Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transparency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Highly Size-Selective Water-Insoluble Cross-Linked Carboxymethyl Cellulose Membranes

Carboxymethyl cellulose (CMC) membranes have strong potential for application as molecular-scale separators. For this study, stable CMC membranes were fabricated with aluminum chloride (AlCl{sub 3}) and iron(III) chloride (FeCl{sub 3}) serving as cross-linkers. The resulting CMC-Al and CMC-Fe membranes were optically transparent and water-insoluble with sufficient mechanical strength for practical applications. The water permeation flux through the membranes was directly proportional to the operating pressure. With just a 10-fold increase in the molecular weight from 60 Da (urea) to 604 Da (bordeaux S), the effective diffusion coefficient (D{sub eff}) of the CMC-Al membrane increased 56-fold, and that of the CMC-Fe membrane increased 3500-fold. This significant correlation between D{sub eff} on molecular size indicated that the sizes of the mass transfer channels through the membrane were strictly monodisperse, in the range of molecular sizes that were tested.

36 MATERIALS SCIENCE↗
DOE OSTI2019

A Simple Approach for the Synthesis of Cellulose Nanofiber Reinforced Chitosan/PVP Bio Nanocomposite Film for Packaging

The development of chitosan-based food packaging film has been increasing due to its wider availability, biodegradability, low-cost, and renewability. The purpose of this study was to develop cellulose nanofibers (CNFs) reinforced Chitosan/PVP(CHP) green bio nanocomposite film by solvent casting method with enhanced barrier and mechanical property. CNFs of dimension 9–11 nm and 100–200 nm were extracted from jute fibers by directly treating it with HNO{sub 3}–NaNO{sub 2} mixture. Bio nanocomposite films were synthesized with various concentrations of CNFs and evaluated using SEM, TGA/DTG and XRD to analyze the morphology, thermal behavior and crystallinity of bio nanocomposite films. SEM analysis revealed the uniform dispersion of CNFs in CHP matrix. Thermal stability of prepared bio nanocomposite films was improved with the loading of 5 wt% of cellulose nanofibers. ATR(FT-IR) spectra shows physical interaction between all the components of bio nanocomposite film. The bio nanocomposite films were also characterized for physical property like thickness, mechanical testing and barrier properties. The addition of CNFs significantly enhanced the mechanical property of bio nanocomposite films. Furthermore, water and oxygen transmission rate of bio nanocomposite film decreased with the increase in CNFs concentration. Overall the performed studies confirmed, the use of CNFs in polymer matrix makes it possible to produce a flexible, transparent, thermally stable bio nanocomposite film with enhanced mechanical and barrier properties for food packaging applications.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Intrinsic Quantum Dissipation in Superconducting Weak Links

We evaluate the frequency spectrum for an intrinsic quantum dissipative environment for the Josephson phase φ formed by subgap Andreev bound states in superconducting weak links. We also analyze the problem of macroscopic quantum tunneling (MQT) of φ in highly transparent weak links and identify several MQT regimes. Within the exponential accuracy, we derive the expression for the supercurrent quantum decay rate both at low temperatures and in the vicinity of the quantum-to-classical crossover.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2018

Magnetism and Optical Property of Mn-Doped Monolayer CrSi{sub 2} by First-Principle Study

We investigate magnetism and optical properties of intrinsic and Mn-doped monolayer CrSi{sub 2} using the first-principle methods based on density functional theory. The results show that both monolayer CrSi{sub 2} sheets are metallic and ferromagnetic (FM) that hold promise in future 2D magnetic devices. In spite the slight reduction of the total magnetic moment of system after Mn doping in monolayer CrSi{sub 2}, the formation energies of ferromagnetic CrSi{sub 2} are also reduced. So, Mn doping in monolayer CrSi{sub 2} can have more promising applications in spintronics and magnetic storage. The optical properties of monolayer CrSi{sub 2}, including the absorption spectra, reflectivity, refractive index, loss function and dielectric function are also calculated. The intensity of reflectivity in far-infrared ranges is enhanced and real part n of refractive index decreases after Mn doping. The real part n of the refractive index is nearly constant (˜1) beyond 13 eV indicating that monolayer CrSi2 is vacuum like and fully transparent.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Development of Room-Temperature Ferromagnetism in Nanocomposite CdO Codoped with Al and Gd: Treatment in Hydrogen Atmosphere

