Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STRENGTH FUNCTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

First Principles Modeling of Metal/Ceramic Multilayer Nano-heterostructures.

Nanoscaled multilayer films composed of metals and ceramics have been explored for their potential applications as ductile, yet strong, materials. It is believed that at the nanoscale, the interfaces between the two materials constituting the multilayer assume an increasingly important role in determining the properties, as they comprise a more significant volume fraction of the multilayer with decreasing layer thickness. In this ab initio work, density functional theory was used to calculate the ideal shear strengths of pure Al, pure TiN, the Al/TiN interfacial region, and Al/TiN multilayers. The ideal shear strength of the Al/TiN interface was found to vary from very low (on the order of the ideal shear strength of Al) to very high (on the order of the ideal shear strength of TiN), depending on whether the TiN at the interface was Ti- or N-terminated, respectively. The results suggest that the shear properties of Al/TiN depend strongly on the chemistry of the interface, Al:N versus Al:Ti terminations. Nevertheless, for the Al/TiN multilayers, the ideal shear strength was limited by shear in the Al layer away from the interface, even when the individual layer thickness is less than a nanometer. Further we found an unusual structural rotation of bulk single-crystal Al under uniaxial compressive strains. It was found that under strains either along the <11-2> or the <111> directions, beyond a critical stress of about 13 GPa, the Al crystal can rotate through shear in the Shockley partial direction (i.e.,<11-2>) on the {l_brace}111{r_brace} plane, in an attempt to relieve internal stresses. This phenomenon reveals a possible mechanism leading to the onset of homogeneous dislocation nucleation in Al under high uniaxial compressions.

36 MATERIALS SCIENCE↗

The Crinkling Strength and the Bending Strength of Round Aircraft Tubing

The upper limit of the column strength of structural members composed of thin material is the maximum axial stress such members can carry when short enough to fail locally, by crinkling. This stress is a function of the mechanical properties of the material and of the geometrical shape of the cross section. The bending strength, as measured by the modulus of rupture, of structural members is also a function of these same variables. Tests were made of round tubes of chromium-molybdenum steel and of duralumin to determine the crinkling strengths and the bending strengths in terms of the specified yield strength and the ratio of diameter to thickness. Empirical formulas are given relating these quantities.

Osgood, William R↗

Anodized Aluminum Oxide Membrane Ionic Memristors

Memory effect in ion transport (IT) at the solid–solution interface is uniquely attractive in that the conductance depends on or “memorizes” the previous states. Hysteretic and rectified transport properties offer exciting potential to developing advanced iontronics and neuromorphic functions, improving the efficiency of energy conversion and electrochemical processes, and overcoming the selectivity-throughput bottleneck in the enrichment of low abundant species for environment- and energy-friendly separations, among others. Herein, memory effects are discovered in the rectified electrokinetic IT through anodized aluminum oxide (AAO) membranes containing densely packed highly ordered nanochannels (10 10 per cm 2 ). Characteristic memristor responses of pinched current–potential loops are resolved in voltammetric experiments and successfully reproduced through finite element simulation. Excitatory and inhibitory conductance states are shown to arise from the enrichment and depletion of mobile charge carriers. Structurewise, the transport symmetry is broken by the barrier oxide layer (BOL) on the one end of the cylindrical nanochannels across the AAO membranes. Charge selectivity is attributed to the gradient(s) of the space charge density across the BOL characterized by depth profiling via X-ray photoelectron spectroscopy analysis. The space charge gradient(s) overcomes the fundamental limitation of widely exploited surface charge effects to enable intense rectification and hysteresis prevailing at very high ionic concentrations up to 1–2 M. A new strategy is developed for controlling the preferential IT direction and selectivity via counterion intercalation and extraction/exchange. Mechanistic understanding is further confirmed through parameter variations such as potential scan rate and ionic strength, which also demonstrates convenient controls of the related functions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Density functional modeling of the binding energies between aluminosilicate oligomers and different metal cations

