Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SOC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

The Relationship Between Two Methods for Estimating Uncertainties in Data Assimilation

This note examines the relationship between two apparently unrelated methods for estimating error statistics or uncertainties of relevance to data assimilation. The first method is due to (Desroziers et al., 2005, Q. J. R. Meteorol. Soc., 131, 3385–3396; referred to as DBCP hereafter) and relies on residual statistics readily available from data assimilation applications. The second method, the three- cornered hat (3CH) developed by Gray and Allan (1974, IEEE 28th Annual Symp. Freq. Control, 243–246), only recently applied to atmospheric sciences, uses three data sets and can derive estimates of relevant error uncertainties as well. The usefulness of both methods lies in them not requiring knowledge of the true value of the quantities at play. DBCP derives its results by relying explicitly on the constraints as- sociated with the data assimilation minimization problem; 3CH is general and its estimates hold as long as errors in the three data sets of choice are uncorrelated. Establishing the relationship between the methods requires applying the 3CH approach to the same observation, background, and analysis data sets used by DBCP. In this case, the same assumptions of DBCP on residual errors allow for cancellation of error cross–covariance terms in 3CH such that two of its corners derive identical estimates for observation and background error covariances as those of DBCP. The error cross–covariance terms associated with the third corner are shown to add up to twice the analysis error covariance so that the 3CH estimate for the third corner recovers the negative of the analysis error covariance. Illustrations of these findings are provided by deriving uncertainties for radio occultation bending angles.

Ricardo Todling↗

Performance of Two Battery Prognostic Applications used by Two Octocopters for Safe Low Altitude Autonomous Flight Operations

This paper addresses the problem of building trust in online predictions of the remaining available flying time for two different electric Unmanned Aerial Vehicles (eUAVs) powered by lithium-ion-polymer batteries. Flight tests for various automation research missions for the two vehicles were monitored using two on-board battery health management applications to make predictions of the remaining flying time (RFT) for each eUAV and to predict the state of the battery. Playback of the voltage, current and temperature profiles of the battery discharge were used to assess the accuracy of the estimation of the voltage and the charge states of the models as well as the estimate of the RFT. The reference ground truth values were the observed landing time and the measured battery pack resting pack voltage 20 minutes after the flight. The predicted RFT, state of charge (SoC), and state of energy (SoE) were compared with the observed results. Noise values of one standard deviation from the mean values of the internal charge states of the battery model during a reference run were used to vary the states during simulation. One application used an equivalent circuit model of the electrical dynamics of the battery pack, and the other application used a reduced-order electrochemistry model. The variation of the model state components was compared to the variation in the estimate of the RFT and the variation in the SoE to estimate a confidence factor. Variation in the estimates caused by factors affecting the off-line laboratory parameter identification experiments is considered. Variation in the estimates due to environmental factors are discussed.

Assurance↗

Single-Event Effects Test Report Linux Operating System Configurations on TUL PYNQ-Z2

This study was undertaken to determine the single-event functional interrupt (SEFI) susceptibility on different Linux operating system configurations. The device-under-test (DUT) was the Xilinx Zynq-7020 SoC on the TUL PYNQ-Z2 board. The device was monitored for kernel panics or hangs, classified as SEFIs, to observe any differences in the SEFI cross sections between operating system configurations. The primary purpose of this experiment was to observe if the number of drivers installed in a Linux system affects its overall execution reliability.

Seth S Roffe↗

Functionality of the Python Packages for the HERMES Mission

The Heliophysics Environmental and Radiation Measurement Experiment Suite (HERMES) is a set of four instruments that will fly on the Lunar Gateway, an orbital outpost which will support Artemis lunar operations. HERMES will focus on understanding the causes of space-weather variability as driven by the Sun and modulated by the magnetosphere. In this talk, we will discuss the open source approach of the HERMES Science Operation Center (SOC) team being implemented in a number of Python packages which all work together. We will describe the core package which contains Python interfaces for the loading, calibrating, plotting, validating, and saving of measurement data through Common Data Format (CDF) files making use of pycdf provided by spacepy. Each instrument also has a Python package developed using a package template and will provide specific calibration and processing functionality to each instrument. The packages make extensive use of the scientific Python ecosystem and maintain compatibility with PyHC standards. The abstraction of intricate, high heritage data formats, such as CDF files, in Python enables easier analysis and opens doors for greater participation in heliophysics science.

