Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Deteriorated hardened cement paste structure analyzed by XPS and {sup 29}Si NMR techniques

In this report, X-ray photoelectron spectroscopy (XPS) and {sup 29}Si-MAS-NMR was used for the evaluation of deteriorated hardened cement pastes. The deterioration by ammonium nitrate solution was accompanied by changes in the pore structure as well as by structural changes in the C–S–H in the hardened cement paste. The CaO/SiO{sub 2} ratio of the C–S–H decreased with the progress of deterioration, there was also polymerization of the silicate in the C–S–H. It was confirmed that the degree of polymerization of silicate of the C–S–H in hardened cement paste can be determined by XPS. It was also shown that the polymerization depends on the structure of the C–S–H. -- Highlights: •The polymerization of silicate of the C–S–H in the HCP can be observed by XPS. •The structure of C–S–H changed with the degree of calcium leaching. •The NMR result about silicate in C–S–H was in good agreement with the XPS result.

36 MATERIALS SCIENCE↗

Carbonation of C–S–H and C–A–S–H samples studied by {sup 13}C, {sup 27}Al and {sup 29}Si MAS NMR spectroscopy

Synthesized calcium silicate hydrate (C–S–H) samples with Ca/Si ratios of 0.66, 1.0, and 1.5 have been exposed to atmospheric CO{sub 2} at room temperature and high relative humidity and studied after one to 12 weeks. {sup 29}Si NMR reveals that the decomposition of C–S–H caused by carbonation involves two steps and that the decomposition rate decreases with increasing Ca/Si ratio. The first step is a gradual decalcification of the C–S–H where calcium is removed from the interlayer and defect sites in the silicate chains until Ca/Si = 0.67 is reached, ideally corresponding to infinite silicate chains. In the seconds step, calcium from the principal layers is consumed, resulting in the final decomposition of the C–S–H and the formation of an amorphous silica phase composed of Q{sup 3} and Q{sup 4} silicate tetrahedra. The amount of solid carbonates and of carbonate ions in a hydrous environment increases with increasing Ca/Si ratio for the C–S–H, as shown by {sup 13}C NMR. For C–A–S–H samples with Ca/Si = 1.0 and 1.5, {sup 27}Al NMR demonstrates that all aluminium sites associated with the C–S–H are consumed during the carbonation reactions and incorporated mainly as tetrahedral Al(–OSi){sub 4} units in the amorphous silica phase. A small amount of penta-coordinated Al sites has also been identified in the silica phase.

36 MATERIALS SCIENCE↗

Hf-W chronology of ordinary chondrites

Fifteen H, L, and LL ordinary chondrites of petrologic types 4–6 have been analyzed for Hf-W isotope systematics to constrain the chronology, internal structure, and thermal history of their parent bodies. For most samples coarse-grained metals plot below the isochrons defined by silicate-dominated fractions which consist of variable mixtures of silicate minerals with tiny metal inclusions. This offset results from an earlier Hf-W closure in the large metal grains and provides a new means for simultaneously determining cooling rates and Hf-W closure ages for individual samples. For most type 5 and 6 samples, cooling rates and Hf-W ages are inversely correlated, indicating that these samples derive from concentrically zoned bodies in which more strongly metamorphosed samples derive from greater depth. These data, therefore, provide strong evidence for a common ‘onion shell’ structure for the H, L, and LL chondrite parent bodies. The cooling rates and Hf-W ages of some type 5 and 6 chondrites overlap, indicating that the Hf-W systematics provide a more robust measure of the thermal history and burial depth of a given sample than the simple petrographic distinction between types 5 and 6. Two type 6 samples deviate from the correlation between cooling rates and Hf-W ages and cooled much faster than expected for their Hf-W age. These samples likely were excavated by impacts that occurred during high-temperature metamorphism and prior to complete closure of the Hf-W system at ~10 Ma after CAI formation. As these impacts would have disturbed the asteroid’s cooling history, these samples likely derive from different bodies than samples with undisturbed cooling histories, implying that ordinary chondrites derive from more than just three parent bodies. The Hf-W data reveal that metal-silicate fractionation among the H, L, and LL groups occurred between ~2 and ~2.7 Ma after CAI formation and, hence, was about coeval to chondrule formation. As both metal-silicate fractionation and chondrule formation occurred prior to chondrite parent body accretion, there should be no ordinary chondrite chondrules that are younger than ~2.7 Ma. In conclusion, ordinary chondrite precursors had lower Hf/W ratios than carbonaceous chondrites, suggesting that inner and outer solar system materials, respectively, were chemically distinct even for refractory elements.

