Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Transfer Process”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

A laser-induced heat flux technique for convective heat transfer measurements in high speed flows

A technique is developed to measure the local convective heat transfer coefficient on a model surface in a supersonic flow field. The technique uses a laser to apply a discrete local heat flux at the model test surface, and an infrared camera system determines the local temperature distribution due to the heating. From this temperature distribution and an analysis of the heating process, a local convective heat transfer coefficient is determined. The technique was used to measure the local surface convective heat transfer coefficient distribution on a flat plate at nominal Mach numbers of 2.5, 3.0, 3.5, and 4.0. The flat plate boundary layer initially was laminar and became transitional in the measurement region. The experimentally determined convective heat transfer coefficients were generally higher than the theoretical predictions for flat plate laminar boundary layers. However, the results indicate that this nonintrusive optical measurement technique has the potential to measure surface convective heat transfer coefficients in high speed flow fields.

Porro, A. R.↗
NASA NTRS1991

A laser-induced heat flux technique for convective heat transfer measurements in high speed flows

A technique is developed to measure the local convective heat transfer coefficient on a model surface in a supersonic flow field. The technique uses a laser to apply a discrete local heat flux at the model test surface, and an infrared camera system determines the local temperature distribution due to the heating. From this temperature distribution and an analysis of the heating process, a local convective heat transfer coefficient is determined. The technique was used to measure the local surface convective heat transfer coefficient distribution on a flat plate at nominal Mach numbers of 2.5, 3.0, 3.5, and 4.0. The flat plate boundary layer initially was laminar and became transitional in the measurement region. The experimentally determined convective heat transfer coefficients were generally higher than the theoretical predictions for flat plate laminar boundary layers. However, the results indicate that this nonintrusive optical measurement technique has the potential to measure surface convective heat transfer coefficients in high-speed flowfields.

Porro, A. R.↗
NASA NTRS1991

Sensor-model in-situ control of the RTM composite process

The paper reports on the use of in situ frequency dependent electromagnetic sensors (FDEMS) and the Loos resin transfer model to select and control the processing properties of an epoxy resin during RTM impregnation and cure. Once correlated with viscosity and degree of cure, FDEMS monitors the advancement of the resin, viscosity, and the impregnation of the fabric, allowing a direct means of monitoring in situ in the mold throughout the fabrication process the effects of time, temperature, vacuum, and pressure.

Kranbuehl, D. E.↗
DOE OSTI2021

Increasing melt efficiency and secondary alloy usage in aluminum die casting

In this project, the focus was to develop thermodynamic and kinetic models for the aluminum melting process involving secondary alloys, refractory materials and flux materials. The major research outcome of this study is 1) the refractory composition of CaO (8-12%), microsilica (1-3%), BaSO 4 and/or BaO (no more than 5%), B 2 O 3 (5%) and Al 2 O 3 (balance) effectively reduced the reactions with liquid Al and alloying/impurity elements and heat transfer during melting and holding process. 2) a flux composition of NaCl-KCl-(1-10%)KAlF 4 exhibited an effective covering effect and prevented the dross formation during melting of Al process. 3) A high Fe (0.44%) content recycled Al alloy with compatible mechanical properties was developed based on the impurities control methods, which provides great potential to replace the commercial structural alloys from primary Al and increase the usage of secondary alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Organizational Principles of Hyporheic Exchange Flow and Biogeochemical Cycling in River Networks Across Scales

Hyporheic zones increase freshwater ecosystem resilience to hydrological extremes and global environmental change. However, current conceptualizations of hyporheic exchange, residence time distributions, and the associated biogeochemical cycling in streambed sediments do not always accurately explain the hydrological and biogeochemical complexity observed in streams and rivers. Specifically, existing conceptual models insufficiently represent the coupled transport and reactivity along groundwater and surface water flow paths, the role of autochthonous organic matter in streambed biogeochemical functioning, and the feedbacks between surface-subsurface ecological processes, both within and across spatial and temporal scales. While simplified approaches to these issues are justifiable and necessary for transferability, the exclusion of important hyporheic processes from our conceptualizations can lead to erroneous conclusions and inadequate understanding and management of interconnected surface water and groundwater environments. This is particularly true at the landscape scale, where the organizational principles of spatio-temporal dynamics of hyporheic exchange flow (HEF) and biogeochemical processes remain largely uncharacterized. This article seeks to identify the most important drivers and controls of HEF and biogeochemical cycling based on a comprehensive synthesis of findings from a wide range of river systems. We use these observations to test current paradigms and conceptual models, discussing the interactions of local-to-regional hydrological, geomorphological, and ecological controls of hyporheic zone functioning. This improved conceptualization of the landscape organizational principles of drivers of HEF and biogeochemical processes from reach to catchment scales will inform future river research directions and watershed management strategies.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Electron Transfer Beyond the Outer Membrane: Putting Electrons to Rest

