Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SEMICONDUCTOR DEVICE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Design optimization of semiconductor piezoresistors with Schottky diode contacts

A modeling theory is developed to predict the performance of piezoresistors which incorporate Schottky diode electrical contacts. This new theory allows the design of high performance gauges which can be fabricated using NonLithographically-Based Microfabrication (NLBM) techniques. These semiconductor piezoresistors can be designed in customizable sizes and fabricated in parallel in order to integrate position sensing into MEMS flexural positioners. Customizable nanopositioning platforms will enable advances in a range of nano-scale fabrication and metrology applications. A semiconductor piezoresistor with Schottky diode contacts was fabricated and attached to a titanium flexure. This device is shown to match predicted electrical performance within about 8% and to show a gauge factor of 116, within 2% of the predicted value. Performance limits for Schottky diode semiconductor piezoresistors are identified to be about 127dB full noise dynamic range for a quarter bridge over a 10kHz sensor bandwidth on a 600µm width titanium flexure, making them ideal for sensing on meso-/micro-scale flexural positioners. Methods of reaching these performance bound are suggested and their impact on the sensor dynamic range are studied.

42 ENGINEERING↗
DOE OSTI2022

Inelastic phonon transport across atomically sharp metal/semiconductor interfaces

Understanding thermal transport across metal/semiconductor interfaces is crucial for the heat dissipation of electronics. The dominant heat carriers in non-metals, phonons, are thought to transport elastically across most interfaces, except for a few extreme cases where the two materials that formed the interface are highly dissimilar with a large difference in Debye temperature. In this work, we show that even for two materials with similar Debye temperatures (Al/Si, Al/GaN), a substantial portion of phonons will transport inelastically across their interfaces at high temperatures, significantly enhancing interface thermal conductance. Moreover, we find that interface sharpness strongly affects phonon transport process. For atomically sharp interfaces, phonons are allowed to transport inelastically and interface thermal conductance linearly increases at high temperatures. With a diffuse interface, inelastic phonon transport diminishes. Our results provide new insights on phonon transport across interfaces and open up opportunities for engineering interface thermal conductance specifically for materials of relevance to microelectronics.

42 ENGINEERING↗
DOE OSTI2024

Tunable exciton valley-pseudospin orders in moiré superlattices

Excitons in two-dimensional (2D) semiconductors have offered an attractive platform for optoelectronic and valleytronic devices. Further realizations of correlated phases of excitons promise device concepts not possible in the single particle picture. Here we report tunable exciton “spin” orders in WSe 2 /WS 2 moiré superlattices. We find evidence of an in-plane (xy) order of exciton “spin”—here, valley pseudospin—around exciton filling v ex = 1, which strongly suppresses the out-of-plane “spin” polarization. Upon increasing v ex or applying a small magnetic field of ~10 mT, it transitions into an out-of-plane ferromagnetic (FM-z) spin order that spontaneously enhances the “spin” polarization, i.e., the circular helicity of emission light is higher than the excitation. The phase diagram is qualitatively captured by a spin-1/2 Bose–Hubbard model and is distinct from the fermion case. Our study paves the way for engineering exotic phases of matter from correlated spinor bosons, opening the door to a host of unconventional quantum devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Trapping light in air with membrane metasurfaces for vibrational strong coupling

Optical metasurfaces can manipulate electromagnetic waves in unprecedented ways at ultra-thin engineered interfaces. Specifically, in the mid-infrared (mid-IR) region, metasurfaces have enabled numerous biochemical sensing, spectroscopy, and vibrational strong coupling (VSC) applications via enhanced light-matter interactions in resonant cavities. However, mid-IR metasurfaces are usually fabricated on solid supporting substrates, which degrade resonance quality factors (Q) and hinder efficient sample access to the near-field electromagnetic hotspots. Besides, typical IR-transparent substrate materials with low refractive indices, such as CaF 2 , NaCl, KBr, and ZnSe, are usually either water-soluble, expensive, or not compatible with low-cost mass manufacturing processes. Here, we present novel free-standing Si-membrane mid-IR metasurfaces with strong light-trapping capabilities in accessible air voids. We employ the Brillouin zone folding technique to excite tunable, high-Q quasi-bound states in the continuum (qBIC) resonances with our highest measured Q-factor of 722. Leveraging the strong field localizations in accessible air cavities, we demonstrate VSC with multiple quantities of PMMA molecules and the qBIC modes at various detuning frequencies. Our new approach of fabricating mid-IR metasurfaces into semiconductor membranes enables scalable manufacturing of mid-IR photonic devices and provides exciting opportunities for quantum-coherent light-matter interactions, biochemical sensing, and polaritonic chemistry. The authors introduce a mid-IR metasurface fabricated by decorating a free-standing Si-membrane with air holes. The enhanced light-matter interactions in such air cavities enable vibrational strong coupling and advanced biochemical sensing.