36 MATERIALS SCIENCE↗

Tb/Na tobermorite: Thermal behaviour and high temperature products

By heating a sample of Tb/Na tobermorite we obtained a phase which was identified through its X-ray diffraction (XRD) pattern, as terbium silicate apatite. Subsequently this compound has been directly prepared by solid state reaction and we carried out a structural refinement from XRD data in space group P6{sub 3}/m obtaining cell parameters a=9.39199(4) A and c=6.84041(5) A. Terbium silicate apatite heated in melted NaF led to Tb{sub 4}O{sub 7} crystals. - Graphical Abstract: By heating over 900 deg. C Tb/Na tobermorite a terbium silicate apatite was obtained. The same product has been independently prepared and structurally characterized from powder diffraction data. Attempts of crystallizing terbium silicate apatite from melted NaF led to Tb{sub 4}O{sub 7} crystals.

36 MATERIALS SCIENCE↗

Extraction of lead from waste CRT funnel glass by generating lead sulfide – An approach for electronic waste management

Highlights: • Sodium carbonate and free silica in the glass react to generate sodium silicate and carbon dioxide. • Sodium sulfide and lead silicate group of glass began to react to lead sulfide and sodium silicate. • Lead sulfide got together in the bottom of the crucible under the action of gravity. • The generated lead sulfide was separated and collected in the bottom of the crucible. - Abstract: Waste cathode ray tube (CRT) funnel glass is the key and difficult points in waste electrical and electronic equipment (WEEE) disposal. In this paper, a novel and effective process for the detoxification and reutilization of waste CRT funnel glass was developed by generating lead sulfide precipitate via a high-temperature melting process. The central function in this process was the generation of lead sulfide, which gathered at the bottom of the crucible and was then separated from the slag. Sodium carbonate was used as a flux and reaction agent, and sodium sulfide was used as a precipitating agent. The experimental results revealed that the lead sulfide recovery rate initially increased with an increase in the amount of added sodium carbonate, the amount of sodium sulfide, the temperature, and the holding time and then reached an equilibrium value. The maximum lead sulfide recovery rate was approximately 93%, at the optimum sodium carbonate level, sodium sulfide level, temperature, and holding time of 25%, 8%, 1200 °C, and 2 h, respectively. The glass slag can be made into sodium and potassium silicate by hydrolysis in an environmental and economical process.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Photoemission spectroscopy study of the lanthanum lutetium oxide/silicon interface

Rare earth oxides are promising candidates for future integration into nano-electronics. A key property of these oxides is their ability to form silicates in order to replace the interfacial layer in Si-based complementary metal-oxide field effect transistors. In this work a detailed study of lanthanum lutetium oxide based gate stacks is presented. Special attention is given to the silicate formation at temperatures typical for CMOS processing. The experimental analysis is based on hard x-ray photoemission spectroscopy complemented by standard laboratory experiments as Rutherford backscattering spectrometry and high-resolution transmission electron microscopy. Homogenously distributed La silicate and Lu silicate at the Si interface are proven to form already during gate oxide deposition. During the thermal treatment Si atoms diffuse through the oxide layer towards the TiN metal gate. This mechanism is identified to be promoted via Lu-O bonds, whereby the diffusion of La was found to be less important.