hermes↗

James Webb Space Telescope Navigation Optimization Challenges

The James Webb Space Telescope (JWST) is a NASA flagship mission launched on December 25, 2021. The early orbit phase was highlighted by three midcourse correction burns that were performed to maneuver the vehicle into a libration orbit at the second Sun-Earth-Moon (SEM) libration point (L2). During the coast to L2, the vehicle’s primary observatory and sunshield were deployed. Once the tennis-court-sized sunshield was unfurled and tensioned into place, the large area exposed to solar radiation pressure (SRP) dictated that the SRP force model would need to account for the vehicle’s geometry, reflective properties, and orientation relative to the Sun. Following the insertion of JWST into its L2 libration orbit on January 24, 2022, the commissioning phase for the vehicle’s observatory commenced along with the first cycle of routine station-keeping maneuvers. The NASA Goddard Space Flight Center’s Flight Dynamics Facility (FDF) provides navigation services for the JWST mission. The FDF serves as the prime or backup navigation operations center for more than 30 active missions spanning a wide array of flight regimes performing orbit determination, maneuver planning, trajectory optimization, and tracking data evaluation. Definitive orbit determination for JWST is performed by the FDF using an Extended Kalman Filter (EKF) to estimate the vehicle’s trajectory and reflective properties using Deep Space Network (DSN) TRK-2-34 tracking data and spacecraft attitude telemetry. For the purposes of orbit prediction and station-keeping maneuver targeting, the sensitivity of the SRP force to the vehicle’s orientation requires that predictive attitude information must be incorporated to generate accurate orbit predictions and maneuver plans. Predictive attitude plans are provided to the FDF by the JWST Spacecraft Operations Center (SOC). Short-term (28 day) orbit predictions are propagated using a Short Range Attitude Plan (SRAP) to model the vehicle’s future attitude states for up to a week. SRAP attitude data is highly reliable, as it reflects finalized planned attitude states that the vehicle will be commanded to attain during the ensuing week. A Long Range Attitude Plan (LRAP) can be implemented to model predicted attitude states beyond one week, but these predictions are tentative and subject to revision due to changes in science operations plans. Instead, a conservative approach of applying a Sun-Pointing Neutral (SPN) attitude configuration is utilized for long-term (2 year) orbit predictions where reliable planned attitude data is not available. SPN attitude mode aligns the net SRP force along the JWST-to-Sun vector where it becomes independent of the vehicle’s angle of rotation about this vector, defined as the Sun yaw. Given the dynamic instability of the libration orbit, station-keeping thrust must be applied in either the sunward or anti-sunward direction to balance the resulting orbit. The attitude constraints of the vehicle also impose limits on the available pointing directions for station-keeping thrusters. The thrusters cannot be aligned with the optimal pointing direction for sunward maneuvers, rendering sunward maneuvers to be significantly less fuel efficient than anti-sunward maneuvers. Consequently, station-keeping maneuvers must be targeted to balance the orbit while ensuring that the next maneuver will also be performed in the anti-sunward direction to optimize propellant usage. When targeting a station-keeping maneuver, the attitude and SRP modeling configuration which is applied to the predicted post-maneuver trajectory will dictate the direction of the subsequent station-keeping maneuver, assuming nominal propulsion system performance. If the predicted post-maneuver attitude states result in an SRP model which under-predicts the cumulative SRP impact on the post-maneuver orbit, a targeted anti-sunward maneuver will be larger than necessary and the next maneuver will need to be executed sunward in order to compensate. In contrast, an anti-sunward maneuver which is targeted using an SRP model which over-predicts the cumulative SRP impact will achieve station-keeping while ensuring that the next maneuver will likewise be performed anti-sunward. For this reason, station-keeping maneuvers are targeted while applying the SPN attitude mode, as this mode entails the largest possible SRP area cross-section and therefore a larger modeled cumulative SRP impact. This paper documents the NASA Goddard Space Flight Center’s FDF support for JWST on-orbit operations and the analysis projects undertaken utilizing the experiences and data accumulated throughout the first full year of routine science operations. The results of these analysis efforts have been used to implement improvements to orbit prediction accuracy and maneuver efficiency which have the potential to prolong the lifespan of JWST to continue to conduct ground-breaking infrared astronomy for decades to come.

