Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Utilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Enhanced Grid Operation and Optimized PV Penetration Utilizing Highly Distributed Sensor Data

Sandia National Laboratories (SNL) and Enphase Energy, Inc. (Enphase) collaborated to address challenges related to the integration of Renewable Energy Systems. The goal of this research was to develop methods to cost-effectively achieve very high PV penetration scenarios (well beyond 100% of peak load at the feeder level) by leveraging distributed inverters to increase operator visibility and provide local voltage support This project focused on the integration of high penetration PV systems and other distributed resources such as energy storage, to determine how these technologies interoperate with each other and with utility distribution operations and management systems. To address the lack of coverage of feeder monitoring and communications infrastructure, SNL and Enphase leveraged highly distributed micro inverters that were installed in very large numbers in CA and Hawaii, and that have the ability to measure currant and voltage and communicate via a highly distributed network. The data was used to verify and enhance distribution system models and to optimize the control settings of distributed resources. SNL and Enphase demonstrated the effectiveness of these techniques by analyzing high PV penetration scenarios on distribution systems in California.

14 SOLAR ENERGY↗

Algae Cultivation for Carbon Capture and Utilization Workshop Summary Report

The Algae Cultivation for Carbon Capture and Utilization Workshop Summary Report summarizes a workshop hosted by the U.S. Department of Energy's Bioenergy Technologies Office on May 23–24, 2017, in Orlando, Florida. The event gathered stakeholder input through facilitated discussions focused on innovative technologies and business strategies for growing algae on waste carbon dioxide resources.

59 BASIC BIOLOGICAL SCIENCES↗

Enhanced grid operation and optimized PV penetration utilizing highly distributed sensor data

This task describes R&D activities to establish methods to cost-effectively achieve very high PV penetration scenarios (well beyond 100% of peak load at the feeder level) by leveraging distributed inverters to increase situational awareness and provide local voltage support. The grid performance and reliability objectives (SI vision) of this proposal were selected to enhance feeder planning models that can better characterize and quantify the electric power system including the secondary system servicing customers. The Communication objective was selected to demonstrate how visibility and control of behind-the-meter systems and distributed storage at large scale can be optimized to address system reliability and variability impacts, and to maximize the value of solar in high PV penetration scenarios. The goal of this project was to achieve enhanced grid operation and optimized PV penetration utilizing highly distributed sensor data via three subtasks 1.1-1.3.

14 SOLAR ENERGY↗

MCNP6 UM Utility Programs [Slides]

The purpose of these slides is to introduce the user to MCNP6’s utility programs for the unstructured mesh capability.

97 MATHEMATICS AND COMPUTING↗

Risk and Cost Analysis of Utilizing FLEX Equipment for O&M Cost Reduction in Nuclear Power Plants

Several Nuclear Power Plant (NPP) operators in USA have announced to close their plants despite there are remaining years on their operating licenses. The cause of these closures is because the plant operators suffer financial losses. Approximately 80% of USA NPPs would have undergone financial losses if they were situated in a deregulated electricity market. In a deregulated market, electricity generators are independent entities separate from the transmission companies and Independent System Operator (ISO) which manages the market. NPPs in this market are termed merchant NPPs, and their profitability is determined solely from electricity generation revenues. Meanwhile, regulated and public power nuclear units’ profitability is determined by the regulatory process in place for each unit. Due to the complexity of differentiating each regulated and public power NPP’s regulations 36 NPPs are at an immediate risk of retiring early to stop losses, while 27 units will likely to follow in the long run. Today, cost is well-recognized and important factor in NPP decision-making that cannot be ignored. Therefore, it is essential to consider risk and cost together in decision-making to strengthen the position of the nuclear industry in an economically challenging energy market. With operational and maintenance (O&M) cost at 70% of the total operating expenditure of an NPP and some plants closing prematurely despite excellent safety record, there is an urgent need to address the high O&M cost. One of the novel entities that provide additional safety resulting in reduced risk of nuclear power plants is Flex equipment. Flex strategies were postulated by the US NRC in the wake of Fukushima Dai-chi accident to address beyond design-basis accidents and improve plant flexibility. Flex strategy comprise both onsite and off-site component storage for the provision of additional materials and equipment. This work explored innovative ways of utilizing the onsite Flex equipment during regular plant operation, for purposes in addition to the intended use of beyond design basis accidents. This report describes the risk and cost analysis of using Flex equipment during regular or unplanned maintenance.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