36 MATERIALS SCIENCE↗

Highly spatially resolved structural and optical investigation of Bi nanoparticles in Y-Er disilicate thin films

Er-containing silicon compatible materials have been widely used as infrared emitters for microphotonics application. In this field, the additional introduction of a proper sensitizer permits to increase the Er excitation cross sections, thus increasing its optical efficiency. This work aims to investigate the influence of a post-transition metal, bismuth, on the optical properties of erbium-yttrium disilicate thin films synthesized by magnetron co-sputtering. After thermal treatments at 1000 °C in O{sub 2} or N{sub 2} environment, the presence of small precipitates, about 6 nm in diameter, was evidenced by transmission electron microscopy analyses. The spatially resolved chemical nature of the nanoparticles was discerned in the Si and O rich environments by means of scanning transmission electron microscopy–energy dispersive X-ray and scanning transmission electron microscopy–electron energy loss spectroscopy analyses performed with nanometric resolution. In particular, metallic Bi nanoparticles were stabilized in the N{sub 2} environment, being strongly detrimental for the Er emission. A different scenario was instead observed in O{sub 2}, where the formation of Bi silicate nanoparticles was demonstrated with the support of photoluminescence excitation spectroscopy. In particular, a broad band peaked at 255 nm, correlated to the excitation band of Bi silicate nanoparticles, was identified in Er excitation spectrum. Thus Bi silicate clusters act as sensitizer for Er ions, permitting to improve Er emission up to 250 times with respect to the resonant condition. Moreover, the Er decay time increases in the presence of the Bi silicate nanoparticles that act as cages for Er ions. These last results permit to further increase Er optical efficiency in the infrared range, suggesting (Bi + Er)-Y disilicate as a good candidate for applications in microphotonics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coal fly ash and phospho-gypsum mixture as an amendment to improve rice paddy soil fertility

Rice is a plant that requires high levels of silica (Si). As a silicate NOD source to rice, coal fly ash (hereafter, fly ash), which has an alkaline pH and high available silicate and boron (B) contents, was mixed with phosphor-gypsum (hereafter, gypsum, 50%, wt wt{sup -1}), a by-product from the production of phosphate fertilizer, to improve the fly ash limitation. Field experiments were carried out to evaluate the effect of the mixture on soil properties and rice (Oryza sativa) productivity in silt loam (SiL) and loamy sand (LS) soils to which 0 (FG 0), 20 (FG 20), 40 (FG 40), and 60 (FG 60) Mg ha{sup -1} were added. The mixture increased the amount of available silicate and exchangeable calcium (Ca) contents in the soils and the uptake of silicate by rice plant. The mixture did not result in accumulation of heavy metals in soil and an excessive uptake of heavy metals by the rice grain. The available boron content in soil increased with the mixture application levels up to 1.42 mg kg{sup -1} following the application of 60 Mg ha{sup -1} but did not show toxicity. The mixture increased significantly rice yield and showed the highest yields following the addition of 30-40 Mg ha{sup -1} in two soils. It is concluded that the fly ash and gypsum mixture could be a good source of inorganic soil amendments to restore the soil nutrient balance in rice paddy soil.

