Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transit Solutions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Large isotropic negative thermal expansion above a structural quantum phase transition

Perovskite structured materials contain myriad tunable ordered phases of electronic and magnetic origin with proven technological importance and strong promise for a variety of energy solutions. An always-contributing influence beneath these cooperative and competing interactions is the lattice, whose physics may be obscured in complex perovskites by the many coupled degrees of freedom which makes these systems interesting. Here we report signatures of an approach to a quantum phase transition very near the ground state of the nonmagnetic, ionic insulating, simple cubic perovskite material ScF3 and show that its physical properties are strongly effected as much as 100 K above the putative transition. Spatial and temporal correlations in the high-symmetry cubic phase determined using energy- and momentum-resolved inelastic X-ray scattering as well as X-ray diffraction reveal that soft mode, central peak and thermal expansion phenomena are all strongly influenced by the transition.

Handunkanda, Sahan Uddika↗

Scaling Behavior of Thermally Driven Fractures in Deep Low‐Permeability Formations: A Plane Strain Model With 1‐D Heat Conduction

Abstract Injection of cold fluids through/into deep formations may cause significant cooling, thermal stress, and possible thermal fracturing. In this study, the thermal fracturing of low‐permeability formations under one‐dimensional heat conduction was investigated using a plane strain model. Dimensionless governing equations, with dimensionless fracture length , aperture , spacing , time , and effective confining stress , were derived. Solution of single thermal fracture was derived analytically, while solution of multiple fractures with constant (or dynamic) spacing were obtained using the displacement discontinuity method (and stability analysis). For single fracture, increases nonlinearly with and then transitions to scaling law , indicating that late‐time fracture length increases linearly with the square root of cooling time. For constantly spaced fractures, deviates from the single‐fracture solution at a later for a larger , showing slower propagation under inter‐fracture stress interaction . For dynamically spaced fractures, fracture arrest induced by stress interaction was determined by the stability analysis; the fully transient solution provides evolution of dimensionless fracture length, spacing, aperture, and pattern; a similar scaling law, with , obtained shows the effect of both stress interaction and fracture arrest. The solution and scaling law provide fast predictions for all reservoir and cooling conditions using (single) model parameter . Application to a geothermal site with demonstrates that thermal fractures reach 0.67, 6.25, and 78.00 m in length, 0.49, 2.30, and 13.00 m in spacing, and 0.43, 2.09, and 12.19 mm in aperture at 1, 100, and 10,000 days.

Chen, Bin↗

Exploring structural transitions at grain boundaries in Nb using a generalized embedded atom interatomic potential

The advancement in experimental techniques, like the atom probe tomography and high resolution electron microscopy, is fueling interest in studying structural transformations of grain boundaries in metal and alloys to uncover correlations between mechanical properties and solute or impurity segregation to grain boundaries. Atomistic modeling is an important tool that can pinpoint the intricate dynamics of grain boundary phase transitions, but the lack of accurate interatomic potentials needed to simulate the complex dynamics of grain boundary structural transitions and identify different metastable phases has been the bottleneck. To this end, we use niobium as a model body centered cubic (BCC) metal and develop an interatomic potential to study grain boundary phase transitions. The potential for Nb is based on a generalization of the embedded atomic method potential and has sufficient flexibility to learn complex energy landscapes using a small set of training structures. We systematically test and validate the using data from ab initio density functional theory calculations and experiments. Using this potential, we calculate energies of multiple symmetric-tilt grain boundaries spanning a wide range of misorientation angles. Additionally, we explore different metastable structures of the Σ 27(552) [$1\overline{1}0$] grain boundary and use molecular dynamic simulations to study the coexistence of metastable phases and grain boundary transitions at finite temperature.

36 MATERIALS SCIENCE↗

Atomic density functional and diagram of structures in the phase field crystal model

The phase field crystal model provides a continual description of the atomic density over the diffusion time of reactions. We consider a homogeneous structure (liquid) and a perfect periodic crystal, which are constructed from the one-mode approximation of the phase field crystal model. A diagram of 2D structures is constructed from the analytic solutions of the model using atomic density functionals. The diagram predicts equilibrium atomic configurations for transitions from the metastable state and includes the domains of existence of homogeneous, triangular, and striped structures corresponding to a liquid, a body-centered cubic crystal, and a longitudinal cross section of cylindrical tubes. The method developed here is employed for constructing the diagram for the homogeneous liquid phase and the body-centered iron lattice. The expression for the free energy is derived analytically from density functional theory. The specific features of approximating the phase field crystal model are compared with the approximations and conclusions of the weak crystallization and 2D melting theories.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase structure, dielectric properties, and relaxor behavior of (K{sub 0.5}Na{sub 0.5})NbO{sub 3}-(Ba{sub 0.5}Sr{sub 0.5})TiO{sub 3} lead-free solid solution for high temperature applications

