Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface Science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Emergent superconductivity in topological-kagome-magnet/metal heterostructures

Itinerant kagome lattice magnets exhibit many novel correlated and topological quantum electronic states with broken time-reversal symmetry. Superconductivity, however, has not been observed in this class of materials, presenting a roadblock in a promising path toward topological superconductivity. Here, we report that novel superconductivity can emerge at the interface of kagome Chern magnet TbMn 6 Sn 6 and metal heterostructures when elemental metallic thin films are deposited on either the top (001) surface or the side surfaces. Superconductivity is also successfully induced and systematically studied by using various types of metallic tips on different TbMn 6 Sn 6 surfaces in point-contact measurements. The anisotropy of the superconducting upper critical field suggests that the emergent superconductivity is quasi-two-dimensional. Remarkably, the interface superconductor couples to the magnetic order of the kagome metal and exhibits a hysteretic magnetoresistance in the superconducting states. Taking into account the spin-orbit coupling, the observed interface superconductivity can be a surprising and more realistic realization of the p-wave topological superconductors theoretically proposed for two-dimensional semiconductors proximity-coupled to s-wave superconductors and insulating ferromagnets. Our findings of robust superconductivity in topological-Chern-magnet/metal heterostructures offer a new direction for investigating spin-triplet pairing and topological superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Comparative Evaluation of the Ability of the MYNN‐EDMF PBL Scheme in WRF Model to Reproduce Near Surface Wind Speed Over Different Topographical Types

Abstract This study systematically evaluates the performance of the Mellor‐Yamada‐Nakanishi‐Niino‐Eddy‐Diffusion‐Mass‐Flux planetary boundary layer (PBL) scheme within the Weather Research and Forecasting (WRF) model in simulating near‐surface wind speeds across various topographies in New York State (NYS). Simulated wind speeds are compared with in‐situ measurements from 22 surface sites, grouped into six topographic categories: continental plain (CT), lakeside (LS), river valley (RV), Long Island (LI), Block Island (BI), and offshore ocean (OO). A quantitative evaluation based on Relative Euclidean Distance shows that wind speeds at the OO site are the most accurately reproduced, followed by those at LI sites, while the model performs less accurately for the remaining topographic groups. Wind speeds over CT sites tend to be overestimated by approximately 1 m/s, although their diurnal variability (DV) is well captured. In contrast, the model underestimates wind DV at LS, RV, LI, and BI sites, with the largest biases occurring at LI and BI, resulting in underestimated daytime wind speed and/or overestimated nighttime wind speed. The OO winds exhibit minimal diurnal variation, accurately captured by our WRF model. The surface wind diurnal variation is closely linked to PBL development. Among the indicators of PBL development, surface potential temperature biases most strongly correlate with wind speed biases. Our WRF model faces challenges in capturing the distinctions between winds influenced by local circulations and those over continental plains, and the significantly stronger winds at OO compared to BI. Potential causes for these biases are discussed, offering pathways for improving surface wind simulations in future.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Dependence of Heat Removal Rate of Pebble-Based Rods on Inter-Pebble Matrix Fill Fraction

Carbon pebble rods are a promising candidate for use in high heat flux regions of magnetic fusion energy reactor walls. Under high (10 – 50 MW/m 2 ) heat loads, carbon pebble rods release hot pebbles from the exposed surface, carrying away heat as the pebble rod surface recedes. In this work, we show that the surface recession rate during heating can be adjusted by changing the mechanical strength of the extruded rods, modifying the heat removal rate; this is accomplished here by varying the fill fraction of the inter-pebble matrix. A three-dimensional finite element model is presented that captures many experimental observations, including the sphere temperature and the surface recession rate. The model predicts that pebble release is caused by thermally driven crack propagation through the matrix and that the matrix strength against breaking is the single most important material parameter setting the pebble release rate; this prediction is supported by experimental results.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Magnetic impurity as a local probe of the $U(1)$ quantum spin liquid with spinon Fermi surface