01 COAL, LIGNITE, AND PEAT↗

SPITZER/IRS 5-35 {mu}m LOW-RESOLUTION SPECTROSCOPY OF THE 12 {mu}m SEYFERT SAMPLE

We present low-resolution 5.5-35 {mu}m spectra for 103 galaxies from the 12 {mu}m Seyfert sample, a complete unbiased 12 {mu}m flux limited sample of local Seyfert galaxies selected from the IRAS Faint Source Catalog, obtained with the Infrared Spectrograph (IRS) on-board Spitzer Space Telescope. For 70 of the sources observed in the IRS mapping mode, uniformly extracted nuclear spectra are presented for the first time. We performed an analysis of the continuum emission, the strength of the polycyclic aromatic hydrocarbon (PAH) and astronomical silicate features of the sources. We find that on average, the 15-30 {mu}m slope of the continuum is ({alpha}{sub 15-30}) = -0.85 {+-} 0.61 for Seyfert 1s and -1.53 {+-} 0.84 for Seyfert 2s, and there is substantial scatter in each type. Moreover, nearly 32% of the Seyfert 1s, and 9% of the Seyfert 2s, display a peak in the mid-infrared spectrum at 20 {mu}m, which is attributed to an additional hot dust component. The PAH equivalent width decreases with increasing dust temperature, as indicated by the global infrared color of the host galaxies. However, no statistical difference in PAH equivalent width is detected between the two Seyfert types, 1 and 2, of the same bolometric luminosity. The silicate features at 9.7 and 18 {mu}m in Seyfert 1 galaxies are rather weak, while Seyfert 2s are more likely to display strong silicate absorption. Those Seyfert 2s with the highest silicate absorption also have high infrared luminosity and high absorption (hydrogen column density N{sub H} > 10{sup 23} cm{sup -2}) as measured from the X-rays. Finally, we propose a new method to estimate the active galactic nucleus contribution to the integrated 12 {mu}m galaxy emission, by subtracting the 'star formation component in the Seyfert galaxies, making use of the tight correlation between PAH 11.2 {mu}m luminosity and 12 {mu}m luminosity for star-forming galaxies.

99 GENERAL AND MISCELLANEOUS↗

DETECTIONS OF WATER ICE, HYDROCARBONS, AND 3.3 {mu}m PAH IN z {approx} 2 ULIRGs

We present the first detections of the 3 {mu}m water ice and 3.4 {mu}m amorphous hydrocarbon (HAC) absorption features in z {approx} 2 ULIRGs. These are based on deep rest-frame 2-8 {mu}m Spitzer Infrared Spectrograph spectra of 11 sources selected for their appreciable silicate absorption. The HAC-to-silicate ratio for our z {approx} 2 sources is typically higher by a factor of 2-5 than that observed in the Milky Way. This HAC 'excess' suggests compact nuclei with steep temperature gradients as opposed to predominantly host obscuration. Beside the above molecular absorption features, we detect the 3.3 {mu}m polycyclic aromatic hydrocarbon (PAH) emission feature in one of our sources with three more individual spectra showing evidence for it. Stacking analysis suggests that water ice, hydrocarbons, and PAH are likely present in the bulk of this sample even when not individually detected. The most unexpected result of our study is the lack of clear detections of the 4.67 {mu}m CO gas absorption feature. Only three of the sources show tentative signs of this feature at significantly lower levels than has been observed in local ULIRGs. Overall we find that the closest local analogs to our sources, in terms of 3-4 {mu}m color, HAC-to-silicate and ice-to-silicate ratios, as well as low PAH equivalent widths, are sources dominated by deeply obscured nuclei. Such sources form only a small fraction of ULIRGs locally and are commonly believed to be dominated by buried active galactic nuclei (AGNs). Our sample suggests that, in an absolute number, such buried AGNs are at least an order of magnitude more common at z {approx} 2 than today. The presence of PAH suggests that significant levels of star formation are present even if the obscured AGNs typically dominate the power budget.

79 ASTRONOMY AND ASTROPHYSICS↗

FIVE YEARS OF MID-INFRARED EVOLUTION OF THE REMNANT OF SN 1987A: THE ENCOUNTER BETWEEN THE BLAST WAVE AND THE DUSTY EQUATORIAL RING