FERC Hydropower Licensing: A Review of Utilization of the ILP, TLP, and ALP

A preliminary consideration for license applicants seeking to develop non-federal hydropower projects includes determining whether the Federal Energy Regulatory Commission (FERC) has authority over the development, and if so, what licensing procedures are required or may be an option for authorizing the project. Projects subject to FERC jurisdiction, which do not meet the qualification requirements for an exemption from FERC hydropower licensing, must complete the FERC hydropower licensing process utilizing one of FERC's three licensing processes: The Integrated Licensing Process (ILP), Traditional Licensing Process (TLP), or Alternative Licensing Process (ALP). Effective after July 23, 2005, the ILP became the default hydropower licensing process under the FPA [18 CFR Section 5.3(a)(2)] and any license applicant seeking to use the TLP or ALP is now required to submit to FERC a request to use the TLP or ALP with their Notice of Intent (NOI) and Pre-Application Document (PAD) and receive approval before initiating either of those processes.

13 HYDRO ENERGY↗

Distribution System Market Considerations for the Hawaii Public Utilities Commission

This document was requested by the Hawaii Public Utilities Commission and is being characterized as a "quick hit" white paper on distribution system market issues. This document provides general guidance, suggestions, and examples to the HPUC as they move into the market track of their on-going proceeding on distributed energy resources.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Synchrophasor Visual Integration and Event Evaluation for Utilities (SynchroVIEEU) with High Penetration of Renewables

The Hawaiian Electric Companies (Companies), operating independent grid systems on the islands of Oahu, Hawaii, Maui, Molokai and Lanai, have been contending with some of the highest levels of renewable generation from both utility-scale and distributed generation resources. Renewable penetration levels exceeding 50% of generation are some of the highest in the nation and are changing the system characteristics and requiring operational changes to grid management. The Companies have aggressively leveraged federal, multi-state and industry grant funding to demonstrate new technologies for monitoring, visualization, forecasting and analysis to inform transformation needs and to improve operational awareness, especially at the distribution level. As part of the American Recovery and Reinvestment Act (ARRA) supported efforts to facilitate integration of renewables, synchrophasor devices were deployed on the islands of Hawaii and Maui in 2010. The devices have potential to provide Hawaii Electric Light Company (HELCO) on Hawaii Island and Maui Electric Company (MECO) with additional information to support post-event analysis and to help quantify observed area-wide changes in voltage and frequency on the systems. Consistent with the U.S. Department of Energy’s (DOE) Office of Electricity Delivery and Energy Reliability (OE) FOA objectives, the goal of this project was to accelerate the integration of synchrophasor information into production grade data visualization and analysis platforms/models to inform timely, efficient and reliable operations of a modern grid in light of high penetrations of renewable resources. The project comprised a two-year development effort to investigate the integration and visualization of synchrophasor field data into production-ready transmission and distribution proactive modeling efforts and a common data analysis platform application currently being used by the Companies. Conceptually, the project was about getting the right data to the right people at the right time in an easily accessible and timely environment.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Highly Accurate Method for Real-Time Active Power Reserve Estimation for Utility-Scale Photovoltaic Power Plants

This paper applies a robust technique for determining the available power from a curtailed utility-scale photovoltaic (PV) power plant. The proposed technique does not require deploying any additional equipment or sensors and is based only on the addition of new control logic to the existing power plant controller. Also, the proposed method is universally applicable to PV plants with any type of smart inverters and PV modules. Accurate determination of available power is important for using curtailed PV generation as a resource for various types of active power controls, such as spinning reserves and primary and secondary frequency control. For PV plants to be able to maintain the desired regulation range, the plant controller must be able to estimate the available aggregate peak power that all the plant's inverters can produce at any point in time and ensure that the control error stays within the tolerance band at all times. In this paper, we explore a highly accurate control method that uses dedicated inverters within the plant as reference units and evaluates the available aggregate peak power for the whole plant under different cloud variability conditions.