The (1-x)(K{sub 0.5}Na{sub 0.5})NbO{sub 3}-x(Ba{sub 0.5}Sr{sub 0.5})TiO{sub 3} (KNN-BST) solid solution has been synthesized by conventional solid-state sintering in order to search for the new lead-free relaxor ferroelectrics for high temperature applications. The phase structure, dielectric properties, and relaxor behavior of the (1-x)KNN-xBST solid solution are systematically investigated. The phase structure of the (1-x)KNN-xBST solid solution gradually changes from pure perovskite phase with an orthorhombic symmetry to the tetragonal symmetry, then to the pseudocubic phase, and to the cubic phase with increasing addition of BST. The 0.90KNN-0.10BST solid solution shows a broad dielectric peak with permittivity maximum near 2500 and low dielectric loss (<4%) in the temperature range of 100-250 deg. C. The result indicates that this material may have great potential for a variety of high temperature applications. The diffuse phase transition and the temperature of the maximum dielectric permittivity shifting toward higher temperature with increasing frequency, which are two typical characteristics for relaxor ferroelectrics, are observed in the (1-x)KNN-xBST solid solution. The dielectric relaxor behavior obeys a modified Curie-Weiss law and a Vogel-Fulcher relationship. The relaxor nature is attributed to the appearance of polar nanoregions owing to the formation of randon fields including local electric fields and elastic fields. These results confirm that the KNN-based relaxor ferroelectrics can be regarded as an alternative direction for the development of high temperature lead-free relaxor ferroelectrics.

36 MATERIALS SCIENCE↗

Assessment of a transitional boundary layer theory at low hypersonic Mach numbers

An investigation was carried out to assess the accuracy of a transitional boundary layer theory in the low hypersonic Mach number regime. The theory is based upon the simultaneous numerical solution of the boundary layer partial differential equations for the mean motion and an integral form of the turbulence kinetic energy equation which controls the magnitude and development of the Reynolds stress. Comparisions with experimental data show the theory is capable of accurately predicting heat transfer and velocity profiles through the transitional regime and correctly predicts the effects of Mach number and wall cooling on transition Reynolds number. The procedure shows promise of predicting the initiation of transition for given free stream disturbance levels. The effects on transition predictions of the pressure dilitation term and of direct absorption of acoustic energy by the boundary layer were evaluated.

Shamroth, S. J.↗

Near-Body Mesh Adaption for Transitional Flows Using OVERFLOW

Accurate modeling of boundary-layer transition is an important aspect of developing greener air transport technologies. In that regard, transition models based on auxiliary transport equations offer a robust approach that is easily integrated into the Reynolds-averaged Navier-Stokes (RANS) solvers. Recent workshops under NATO and AIAA have identified the verification of transport-equations-based transition modeling as a critical aspect of reducing the scatter between the predictions of different CFD codes. Follow-on work has highlighted the need for highly dense grids to achieve an asymptotic convergence of transition related flow metrics. The present work examines the role of automatic near-body mesh adaptation capability in the NASA OVERFLOW CFD solver to enable verification studies in an efficient manner, and for establishing best practices for designing grids for the RANS-based transition models. A sensor function relevant to the Langtry-Menter \gamma-Re_{\theta t}\ transition model has been identified and used for error-based mesh adaptation for canonical configurations comprising a flat plate, and the S809 and NLR-7301 airfoils. The efficacy of the mesh adaptation approach is assessed for flow conditions involving multiple transition scenarios such as natural transition, separation-induced transition, and shock-induced transition. The results from this exploratory study indicate that the meshes adapted using the proposed sensor provide solutions that approach the references solutions obtained with uniformly refined hand-crafted meshes, in terms of the chosen metrics, and yield modest yet significant savings in grid count. We also highlight areas for improvement in the grid adaptation methodology within OVERFLOW.