Interactions between negatively charged aluminosilicate species and positively charged metal cations are critical to many important engineering processes and applications, including sustainable cements and aluminosilicate glasses. In an effort to probe these interactions, here we have calculated the pair-wise interaction energies (i.e., binding energies) between aluminosilicate dimer/trimer and 17 different metal cations M n+ (M n+ = Li + , Na + , K + , Cu + , Cu 2+ , Co 2+ , Zn 2+ , Ni 2+ , Mg 2+ , Ca 2+ , Ti 2+ , Fe 2+ , Fe 3+ , Co 3+ , Cr 3+ , Ti 4+ and Cr 6+ ) using a density functional theory (DFT) approach. Analysis of the DFT-optimized structural representations for the clusters (dimer/trimer + M n+ ) shows that their structural attributes (e.g., interatomic distances) are generally consistent with literature observations on aluminosilicate glasses. The DFT-derived binding energies are seen to vary considerably depending on the type of cations (i.e., charge and ionic radii) and aluminosilicate species (i.e., dimer or trimer). A survey of the literature reveals that the difference in the calculated binding energies between different M n+ can be used to explain many literature observations associated with the impact of metal cations on materials properties (e.g., glass corrosion, mineral dissolution, and ionic transport). Analysis of all the DFT-derived binding energies reveals that the correlation between these energy values and the ionic potential and field strength of the metal cations are well captured by 2nd order polynomial functions ( R 2 values of 0.99–1.00 are achieved for regressions). Given that the ionic potential and field strength of a given metal cation can be readily estimated using well-tabulated ionic radii available in the literature, these simple polynomial functions would enable rapid estimation of the binding energies of a much wider range of cations with the aluminosilicate dimer/trimer, providing guidance on the design and optimization of sustainable cements and aluminosilicate glasses and their associated applications. Finally, the limitations associated with using these simple model systems to model complex interactions are also discussed.

Gong, Kai↗

Transformer-based operator learning framework for self-energy in strongly correlated systems

We introduce Σ-Attention, a transformer-based operator-learning framework for approximating the self-energy operator of strongly correlated electronic systems. By creating a batched dataset that combines results from three complementary approaches, i.e., many-body perturbation theory, strong-coupling expansion, and exact diagonalization, each effective in specific parameter regimes, Σ-Attention is applied to learn an accurate approximation for the self-energy operator that is valid across a wide range of parameter regimes. This hybrid strategy leverages the strengths of existing methods while relying on the transformer's ability to generalize beyond individual limitations. More importantly, the scalability of the transformer architecture allows the learned self-energy to be extended to systems with larger sizes, leading to much improved computational scaling. Using the one-dimensional Hubbard model, we demonstrate that Σ-Attention can accurately predict the Matsubara Green's function of large systems with a wide range of coupling strength. Our framework offers a promising and scalable pathway for studying strongly correlated systems with many possible generalizations.

Zhu, Yuanran↗

A quasilinear formulation of turbulence driven current

Non-inductive current drive mechanisms, such as the familiar neoclassical bootstrap current correspond to an essential component to the realization of steady state tokamak operation. In this work, we discuss a novel collisionless mechanism through which a mean plasma current may be driven in the presence of microturbulence. In analogy with the traditional neoclassical bootstrap current drive mechanism, in which the collisional equilibrium established between trapped and passing electrons results in the formation of a steady state plasma current, here we show that resonant scattering of electrons by drift wave microturbulence provides an additional means of determining the equilibrium between trapped and passing electrons. The resulting collisionless equilibrium is shown to result in the formation of an equilibrium current whose magnitude is a function of the thermodynamic forces. A mean field formulation is utilized to incorporate the above components into a unified framework through which both collisional as well as collisionless current drive mechanisms may be self-consistently treated. Utilizing a linearized Fokker-Planck collision operator, the plasma current in the presence of both collisions as well as turbulent stresses is computed, allowing for the relative strength of these two mechanisms to be quantified as a function of collisionality and fluctuation amplitude.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Neutron-hole strength in N = 81 nuclei