Flight Dynamics↗

Optimal Mission Profile for Low-Boom Supersonic Aircraft

An optimal mission profile, called the low-boom mission profile, is proposed for low-boom supersonic aircraft. The low-boom mission profile uses a fixed AoA for the cruise segment until reaching the cruise ceiling. The fixed AoA is determined by the cruise condition for the low-boom shaping of the aircraft. The derived CL trajectory is not necessarily the optimal trajectory for the cruise range when unrestricted supersonic flight is allowed. The undertrack sonic boom ground noise level is reduced during the cruise because of the increasing altitude from the fixed AoA trajectory and the approximate invariance of nondimensional overpressure at 3BL below a supersonic aircraft with respect to cruise altitude change when the AoA and cruise Mach are fixed. The approximate invariance of nondimensional overpressure at 3BL below a supersonic aircraft is verified using both Euler and Reynolds-averaged Navier-Stokes CFD solvers. A low-boom supersonic transport concept is used to illustrate that, compared to the fixed cruise altitude trajectory, the low-boom mission profile can increase the cruise range of a low-boom aircraft and reduce the undertrack sonic boom ground noise levels for the entire cruise segment. One significant contribution of this paper is the implication that an aircraft OML satisfying a sonic boom ground noise level constraint at SOC will satisfy the same noise level constraint over the entire cruise segment, as long as a fixed AoA trajectory is flown.

Low-boom characteristics↗

Early Evaluation of IBM BlueGene/P

BlueGene/P (BG/P) is the second generation BlueGene architecture from IBM, succeeding BlueGene/L (BG/L). BG/P is a system-on-a-chip (SoC) design that uses four PowerPC 450 cores operating at 850 MHz with a double precision, dual pipe floating point unit per core. These chips are connected with multiple interconnection networks including a 3-D torus, a global collective network, and a global barrier network. The design is intended to provide a highly scalable, physically dense system with relatively low power requirements per flop. In this paper, we report on our examination of BG/P, presented in the context of a set of important scientific applications, and as compared to other major large scale supercomputers in use today. Our investigation confirms that BG/P has good scalability with an expected lower performance per processor when compared to the Cray XT4 s Opteron. We also find that BG/P uses very low power per floating point operation for certain kernels, yet it has less of a power advantage when considering science-driven metrics for mission applications.

99 GENERAL AND MISCELLANEOUS↗

In situ x-ray absorption spectroscopic study of the Li[Ni[subscript 1/3]Co[subscript 1/3]Mn[subscript 1/3]]O[subscript 2]

The layered LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} system has recently drawn considerable interest for use as a cathode material for rechargeable lithium batteries. In order to investigate the charge-compensation mechanism and structural perturbations occurring in the system during cycling, in situ x-ray absorption spectroscopy (XAS) measurements were performed utilizing a novel electrochemical in situ cell specifically designed for long term x-ray experiments. The cell was cycled at a moderate rate through a typical Li-ion battery operating voltage range (2.9-4.7 V). The electrode contained 2.025 mg of LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} on a 25-{micro}m Al foil and had an area of 0.79 cm{sup 2}. The x-ray absorption spectroscopy (XAS) measurements were performed at the Ni, Co, and the Mn edges at different states of charge (SOC) during cycling, revealing details about the response of the cathode to Li insertion and extraction processes. Changes of bond distance and coordination number of Ni, Co, and Mn absorbers as a function of the state of charge of the material were obtained from the extended x-ray-absorption fine structure (EXAFS) region of the spectra. The x-ray absorption near-edge structure (XANES) region was studied in order to characterize the oxidation states of the 3d transition metals during cycling (Li extraction/insertion). We found that oxidation states of transition metals in LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} are Ni{sup 2+}, Co{sup 3+}, and Mn{sup 4+}, whereas during charging Ni{sup 2+} is oxidized to Ni{sup 4+} through an intermediate stage of Ni{sup 3+}, Co{sup 3+} is oxidized almost to Co{sup 4+} and, utilizing Faraday's calculation and XAS results, the Co was found to be at Co{sup 3.92+} at the end of the charge, while Mn was found to be electrochemically inactive and remains as Mn{sup 4+}. The EXAFS data that were collected continuously during cycling revealed details about the response of the cathode to Li insertion and extraction. These measurements on the LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} cathode confirmed that the material retains its symmetry and good structural short-range order leading to superior cycling.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Noncovalent Interaction Energies in Covalent Complexes: TEM-1 beta-Lactamase and beta-Lactams