We solve the problem of a magnetic impurity coupled to a U(1) quantum spin liquid with a spinon Fermi surface, and we compute the impurity spectral function. Using the slave rotor mean-field approach combined with gauge field fluctuations, we find that a peak located at the top of the lower Hubbard band and one at the bottom of the upper Hubbard band can emerge in the impurity spectral function. The peaks at the Hubbard band edges arise from the gauge field fluctuation-induced spinon-chargon binding inside the spinon Kondo screening cloud of the magnetic impurity. For a magnetic impurity embedded in a Mott insulator, our findings suggest that the emergence of a pair of peaks at the Hubbard band edges in the impurity density of states spectra provides strong evidence that the host Mott insulator is a U(1) quantum spin liquid with a spinon Fermi surface.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Sensing and arresting metal corrosion in molten chloride salts at 800 degrees Celsius

Originally this was planned as a 5 task, 3 year project, starting in May 2019. Task 1 Detecting oxidants and metal corrosion in molten chloride salt at 800°C. Task 2 Effectiveness of Zr getter using head gas sensors of inlet and outlet gases. Task 3 Cathodic protection of metal in molten salt at reducing potential. Task 4 Find reduction potential of metals in molten chloride salts & quantum modeling. Task 5 Develop corrosion test sections integrated into molten salt flow loop. After Q4, the project was scaled back and the reorganized SOPO was reduced to 3 tasks to be completed at the end of Q7 on 01/05/2021. The 3 SOPO tasks are: Task 1 Sense oxidants and the metal corrosion in molten Na-K-Mg-Cl salt at 800°C. Task 3 Cathodically protect H230 alloy in molten Na-K-Mg-Cl salt at 800C by making H230 alloy the cathode of a power supply with a chromium-rich-metal as the anode. Task 4 Find the reduction potential of Cr metal in molten Na-K-Mg-Cl salt at 800°C. The total timeline was reduced from 12 to 7 quarters with the end date being, January 5, 2021. This amounted to task 1,3 and 4 being done in Q5,6 and 7 of an extended year 1, ending on January 5, 2021. Task 1, 3 and 4 were completed. For task1) the increase of oxidants in molten salt is detected by two things: i) a positive shift of the electrode potential for a Haynes 230 alloy (H230) metal coupon versus a silver/silver-chloride reference electrode (SSE) and ii) an increase in the corrosion rate of a H230 electrode at 800C. For task 3) applying a cathodic potential (negative overpotential) to a H230 electrode versus SSE arrested the corrosion of the cathodically protected H230 compared to an unprotected “spectator H230 electrode” in the same molten chloride salt. Lastly, for task 4) the reduction potential of chrome and chrome rich, and nickel metal electrodes were measured. The most valuable outcome of this work is that a power supply can arrest metal corrosion for metal in molten chloride salt when the power supply applies a cathodic potential to bare metal, like H230, in molten chloride salts, like ternary Mg-K-Na-chloride salt. H230 is a high strength metal for containing molten chloride salt and ternary Mg-K-Na-chloride salt is used as heat transfer fluids in concentrating solar power plants. When to use cathodic protection for protecting metal in molten chloride salts? Two scenarios are envisioned: 1) for protecting high-valued components, like solar collectors and heat exchangers and 2) for protecting the bare surface in holidays (point defects) of corrosion inhibitors that are to intended to cover the entire surface of metal.

14 SOLAR ENERGY↗
DOE OSTI2021

Three-Dimensional Site Effects at Mortandad Canyon, NM: I. Validation against ambient noise recordings of topography effects

Observations from large earthquakes have shown that the presence of a strong topographic relief can significantly aggravate the catastrophic consequences of strong seismic motions. Structures on the tops of hills, ridges, and canyons, for example, have suffered systematically greater damage than similar structures at the hill bases or on level ground. Various earthquake recordings have confirmed the macroseismic observations, indicating systematic amplification of seismic motion over convex topographies, deamplification over concave topographic features, and complex amplification and deamplification patterns on hill slopes that result in significant differential motion. Despite the documented evidence of their role in elevating seismic risk, however, topography effects are not accounted for in the majority of seismic code provisions and microzonation studies, which are based instead on models of flat earth surface.