Cadmium oxide codoped with Al and Gd ion powders was synthesised by thermal codecomposition of a mixture of complexes of cadmium acetate dihydrate, gadolinium acetate hydrate, and aluminum nitrate nonahydrate. The mass ratio of Al/Cd was fixed while the mass ratio of Gd/Cd varied systematically. The purpose of the present study is to synthesise and study the transparent conducting oxide (TCO) CdO powder having room-temperature ferromagnetic (RT-FM) properties. To realize that purpose, the synthesised Al/Gd-codoped CdO powder was annealed under hydrogen gas with certain conditions. The X-ray diffraction (XRD) method confirmed the formation of a single nanocrystalline structure; thus, both Al/Gd ions were incorporated into CdO lattice forming solid solutions. Magnetic measurements revealed that some of the doped CdO powders gained paramagnetic (PM) properties where the susceptibility increases with increasing dopant Gd content; the measured effective magnetic moment of dopant Gd{sup 3+} was around 8 μ{sub B}. Furthermore, the magnetic energy of the created RT-FM of the codoped CdO samples by hydrogenation was found to be dependent on the Gd% doping level. For hydrogenated CdO powder doped with 3% Gd, the coercivity (H{sub c}) was 195.9 Oe, the remanence (M{sub r}) was 0.77 memu/g, the saturation magnetisation (M{sub s}) was 5.05 memu/g, and the energy product (U{sub m}) was 150.6 merg/g. Thus, the possibility of production of TCO CdO with RT-FM, where magnetic characteristics can be tailored by doping and post treatment under H{sub 2} gas, was proven. Thus, a new potential candidate to be used as a dilute magnetic semiconductor (DMS) was successfully synthesised.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2019

The Additive Approximation for Heat Transfer and for Stability Calculations in a Multi-filamentary Superconductor - part A

This paper addresses the applicability of the “additive approximation” of total thermal conductivity in heat transfer and in superconductor stability calculations. If cases (a), (b) and (c) denote total (conductive plus radiative), or only conductive or only radiative heat flux, respectively, each flux q-dot calculated with Fourier’s conduction law using the corresponding thermal conductivity (λ{sub a}, λ{sub b}, λ{sub c}), the additive approximation would be confirmed if the heat flux difference Δ q-dot = q-dot {sub a}− q-dot {sub b}− q-dot {sub c}, at any position of an investigated object, and at any time, converges to zero. This is not trivial because of the strong, non-linear temperature dependence of the radiation component. Heat transfer calculations including radiative transfer are presented in this paper, first for simple, homogeneous, thin film test samples and later for a multi-filamentary BSCCO 2223 superconductor. The simulated heat sources either result from a sudden increase of conductor boundary temperature or from flux flow and Ohmic resistances in the superconductor under a disturbance (like transport current exceeding critcal current density). The conductors, though very thin, are non-transparent to mid-IR radiation. Validity of the additive approximation is critical for superconductor stability against quench. Based on the applied numerical scheme, a hypothesis is suggested concerning correlation of the results of the simulation (the “numerical space”) with the experimental situation (the “physical reality”): Non-convergence of the numerical scheme might tightly be correlated with occurrence of a quench in the simulated superconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Hydrogen-Induced Room-Temperature Ferromagnetism in Carbon-Incorporated CdO