infrared spectroscopy↗
DOE OSTI2017

Designing functionality in perovskite thin films using ion implantation techniques: Assessment and insights from first-principles calculations

Ion implantation has been widely used in the semiconductor industry for decades to selectively control electron/hole doping for device applications. Recently, experimental studies on ion implantation into more structurally and electronically complex materials have been undertaken in which defect generation has been used to control a variety of functional phenomena. Of particular interest, are recent findings demonstrating that low doses of low energy helium ions into single crystal films can be used to tailor the structural properties. These initial experimental studies have shown that crystal symmetry can be continuously controlled by applying increasingly large doses of He ions into a crystal. The observed changes in lattice structure were then observed to correlate with functional changes, such as metal-insulator transition temperature2 and optical bandgap3. In these preliminary experimental studies, changes to lattice expansion was proposed to be the direct result of chemical pressure originating predominantly from the implanted He applying chemical pressure at interstitial sites. However, the influence of possible secondary knock-on damage arising from the He atoms transferring energy to the lattice through nuclear-nuclear collision with the crystal lattice remains largely unaddressed. In this work, we focus on a SrRuO3 model system to provide a comprehensive examination of the impact of common defects on structural and electronic properties, obtain calculated defect formation energies, and define defect migration barriers. Our model indicates that, while interstitial He can modify the crystal properties, a dose significantly larger than those reported in experimental studies would be required. The true origin of the observed structural changes is likely the result of a combination of secondary defects created during He implantation. Of particular importance, we observe that different defect types can generate greatly varied local electronic structures and that the formation energies and migration energy barriers vary by defect type. Thus, we may have identified a new method of selectively inducing controlled defect complexes into single crystal materials. Development of this approach would have a broad impact on both our ability to probe specific defect contributions in fundamental studies and allow a new level of control over functional properties driven by specific defect complexes.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Optimizing performance and yield of vertical GaN diodes using wafer scale optical techniques

Abstract To improve the manufacturing of vertical GaN devices for power electronics applications, the effects of defects in GaN substrates need to be better understood. Many non-destructive techniques including photoluminescence, Raman spectroscopy and optical profilometry, can be used to detect defects in the substrate and epitaxial layers. Raman spectroscopy was used to identify points of high crystal stress and non-uniform conductivity in a substrate, while optical profilometry was used to identify bumps and pits in a substrate which could cause catastrophic device failures. The effect of the defects was studied using vertical P-i-N diodes with a single zone junction termination extention (JTE) edge termination and isolation, which were formed via nitrogen implantation. Diodes were fabricated on and off of sample abnormalities to study their effects. From electrical measurements, it was discovered that the devices could consistently block voltages over 1000 V (near the theoretical value of the epitaxial layer design), and the forward bias behavior could consistently produce on-resistance below 2 mΩ cm 2 , which is an excellent value considering DC biasing was used and no substrate thinning was performed. It was found that high crystal stress increased the probability of device failure from 6 to 20%, while an inhomogeneous carrier concentration had little effect on reverse bias behavior, and slightly (~ 3%) increased the on-resistance (R on ). Optical profilometry was able to detect regions of high surface roughness, bumps, and pits; in which, the majority of the defects detected were benign. However a large bump in the termination region of the JTE or a deep pit can induce a low voltage catastrophic failure, and increased crystal stress detected by the Raman correlated to the optical profilometry with associated surface topography.