58 GEOSCIENCES↗
DOE OSTI2020

Low friction wear resistant graphene films

A low friction wear surface with a coefficient of friction in the superlubric regime including graphene and nanoparticles on the wear surface is provided, and methods of producing the low friction wear surface are also provided. A long lifetime wear-resistant surface including graphene exposed to hydrogen is provided, including methods of increasing the lifetime of graphene containing wear surfaces by providing hydrogen to the wear surface.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Axion insulator state in hundred-nanometer-thick magnetic topological insulator sandwich heterostructures

Abstract An axion insulator is a three-dimensional (3D) topological insulator (TI), in which the bulk maintains the time-reversal symmetry or inversion symmetry but the surface states are gapped by surface magnetization. The axion insulator state has been observed in molecular beam epitaxy (MBE)-grown magnetically doped TI sandwiches and exfoliated intrinsic magnetic TI MnBi 2 Te 4 flakes with an even number layer. All these samples have a thickness of ~ 10 nm, near the 2D-to-3D boundary. The coupling between the top and bottom surface states in thin samples may hinder the observation of quantized topological magnetoelectric response. Here, we employ MBE to synthesize magnetic TI sandwich heterostructures and find that the axion insulator state persists in a 3D sample with a thickness of ~ 106 nm. Our transport results show that the axion insulator state starts to emerge when the thickness of the middle undoped TI layer is greater than ~ 3 nm. The 3D hundred-nanometer-thick axion insulator provides a promising platform for the exploration of the topological magnetoelectric effect and other emergent magnetic topological states, such as the high-order TI phase.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Uniaxial Spin Texture in a Superconducting Electron Gas Revealed by Exchange Interactions

Two-dimensional (2D) superconductors with spin-textured Fermi surfaces can be a platform for realizing unconventional pairing states and are of substantial interest in the context of quantum information science and superconducting spintronics/orbitronics. We observed an unusual in-plane uniaxial anisotropy in the superconducting 2D electron gas (2DEG) formed at EuOx/KTaO3 (110) interfaces. This anisotropy is not evident in AlOx/KTaO3 (110) where the overlayer is nonmagnetic. Our results are consistent with a highly anisotropic “half-Rashba” spin-textured Fermi surface in 2DEGs formed at the KTaO3 (110) interface that is hidden from external magnetic fields due to a near cancellation between orbital and spin moments but revealed by exchange interactions of the electrons in the 2DEG with Eu moments near the EuOx/KTaO3 (110) interface. The interactions between the uniaxial spin texture and the magnetic overlayer offer previously unexplored ways to explore the interplay between magnetism and 2D superconductivity.

Yang, Junyi↗
DOE OSTI2023

A computational study of how surfaces affect slip family activity

Plastic deformation behavior is most conveniently assessed by characterization on a surface, but whether such observations are representative of bulk properties is uncertain. Motivated by reported inconsistencies in slip resistance probed at different depths, we investigated (i) whether the average slip family activity is affected by the presence of a surface and (ii) how the kinematic nature of available slip families influences a potential surface effect. The slip family activity as a function of distance from the surface was extracted from full-field crystal plasticity simulations of random polycrystalline hexagonal close-packed (HCP) and body-centered cubic (BCC) metals as examples of mixed in contrast to universally-high numbers of slip systems per family. Under certain conditions, a deviation from bulk slip activity is observed up to about two grains from the surface. For the easiest (least slip-resistant) family, a surface effect of decreasing activity with depth emerges if the number of slip systems falls below about six. For harder families, slip activity always increases with depth. Furthermore, these phenomena are explained on the basis of varying constraints with depth in connection with the kinematic properties of slip families in the material.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Helium bubble size effects on the surface morphological response of plasma-facing tungsten

Abstract We report a simulation study on the effects of helium (He) bubble size on the morphological evolution and pattern formation on the surface of tungsten used as a plasma-facing component (PFC) in nuclear fusion devices. We have carried out a systematic investigation based on self-consistent dynamical simulations of surface morphological evolution according to an atomistically-informed, 3D continuum-scale model that captures well the relevant length and time scales of surface nanostructure formation in PFC tungsten. The model accounts for PFC surface diffusion, driven by the biaxial compressive stress originating from the over-pressurized He bubbles in the near-surface region of PFC tungsten as a result of He plasma exposure, combined with the formation of self-interstitial atoms in tungsten that diffuse toward the PFC surface and the flux of surface adatoms generated as a result of surface vacancy-adatom pair formation upon He implantation; this transport of surface adatoms contributes to the anisotropic growth of surface nanostructural features due to the different rates of adatom diffusion along and across step edges of islands on the tungsten surface. Our detailed analysis reveals that varying the average He bubble size plays an important role in the PFC surface growth kinetics as well as the resulting surface topography. Specifically, we find that an increase in the He bubble size leads to a deceleration in the growth rate of the tungsten nanotendrils that emanate from the PFC surface. We also find that the separation distance between the resulting surface features increases with increasing He bubble size, as well as over time. This coarsening effect is a thermally activated process resulting in an accurate description of the temperature dependence of the average surface feature separation by an Arrhenius relation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Surface Film Formation on Al-V Alloys with Far-From-Equilibrium Microstructure