A systematic study of neutron-hole strength in the N = 81 nuclei 137 Ba, 139 Ce, 141 Nd, and 143 Sm is reported. The single-neutron removal reactions (p,d) and ( 3 He,α) were measured at energies of 23 and 34 MeV, respectively. Spectroscopic factors were extracted from measured cross sections through a distorted-wave Born approximation analysis and centroids of single-particle strength have been established. Here, the change in these centroid energies as a function of proton number have been compared to calculations of the monopole shift for the s 1/2 and h 11/2 orbitals, where the majority of the strength has been observed. Significant fragmentation of strength was observed for the d and g 7/2 orbitals, particularly for the latter orbital which is deeply bound, with summed strengths that indicate a significant amount lies outside of the measured excitation energy range.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Analysis of Spin Response Function at Beam Interaction Point in JLEIC

The spin response function is determined by a collid-er’s magnetic lattice and allows one to account for con-tributions of perturbing fields to spin resonance strengths. The depolarizing effect of an incoming beam depends significantly on the response function value at the interaction point (IP). We present an analytic calcula-tion of the response function for protons and deuterons at the IP of Jefferson Lab Electron Ion Collider (JLEIC) over its whole momentum range. We find a good agreement of the analytic calculation with our numerical modeling results obtained using a spin tracking code, Zgoubi.

Derbenev, Yaroslav S.↗

Calculations Using Density Dependent Melt Temperature and Shear Modulus with the PTW Strength Model (U)

This presentation describes one effect of using density dependent melt temperature and shear modulus in calculations with the Preston, Tonks and Wallace (PTW) Strength Model to simulate lab experiments. Calculations are in error if density dependent melt and shear functions are inconsistent with a PTW parameter set for a material. In most laboratory experiments used to determine these strength parameters the density changes are small. So, the melt temperature (T m ) and the shear modulus (G 0 ) are assumed to be constant. However, in order to be consistent with the PTW mode l theory these values should be determined at the laboratory reference density. Two parameters (α and κ) in the model are affected by use of inconsistent values for T m and G 0 . Assuming a correct value of the shear modulus is used in the data fit code has been written to auto-correct inconsistent PTW parameters sets at run time. Furthermore this code will not alter values in consistent parameter set.

36 MATERIALS SCIENCE↗

Alumina-Reinforced Zirconia Composites

Alumina-reinforced zirconia composites, used as electrolyte materials for solid oxide fuel cells, were fabricated by hot pressing 10 mol percent yttria-stabilized zirconia (10-YSZ) reinforced with two different forms of alumina particulates and platelets each containing 0 to 30 mol percent alumina. Major mechanical and physical properties of both particulate and platelet composites including flexure strength, fracture toughness, slow crack growth, elastic modulus, density, Vickers microhardness, thermal conductivity, and microstructures were determined as a function of alumina content either at 25 C or at both 25 and 1000 C. Flexure strength and fracture toughness at 1000 C were maximized with 30 particulate and 30 mol percent platelet composites, respectively, while resistance to slow crack growth at 1000 C in air was greater for 30 mol percent platelet composite than for 30 mol percent particulate composites.

Choi, Sung R.↗

Uncertainty induced by QCD coupling in the CTEQ global analysis of parton distributions

We examine the dependence of parton distribution functions (PDFs) on the value of the QCD coupling strength {alpha}{sub s}(M{sub Z}). We explain a simple method that is rigorously valid in the quadratic approximation normally applied in PDF fitting, and fully reproduces the correlated dependence of theoretical cross sections on {alpha}{sub s} and PDF parameters. This method is based on a statistical relation that allows one to add the uncertainty produced by {alpha}{sub s}, computed with some special PDF sets, in quadrature with the PDF uncertainty obtained for the fixed {alpha}{sub s} value (such as the CTEQ6.6 PDF set). A series of four CTEQ6.6AS PDFs realizing this approach, for {alpha}{sub s} values in the interval 0.116{<=}{alpha}{sub s}(M{sub Z}){<=}0.120, is presented. Using these PDFs, the combined {alpha}{sub s} and PDF uncertainty is assessed for theoretical predictions at the Fermilab Tevatron and Large Hadron Collider.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Renewable Hydride Donors for the Catalytic Reduction of CO 2 : A Thermodynamic and Kinetic Study