Extracellular electron transfer (EET) is the physiological process that enables the reduction or oxidation of molecules and minerals beyond the surface of a microbial cell. The first bacteria characterized with this capability were Shewanella and Geobacter, both reported to couple their growth to the reduction of iron or manganese oxide minerals located extracellularly. A key difference between EET and nearly every other respiratory activity on Earth is the need to transfer electrons beyond the cell membrane. The past decade has resolved how well-conserved strategies conduct electrons from the inner membrane to the outer surface. However, recent data suggest a much wider and less well understood collection of mechanisms enabling electron transfer to distant acceptors. This review reflects the current state of knowledge from Shewanella and Geobacter, specifically focusing on transfer across the outer membrane and beyond—an activity that enables reduction of highly variable minerals, electrodes, and even other organisms.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1993

Hybrid rocket combustion study

The objectives of this study of 'pure' or 'classic' hybrids are to (1) extend our understanding of the boundary layer combustion process and the critical engineering parameters that define this process, (2) develop an up-to-date hybrid fuel combustion model, and (3) apply the model to correlate the regression rate and scaling properties of potential fuel candidates. Tests were carried out with a hybrid slab window motor, using several diagnostic techniques, over a range of motor pressure and oxidizer mass flux conditions. The results basically confirmed turbulent boundary layer heat and mass transfer as the rate limiting process for hybrid fuel decomposition and combustion. The measured fuel regression rates showed good agreement with the analytical model predictions. The results of model scaling calculations to Shuttle SRM size conditions are presented.

Strand, L. D.↗
DOE OSTI2022

Enhanced Pool Boiling of Low-Pressure Refrigerants on Round Tubes- An Experimental Evaluation

Pool boiling heat transfer is one of the most effective heat transfer methos and crucial for several energy conversion processes such as electronic cooling, steam generation, water purification and thermal management. Enhancing boiling heat transfer around the tubes enables higher heat flux, which can improve the efficiency and lead to compact heat exchangers. Delaying the onset of critical heat flux (CHF) allows for higher CHFs and protects equipment during anomalous transient conditions. Growing interest in process intensification and delayed CHF has motivated the current study. An experimental approach has been deployed to investigate a potential technique to enhance the pool boiling performance around small diameter tubes by open cell metal foams. The findings for nucleate pool boiling of Novec HFE 7000 on the externally enhanced and smooth tubes are reported. The enhanced tube comprised of compressed aluminum foam brazed around. All the samples were horizontally oriented, and the experiments were performed under ambient pressure conditions. The heat transfer measurements for the smooth tubes were compared with several existing correlations and established the baseline. The preliminary results showed that the aluminum foam effectively enhanced the heat transfer coefficient and delayed the onset of critical heat flux. In addition, the pool boiling process around the round tube sample was visualized from both side and front views to comprehend the heat transfer mechanisms underlying substantial enhancement observed during experiments.

Yang, Cheng-Min↗
DOE OSTI2025

Graphene oxide gluing layer enabling macroscale tribology applications of pristine graphene

In recent studies of two-dimensional (2D) nanomaterial-based solid lubricants, the importance of durability has been emerging for real engineering-scale applications. To achieve this, a transfer layer formation is essential to prevent the wear of the mechanical systems. However, it has been challenging for pristine graphene (PG) to induce a material transfer due to chemical inertness. In this study, we suggest an easy-to-process strategy to promote the huge material transfer of the PG onto the counterpart contacting material. We utilized graphene oxide (GO) as a gluing layer between the PG film and the counterpart contact surface to realize the superior tribological performance. The high interaction energy of the GO from its functional groups makes a contribution to the material transfer of PG, which is unveiled by a systematic analysis of the counterpart contact surface and the wear track. The huge solid transfer layer not only makes a wear-resistant contact interface between the transfer layer and the underlying film by densification and oxidation, but also reduces surface interaction energies, finally resulting in a significant improvement in durability.

graphene oxide (GO)↗
NASA NTRS1991

Analytical modeling and sensor monitoring for optimal processing of polymeric composite material systems

Process simulation models and cure monitoring sensors are discussed for use in optimal processing of fiber-reinforced composites. Analytical models relate the specified temperature and pressure cure cycle to the thermal, chemical, and physical processes occurring in the composite during consolidation and cure. Frequency-dependent electromagnetic sensing (FDEMS) is described as an in situ sensor for monitoring the composite curing process and for verification of process simulation models. A model for resin transfer molding of textile composites is used to illustrate the predictive capabilities of a process simulation model. The model is used to calculate the resin infiltration time, fiber volume fraction, resin viscosity, and resin degree of cure. Results of the model are compared with in situ FDEMS measurements.