42 ENGINEERING↗
DOE OSTI2025

Ultra broadband yellow emitting lead-free metal halide perovskite like compounds with near-unity emission quantum yields

Metal halide perovskites (MHPs) are interesting semiconductor materials with potential for use in optoelectronic and photonic devices. Their practical applications are hindered due to the negative environmental effects of the lead ions (Pb 2+ ) used in these materials and stability issues. Exploring new environmentally friendly materials with lead-free metal halides and investigating the factors affecting their optical properties and stability are essential. The broadband emission and high (near-unity; ~100%) photoluminescence quantum yield (PLQY) of low-dimensional copper(I) halides make them great candidates for the next-generation luminescent materials for lighting applications. Here, a Cu(I) iodide based organic/inorganic hybrid halide (benzo-15-crown-5) 2 NaH 2 OCu 4 I 6 (BCNCI) with a zero-dimensional (0D) cluster was prepared. The BCNCI has a broadband yellow emission peaked at 548 nm with a near-unity PLQY (99.1%) upon excitation at 365 nm (ultraviolet). Upon excitation at 450 nm (blue), a high PLQY of 82% was also achieved. The luminescence mechanism was discussed in detail. Interestingly, BCNCI exhibits ultra-broad band excitation in the 300–500 nm range, which matches commercially available UV and blue-emitting chips. Compared to commercial YAG:Ce 3+ phosphors, the emission spectrum is sufficiently broad to cover the visible spectral region. This work illustrates a good example of developing an environmentally friendly white light source, using high-performance copper halides with adequate broadband excitation and emission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Subcutaneous oxidation of In{sub 0.53}Ga{sub 0.47}As(100) through ultra-thin atomic layer deposited Al{sub 2}O{sub 3}

Stability of oxide/semiconductor interfaces during device fabrication is critically important, particularly for adoption of new semiconductor channel materials, such as III-V compounds. Unintentional oxidation of an underlying In{sub 0.53}Ga{sub 0.47}As(100) surface through atomic layer deposited (ALD) Al{sub 2}O{sub 3} layers of varying thickness is investigated. Oxygen annealing of 1 ∼ 2 nm thickness Al{sub 2}O{sub 3} layers at 300 °C or higher and large-dose water vapor exposure during the ALD-Al{sub 2}O{sub 3} process at 300 °C produces InGaAs surface oxidation. This subcutaneous oxidation of InGaAs increases the Al{sub 2}O{sub 3}/InGaAs interface defect density as observed in suppressed band-edge photoluminescence and in capacitance-voltage analysis, possibly by creating As dangling bonds at the InGaAs surface.

36 MATERIALS SCIENCE↗
DOE OSTI2014

High Mg-content wurtzite MgZnO alloys and their application in deep-ultraviolet light-emitters pumped by accelerated electrons

High Mg-content single-phase wurtzite MgZnO alloys with a bandgap of 4.35 eV have been obtained on sapphire substrate by introducing a composition-gradient Mg{sub x}Zn{sub 1−x}O buffer layer. By employing the accelerated electrons obtained in a solid-state structure as an excitation source, an emission at around 285 nm, which is originated from the near-band-edge emission of the Mg{sub 0.51}Zn{sub 0.49}O active layer, has been observed. The results reported in this paper may provide a promising route to high performance deep-ultraviolet light-emitting devices by bypassing the challenging doping issues of wide bandgap semiconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Micro-contacting of single and periodically arrayed columnar silicon structures by focused ion beam techniques

Micron-sized, periodic crystalline Silicon columns on glass substrate were electrically contacted with a transparent conductive oxide front contact and a focused ion beam processed local back contact. Individual column contacts as well as arrays of >100 contacted columns were processed. Current-voltage characteristics of the devices were determined. By comparison with characteristics obtained from adapted device simulation, the absorber defect density was reconstructed. The contacting scheme allows the fabrication of testing devices in order to evaluate the electronic potential of promising semiconductor microstructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Self-consistent modelling of electrochemical strain microscopy in mixed ionic-electronic conductors: Nonlinear and dynamic regimes