We have used the Spitzer satellite to monitor the mid-IR evolution of SN 1987A over a five year period spanning the epochs between days {approx}6000 and 8000 since the explosion. The supernova (SN) has evolved into a supernova remnant and its radiative output is dominated by the interaction of the SN blast wave with the pre-existing equatorial ring (ER). The mid-IR spectrum is dominated by emission from {approx}180 K silicate dust, collisionally heated by the hot X-ray emitting gas with a temperature and density of {approx}5 x 10{sup 6} K and {approx}3 x 10{sup 4} cm{sup -3}, respectively. The mass of the radiating dust is {approx}1.2 x 10{sup -6} M{sub sun} on day 7554 and scales linearly with IR flux. Comparison of the IR data with the soft X-ray flux derived from Chandra observations shows that the IR-to-X-ray flux ratio, IRX, is roughly constant with a value of 2.5. Gas-grain collisions therefore dominate the cooling of the shocked gas. The constancy of IRX is most consistent with the scenario that very little grain processing or gas cooling has occurred throughout this epoch. The shape of the dust spectrum remained unchanged during the observations while the total flux increased by a factor of {approx}5 with a time dependence of t'{sup 0.87{+-}0.20}, t' being the time since the first encounter between the blast wave and the ER. These observations are consistent with the transitioning of the blast wave from free expansion to a Sedov phase as it propagates into the main body of the ER, as also suggested by X-ray observations. The constant spectral shape of the IR emission provides strong constraints on the density and temperature of the shocked gas in which the interaction takes place. Silicate grains, with radii of {approx}0.2 {mu}m and temperature of T {approx} 180 K, best fit the spectral and temporal evolution of the {approx}8-30 {mu}m data. The IR spectra also show the presence of a secondary population of very small, hot (T {approx}> 350 K), featureless dust. If these grains spatially coexist with the silicates, then they must have shorter lifetimes. The data show slightly different rates of increase of their respective fluxes, lending some support to this hypothesis. However, the origin of this emission component and the exact nature of its relation to the silicate emission is still a major unsolved puzzle.

79 ASTRONOMY AND ASTROPHYSICS↗

DUST GRAIN EVOLUTION IN SPATIALLY RESOLVED T TAURI BINARIES

Core-accretion planet formation begins in protoplanetary disks with the growth of small, interstellar medium dust grains into larger particles. The progress of grain growth, which can be quantified using 10 {mu}m silicate spectroscopy, has broad implications for the final products of planet formation. Previous studies have attempted to correlate stellar and disk properties with the 10 {mu}m silicate feature in an effort to determine which stars are efficient at grain growth. Thus far there does not appear to be a dominant correlated parameter. In this paper, we use spatially resolved adaptive optics spectroscopy of nine T Tauri binaries as tight as 0.''25 to determine if basic properties shared between binary stars, such as age, composition, and formation history, have an effect on dust grain evolution. We find with 90%-95% confidence that the silicate feature equivalent widths of binaries are more similar than those of randomly paired single stars, implying that shared properties do play an important role in dust grain evolution. At lower statistical significance, we find with 82% confidence that the secondary has a more prominent silicate emission feature (i.e., smaller grains) than the primary. If confirmed by larger surveys, this would imply that spectral type and/or binarity are important factors in dust grain evolution.

79 ASTRONOMY AND ASTROPHYSICS↗

CHARACTERIZATION OF PRESOLAR MATERIAL IN THE CR CHONDRITE NORTHWEST AFRICA 852

We investigated the inventory of presolar silicate, oxide, and silicon carbide (SiC) grains in the CR2 chondrite Northwest Africa (NWA) 852. Thirty-one O-anomalous grains were detected: 24 were identified as silicates ({approx}78 ppm); the remaining 7 are Al-rich oxides ({approx}38 ppm). NWA 852 is the first C2 chondrite containing O-anomalous presolar dust in concentrations comparable to other more primitive meteorites. Eight presolar SiC grains have been found, representing the highest abundance ({approx}160 ppm) observed so far in primitive meteorites. {sup 15}N-enriched matter is also present, although very heterogeneously distributed. Twenty-six of the O-anomalous grains are enriched in {sup 17}O, originating from the outflows of low-mass asymptotic giant branch (AGB) stars. We calculate a silicate/oxide abundance ratio of {approx}2, which indicates a higher degree of aqueous alteration than observed for other presolar-grain-rich meteorites. NWA 852 thus stands between the presolar-grain-rich CR3 chondrites (MET 00426, QUE 99177) and CR2 chondrites with low presolar grain abundances (Renazzo, NWA 530). We calculate an initial presolar silicate abundance of {approx}800 ppm for NWA 852, if silicate destruction by aqueous alteration is taken into account. Transmission electron microscope (TEM) investigation of one presolar Al-rich grain of an AGB star origin revealed that the grain mainly consists of a single crystal of hibonite with slightly varying orientations. A distinct subgrain (d < 100 nm) with a Ca/Ti ratio of {approx}1 is located in the central region, most likely indicating a perovskite-like phase. Our data suggest this phase to be a primary condensate and not an alteration product.