Carbon-incorporated CdO (CdO–C) nanocrystallites were synthesised by sol–gel technique including sucrose (C{sub 12}H{sub 22}O{sub 11}) as a source of carbon ions. This investigation aimed to disclose the necessary synthesis conditions to create room-temperature ferromagnetic (RT-FM) properties in host CdO–C system. Therefore, structural, optical and magnetic properties of CdO–C samples were systematically investigated. The X-ray diffraction (XRD) method was used to study the structural properties, and the diffuse reflection spectroscopy (DRS) method was used to study the optical properties. It was established that post-annealing of synthesised samples in H{sub 2} atmosphere could create RT-FM. The experimental results were discussed in the framework of previous studies of other transparent conducting oxides (TCOs). The magnetic properties of CdO–C system were studied here for the first time. It was found that CdO–C nanopowder of tailored FM properties could be used as a candidate for TCO applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

C{sup ∗}-Quadratic Quantization

In the first part of the paper we introduce a new parametrization for the manifold underlying quadratic analogue of the usual Heisenberg group introduced in Accardi et al. (Infin Dimens Anal Quantum Probab Relat Top 13:551–587, 2010) which makes the composition law much more transparent. In the second part of the paper the new coordinates are used to construct an inductive system of ∗-algebras each of which is isomorphic to a finite tensor product of copies of the one-mode quadratic Weyl algebra. We prove that the inductive limit ∗-algebra is factorizable and has a natural localization given by a family of ∗-sub-algebras each of which is localized on a bounded Borel subset of ℝ. Moreover, we prove that the family of quadratic analogues of the Fock states, defined on the inductive family of ∗-algebras, is projective hence it defines a unique state on the limit ∗-algebra. Finally we complete this ∗-algebra under the (minimal regular) C{sup ∗}-norm thus obtaining a C{sup ∗}-algebra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Engaging stakeholders to assess landscape sustainability

There is widespread consensus about the need for landscape sustainability but little agreement about how to define or measure it. Objectives: The aim of the paper is to present a systematic approach for measuring progress toward landscape sustainability goals. Methods: The approach was developed based on existing literature and our experiences in applying the approach to support more sustainable agricultural landscapes. Examples applying this approach are summarized for case studies in the United States (U.S.) and Mexico. Results: The approach has six steps: the scope and objectives of the assessment are determined based on the particular context; indicators that alert pending concerns are selected and prioritized based on utility and relevance; baselines and targets are established for each indicator, and scenarios for consideration are determined; the indicator values are obtained and evaluated; trends in and tradeoffs among indicator values are analyzed; and good practices are developed, applied, and assessed. Conclusions: Insights gained from applying this approach suggest that designing sustainable landscapes depends on stakeholder engagement, effective communication, transparency and trust, timely monitoring, and continual improvement. Iterative application of the assessment approach builds capacity and promotes continual improvements in management practices, thus enabling timely responses to changing conditions while still progressing toward a set of locally defined goals.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

The transmittance and sheet resistance of chemically and heat reduced graphene oxide film

The graphene oxide (GO) sheets were prepared from Hummer’s method. The reduced process is important to graphene related materials for widely functional use in many photoelectric fields. Chemically and heat reduced treatment are carried out in this research and the electrical and optical properties of reduced GO films are measured. The size of GO sheets was examined by transmission electron microscopy with a size of about 5–6 µm. The chemically converted graphene (CCG) film are made by spin coating method. We used different GO concentration and different spin coating times to investigate the properties of graphene transparent conductive films. As the decrease of the GO concentration of solution and the times of spin coating, the transmittance is higher. The electrical property of the mixing of GO and CCG is more stable than the GO sheets only, this is discussed in this research and it is cause by the stacking condition of sheets. The conductivity of reduced graphene oxide film come from GO is lower than that come from CCG, we suppose that is because that the overlapping is less (i.e. film-forming ability) in the former, the transmittance and sheet resistance are 56 T% and 50 kohm/sq.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2018

Broadband LWIR and MWIR absorber by trapezoid multilayered grating and SiO{sub 2} hybrid structures