The class A {beta}-lactamase TEM-1 is a key bacterial resistance enzyme against {beta}-lactam antibiotics, but little is known about the energetic bases for complementarity between TEM-1 and its inhibitors. Most inhibitors form a covalent adduct with the catalytic Ser70, making the measurement of equilibriumconstants, and hence interaction energies, technically difficult. This study evaluates noncovalent interactions withincovalent complexes by examining the differential stability of TEM-1 and its inhibitor adducts. The thermal denaturation of TEM-1 follows a two-state, reversible model with a melting temperature (T{sub m}) of 51.6 C and a van't Hoff enthalpy of unfolding ({Delta}H{sub VH}) of 146.2 kcal/mol at pH 7.0. The stability of the enzyme changes on forming an inhibitor adduct. As expected, some inhibitors stabilize TEM-1; transition-state analogues increase the T{sub m} by up to 3.7 C(1.7 kcal/mol). Surprisingly, all {beta}-lactam covalent acyl-enzyme complexes tested destabilize TEM-1 significantly relative to the apoenzyme. For instance, the clinically used inhibitor clavulanic acid and the {beta}-lactamase-resistant {beta}-lactams moxalactam and imipenem destabilize TEM-1 by over 2.6 C (1.2 kcal/mol) in their covalent adducts. Based on the structure of the TEM-1/imipenem complex (Maveyraud et al., J Am Chem Soc 1998;120:9748-52), destabilization by moxalactam and imipenem is thought to be caused by a steric clash between the side-chain of Asn132 and the 6(7)-{alpha} group of these {beta}-lactams. To test this hypothesis, the mutant enzyme N132A was made. In contrast with wild-type, the covalent complexes between N132A and both imipenem and moxalactam stabilize the enzyme, consistent with the hypothesis. To investigate the structural bases of this dramatic change instability, the structure of N132A/imipenem was determined by X-ray crystallography. In the complex with N132A, imipenemadopts a very different conformation from that observed in the wild-type complex, and the putative destabilizing interaction with residue 132 is relieved. Studies of several enzymes suggest that {beta}-lactams, andcovalent inhibitors in general, can have either net favorable or net unfavorable noncovalent interaction energies within the covalent complex. In the case of TEM-1, such unfavorable interactions convert substrate analogues into very effective inhibitors.

60 APPLIED LIFE SCIENCES↗

Cu K-edge X-ray Absorption Spectroscopy Reveals Differential Copper Coordimation Within Amyloid-beta Oligomers Compared to Amyloid-beta Monomers