Nanocrystalline supersaturated Al-V alloys produced by high-energy ball milling have been reported to exhibit enhanced corrosion resistance and mechanical properties compared to commercial Al alloys. Corrosion of passive alloys such as Al-V alloy relies on the characteristics of the surface film, which is studied using scanning/transmission electron microscopy and time-of-flight secondary ion mass spectrometry. The effect of microstructure and composition on the surface film has been investigated after different immersion periods (30 min, 2 h, and 1 day) in 0.1 M NaCl. The surface film was complex and composed of oxidized Al and V. The heterogeneous surface film was observed due to the presence of secondary phases and initiation of localized corrosion. The void formation was observed beneath the surface film that would potentially cause pitting corrosion. The generation of nano-sized voids was dependent on grain orientation. Compared to pure Al, the chloride penetration is suppressed in Al-V alloys. The effect of composition and microstructure on surface film formation and attendant corrosion behavior is discussed herein.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Surface Self-Diffusion Induced Sintering of Nanoparticles

Despite the critical role of sintering phenomena in constraining the long-term durability of nanosized particles, a clear understanding of nanoparticle sintering has remained elusive due to the challenges in atomically tracking the neck initiation and discerning different mechanisms. Through the integration of in situ transmission electron microscopy and atomistic modeling, this study uncovers the atomic dynamics governing the neck initiation of Pt–Fe nanoparticles via a surface self-diffusion process, allowing for coalescence without significant particle movement. Real-time imaging reveals that thermally activated surface morphology changes in individual nanoparticles induce significant surface self-diffusion. Further, the kinetic entrapment of self-diffusing atoms in the gaps between closely spaced nanoparticles leads to the nucleation and growth of atomic layers for neck formation. This surface self-diffusion-driven sintering process is activated at a relatively lower temperature compared to the classic Ostwald ripening and particle migration and coalescence processes. The fundamental insights have practical implications for manipulating the morphology, size distribution, and stability of nanostructures by leveraging surface self-diffusion processes.

36 MATERIALS SCIENCE↗
DOE OSTI2022

In-Situ Pipeline Coatings for Methane Emissions Mitigation and Quantification from Natural Gas Pipelines

Addressing the current health of the nation’s existing 3 million miles of pipeline infrastructure is key to preventing further climate change. In 2020, natural gas production exceeded 34 trillion cubic feet (Tcf). Roughly 75% of natural gas consists of methane (CH 4 ), which is up to 25 times more powerful than carbon dioxide (CO 2 ) at trapping heat within the atmosphere over a 100-year period, and studies from the Environmental Defense Fund (EDF) estimate approximately 2% of all the natural gas produced will be lost during normal operations due to unaddressed leaks. This does not even consider the risks of major disaster due to pipeline failure, or the losses and extra fuel costs incurred due to corrosion and scale deposits in under-maintained pipelines. The objective of the proposed research is to demonstrate the protection capabilities and economic benefits of Oceanit’s internal pipe surface treatment, known as DragX™. DragX™ is a chemically resistant, water-and-oil repellent nanocomposite system that can be readily applied in-situ on natural gas transmission and distribution pipelines with a minimum of surface preparation. This makes it an ideal candidate for in-place retrofitting and refurbishment of existing pipelines without the need for expensive extraction and replacement. DragX™ is also able to significantly reduce the surface roughness, and subsequently, the frictional drag forces within a pipeline, improving throughput, decreasing energy costs of pressurization and pumping, and allowing for longer pipeline operation without interruption, reducing the methane emitted during pipe isolation and venting. As part of this project, Oceanit has utilized the Department of Energy’s support to fully develop, de-risk and prove the DragX™ core technology is both economically viable and commercially desirable to pipeline operators and energy companies alike. DragX™ material properties were optimized in this effort both for ease of applicability, to provide value in certain key parameters, and was demonstrated on pilot applications exceeding 2 miles in length. Beyond the already field demonstrated applications, this innovative nanocomposite surface treatment has the potential to be the backbone for CO 2 and Hydrogen transporting pipeline infrastructure. The learnings from this project could accelerate the deployment of surface treatment technologies related to the energy transition infrastructure, thus benefitting the clean energy initiatives in the United States and all around the world.