A broadband metamaterial absorber with high absorption simultaneously in mid-wave infrared (MWIR) and long-wave infrared (LWIR) was proposed. In the MWIR, the absorption higher than 0.8 is from 4 to 6.3 µm, while the absorption in the LWIR is from 8.7 and 9.6 µm. The absorber is insensitive to the incident angle. The broadband absorption in the MWIR is due to the slow-light effect of the trapezoid multilayered grating structure. And the broadband absorption in the LWIR is due to the phonon polariton resonant of trapezoid SiO{sub 2} layer. In the broadband high absorption region, the atmosphere is transparent, which may greatly promote the practical application of the absorber in double-color IR imaging, detecting, infrared stealth and thermal emitting.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

The numerical investigation of colliding optical solitons as an all-optical-gate using the method of Lines

The bidirectional propagation and collision of counter-propagating optical solitons in a two-level resonant medium is analyzed. For sufficiently short duration of the pulses and sufficiently high power levels, self-induced transparency allows the pulses to propagate without losses at anomalously low velocities. Here, we use an extended semiclassical approach, called Maxwell–Bloch model. The quantization of the electromagnetic field is neglected, however, a full quantum mechanical formulation is used to describe the behavior of the matter. The numerical simulations are performed by using the method of lines. For improved accuracy, spline interpolation of the fields is introduced. Results are presented to demonstrate the use of soliton collision for all-optical switching, in particular, as OR- and XOR-gates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Ultra-compact low loss electro-optical nanobeam cavity modulator embedded photonic crystal

In this paper, a hybrid electro-optical modulator based on a one-dimensional photonic crystal nanobeam cavity is proposed. The main component of the cavity builder is the indium–tin–oxide that is a transparent conductive oxide. The proposed structure is used to minimize optical losses and also to have a high-quality factor with a tunability from the distributed feedback system. The proposed modulator has a wide range of resonant tunable in a footprint of 1.892 μm{sup 2}. This structure has the ability to shift the wavelength of 1.55 μm using a very small voltage 0.1 V. Simulation results show that the proposed structure has an insertion loss of 0.027 dB, extension ratio 3.484 dB, 119.89 GHz modulation speed, and 0.59 aJ/bit modulation energy. By comparing the proposed method parameters and other modulators based on the one-dimensional photonic crystal nanobeam cavity, a significant improvement in modulation voltage, insertion losses, energy consumption, and footprint have been observed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2019

Growth and characterization studies on L-threoninium p-toluenesulfonate monohydrate crystal

L-threoninium p-toluenesulfonate monohydrate (LTPTM) (IUPAC name: 1-carboxy-2-hydroxypropan-1-aminium 4-methylbenzenesulfonate monohydrate), a new organic nonlinear optical (NLO) crystal, is grown by solution growth method at room temperature. It crystallizes in monoclinic crystal system with noncentrosymmetric space group P2{sub 1}. Presence of NH{sub 3}{sup +} and SO{sub 3}{sup −} vibrations in IR and Raman spectra confirms the formation of LTPTM molecule. The {sup 1}H and {sup 13}C nuclear magnetic resonance (NMR) spectra establish the molecular structure. In the {sup 1}H–NMR spectrum of LTPTM, the chemical shift corresponding to H-SO{sub 3} (6.57 ppm) of p-toluenesulfonic acid monohydrate is absent. This is due to the fact that the hydrogen in H–SO{sub 3} is released and combines with the amine group of L-threonine. This ensures the formation of LTPTM molecule. The O5-H5A…O3 intermolecular interaction is also established by the observed upfield shift of COOH group in LTPTM molecule. The crystal is thermally stable up to 73 °C. LTPTM is transparent from 235 to 1100 nm. The second harmonic generation (SHG) conversion efficiency of LTPTM is 0.77 times that of KDP. Third order nonlinear optical susceptibility (χ{sup (3)}) of the title crystal is 1.3035 × 10{sup −7} esu which is higher than some reported NLO crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Influence of fluorine doped CdO thin films by an simplified spray pyrolysis technique using nebulizer

