted with exponentially decreasing star formation histories and short star formation timescales (τ ≤ 100 Myr). Quenched galaxies also show a wide distribution in ages, between 1 and 4 Gyr. In the (u – r){sub 0}-versus-mass space quenched galaxies have a large spread in rest-frame color at a given mass. Most quenched galaxies populate the z ∼ 1.5 red sequence (RS), but an important fraction of them (32%) have substantially bluer colors. Although with a large spread, we find that the quenched galaxies on the RS have older median ages (3.1 Gyr) than the quenched galaxies off the RS (1.5 Gyr). We also show that a rejuvenated SED cannot reproduce the observed stacked spectra of (the bluer) quenched galaxies off the RS. We derive the upper limit on the fraction of massive galaxies on the RS at z ∼ 1.5 to be <43%. We speculate that the young quenched galaxies off the RS are in a transition phase between vigorous star formation at z > 2 and the z ∼ 1.5 RS. According to their estimated ages, the time required for quenched galaxies off the RS to join their counterparts on the z ∼ 1.5 RS is of the order of ∼1 Gyr.

79 ASTRONOMY AND ASTROPHYSICS↗

Scaling relations for galaxies prior to reionization

The first galaxies in the universe are the building blocks of all observed galaxies. We present scaling relations for galaxies forming at redshifts z ≥ 15 when reionization is just beginning. We utilize the 'Rarepeak' cosmological radiation hydrodynamics simulation that captures the complete star formation history in over 3300 galaxies, starting with massive Population III stars that form in dark matter halos as small as ∼10{sup 6} M {sub ☉}. We make various correlations between the bulk halo quantities, such as virial, gas, and stellar masses and metallicities and their respective accretion rates, quantifying a variety of properties of the first galaxies up to halo masses of 10{sup 9} M {sub ☉}. Galaxy formation is not solely relegated to atomic cooling halos with virial temperatures greater than 10{sup 4} K, where we find a dichotomy in galaxy properties between halos above and below this critical mass scale. Halos below the atomic cooling limit have a stellar mass-halo mass relationship log M {sub *} ≅ 3.5 + 1.3log (M {sub vir}/10{sup 7} M {sub ☉}). We find a non-monotonic relationship between metallicity and halo mass for the smallest galaxies. Their initial star formation events enrich the interstellar medium and subsequent star formation to a median of 10{sup –2} Z {sub ☉} and 10{sup –1.5} Z {sub ☉}, respectively, in halos of total mass 10{sup 7} M {sub ☉}, which is then diluted by metal-poor inflows well beyond Population III pre-enrichment levels of 10{sup –3.5} Z {sub ☉}. The scaling relations presented here can be employed in models of reionization, galaxy formation, and chemical evolution in order to consider these galaxies forming prior to reionization.

79 ASTRONOMY AND ASTROPHYSICS↗

A SUBSTANTIAL POPULATION OF MASSIVE QUIESCENT GALAXIES AT z ∼ 4 FROM ZFOURGE

We report the likely identification of a substantial population of massive M ∼ 10{sup 11} M {sub ☉} galaxies at z ∼ 4 with suppressed star formation rates (SFRs), selected on rest-frame optical to near-IR colors from the FourStar Galaxy Evolution Survey (ZFOURGE). The observed spectral energy distributions show pronounced breaks, sampled by a set of near-IR medium-bandwidth filters, resulting in tightly constrained photometric redshifts. Fitting stellar population models suggests large Balmer/4000 Å breaks, relatively old stellar populations, large stellar masses, and low SFRs, with a median specific SFR of 2.9 ± 1.8 × 10{sup –11} yr{sup –1}. Ultradeep Herschel/PACS 100 μm, 160 μm and Spitzer/MIPS 24 μm data reveal no dust-obscured SFR activity for 15/19(79%) galaxies. Two far-IR detected galaxies are obscured QSOs. Stacking the far-IR undetected galaxies yields no detection, consistent with the spectral energy distribution fit, indicating independently that the average specific SFR is at least 10 × smaller than that of typical star-forming galaxies at z ∼ 4. Assuming all far-IR undetected galaxies are indeed quiescent, the volume density is 1.8 ± 0.7 × 10{sup –5} Mpc{sup –3} to a limit of log{sub 10} M/M {sub ☉} ≥ 10.6, which is 10 × and 80 × lower than at z = 2 and z = 0.1. They comprise a remarkably high fraction (∼35%) of z ∼ 4 massive galaxies, suggesting that suppression of star formation was efficient even at very high redshift. Given the average stellar age of 0.8 Gyr and stellar mass of 0.8 × 10{sup 11} M {sub ☉}, the galaxies likely started forming stars before z = 5, with SFRs well in excess of 100 M {sub ☉} yr{sup –1}, far exceeding that of similarly abundant UV-bright galaxies at z ≥ 4. This suggests that most of the star formation in the progenitors of quiescent z ∼ 4 galaxies was obscured by dust.