CFD↗

Near-Body Mesh Adaption for Transitional Flows Using OVERFLOW

Accurate modeling of boundary-layer transition is an important aspect of developing greener air transport technologies. In that regard, transition models based on auxiliary transport equations offer a robust approach that is easily integrated into the Reynolds-averaged Navier-Stokes (RANS) solvers. Recent workshops under NATO and AIAA have identified the verification of transport-equations-based transition modeling as a critical aspect of reducing the scatter between the predictions of different CFD codes. Follow-on work has highlighted the need for highly dense grids to achieve an asymptotic convergence of transition related flow metrics. The present work examines the role of automatic near-body mesh adaptation capability in the NASA OVERFLOW CFD solver to enable verification studies in an efficient manner, and for establishing best practices for designing grids for the RANS-based transition models. A sensor function relevant to the Langtry-Menter \gamma-Re_{\theta t}\ transition model has been identified and used for error-based mesh adaptation for canonical configurations comprising a flat plate, and the S809 and NLR-7301 airfoils. The efficacy of the mesh adaptation approach is assessed for flow conditions involving multiple transition scenarios such as natural transition, separation-induced transition, and shock-induced transition. The results from this exploratory study indicate that the meshes adapted using the proposed sensor provide solutions that approach the references solutions obtained with uniformly refined hand-crafted meshes, in terms of the chosen metrics, and yield modest yet significant savings in grid count. We also highlight areas for improvement in the grid adaptation methodology within OVERFLOW.

CFD↗

Influence of Long-Range Forces on the Transition States and Dynamics of NaCl Ion-Pair Dissociation in Water

We study NaCl ion-pair dissociation in a dilute aqueous solution using computer simulations both for the full system with long-range Coulomb interactions and for a well-chosen reference system with short-range intermolecular interactions. Analyzing results using concepts from Local Molecular Field (LMF) theory and the recently proposed AI-based analysis tool “State predictive information bottleneck” (SPIB), we show that the system with short-range interactions can accurately reproduce the transition rate for the dissociation process, the dynamics for moving between the underlying metastable states, and the transition state ensemble. Contributions from long-range interactions can be largely neglected for these processes because long-range forces from the direct interionic Coulomb interactions are almost completely canceled (>90%) by those from solvent interactions over the length scale where the transition takes place. Thus, for this important monovalent ion-pair system, short-range forces alone are able to capture detailed consequences of the collective solvent motion, allowing the use of physically suggestive and computationally efficient short-range models for the dissociation event. Here, we believe that the framework here should be applicable to disentangling mechanisms for more complex processes such as multivalent ion disassociation, where previous work has suggested that long-range contributions may be more important.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accurate localization of Kosterlitz-Thouless-type quantum phase transitions for one-dimensional spinless fermions

We investigate the charge-density wave (CDW) transition for one-dimensional spinless fermions at half band filling with nearest-neighbor electron transfer amplitude t and interaction V. The model is equivalent to the anisotropic XXZ Heisenberg model for which the Bethe Ansatz provides an exact solution. For V>V c =2t, the CDW order parameter and the single-particle gap are finite but exponentially small, as is characteristic for a Kosterlitz-Thouless transition. It is notoriously difficult to locate such infinite-order phase transitions in the phase diagram using approximate analytical and numerical approaches. Second-order Hartree-Fock theory is qualitatively applicable for all interaction strengths, and predicts the CDW transition to occur at V$^{(2)}_{c,2}$≈1.5t. Second-order Hartree Fock theory is almost variational because the density of quasiparticle excitations is small. We apply the density-matrix renormalization group (DMRG) for periodic boundary conditions for system sizes up to 514 sites, which permits a reliable extrapolation of all physical quantities to the thermodynamic limit, apart from the critical region. We investigate the ground-state energy, the gap, the order parameter, the momentum distribution, the quasiparticle density, and the density-density correlation function to locate V c from the DMRG data. In conclusion, tracing the breakdown of the Luttinger liquid and the peak in the quasiparticle density at the band edge permits us to reproduce V c with an accuracy of one percent.