03 NATURAL GAS↗
DOE OSTI2021

Effects of blended cements and carbonation on chloride-induced corrosion propagation

Highlights: • Corrosion propagation of blended cements was investigated for 1 year. • Carbonated and non‑carbonated mortars were evaluated. • Galvanostatic pulse and ER sensors were used to monitor corrosion. • Mortar properties were correlated with corrosion rates and corrosion damage. • Relationships between mortar properties and corrosion behaviour were established. Supplementary cementitious materials are known to refine the pore structure of concrete and accelerate the carbonation progress. The combination of the two processes can have both beneficial and disadvantageous effects on corrosion, especially when chlorides are also involved. In this study the corrosion properties of multiple blended cements were evaluated in carbonated and non‑carbonated states, with chlorides introduced through cyclic ponding. The examination involved monitoring the propagation phase, determining the microstructural properties of cements, and assessing the final corrosion damage. The results showed that the steel in the blended cements initially had a relatively high corrosion activity, which later decreased compared to the OPC. This stabilisation was presumably due to the beneficial changes to the pore structure. Carbonation had a significant impact on the corrosion, with carbonated mortars revealing shallower damage over a larger surface area. This effect was more pronounced for blended cements that exhibited greater susceptibility to carbonation.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Influence of Surface Ligands on Energetics at FASnI 3 /C 60 Interfaces and Their Impact on Photovoltaic Performance

Interfacial chemistry and energetics significantly impact the performance of photovoltaic devices. In the case of Pb-containing organic metal halide perovskites, photoelectron spectroscopy has been used to determine the energetic alignment of frontier electronic energy levels at various interfaces present in the photovoltaic device. For the Sn-containing analogues, which are less toxic, no such measurements have been made. Through a combination of ultraviolet, inverse, and X-ray photoelectron spectroscopy (UPS, IPES, and XPS, respectively) measurements taken at varying thickness increments during stepwise deposition of C 60 on FASnI 3 , we present the first direct measurements of the frontier electronic energy levels across the FASnI 3 /C 60 interface. The results show band bending in both materials and transport gap widening in FASnI 3 at the interface with C 60 . The XPS results show that iodide diffuses into C 60 and results in n-doping of C 60 . This iodide diffusion out of FASnI 3 impacts the valence and conduction band energies of FASnI 3 more than the core levels, with the core level shifts displaying a different trend than the valence and conduction bands. Surface treatment of FASnI 3 with carboxylic acids and bulky ammonium substituted surface ligands results in slight alterations in the interfacial energetics, and all surface ligands result in similar or improved PV performance relative to the untreated devices. Finally, the greatest PV stability results from treatment with a fluorinated carboxylic acid derivative; however, iodide diffusion is still observed to occur with this surface ligand.

interfacial energetics↗
DOE OSTI2022

Role of Sea‐Surface Salinity in Simulating Historical Decadal Variations of Atlantic Meridional Overturning Circulation in a Coupled Climate Model

Abstract Extending climate prediction from seasonal to decadal timescales requires realistic initialization of not only upper ocean heat content but also the Atlantic meridional overturning circulation (AMOC). However, it remains a major challenge to realistically initialize AMOC in a coupled system while also maintaining a balanced atmosphere‐ocean initial state. This study demonstrates the feasibility of generating fully coupled historical states with realistic AMOC variability. Employing a forced ocean—sea‐ice (FOSI) model simulation as the “truth,” we show reproducibility of key features of historical AMOC decadal variability in a fully coupled model by restoring sea‐surface salinity, in addition to sea‐surface temperature restoring widely used in seasonal prediction. The atmospheric state of the restored coupled model solution is much closer to that of the free coupled simulation than to the observations used in FOSI, pointing to potential advantages of using this approach for initializing decadal predictions with reduced ocean initialization shock.

54 ENVIRONMENTAL SCIENCES↗