79 ASTRONOMY AND ASTROPHYSICS↗

Energy Storage and Generation for Extreme Temperature and Pressure and Directional Measurement While Drilling Applications

FastCAP Systems Corporation has successfully completed all milestones defined by the award DE-EE0005503. Under this program, FastCAP developed three critical subassemblies to TRL3 demonstrating proof of concept of a geothermal MWD power source. This power source includes an energy harvester, electronics and a novel high temperature ultracapacitor (“ultracap”) rechargeable energy storage device suitable for geothermal exploration applications. FastCAP’s ruggedized ultracapacitor (ultracap) technology has been proven and commercialized in oil and gas exploration operating to rated temperatures of 150°C. Characteristics of this technology are that it is rechargeable and relatively high power. This technology was the basis for the advancements in rechargeable energy storage under this project. The ultracap performs reliably at 250°C and beyond and operates over a wide operating temperature range: -5°C to 250°C. The ultracap has significantly higher power density than lithium thionyl chloride batteries, a non-rechargeable incumbent used in oil and gas drilling today. Several hermetically sealed, prototype devices were tested in our laboratories at constant temperatures of 250°C showing no significant degradation over 2000 hours of operation. Other prototypes were tested at Sandia National Lab in the month of April, 2015 for a third party performance validation. These devices showed outstanding performance over 1000 hours of operation at three rated temperatures, 200°C, 225°C and 250°C, with negligible capacitance degradation and minimal equivalent series resistance (ESR) increase. Similarly, FastCAP’s ruggedized electronics have been proven and commercialized in oil and gas exploration operating to rated temperatures of 150°C. This technology was the basis for the advancements in downhole electronics under this project. Principal contributions here focused on design for manufacture innovations that have reduced the prototype build cycle time by a factor of 10x. The electronics have demonstrated a substantially reduced design cycle time by way of process and material selection innovations and have been qualified for 250°C / 10 Grms for at least 200 hours. FastCAP has also invented a rotary inertial energy generator (RIEG) to harvest various mechanical energy sources that exist downhole. This device is flow-independent and has been demonstrated as a proof of concept to survive geothermal well temperatures under this project. The herein energy harvester has been developed to provide operational power by harvesting rotational mechanical energy that exists downhole in geothermal drilling. The energy harvester has been tested at 250°C / 10 Grms for 200 hours. Deployment of these technologies in geothermal drilling and exploration applications could have an immediate and significant impact on the effectiveness and efficiency of drilling processes, particularly with regard to use of advanced logging and monitoring techniques. The ultimate goal of this work is to reduce drilling risk to make geothermal energy more attractive and viable to the customer. Generally speaking, we aim to support the transfer of MWD techniques from oil and gas to geothermal exploration with considerations toward the practical differences between the two. One of the most significant obstacles to the deployment of advanced drilling and production techniques in the geothermal context are limitations related to the maximum operating temperatures of downhole batteries used to provide power for downhole sensors, steering tools, telemetry equipment and other MWD/LWD technologies. FastCAP’s higher temperature ultracapacitor technology will provide power solutions for similar advanced drilling and production techniques, even in the harsher environments associated with geothermal energy production. This ultracapacitor will enable downhole power solutions for the geothermal industry capable of the same reliable and safe operation our team has demonstrated in the oil and gas context. Without batteries, geothermal MWD is left without a downhole power source. Some very high temperature turbines exist but provide unsteady, intermittent power and no power when the flow is off. In high loss formations common to geothermal exploration, it will be auspicious to support air drilling in which case there is no flow to power a turbine at all. In the best case, rechargeable energy storage will help to buffer unsteady power from non-battery power sources and in the worst case it will be needed to store energy from highly intermittent sources to provide a continuously operable power source to the tool.