79 ASTRONOMY AND ASTROPHYSICS↗

THEORETICAL SPECTRA OF TERRESTRIAL EXOPLANET SURFACES

We investigate spectra of airless rocky exoplanets with a theoretical framework that self-consistently treats reflection and thermal emission. We find that a silicate surface on an exoplanet is spectroscopically detectable via prominent Si-O features in the thermal emission bands of 7-13 {mu}m and 15-25 {mu}m. The variation of brightness temperature due to the silicate features can be up to 20 K for an airless Earth analog, and the silicate features are wide enough to be distinguished from atmospheric features with relatively high resolution spectra. The surface characterization thus provides a method to unambiguously identify a rocky exoplanet. Furthermore, identification of specific rocky surface types is possible with the planet's reflectance spectrum in near-infrared broad bands. A key parameter to observe is the difference between K-band and J-band geometric albedos (A{sub g}(K) - A{sub g}(J)): A{sub g}(K) - A{sub g}(J) > 0.2 indicates that more than half of the planet's surface has abundant mafic minerals, such as olivine and pyroxene, in other words primary crust from a magma ocean or high-temperature lavas; A{sub g}(K) - A{sub g}(J) < -0.09 indicates that more than half of the planet's surface is covered or partially covered by water ice or hydrated silicates, implying extant or past water on its surface. Also, surface water ice can be specifically distinguished by an H-band geometric albedo lower than the J-band geometric albedo. The surface features can be distinguished from possible atmospheric features with molecule identification of atmospheric species by transmission spectroscopy. We therefore propose that mid-infrared spectroscopy of exoplanets may detect rocky surfaces, and near-infrared spectrophotometry may identify ultramafic surfaces, hydrated surfaces, and water ice.

79 ASTRONOMY AND ASTROPHYSICS↗

DUST IN A TYPE Ia SUPERNOVA PROGENITOR: SPITZER SPECTROSCOPY OF KEPLER'S SUPERNOVA REMNANT

Characterization of the relatively poorly understood progenitor systems of Type Ia supernovae is of great importance in astrophysics, particularly given the important cosmological role that these supernovae play. Kepler's supernova remnant, the result of a Type Ia supernova, shows evidence for an interaction with a dense circumstellar medium (CSM), suggesting a single-degenerate progenitor system. We present 7.5-38 {mu}m infrared (IR) spectra of the remnant, obtained with the Spitzer Space Telescope, dominated by emission from warm dust. Broad spectral features at 10 and 18 {mu}m, consistent with various silicate particles, are seen throughout. These silicates were likely formed in the stellar outflow from the progenitor system during the asymptotic giant branch stage of evolution, and imply an oxygen-rich chemistry. In addition to silicate dust, a second component, possibly carbonaceous dust, is necessary to account for the short-wavelength Infrared Spectrograph and Infrared Array Camera data. This could imply a mixed chemistry in the atmosphere of the progenitor system. However, non-spherical metallic iron inclusions within silicate grains provide an alternative solution. Models of collisionally heated dust emission from fast shocks (>1000 km s{sup -1}) propagating into the CSM can reproduce the majority of the emission associated with non-radiative filaments, where dust temperatures are {approx}80-100 K, but fail to account for the highest temperatures detected, in excess of 150 K. We find that slower shocks (a few hundred km s{sup -1}) into moderate density material (n{sub 0} {approx} 50-250 cm{sup -3}) are the only viable source of heating for this hottest dust. We confirm the finding of an overall density gradient, with densities in the north being an order of magnitude greater than those in the south.