14 SOLAR ENERGY↗

Utility Investments in Resilience of Electricity Systems

Recent power outages caused by hurricanes, wildfires and other natural disasters, coupled with evolving cyber and physical threats, have increased interest in the resilience of electricity systems. The U.S. Department of Energy’s Grid Modernization Lab Consortium (GMLC) defines resilience as “the ability to prepare for and adapt to changing conditions and withstand and recover rapidly from disruptions, including the ability to withstand and recover from deliberate attacks, accidents, or naturally occurring threats or incidents.” In a new report for Berkeley Lab, organizations that represent state regulators, utilities and consumers discuss the level and scope of resilience needed, how to decide what investments are most impactful, and roles of local, state and federal officials.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Universal Utility Data Exchange (UUDEX) Functional Design Requirements: Cybersecurity of Energy Delivery Systems Research and Development

This document provides a set of high-level functional design requirements for Universal Utility Data Exchange (UUDEX). These requirements include a set of use cases, data exchanges supported by UUDEX, both for grid operations and for cyber security data, functional requirements for data exchange, data models used by UUDEX, data exchange architectures, and security considerations. These functional design requirements are intended to be used in more detailed design documents.

97 MATHEMATICS AND COMPUTING↗

Practical applications of the sigma factor alarm method within alpha CAMs utilizing either ROI, tail-fitting, or peak-fitting algorithms

Some test must be applied to the low-level count data from alpha continuous air monitors (CAMs) to determine if the count is statistically significant (i.e., significantly above background). The test should also automatically account for different levels of background (i.e., different ambient radon progeny concentrations). In other words, the method should be as sensitive as possible, automatically desensitizing when required, yet in such a manner as to not exceed some previously-chosen acceptable false-alarm rate. The test that has been historically utilized within many alpha CAMs to accomplish these goals is the so-called sigma factor approach.

61 RADIATION PROTECTION AND DOSIMETRY↗

Development and refinement of an in situ ‘molecular microscope’ utilizing ultrahigh resolution mass spectrometry

The ability to elucidate complex metabolic behavior of living organisms in situ and with cellular resolution is a bioanalytical grand challenge that is yet to be realized. Mass spectrometry imaging (MSI) using laser ablation electrospray ionization mass spectrometry (LAESI) has recently been demonstrated, and holds promise for direct spatially resolved molecular profiling in a variety of living systems of DOE relevance (e.g., plant leaf, stem, and root tissue). The LAESI MSI approach has revealed cell-to-cell heterogeneity of metabolites within living plant tissue, in a multiplexed fashion and without the need for labeling. Cellular resolution by in situ, ambient pressure MSI methods are far from routine, however, and have inadequate spatial resolution for many biological questions of interest. We propose to develop next-generation LAESI approaches, using advanced fiber optics and transmission-based geometries, in efforts to attain dynamic bioanalysis of living systems at better than 20 µm lateral resolution. In parallel with LAESI innovations, attendant increases in sensitivity and dynamic range of the mass spectrometer system will also be necessary for detection of the limited amount of material being ionized. To respond to this need, a new, high magnetic field (21 Tesla) Fourier Transform Ion Cyclotron Resonance (FTICR) MS at the EMSL/PNNL will be coupled with the newly developed LAESI source. This mass spectrometer, currently being assembled, will be one of only two such systems in the world, and the only one in a DOE laboratory or user facility. Fundamentally, all key figures of merits of FTICR MS performance improve with increased magnetic field strength, providing the ability to achieve unparalleled molecular specificity (near unequivocal molecular constituent identification) at the highest possible mass resolving power and sensitivity. The work proposed here will greatly increase the utility of this FTICR MS instrument, providing unique capabilities to support BER-relevant science. The research plan is comprised of three tasks, two of which are directed by the academic leads (University of Missouri and George Washington University), and one of which will be performed in conjunction with the BER user facility at EMSL/PNNL. In task 1, advancements of the LAESI technology will be achieved, with oversight and leadership of Professor Akos Vertes of George Washington University. In task 2, incorporation of this ion source with EMSL’s new 21T FTICR MS system will be undertaken, supplemented by global omics measurements and calibrated against more conventional MSI platforms also available at EMSL (Drs. Pasa-Tolic, Anderton, and Koppenaal team). In the final task, the resultant innovations and advancements will be tested and validated by addressing important BER relevant science questions on model systems of interest under the direction of Professor Gary Stacey of the University of Missouri. This research follows on key recommendations of the recent BER “Research in Sustainable Bioenergy” report that, for example, stressed that “The design of sustainable biofuel systems requires knowledge about key plant-microbe-environment interactions that provide a range of ecosystem services.” This task will focus on validation of the instrumentation developed through this proposal, advertising this capability to the community through demonstration and, finally, discovering new biology relevant to the BER mission. This final objective will make use of Setaria viridis, a model C4 grass species, as well as switchgrass and sorghum, two promising biofuel crops. Specifically, we will demonstrate applicability to plant-microbe rhizosphere interactions focusing on the biological nitrogen fixation by monitoring metabolic changes in real-time with nutrient, growth condition, and other perturbations.