1-dimensional spin chains↗

Baryon and lepton number violating effective operators in a non-universal extension of the standard model

It is well known that non-abelian Yang-Mills theories present non-trivial minima of the action, the so-called instantons. In the context of electroweak theories these instanton solutions may induce violations of baryon and lepton number of the form ΔB = ΔL = n{sub f}, with n{sub f} being the number of families coupled to the gauge group. An interesting feature of these violations is that the flavor structure of the gauge couplings is inherited by the instanton transitions. This effect is generally neglected in the literature. We will show that the inclusion of flavor interactions in the instanton solutions may be interesting in certain theoretical frameworks and will provide an approach to include these effects. In particular we will perform this implementation in the non-universal SU (2){sub l} ⊗SU (2){sub h} ⊗U (1){sub Y} model that singularizes the third family. Within this framework, we will use the instanton transitions to set a bound on the SU (2){sub h} gauge coupling.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Tailoring the Properties of Calcium Aluminate Macro-Defect-Free Cements: From Brittle to Ductile Behavior

Cementitious macro-defect-free (MDF) materials can be obtained processing a mixture of a water-soluble polymer, namely polyvinyl alcohol (PVA) and the calcium aluminate cement. Based on process techniques typical of plastics, the MDF products can be obtained in complex forms and, thanks to the reduced water to cement ratio, w/c, their strength is very high compared to standard cements. However, these materials show both the sensitivity typical of water-soluble polymers, presenting a low glass transition temperature (T{sub g}), and the brittle behavior typical of ceramic materials and therefore low toughness. The aim of this work is to modify the mechanical properties of MDF cements by tuning their unacceptable brittle behavior. Water solution of carboxylate styrene butadiene rubber is used as reactive additives, and different mixture formulations are tested changing the rubber-like content both with respect to the fixed water content and PVA amounts. It is shown that the modifications of the organic phase imply small or negligible effects on paste formation of different recipes as detected by the torque–time responses. From flexural and fracture toughness tests, a wide range of responses was observed, and depending on the particular recipe, the mechanical behavior can be tuned from a brittle to a ductile behavior.

36 MATERIALS SCIENCE↗

Numerical evaluation of the incomplete airy functions and their application to high frequency scattering and diffraction

The incomplete Airy integrals serve as canonical functions for the uniform ray optical solutions to several high frequency scattering and diffraction problems that involve a class of integrals characterized by two stationary points that are arbitrarily close to one another or to an integration endpoint. Integrals of such analytical properties describe transition region phenomena associated with composite shadow boundaries. An efficient and accurate method for computing the incomplete Airy functions would make the solutions to such problems useful for engineering purposes. Here, a convergent series solution form for the incomplete Airy functions is derived. Asymptotic expansions involving several terms were also developed and serve as large argument approximations. The combination of the series solution form with the asymptotic formulae provides for an efficient and accurate computation of the incomplete Airy functions. Validation of accuracy is accomplished using direct numerical integration data.

Constantinides, E. D.↗

Two-dimensional distributed feedback lasers with excitation of TE waves in the active medium

Two-dimensional Bragg resonators with the coupling of TE- and TM-polarised waves are proposed. The selective properties of such resonators are analysed. Within the semiclassical approach, the nonlinear dynamics of laser radiation with a two-dimensional (in the xy plane) distributed feedback is studied, at which TE-polarised waves, propagating in the {+-}z directions, are amplified in the active medium (in particular, based on quantum wells). The latter, on a two-dimensional Bragg structure, are scattered into TM-polarised waves propagating in the {+-}x directions. These partial wave flows do not interact with the active medium but provide the spatial radiation synchronisation. The conditions of the solution self-similarity are obtained with increasing the dimensions of the active medium and the corresponding increase in the integral output power. It is shown that when an additional end mirror is mounted, almost unidirectional radiation coupling can be realised. (resonators)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Orbiter Boundary Layer Transition Prediction Tool Enhancements

Updates to an analytic tool developed for Shuttle support to predict the onset of boundary layer transition resulting from thermal protection system damage or repair are presented. The boundary layer transition tool is part of a suite of tools that analyze the local aerothermodynamic environment to enable informed disposition of damage for making recommendations to fly as is or to repair. Using mission specific trajectory information and details of each d agmea site or repair, the expected time (and thus Mach number) of transition onset is predicted to help define proper environments for use in subsequent thermal and stress analysis of the thermal protection system and structure. The boundary layer transition criteria utilized within the tool were updated based on new local boundary layer properties obtained from high fidelity computational solutions. Also, new ground-based measurements were obtained to allow for a wider parametric variation with both protuberances and cavities and then the resulting correlations were calibrated against updated flight data. The end result is to provide correlations that allow increased confidence with the resulting transition predictions. Recently, a new approach was adopted to remove conservatism in terms of sustained turbulence along the wing leading edge. Finally, some of the newer flight data are also discussed in terms of how these results reflect back on the updated correlations.