Increasing atmospheric CO2 concentration and dwindling fossil fuel supply necessitate the search for efficient methods for CO2 conversion to fuels. Assorted studies have shown pyridine and its derivatives capable of (photo)electrochemically reducing CO2 to methanol, and some mechanistic interpretations have been proposed. Here, we analyze the thermodynamic and kinetic aspects of the efficacy of pyridines as hydride-donating catalytic reagents that transfer hydrides via their dihydropyridinic form. We investigate both the effects of functionalizing pyridinic derivatives with electron-donating and electron-withdrawing groups on hydride-transfer catalyst strength, assessed via their hydricity (thermodynamic ability) and nucleophilicity (kinetic ability), and catalyst recyclability, assessed via their reduction potential. We find that pyridines substituted with electron-donating groups have stronger hydride-donating ability (having lower hydricity and larger nucleophilicity values), but are less efficiently recycled (having more negative reduction potentials). In contrast, pyridines substituted with electron-withdrawing groups are more efficiently recycled, but are weaker hydride donors. Functional group modification favorably tunes hydride strength or efficiency, but not both. We attribute this problematic coupling between the strength and recyclability of pyridinic hydrides to their aromatic nature and suggest several avenues for overcoming this difficulty.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Resistance and Strength of Soft Solder Splices between Conductors in MICE Coils

Two of the three types of MICE magnets will have splices within their coils. The MICE coupling coils may have as many as fifteen one-meter long splices within them. Each of the MICE focusing coils may have a couple of 0.25-meter long conductor splices. Equations for the calculation of resistance of soldered lap splices of various types are presented. This paper presents resistance measurements of soldered lap splices of various lengths. Measured splice resistance is shown for one-meter long splices as a function of the fabrication method. Another important consideration is the strength of the splices. The measured breaking stress of splices of various lengths is presented in this paper. Tin-lead solders and tin-silver solders were used for the splices that were tested. From the data given in this report, the authors recommend that the use of lead free solders be avoided for low temperature coils.

42 ENGINEERING↗

Indentation flaw formation and strength response of silicon nitride ceramics at low indentation loads

The configuration and the strength response of indentation flaws in silicon nitrides are described as a function of indentation loads primarily near the threshold level. Test materials under consideration include 30 vol percent SiC whisker-reinforced composite silicon nitride and similar monolithic silicon nitride. The results of strength testing show that, at indentation loads less than or equal to 1.96, a number of the specimens fail from the intrinsic flaws of the materials rather than from the indent sites, causing a distinct trend to reach a plateau, at a level corresponding to the as-received strength of the material. The ratio of the mirror constant to the fracture toughness for the composite and monolithic materials is found to be 1.44 and 1.51, respectively.

Choi, Sung R.↗

Recycler Chromaticities and End Shims for NOvA at Fermilab

In era of NOvA operation, it is planned to slip-stack six on six Booster proton batches in the Recycler ring for a total intensity of 5 x 10{sup 13} protons/cycle. During the slip-stacking, the chromaticities are required to be jumped from (-2,-2) to (-20,-20). However, with the existing 2 families of powered sextupoles in the lattice, the chromaticities can only be adjusted to (-12,-12) from (-2,-2). On the other hand, the presently designed Recycler lattice for Nova replaces the 30 straight section with 8 'D-D half FODO cells'. With the limit of the feasible quad strength, 3 quads in a half-cell were used to obtain the working point under, and the maximum beta-functions in this section cannot be less than 80 m. In this paper, we re-designed the end shims of the permanent magnets in the ring lattice with appropriate quadrupole and sextupole components to meet both chromaticity and tune requirements. We are able to use 2 quads in a half cell in RR30 straight section within feasible quad strength. The maximum beta-functions are also lowered to around 55 m. The dynamic aperture tracking has been done using MAD to simulate the scenario of beam injection into the Recycler ring for Nova.