The fatal neurodegenerative disorder Alzheimer's disease (AD) has been linked to the formation of soluble neurotoxic oligomers of amyloid-{beta} (A{beta}) peptides. These peptides have high affinities for copper cations. Despite their potential importance in AD neurodegeneration few studies have focused on probing the Cu{sup 2+/1+} coordination environment within A{beta} oligomers. Herein we present a Cu K-edge X-ray absorption spectroscopic study probing the copper-coordination environment within oligomers of A{beta}(42) (sequence: DAEFRHDSGYEVHHQKLVFFAEDVGSNKGAIIGLMVGGVVIA). We find that the Cu{sup 2+} cation is contained within a square planar mixed N/O ligand environment within A{beta}(42) oligomers, which is similar to the copper coordination environment of the monomeric forms of {l_brace}Cu{sup II}A{beta}(40){r_brace} and {l_brace}Cu{sup II}A{beta}(16){r_brace}. Reduction of the Cu{sup 2+} cation within the A{beta}(42) oligomers to Cu{sup 1+} yields a highly dioxygen sensitive copper-species that contains Cu{sup 1+} in a tetrahedral coordination geometry. This can be contrasted with monomers of {l_brace}Cu{sup I}A{beta}(40){r_brace} and {l_brace}Cu{sup I}A{beta}(16){r_brace}, which contain copper in a dioxygen inert linear bis-histidine ligand environment [Shearer and Szalai, J. Am. Chem. Soc., 2008, 130, 17826]. The biological implications of these findings are discussed.

59 BASIC BIOLOGICAL SCIENCES↗

Application of Gaussian Process Modeling to Analysis of Functional Unreliability

This paper applies Gaussian Process (GP) modeling to analysis of the functional unreliability of a “passive system.” GPs have been used widely in many ways [1]. The present application uses a GP for emulation of a system simulation code. Such an emulator can be applied in several distinct ways, discussed below. All applications illustrated in this paper have precedents in the literature; the present paper is an application of GP technology to a problem that was originally analyzed [2] using neural networks (NN), and later [3, 4] by a method called “Alternating Conditional Expectations” (ACE). This exercise enables a multifaceted comparison of both the processes and the results. Given knowledge of the range of possible values of key system variables, one could, in principle, quantify functional unreliability by sampling from their joint probability distribution, and performing a system simulation for each sample to determine whether the function succeeded for that particular setting of the variables. Using previously available system simulation codes, such an approach is generally impractical for a plant-scale problem. It has long been recognized, however, that a well-trained code emulator or surrogate could be used in a sampling process to quantify certain performance metrics, even for plant-scale problems. “Response surfaces” were used for this many years ago. But response surfaces are at their best for smoothly varying functions; in regions of parameter space where key system performance metrics may behave in complex ways, or even exhibit discontinuities, response surfaces are not the best available tool. This consideration was one of several that drove the work in [2]. In the present paper, (1) the original quantification of functional unreliability using NN [2], and later ACE [3], is reprised using GP; (2) additional information provided by the GP about uncertainty in the limit surface, generally unavailable in other representations, is discussed; (3) a simple forensic exercise is performed, analogous to the inverse problem of code calibration, but with an accident management spin: given an observation about containment pressure, what can we say about the system variables? References 1. For an introduction to GPs, see (for example) Gaussian Processes for Machine Learning, C. E. Rasmussen and C. K. I. Williams (MIT, 2006). 2. Reliability Quantification of Advanced Reactor Passive Safety Systems, J. J. Vandenkieboom, PhD Thesis (University of Michigan, 1996). 3. Z. Cui, J. C. Lee, J. J. Vandenkieboom, and R. W. Youngblood, “Unreliability Quantification of a Containment Cooling System through ACE and ANN Algorithms,” Trans. Am. Nucl. Soc. 85, 178 (2001). 4. Risk and Safety Analysis of Nuclear Systems, J. C. Lee and N. J. McCormick (Wiley, 2011). See especially §11.2.4.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Regulation control and energy management scheme for wireless power transfer

Power transfer rate at a charging facility can be maximized by employing a feedback scheme. The state of charge (SOC) and temperature of the regenerative energy storage system (RESS) pack of a vehicle is monitored to determine the load due to the RESS pack. An optimal frequency that cancels the imaginary component of the input impedance for the output signal from a grid converter is calculated from the load of the RESS pack, and a frequency offset f* is made to the nominal frequency f.sub.0 of the grid converter output based on the resonance frequency of a magnetically coupled circuit. The optimal frequency can maximize the efficiency of the power transfer. Further, an optimal grid converter duty ratio d* can be derived from the charge rate of the RESS pack. The grid converter duty ratio d* regulates wireless power transfer (WPT) power level.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Optimizing Battery Usage and Management for Long Life

This presentation discusses the impact of system design factors on battery aging and end of life. Topics include sizing of the SOC operating window, cell balancing and thermal management systems and their value in reducing pack degradation rates and cell imbalance growth over lifetime.