Loos, Alfred C.↗
NASA NTRS1974

Radiative relaxation rates and intensities during outer planet entries

Gas properties which can affect outer planetary entry probe radiative heat transfer are reviewed in order to predict the effect of processes such as radiative relaxation, radiative cooling, and equilibrium radiation intensities on entry. These processes are quantified in order to avoid overestimating the radiative transfer by an over simplified approach to the problem. By reducing the uncertainties in the knowledge of these processes, the heatshield weight is minimized by reducing safety factors and performance limits.

Leibowitz, L.↗
NASA NTRS2003

Survivability of Affordable High Temperature Polymer Matrix Composites for Propulsion Engine Components

PMR-type polyimides are regarded as state of the art high temperature polymers, due to their excellent thermo-mechanical properties and thermo-oxidative stability. One of their drawbacks, however is the inability to process them using cost-effective processing methods such as Resin Transfer Molding (RTM) and Resin Film Infusion (RFI). Development of low viscosity, high temperature polymers has been the subject of intense research. Recently, a new generation of low viscosity polyimides were synthesized by the introduction of twisted biphenyl or binapthyl groups into the backbone. This report details the progress for Year 1, which has involved acquiring samples and initiating Phases I and II of the proposed research. Specifically, studies of the process-property relationships of a series of polymers using oligomers based on 2,3,3' ,4'-biphenyltertracarboxylic dianhydride (PBDA) and a mixture of a diamine, BAX and a triamine, 1,3,5-Tris (4-aminophenoxybenzene), TAB, where the amount of TAB was varied have been initiated. The sample containing 10 percent TAB possesses a slightly higher degree of crystalline order versus that of the 20 percent TAB sample, based on x-ray diffraction studies of the b-staged oligomers. Both systems lose all of the crystalline order upon curing, however. The chemorheology has been studied as a function of the TAB content. While the magnitude of the viscosity is essentially the same for both systems, the cure kinetics of the 10 percent TAB system is faster than that for the 20 percent TAB system. The sample exhibits a melting-recrystallization-remelting behavior before the crosslinking commences. Correlation of other kinetic parameters, such as the activation energies for curing, the Tg and mechanical properties to the structure of these systems is underway. Future studies will involve characterization of mechanical and thermal properties of the pure resins and the fabrication of fiber reinforced composites using these materials.

Dean, Derrick↗
DOE OSTI2020

Reduced Neutralization Feasibility Study for H-Canyon Accelerated Basin De- Inventory (ABD) Program

An alternative approach to Spent Nuclear Fuel (SNF) and Nuclear Material Processing was developed for future H-Canyon (HCAN) and L-Area operations that involves a paradigm shift from current HCAN, Concentrate, Storage, and Transfer Facility (CSTF), and Defense Waste Processing Facility (DWPF) operations. The alternative, referred to as Accelerated Basin De-inventory (ABD), requires that all Domestic and Foreign Research Reactor SNF currently at the Savannah River Site (SRS) will be dissolved, stored, and then transferred to CSTF without recovery of Highly Enriched Uranium (HEU). Concentrated nitric acid is utilized to dissolve aluminum spent nuclear fuel (ASNF) in HCAN. The vessels and piping in HCAN are fabricated from 304L stainless steel and are ideally suited to handle the acidic waste stream. However, as the waste is transferred to the CSTF and DWPF, it will contact the carbon steel waste tanks in CSTF. In order to prevent corrosion of the carbon steel, the acidic waste is neutralized (i.e., pH adjusted over 11) by the addition of sodium hydroxide (NaOH). The NaOH is added until the final solution contains 1.2 M excess -OH. Additionally, if the waste is not neutralized to a pH greater than 11, then aluminum hydroxide (Al(OH) 3 ) would form, and solids may form in the piping as it is transferred to CSTF. This document presents an analysis of the influence of reducing the excess caustic that is added to the neutralization tanks on the corrosion protection scheme primarily for the CSTF waste tanks. The implications to HCAN and DWPF were also assessed.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Electrochemistry of PUREX: R is for Reduction and Ion Transfer