09 BIOMASS FUELS↗

Influence Metrics for Value and Utility Functions

Methods are proposed to measure the sensitivity of utility or value function to the variations of attribute values for Multi-Criteria Decision Analyses that are based on functions that cannot be expressed as a weighted sum of the attribute values. These measures, called factor Influence Metrics, can be used to examine the characteristics of the option scoring algorithm and help verify the algorithm is consistent with decision makers value structure and processes.

97 MATHEMATICS AND COMPUTING↗

Extraction of Mercury Utilizing 3D Printed Media-Mercury Extraction Coalescer (MEC)

This project was undertaken to address the concern of mercury species present in chemical reprocessing facilities and environmental remediation sites. Typical elemental mercury removal is performed by steam stripping. As efficient as this process is, the vaporized elemental mercury is often condensed along with acidic condensate. The acidic conditions re-dissolve the elemental mercury, transferring it back into the aqueous stream, and undoing the energy-intensive steam stripping process. This project looked to design and produce a 3D printed component to act as a mercury vapor/liquid coalescer utilizing structural and chemical features to segregate elemental mercury from an aqueous solution or process offgas and improving elemental mercury retention and removal from the recirculated condensate stream. The aim of this project is to take inspiration from nature, for example the lotus leaf, and the advantage of advanced manufacturing techniques, in this case 3D printing, to produce a functional solution to a serious environmental issue, the accumulation of elemental mercury in aqueous environments.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Extraction of Mercury Utilizing 3D Printed Media – Mercury Extraction Coalescer (MEC) (Revision 1)

This project was undertaken to address the concern of mercury species present in chemical reprocessing facilities and environmental remediation sites. Typical elemental mercury removal is performed by steam stripping. As efficient as this process is, the vaporized elemental mercury is often condensed along with acidic condensate. The acidic conditions re­-dissolve the elemental mercury, transferring it back into the aqueous stream, and undoing the energy-intensive steam stripping process. This project looked to design and produce a 3D printed component to act as a mercury vapor/liquid coalescer utilizing structural and chemical features to segregate elemental mercury from an aqueous solution or process offgas and improving elemental mercury retention and removal from the recirculated condensate stream.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Adaptive RAS/SPS System Settings for Improving Grid Reliability and Asset Utilization through Predictive Simulation and Controls

Remedial Action Schemes (RAS) or Special Protection Schemes (SPS) are used throughout the bulk transmission system as a non-wires method of increasing transmission transfer capability. However, as the population grows within the Western Interconnection, more power needs to be transferred with less ability to build lines. This leads to a greater number of RAS, and the subsequent interaction between these disparate schemes can have unintended consequences. While the large number of RAS within the Western Electricity Coordinating Council (WECC) protect for different things, which can range from the violation of thermal limitations to transient stability issues, they can be described by common methods of operation. In order to understand these methods, a survey was sent out to members of the WECC Modeling & Validation Working Group (MVWG). The response received provides a necessary base in which to understand and build models that can be used within WECC. This report provides information on the survey results regarding RAS/SPS modeling practices for planning and operational studies within the WECC footprint, which is foundational for on-going and future work on RAS. Pacific Northwest National Laboratory (PNNL) and its industry partners are developing innovative methods for adaptively setting RAS parameters based on realistic and near real-time operational conditions to improve power grid reliability and grid asset utilization.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Momentary Cessation: Improving Dynamic Performance and Modeling of Utility-Scale Inverter Based Resources During Grid Disturbances

Sandia National Laboratories worked with NERC staff to provide stakeholder guidance in responding to a May 2018 NERC alert regarding dynamic performance and modeling issues for utility-scale inverter-based resources. The NERC alert resulted from event analyses for grid disturbances that occurred in southern California in August 2016 and October 2017. Those disturbances revealed the use of momentary cessation of transmission connected inverter-based generation- a short time period when they ceased to inject current into the grid, counter to desired transmission operation. The event analyses concluded that, in many cases, the Western Interconnection system models used to determine planning and operating criteria do not reflect the actual behavior of solar plants, resulting in overly optimistic planning assessments and substandard operational responses. This technical report summarizes the gaps between the models and actual performance that were observed at those times, and the guidance that Sandia and NERC provided to owners of solar PV power plants, transmission planners, transmission operators and planning/reliability coordinators to modify existing models to reflect that actual performance

24 POWER TRANSMISSION AND DISTRIBUTION↗