25 ENERGY STORAGE↗

OpenSoC Fabric

Recent advancements in technology scaling have shown a trend towards greater integration with large-scale chips containing thousands of processors connected to memories and other I/O devices using non-trivial network topologies. Software simulation proves insufficient to study the tradeoffs in such complex systems due to slow execution time, whereas hardware RTL development is too time-consuming. We present OpenSoC Fabric, an on-chip network generation infrastructure which aims to provide a parameterizable and powerful on-chip network generator for evaluating future high performance computing architectures based on SoC technology. OpenSoC Fabric leverages a new hardware DSL, Chisel, which contains powerful abstractions provided by its base language, Scala, and generates both software (C++) and hardware (Verilog) models from a single code base. The OpenSoC Fabric2 infrastructure is modeled after existing state-of-the-art simulators, offers large and powerful collections of configuration options, and follows object-oriented design and functional programming to make functionality extension as easy as possible.

Source record↗

LLRF System for the Fermilab Muon g-2 and Mu2e Projects

The Mu2e experiment measures the conversion rate of muons into electrons and the Muon g-2 experiment measures the muon magnetic moment. Both experiments require 53 MHz batches of 8 GeV protons to be re-bunched into 150 ns, 2.5 MHz pulses for extraction to the g-2 target for Muon g-2 and to a delivery ring with a single RF cavity running at 2.36 MHz for Mu2e. The LLRF system for both experiments is implemented in a SOC FPGA board integrated into the existing 53 MHz LLRF system in a VXI crate. The tight timing requirements, the large frequency difference and the non-harmonic relationship between the two RF systems provide unique challenges to the LLRF system design to achieve the required phase alignment specifications for beam formation, transfers and beam extinction between pulses. The new LLRF system design for both projects is described and the results of the initial beam commissioning tests for the Muon g-2 experiment are presented.

43 PARTICLE ACCELERATORS↗

Extreme Fast Charging of Lithium-Ion Battery: Understanding Bottlenecks and Safety Issues