The Cadmium oxide (CdO) and Fluorine (F) doped CdO thin films were effectively synthesized on glass substrates for different F doping concentrations (2, 4, 6, 8 at.%) using nebulized spray pyrolysis technique. The XRD analysis showed that all the films were polycrystalline having cubic structure with (111) preferential orientation. It was seen from the SEM photographs that the doping causes remarkable changes in the surface morphology. EDAX analysis clearly confirmed that the presence of expected elements cadmium, oxygen and fluorine in the final product, in appropriate proportions. The electrical study showed that the minimum resistivity value of 1.9 × 10{sup −4} Ω cm with notable higher values of carrier concentration and mobility was achieved for 6 at.% of CdO:F film. Optical study exhibited that the band gap value of CdO film increases gradually with the increase in F-doping concentration, reaching maximum band gap value of 2.61 eV at 6 at.% and starts decreasing thereafter. Photoluminescence spectra depicted that the intensity of the emission peaks was significantly varied with doping concentrations. The high transparency, wide band gap energy, enhanced electrical properties and light sensitivity had been obtained infer that F-doped CdO thin films which find application in optoelectronic applications. Graphical abstract: .

36 MATERIALS SCIENCE↗
DOE OSTI2019

Dyakonov surface waves at the interface of nanocomposites with spherical and ellipsoidal inclusions

The dispersion properties of different types of surface electromagnetic waves which are supported by the interface of two nanocomposite materials with inclusions of different shape are studied theoretically and numerically. Both nanocomposites are made of doped n-type semiconductor inclusions which are evenly distributed in a transparent dielectric matrix. First nanocomposite contains semiconductor inclusions of spherical shape and can be represented as isotropic material with scalar effective dielectric permittivity. Second nanocomposite contains semiconductor inclusions of ellipsoidal shape and can be modeled as a uniaxial anisotropic crystal with two different principal effective permittivity components. Influence of physical and geometrical parameters of the nanocomposites on dispersion properties of surface waves is studied. It is shown that when dissipations in the semiconductor inclusions are taken into account the angular spectrum of Dyakonov surface wave existence becomes wider, and several dispersion curves of surface modes can simultaneously exist.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Effects of insertion loss, laser profile and inhomogeneity of dots distribution on properties of all-optical modulator based on GaN/AlN quantum dots

This paper reports the effects of insertion loss, laser profile and inhomogeneity of dots distribution on properties of an all-optical modulator based on spherical quantum dot. The aim of this paper is to give a quantitative description for the variation of main properties of an all-optical quantum dot modulator such as, absorption, transmission and modulation depth regard to insertion loss, laser profile and inhomogeneity of dots. To realize these points, first, we extract the field distribution in optical fiber and channel waveguide (modulator) which are defined by their structure characteristics and boundary conditions. Using the electric field equations, input coupling efficiency and insertion loss and also role of laser profile are observable. Finally we investigate the effect of size distribution and inhomogeneity of quantum dots on the modulator performance. In this structure we used electromagnetically induced transparency (EIT) in GaN/AlN structure, associated with inter-sublevel transitions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Characterization of CuO/n–Si pn junction synthesized by successive ionic layer adsorption and reaction method

Transparent conducting Copper oxide CuO thin films were successfully synthesized on glass and n-type Silicon substrates by successive ionic layer adsorption and reaction method. The crystal structure, surface texture, optical and electrical properties were studied. The results revealed that the deposited CuO thin films at different cycles number (5, 10, 15), have polycrystalline structure nature with monoclinic phase, and the crystallite size increases with the increase of cycles number. The average roughness and the root mean square values increase with increasing cycles number. The optical energy band gap and Urbach energy was decrement from 2.33 eV and 1.2 eV for 5 cycles to 2.1 eV and 0.82 eV for 15 cycles. The electrical properties of Ni/CuO/n–Si pn junction were studied using current–voltage (I–V) measurements. The barrier heights (Φ{sub B}) of Ni/CuO/n–Si thin films were calculated and its values are (0.716, 0.736, 0.723) eV, for 5, 10 and 15 cycles respectively with an applied bias voltage of 3 V.

77 NANOSCIENCE AND NANOTECHNOLOGY↗