The frequency dependent Electrochemical Strain Microscopy (ESM) response of mixed ionic-electronic conductors is analyzed within the framework of Fermi-Dirac statistics and the Vegard law, accounting for steric effects from mobile donors. The emergence of dynamic charge waves and nonlinear deformation of the surface in response to bias applied to the tip-surface junction is numerically explored. The 2D maps of the strain and concentration distributions across the mixed ionic-electronic conductor and bias-induced surface displacements are calculated. The obtained numerical results can be applied to quantify the ESM response of Li-based solid electrolytes, materials with resistive switching, and electroactive ferroelectric polymers, which are of potential interest for flexible and high-density non-volatile memory devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Surface plasmon polariton excitation by electrostatic modulation and phase grating in indium-tin-oxide coated lithium niobate slabs

Excitation of surface plasmon polaritons (SPPs) in a non-metal system in visible regime is discussed. With the assistance of phase grating resulted from photorefractive effect and electrostatic modulation of ITO induced by strong photovoltaic effect in iron-doped LiNbO{sub 3}, phase matching condition could be satisfied for SPP excitation in this semiconductor/dielectric system. Both the phase grating instead of metal grating and electrostatic modulation of semiconductor could be used for the design of tunable plasmonic devices based on nonlinear photorefractive crystals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Coexistence of negative photoconductivity and hysteresis in semiconducting graphene

Solution-processed graphene quantum dots (GQDs) possess a moderate bandgap, which make them a promising candidate for optoelectronics devices. However, negative photoconductivity (NPC) and hysteresis that happen in the photoelectric conversion process could be harmful to performance of the GQDs-based devices. So far, their origins and relations have remained elusive. Here, we investigate experimentally the origins of the NPC and hysteresis in GQDs. By comparing the hysteresis and photoconductance of GQDs under different relative humidity conditions, we are able to demonstrate that NPC and hysteresis coexist in GQDs and both are attributed to the carrier trapping effect of surface adsorbed moisture. We also demonstrate that GQDs could exhibit positive photoconductivity with three-order-of-magnitude reduction of hysteresis after a drying process and a subsequent encapsulation. Considering the pervasive moisture adsorption, our results may pave the way for a commercialization of semiconducting graphene-based and diverse solution-based optoelectronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2017

Hybrid functional study of native point defects and impurities in ZnGeN 2

Using hybrid density functional theory, we explore the properties of native point defects and hydrogen and oxygen impurities in ZnGeN 2 , a wide-band-gap semiconductor that is promising for applications in electronic and optoelectronic devices. We find that cation antisites have the lowest formation energies amongst all of the native point defects for a wide range of chemical potential conditions. Yet, native point defects must not act as sources of doping. Unintentional n-type conductivity in ZnGeN 2 must be attributed to impurities: substitutional oxygen on a nitrogen site and interstitial hydrogen act as donors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Electronic, direct optical, and phonon-assisted optical properties of 4H Si from first principles

The cubic polytype of silicon (Si) is the most commercialized semiconductor material and finds applications in numerous electronic and optoelectronic devices, such as solar cells. However, recent reports on the synthesis of the hexagonal 4H Si polytype have attracted the attention of the scientific community to understand its functional properties. Here, we report the electronic, vibrational, and optical properties of the 4H Si polytype obtained with predictive first-principles calculations, with an emphasis of phonon-assisted absorption in the indirect regime. Compared to the cubic polytype, 4H Si shows a slightly narrower indirect gap by ∼0.05 eV. The calculated phonon-assisted optical spectra show that 4H Si exhibits a stronger absorption coefficient than cubic Si across the visible and IR spectral regions. We further evaluate the short-circuit current density of textured thin-films. We demonstrate that 4H Si can achieve the same short-circuit current density for a five times thinner film compared to the cubic polytype, which mainly resulted from absorption in the indirect gap regime. Our work demonstrates the advantages of 4H Si for thin-film silicon-based solar-cell applications.

Materials Science↗
DOE OSTI2025

Magnetic compressibility of layered ferromagnet under pressure

This study systematically investigates the magnetic properties of the layered ferromagnet MnPt 5 As under pressure through a combination of experimental measurements and theoretical simulations. MnPt 5 As exhibits a ferromagnetic transition at approximately 301 K. Neutron diffraction measurements under applied pressures up to ∼4.9 GPa were performed over a temperature range from 320 to 100 K to probe its magnetic behavior. The results confirm that the Mn atoms maintain a ferromagnetic order under applied pressures, consistent with the ambient-pressure findings. However, magnetic anisotropy is notably suppressed. To further elucidate the compressibility of magnetic anisotropy in MnPt 5 As, x-ray diffraction under pressure was conducted. The results reveal that the c-axis undergoes a greater and more rapid compression compared to the ab -plane, which may contribute to the observed suppression of Mn ferromagnetic ordering along the c -axis. Additionally, theoretical calculations indicate that magnetic ordering exhibits a similar pressure-induced trend under applied pressure, supporting the experimental observations. These findings offer insights into the pressure-dependent magnetic properties and anisotropy of MnPt 5 As, with potential implications for strain engineering in Mn-based magnetic devices.