79 ASTRONOMY AND ASTROPHYSICS↗

VAPORIZATION OF THE EARTH: APPLICATION TO EXOPLANET ATMOSPHERES

Currently, there are about three dozen known super-Earths (M < 10 M{sub Circled-Plus }), of which eight are transiting planets suitable for atmospheric follow-up observations. Some of the planets are exposed to extreme temperatures as they orbit close to their host stars, e.g., CoRot-7b, and all of these planets have equilibrium temperatures significantly hotter than the Earth. Such planets can develop atmospheres through (partial) vaporization of their crustal and/or mantle silicates. We investigated the chemical equilibrium composition of such heated systems from 500 to 4000 K and total pressures from 10{sup -6} to 10{sup +2} bars. The major gases are H{sub 2}O and CO{sub 2} over broad temperature and pressure ranges, and Na, K, O{sub 2}, SiO, and O at high temperatures and low pressures. We discuss the differences in atmospheric composition arising from vaporization of SiO{sub 2}-rich (i.e., felsic) silicates (like Earth's continental crust) and MgO-, FeO-rich (i.e., mafic) silicates (like the bulk silicate Earth). The computational results will be useful in planning spectroscopic studies of the atmospheres of Earth-like exoplanets.

79 ASTRONOMY AND ASTROPHYSICS↗

H{sub 2} formation in diffuse clouds: A new kinetic Monte Carlo study

We used the continuous-time random-walk Monte Carlo technique to study anew the formation of H{sub 2} on the surfaces of interstellar dust grains in diffuse interstellar clouds. For our study, we considered three different grain materials, olivine (a polycrystalline silicate), amorphous silicate, and amorphous carbon, as well as a grain temperature that depends on granular size. For some runs, we included temperature fluctuations. Four different granular surfaces were used, one 'flat' with one type of binding site due to physisorption, one 'rough' with five different types of physisorption binding sites due to lateral forces, and two with sites for chemisorption, one in which chemisorption sites are entered through precursor physisorption sites, and one in which chemisorption is direct but occurs with a barrier for the adsorption of the first hydrogen atom. We found that on flat and rough olivine surfaces, molecular hydrogen is formed at low efficiencies, with smaller grains contributing very little despite their large numbers due to high temperatures. For flat amorphous carbon and amorphous silicate surfaces, the efficiency increases, reaching unity for the largest grains. For models with barrierless chemisorption, the efficiency of formation of H{sub 2} is near unity at all grain sizes considered, while for direct chemisorption via a barrier, we found efficiencies of 0.13-0.6 depending upon the barrier, but independent of grain size. Treating the flat olivine and amorphous silicate surfaces with temperature fluctuations increases the efficiency of H{sub 2} formation.

79 ASTRONOMY AND ASTROPHYSICS↗

C/O abundance ratios, iron depletions, and infrared dust features in galactic planetary nebulae

We study the dust present in 56 Galactic planetary nebulae (PNe) through their iron depletion factors, their C/O abundance ratios (in 51 objects), and the dust features that appear in their infrared spectra (for 33 objects). Our sample objects have deep optical spectra of good quality, and most of them also have ultraviolet observations. We use these observations to derive the iron abundances and the C/O abundance ratios in a homogeneous way for all the objects. We compile detections of infrared dust features from the literature and we analyze the available Spitzer/IRS spectra. Most of the PNe have C/O ratios below one and show crystalline silicates in their infrared spectra. The PNe with silicates have C/O <1, with the exception of Cn 1-5. Most of the PNe with dust features related to C-rich environments (SiC or the 30 μm feature usually associated to MgS) have C/O ≳ 0.8. Polycyclic aromatic hydrocarbons are detected over the full range of C/O values, including 6 objects that also show silicates. Iron abundances are low in all the objects, implying that more than 90% of their iron atoms are deposited into dust grains. The range of iron depletions in the sample covers about two orders of magnitude, and we find that the highest depletion factors are found in C-rich objects with SiC or the 30 μm feature in their infrared spectra, whereas some of the O-rich objects with silicates show the lowest depletion factors.

79 ASTRONOMY AND ASTROPHYSICS↗