Currently, graphite-based lithium-ion battery (LIB) packs in the electric vehicle (EV) domain can accommodate a charging rate up to 2C, which translates into a 0.5 to 1h recharge time [1-2]. Reducing the recharge time down to 10-15 min range would reduce the gap between the internal combustion engine’s refueling time and EV’s recharge time. Minimizing this gap is seen as attractive to consumers and would eventually enhance the adoption of EVs [1-3]. Significant research activity has been going on globally to understand the scientific limitations associated with high rate charging [4-6]. Extreme fast charging (XFC) of Li-ion batteries can create LIB life and safety issues [1, 7]. Among the issues are shortened battery life and enhanced safety concerns due to potential short creation by Li dendrites [1-2]. The detection and monitoring of Li plating onset and evolution over aging is a significant challenge. In-operando detection schemes to understand the dynamics of Li plating and the role that aging has on Li plating are vital to enable fast charging of specific energy cells. A key to the effort would be understanding the interplay between materials, electrode structure, and use conditions. This presentation will discuss the key bottlenecks of aggressive fast charging (~10 min). In particular, how extreme fast charging impacts individual battery components as well as the overall battery’s performance, life, and safety will be presented in light of experimental results and analysis. The effectiveness and challenges of in-operando electrochemical detection methods in aggressive charging conditions shall also be discussed. References [1] S. Ahmed, I. Bloom, A. N. Jansen, T. R. Tanim, E. J. Dufek, A. Pesaran, A. Burnham, R. B. Carlson, F. Dias, K. Hardy,M. Keyser, C. Kreuzer, A. Markel, A. Meintz, C. Michelbacher, M. Mohanpurkar, P. A. Nelson, D. C. Robertson, D. Scoffield,M. Shirk, T. Stephens, R. Vijayagopal, J. Zhang, Enabling fast charging–A battery technology gap assessment, J Power Sources,367 (2017), 250-262 [2] T.R. Tanim, M. G. Shirk, R. L. Bewley, E. J. Dufek, B. Y. Liaw, Fast charge implications: Pack and cell analysis and comparison,, J Power Sources, 381 (2018) 56-65 [3] N. Lutsey, S. Searle, S. Chambliss, and A. Bandivadekar, Assessment of leading electric vehicle promotion activities inUnited States cities, International Council on Clean Transportation, July 2015 [4] C. Michelbacher, S. Ahmed, I. Bloom, A. Burnham, B. Carlson, F. Dias, E. J. Dufek, A. N Jansen, M. Keyser, A. Markel,A. Meintz, M. Mohanpurkar, A. Pesaran, D. Scoffield, M. Shirk, T. Stephens, T. R. Tanim, R. Vijayagopal, J. Zhang, Enablingfast charging–Introduction and overview, J Power Sources, [5] E-Mobility: New Possibilities with 800-volt charging, Porsche newsroom, https://newsroom.porsche.com/en/technology/porsche-engineering-e-power-electromobility-800-volt-charging-12720.html(accessed Sep 2017) [6] Charging interface initiative e.V. - Industry statement on future charging infrastructure, available at: http://www.charinev.org/fileadmin/Downloads/Papers_and_Regulations/CharIN_industry_statement.pdf(accessed June 2017) [7] T. Waldmann, B. Hogg,M. Kasper, S. Grolleau, C. Couceiro, K. Trad, B. P. Matadi and M. Wohlfahrt-Mehrens, Interplay ofOperational Parameters on Lithium Deposition in Lithium-Ion Cells: Systematic Measurements with Reconstructed 3-ElectrodePouch Full Cells, J. Electrochem. Soc. 163 (7) (2016) A1232-A1238

25 ENERGY STORAGE↗

Sensitivity Analysis of an LCC-LCC Compensated 20-kW Bidirectional Wireless Charging System for Medium-Duty Vehicles

In this paper, sensitivity analysis of an LCC-LCC compensated bidirectional wireless charging system is presented. In a wireless charging system for electric vehicle applications, the effective load impedance varies significantly with the state-of-charge (SOC)of the battery. Due to the change in system parameters, resonant frequency, and transferred power, the efficiency of the system varies significantly. Sensitivity analysis of the system characteristics reveals the optimal operating region and required control strategy to operate within that region. Sensitivity analysis is even more important for a bidirectional system with mismatched input and output voltage levels. In this paper, the sensitivity of a bidirectional 20 kW wireless charging system is investigated analytically and the results are validated experimentally. The experimental results for a geometrically matched Double-D (DD) coil-based LCC-LCC tuned bidirectional WCS with asymmetric voltage levels show that the voltage gains and input impedance of the system are highly sensitive near the resonant frequency.

Mostak, Mostak Mohammad↗

Eurycea lucifuga (Cave Salamander). Diet.

Eurycea lucifuga is a common and widespread facultative inhabitant of caves and springs in the southeastern and central United States (Powell et al. 2016. Peterson Field Guide to Reptiles and Amphibians of Eastern and Central North America. Houghton Mifflin Harcourt, Boston, Massachusetts. 512 pp.). This species is known to feed on a variety of invertebrates, such as snails, crustaceans, beetles, and flies (Peck 1974. Nat. Speleol. Soc. Bull. 36:7–10). Although several millipede species also can serve as prey for E. lucifuga, some are presumably avoided due to the presence of defensive secretions (e.g., Abacionidae, Paradoxosomatidae). Captive feeding trials and field study show that E. lucifuga do not actively prey upon cave-obligate Tetracion millipedes, which produce defensive secretions comprised primarily of the compound p-cresol (Peck and Richardson 1976. Annales de Speleologie 31:175–182). On the other hand, Pseudotremia millipedes, which do not possess chemical defenses, are a significant component of the diet of cave-dwelling E. lucifuga (Peck and Richardson 1976, op. cit.)

59 BASIC BIOLOGICAL SCIENCES↗