Berry, Scott A.↗

Solution-Based Synthesis of Crystalline Silicon from Liquid Silane through Laser and Chemical Annealing

We report a solution process for the synthesis of crystalline silicon from the liquid silane precursor cyclohexasilane (Si 6 H 12 ). Polysilane films were crystallized through thermal and laser annealing, with plasma hydrogenation at atmospheric pressure generating further structural changes in the films. The evolution from amorphous to microcrystalline is characterized using scanning electron microscopy (SEM), atomic force microscopy (AFM), Raman spectroscopy and impedance spectroscopy. A four-decade enhancement in the electrical conductivity is attributed to a disorder-order transition in a bonded Si network. Lastly, our results demonstrate a potentially attractive approach that employs a solution process coupled with ambient post-processing to produce crystalline silicon thin films.

36 MATERIALS SCIENCE↗

Initial Results from the High Fluence UCSB ATR-2 Irradiation

A primary focus of the Department of Energy, Office of Nuclear Energy Light Water Reactor Sustainability Program (LWRSP) is the safe operation of nuclear reactors to extended lifetimes of up to 80 years. One of the primary reactor components of concern is the reactor pressure vessel (RPV), which is increasingly embrittled over time due to damage from high energy neutrons created in the reactor core. Radiation damage leads to the formation of nm-scale precipitates and solute-defect clusters, which result in an increase in the steel's ductile to brittle transition temperature. Transition temperature shifts (TTS) are used to quantify and regulate embrittlement. Extended life operation will subject some RPVs to higher neutron fluences than previously experienced by in-service vessels. Thus, robust prediction methods must be developed that ensure the safety of our nation's fleet of reactors. Current models underpredict embrittlement data from high flux test reactor irradiations at extended life fluences. It has been hypothesized that one reason for this underprediction is the formation of so-called 'Late- Blooming Phase' Mn-Ni-Si precipitates, which form and grow only at high fluence and that are currently not included in regulatory models. Recent research has demonstrated the existence of high volume fractions of intermetallic Mn-Ni-Si precipitate (MNSP) phases at high fluence and have generated significant insight into their character. However, a number of questions remain regarding MNSPs, such as: 1) what alloys are most susceptible to MNSP formation; 2) how is MNSP formation affected by flux (φ), fluence (φt) and irradiation temperature (T{sub irr}); and, 3) how to accurately predict TTS under extended life low flux service conditions? The fact that no two RPVs are exactly the same, both in terms of the steel composition and vessel service conditions, makes these questions particularly difficult to answer. Further, understanding the effect of flux differences between test reactor irradiations and in-vessel service is absolutely critical. Hence, physical models must be developed that predict TTS as a function of alloy solute content and vessel service conditions. A large-scale irradiation designed to develop and validate an extended life embrittlement prediction model was recently completed in the Advanced Test Reactor (ATR) at the Idaho National Laboratory as part of the DOE sponsored Nuclear Scientific User Facilities. This experiment, called the UCSB ATR-2 irradiation, is a collaboration between Oak Ridge National Lab (ORNL) and the University of California, Santa Barbara (UCSB) and is now primarily supported by the DOE Light Water Reactor Sustainability Program. The experiment is designed to investigate the single and combined effects of neutron φ, φt, T{sub irr} and alloy chemistry on precipitate formation, hardening and embrittlement. While postirradiation examinations (PIE) is ongoing, and is expected to take several years to complete, the first preliminary results are presented below. It should also be noted that Rolls-Royce has been a collaborator in UCSB ATR-2 from the start, and there are several other national and international institutions supporting the PIE. (authors)

36 MATERIALS SCIENCE↗

Protein Structural Dynamics Revealed by Time-Resolved X-ray Solution Scattering

One of the most important questions in biological science is how a protein functions. When a protein performs its function, it undergoes regulated structural transitions. In this regard, to better understand the underlying principle of a protein function, it is desirable to monitor the dynamic evolution of the protein structure in real time. To probe fast and subtle motions of a protein in physiological conditions demands an experimental tool that is not only equipped with superb spatiotemporal resolution but also applicable to samples in solution phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