43 PARTICLE ACCELERATORS↗

Strength, toughness and R-curve behaviour of SiC whisker-reinforced composite Si3N4 with reference to monolithic Si3N4

The flexural strength and fracture toughness of 30 vol pct SiC whisker-reinforced Si3N4 material were determined as a function of temperature from 25 to 1400 C in an air environment. It was found that both strength and toughness of the composite material were almost the same as those of the monolithic counterpart. The room-temperature strength was retained up to 1100 C; however, appreciable strength degradation started at 1200 C and reached a maximum at 1400 C due to stable crack growth. In contrast, the fracture toughness of the two materials was independent of temperature with an average value of 5.66 MPa sq rt m. It was also observed that the composite material exhibited no rising R-curve behavior at room temperature, as was the case for the monolithic material. These results indicate that SiC whisker addition to the Si3N4 matrix did not provide any favorable effects on strength, toughness and R-curve behavior.

Choi, S. R.↗

Atomic data and spectral line intensities for Ni XI

Electron impact collision strengths, energy levels, oscillator strengths, and spontaneous radiative decay rates are calculated for Ni XI. We include in the calculations the 12 lowest configurations, corresponding to 180 fine-structure levels: 3s{sup 2}3p{sup 6}, s{sup 2}3p{sup 5}3d, 3s{sup 2}3p{sup 4}3d{sup 2}, 3s3p{sup 6}3d, 3s{sup 2}3p{sup 5}4l, and 3s3p{sup 6}4l with l = s, p, d, f. Collision strengths are calculated at five incident energies for all transitions: 7.45, 17.6, 31.4, 50.1, and 75.2 Ry above the threshold of each transition. An additional energy, very close to the transition threshold, has been added, whose value is between 0.0007 Ry and 0.25 Ry depending on the levels involved. Calculations have been carried out using the Flexible Atomic Code. The scattering problem is solved in the distorted wave approximation. Excitation rate coefficients are calculated as a function of electron temperature by assuming a Maxwellian electron velocity distribution. Using the excitation rate coefficients and the radiative transition rates of the present work, combined with close coupling collision excitation rate coefficients available in the literature for the lowest 17 levels, statistical equilibrium equations for level populations are solved at electron densities covering the range of 10{sup 8}-10{sup 14} cm{sup -3} and at an electron temperature of logT{sub e}K=6.1, corresponding to the maximum abundance of Ni XI. Spectral line intensities are calculated, and their diagnostic relevance is discussed. This dataset will be made available in the next version of the CHIANTI database.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Radical Coupling Reactions in Lignin Synthesis: A Density Functional Theory Study

Lignin is a complex, heterogeneous polymer in plant cell walls that provides mechanical strength to the plant stem and confers resistance to degrading microbes, enzymes, and chemicals. Lignin synthesis initiates through oxidative radical-radical coupling of monolignols, the most common of which are p-coumaryl, coniferyl, and sinapyl alcohols. Here, we use density functional theory to characterize radical-radical coupling reactions involved in monolignol dimerization. We compute reaction enthalpies for the initial self- and cross-coupling reactions of these monolignol radicals to form dimeric intermediates via six major linkages observed in natural lignin. The 8-O-4, 8-8, and 8-5 coupling are computed to be the most favorable, whereas the 5-O-4, 5-5, and 8-1 linkages are less favorable. Overall, p-coumaryl self- and cross-coupling reactions are calculated to be the most favorable. For cross-coupling reactions, in which each radical can couple via either of the two sites involved in dimer formation, the more reactive of the two radicals is found to undergo coupling at its site with the highest spin density.

09 BIOMASS FUELS↗