The PUREX (Plutonium, Uranium, Reduction, EXtraction) process is the foundation of all industrial activities that involve the recycling of plutonium and uranium from used nuclear fuel. With over 70 years of research, engineering, and operations, it can be argued that little opportunity is left for further discovery and new fundamental understandings regarding PUREX, in general, and tri-n-butyl phosphate (TBP), in particular. Through use of an advanced electroanalytical approach, molecular-level insights regarding the back-extraction of Pu(IV) by reductive separation is reported. Studies of model PUREX systems, with lanthanide ions extracted into 20 % TBP in n-dodecane, are used to demonstrate the approach. These studies reveal knowledge pertinent to mass transfer aspects of the biphasic reductive stripping reaction central to the separation of U and Pu in PUREX. Two lanthanide ions—Ce(IV) and Yb(III)—were extracted from their concentrated solutions in aqueous 3 M HNO 3 to expressly provide electrically conducting third phases to facilitate electrochemical data acquisition. To simplify the diabolically-complicated reductive separation aspects of PUREX, the controlled polarization of electrode surfaces was used to reduce Ce(IV) and Yb(III) in place of chemical reductants. Electroanalyses of the biphasic systems with Ce(IV) and Yb(III) using three-phase electrode differential pulse voltammetry demonstrate the effects of mass transfer across water-oil interfaces on the electrode potentials for the reduction to Ce(III) and Yb(II). These reductions trigger nitrate transfer out of the oil phase for Ce and proton transfer into the organic phase for Yb. This is in correlation with the transfer of the charge-neutral ion pairs Ce·3NO 3 and Yb·2NO 3 out of the oil phases. Here, the differences in ion transfer steps reflect significant variations in the equilibrium speciation of multinuclear Ce(IV) and mononuclear Yb(III) solvates of TBP in the oil phases and the loading of the organic phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Levelized Cost of CO 2 Captured Using Five Physical Solvents in Pre-combustion Applications

Aspen Plus v8.8 was used to perform techno-economic analysis (TEA) of a CO 2 capture process from a typical fuel gas stream in a 543-MW pre-combustion power plant using five different physical solvents (Selexol, PEGPDMS-1, NMP, [aPy][Tf 2 N] and [hmim][Tf 2 N]). The process included a countercurrent packed-bed absorber operating under high-pressure over a wide range of temperatures and three pressure-swing flash drums for solvent regeneration. Furthermore, two packings, Mellapak 250Y and IMTP50, were used and the Levelized costs of CO 2 captured (LCOC) were calculated. The simulation results indicated that using Mellapak 250Y exhibited lower LCOC values than those when using IMTP50 for the five solvents under all conditions used as it offered better mass transfer. The CO 2 capture process carried out at low temperatures showed lower LCOC values than those at higher temperatures due to the increased CO 2 solubility in the solvents at lower temperatures, requiring smaller absorber diameter and lower solvent circulation rates, which offset the cooling requirements. Comparing the lowest LCOC values for the five solvents, the hydrophobic PEGPDMS-1 solvent was the most promising one compared to the other four solvents, due to its lowest capital and operating costs and noncorrosive, which enabled using less expensive materials for the process equipment.

42 ENGINEERING↗
NASA NTRS1983

Computer program for analysis of split-Stirling-cycle cryogenic coolers

A computer program for predicting the detailed thermodynamic performance of split-Stirling-cycle refrigerators has been developed. The mathematical model includes the refrigerator cold head, free-displacer/regenerator, gas transfer line, and provision for modeling a mechanical or thermal compressor. To allow for dynamic processes (such as aerodynamic friction and heat transfer) temperature, pressure, and mass flow rate are varied by sub-dividing the refrigerator into an appropriate number of fluid and structural control volumes. Of special importance to modeling of cryogenic coolers is the inclusion of real gas properties, and allowance for variation of thermo-physical properties such as thermal conductivities, specific heats and viscosities, with temperature and/or pressure. The resulting model, therefore, comprehensively simulates the split-cycle cooler both spatially and temporally by reflecting the effects of dynamic processes and real material properties.

Brown, M. T.↗
NASA NTRS2003

Explosion Welding for Hermetic Containerization

A container designed for storing samples of hazardous material features a double wall, part of which is sacrificed during an explosion-welding process in which the container is sealed and transferred to a clean environment. The major advantage of this container sealing process is that once the samples have been sealed inside, the outer wall of what remains of the container is a clean surface that has not come into contact with the environment from which the samples were taken. Thus, there is no need to devise a decontamination process capable of mitigating all hazards that might be posed by unanticipated radioactive, chemical, and/or biological contamination of the outside of the container. The container sealing method was originally intended to be used to return samples from Mars to Earth, but it could also be used to store samples of hazardous materials, without the need to decontaminate its outer surface. The process stages are shown. In its initial double-wall form, the volume between the walls is isolated from the environment; in other words, the outer wall (which is later sacrificed) initially serves to protect the inner container from contamination. The sample is placed inside the container through an opening at one end, then the container is placed into a transfer dock/lid. The surfaces that will be welded together under the explosive have been coated with a soft metallic sacrificial layer. During the explosion, the sacrificial layer is ejected, and the container walls are welded together, creating a strong metallic seal. The inner container is released during the same event and enters the clean environment.

Dolgin, Benjamin↗