Electronic band structure↗
DOE OSTI2021

Invited: Bambu: an Open-Source Research Framework for the High-Level Synthesis of Complex Applications

This paper presents the open-source High-Level Synthesis research framework Bambu. The framework provides an open-source starting point to experiment with new ideas across High-Level Synthesis, high-level verification and debugging, FPGA/ASIC design, design flow space exploration, and parallel hardware accelerator design. The tool accepts as input standard C/C++ specifications and compiler intermediate representations (IRs) coming from the well-known Clang/LLVM and GCC com- pilers. The broad spectrum and flexibility of input formats allow the electronic design automation (EDA) research community to explore and integrate new transformations and optimizations. The easily extendable modular framework already includes many op- timizations and HLS benchmarks. The integration with synthesis and verification backends (commercial and open-source) allows researchers to quickly test any new finding and easily obtain performance and resource usage metrics for a given application. Different FPGA devices are supported from several different vendors: AMD/XILINX, Intel/Altera, Lattice Semiconductor, and NanoXplore. Finally, integration with the OpenRoad open-source end-to-end silicon compiler perfectly fits with the recent push towards open-source EDA.

Ferrandi, Fabrizio↗
DOE OSTI2014

A method to estimate the fractional fat volume within a ROI of a breast biopsy for WAXS applications: Animal tissue evaluation

Purpose: To develop a method to estimate the mean fractional volume of fat (ν{sup ¯}{sub fat}) within a region of interest (ROI) of a tissue sample for wide-angle x-ray scatter (WAXS) applications. A scatter signal from the ROI was obtained and use of ν{sup ¯}{sub fat} in a WAXS fat subtraction model provided a way to estimate the differential linear scattering coefficient μ{sub s} of the remaining fatless tissue. Methods: The efficacy of the method was tested using animal tissue from a local butcher shop. Formalin fixed samples, 5 mm in diameter 4 mm thick, were prepared. The two main tissue types were fat and meat (fibrous). Pure as well as composite samples consisting of a mixture of the two tissue types were analyzed. For the latter samples, ν{sub fat} for the tissue columns of interest were extracted from corresponding pixels in CCD digital x-ray images using a calibration curve. The means ν{sup ¯}{sub fat} were then calculated for use in a WAXS fat subtraction model. For the WAXS measurements, the samples were interrogated with a 2.7 mm diameter 50 kV beam and the 6° scattered photons were detected with a CdTe detector subtending a solid angle of 7.75 × 10{sup −5} sr. Using the scatter spectrum, an estimate of the incident spectrum, and a scatter model, μ{sub s} was determined for the tissue in the ROI. For the composite samples, a WAXS fat subtraction model was used to estimate the μ{sub s} of the fibrous tissue in the ROI. This signal was compared to μ{sub s} of fibrous tissue obtained using a pure fibrous sample. Results: For chicken and beef composites, ν{sup ¯}{sub fat}=0.33±0.05 and 0.32 ± 0.05, respectively. The subtractions of these fat components from the WAXS composite signals provided estimates of μ{sub s} for chicken and beef fibrous tissue. The differences between the estimates and μ{sub s} of fibrous obtained with a pure sample were calculated as a function of the momentum transfer x. A t-test showed that the mean of the differences did not vary from zero in a statistically significant way thereby validating the methods. Conclusions: The methodology to estimate ν{sup ¯}{sub fat} in a ROI of a tissue sample via CCD x-ray imaging was quantitatively accurate. The WAXS fat subtraction model allowed μ{sub s} of fibrous tissue to be obtained from a ROI which had some fat. The fat estimation method coupled with the WAXS models can be used to compare μ{sub s} coefficients of fibroglandular and cancerous breast tissue.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