15 GEOTHERMAL ENERGY↗

Far-infrared lines from H II regions: Abundance variations in the galaxy

Far-infrared lines of (N III) (57 microns), (O III) (52, 88 microns), (Ne III) (36 microns), and (S III) (19, 33 microns) have been measured in the H II regions G1.13 - 0.11, W31B, G23.95 + 0.15, G25.38 - 0.18, G29.96 - 0.02, W43, W51e, S156, S158, NGC 3576, NGC 3603, and G298.22-0.34. These observations were made with the facility Cryogenic Grating Spectrometer on the Kuiper Airborne Observatory to examine variations in abundances throughout the Galaxy. Previously published observations of G0.095 + 0.012, G333.60 - 0.21, G45.13 + 0.14A, K3-50, and M17 are also discussed. The giant H II region 30 Doradus in the Large Magellanic Cloud (LMC) was observed for comparison. Fluxes for (Ne II) (12.8 microns), (S IV) (10.5 microns), and the radio free-free continuum were collected from the literature for those sources. Electron densities were estimated from FIR line-pair ratios, and ionic abundances were estimated from the FIR line and radio fluxes. The excitation was estimated from the O(2+)/S(2+) ratio. Corrections for unseen ionization stages were calculated with the use of constnat-density H II region models. The validity and range of applicability of such semiempirical ionization correction schemes are discussed. The abundances with respect to hydrogen exhibit gradients with R(sub G) comparable to those previously measured for our Galaxy and for other galaxies. The overall gradients are d (log N/H)/dR = -0.10 +/- 0.02 dex/kpc, d(log Ne/H)/dR = -0.08 +/- 0.02 dex/kpc and d(log S/H)/dR = 0.07 +/- 0.02 dex/kpc. Compared to the Orion Nebula, the intermediate R(sub G) H II regions with 6 is less than R(sub G) is less than 11 kpc have similar or lower S/H and N/O ratios. The N/O ratios in the inner Galaxy are more than twice those observed in the Orion Nebula and intermediate R(sub G) H II regions. In fact, all the abundance ratios are as well or better fitted by a step fit with two levels than by a linear gradient. As has been noted in previous studies, the N/O ratio estimated from infrared observations of the doubly ionized N and O lines in H II regions is larger than the ratio estimated from optical observations of the singly ionized N and O lines. The Ne(2+)/O(2+) ratio is observed to be essentially constant over a wide range of excitation. This contradicts predictions of model H II regions calculated with the use of Local Thermodynamic Equilibrium (LTE) model stellar atmospheres. We conclude that these stellar atmospheres significantly underestimate the actual emergent fluxes for energies greater than 41 eV.

Simpson, Janet P.↗

NREL’s Cyber-Energy Emulation Platform for Research and System Visualization

This paper presents NREL’s Cyber Energy Emulation (CEE) Platform. This is a novel emulation platform for achieving real-time visualization of large-scale environments involving cyber-physical devices. It allows for the environment to include real, physical hardware, along with emulated devices communicating with each other as part of the same system. The CEE Platform is also capable of streaming, collecting, storing, transporting, and visualizing all data within the emulated environment. By providing this capability, it enables high-fidelity visual analysis of events to be performed in real time as well as the use of historical data for forensic analysis. This paper presents the design of the CEE Platform as well as several potential use cases and applications. It also aims to highlight why this type of visualization tool has potential for research and education about cyber-physical systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