Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RESOLUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

SPRUCE: Carbon Dioxide and Methane Soil Flux Measurements at High Temporal Resolution, Beginning in 2022

This data set contains high temporal resolution measurements of greenhouse gas flux (CO2 and CH4) from the SPRUCE (Spruce and Peatland Responses Under Changing Environments) experiment (Hanson et al. 2017) over the growing seasons in 2022 (30-minute resolution) and 2023 (15-minute resolution). Additional data will be appended to this dataset periodically until the close out of the SPRUCE experiment in 2025. This dataset contains two data files in comma-separate (*.csv) format. ABB GLA131-GGA CO2/CH4 gas analyzers, each paired with an Eosense eosMX multiplexer and 2 eosAC-LT automated flux chambers, were deployed from during the 2022 and 2023 growing seasons (2022-06-06 – 2023-10-26). Each SPRUCE experimental enclosure included two Eosense 50 cm diameter flux chambers with 40 cm tall stainless steel collars embedded approximately 15 cm into the peat soil, to measure soil gas flux of peatland ecosystem moss-shrub communities. . Measurements were taken for three minutes, alternating between the flux chambers, with each Eosense flux chamber sampling gas fluxes four times per hour in 2023 and twice per hour for 2022. In addition, time-series environmental data measured at the flux chamber are included: Photosynthetically active radiation (PAR), soil temperature, soil volumetric water content (at 10 cm depth), air temperature, soil temperature (0-200 cm depth), and volumetric water at 20 cm depth.

Spruce and Peatland Responses Under Changing Envir↗
DOE OSTI2017

Lipid and glycolipid isomer analyses using ultra-high resolution ion mobility spectrometry separations

Understanding the biological mechanisms related to lipids and glycolipids is challenging due to the vast number of possible isomers. Mass spectrometry (MS) measurements are currently the dominant approach for studying and providing detailed information on lipid and glycolipid structures. However, difficulties in distinguishing many structural isomers (e.g. distinct acyl chain positions, double bond locations, as well as glycan isomers) inhibit the understanding of their biological roles. Here we utilized ultra-high resolution ion mobility spectrometry (IMS) separations based upon the use of traveling waves in a serpentine long path length multi-pass Structures for Lossless Manipulations (SLIM) to enhance isomer resolution. The multi-pass arrangement allowed separations ranging from ~16 m (1 pass) to ~470 m (32 passes) to be investigated for the distinction of lipids and glycolipids with extremely small structural differences. Lastly, these ultra-high resolution SLIM IMS-MS analyses provide a foundation for exploring and better understanding isomer specific biological and disease processes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Microfabrication of a Chamber for High-Resolution, In Situ Imaging of the Whole Root for Plant–Microbe Interactions

Fabricated ecosystems (EcoFABs) offer an innovative approach to in situ examination of microbial establishment patterns around plant roots using nondestructive, high-resolution microscopy. Previously high-resolution imaging was challenging because the roots were not constrained to a fixed distance from the objective. Here, we describe a new ‘Imaging EcoFAB’ and the use of this device to image the entire root system of growing Brachypodium distachyon at high resolutions (20×, 40×) over a 3-week period. The device is capable of investigating root–microbe interactions of multimember communities. We examined nine strains of Pseudomonas simiae with different fluorescent constructs to B. distachyon and individual cells on root hairs were visible. Succession in the rhizosphere using two different strains of P. simiae was examined, where the second addition was shown to be able to establish in the root tissue. The device was suitable for imaging with different solid media at high magnification, allowing for the imaging of fungal establishment in the rhizosphere. Overall, the Imaging EcoFAB could improve our ability to investigate the spatiotemporal dynamics of the rhizosphere, including studies of fluorescently-tagged, multimember, synthetic communities.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Impact of Color Space and Color Resolution on Vehicle Recognition Models

In this study, we analyze both linear and nonlinear color mappings by training on versions of a curated dataset collected in a controlled campus environment. We experiment with color space and color resolution to assess model performance in vehicle recognition tasks. Color encodings can be designed in principle to highlight certain vehicle characteristics or compensate for lighting differences when assessing potential matches to previously encountered objects. The dataset used in this work includes imagery gathered under diverse environmental conditions, including daytime and nighttime lighting. Experimental results inform expectations for possible improvements with automatic color space selection through feature learning. Moreover, we find there is only a gradual decrease in model performance with degraded color resolution, which suggests the need for simplified data collection and processing. By focusing on the most critical features, we could see improved model generalization and robustness, as the model becomes less prone to overfitting to noise or irrelevant details in the data. Such a reduction in resolution will lower computational complexity, leading to quicker training and inference times.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Photon Detection System for DUNE Low-Energy Physics Study and the Demonstration of a Timing Resolution of a Few Nanoseconds Using ProtoDUNE-SP PDS

Photon detection systems (PDS) are an integral part of liquid-argon neutrino detectors. Besides providing the timing information for an event, which is necessary for reconstructing the drift coordinates of ionizing particle tracks, photon detectors can be effectively used for other purposes, including triggering events, background rejection, and calorimetric energy estimation. PDS in particular for the DUNE Far Detector Module 2 is designed to achieve a more extended optical coverage (→4 ) with new-generation large-size PD modules based on the ARAPUCA technology. This will provide enhanced opportunities for the study of low-energy neutrino physics using PDS. The ARAPUCA technology was extensively tested within the ProtoDUNE-SP detector operated at the CERN neutrino platform. Here, we present a study of the timing resolution of ARAPUCA detectors using light emitted from a sample of energetic cosmic ray muons traveling parallel to the PDS. An intrinsic timing resolution in the order of 3 ns is observed for the ARAPUCA detectors. The excellent timing resolution ability of PDS can be exploited for further enhancing physics studies using the DUNE far detectors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Estimation of Corn Latent Heat Flux from High Resolution Thermal Imagery

Crop evapotranspiration (ET), which is directly related to latent heat flux, is also a key indicator in determining the water status of crops. In order to estimate the latent heat flux, two-source energy balance (TSEB) models have been developed for thermal imagery from satellite platforms. However, because of the coarse resolution of thermal sensors on the satellite, distinguishing soil and vegetation is difficult which complicates the calculation process and introduces errors in latent heat estimates. In this research, high-resolution thermal datasets (0.05 m) and corresponding RGB datasets (0.03 m) were used for calculating crop latent heat flux using an adapted TSEB model. The RGB datasets were used for supervised classification of soil and vegetation, and the classification results were then used to filter the thermal mosaics to separate vegetation and soil temperatures. The vegetation temperature is used for calculating latent heat flux and the results are validated against the ground reference measurements of latent heat using a handheld porometer. The objective of this research is to introduce a workflow including an adapted TSEB model which is customized for high resolution thermal images from unmanned aircraft systems (UAS) to estimate the latent heat flux of row crops in agricultural fields. Nine dates of data collection in 2018 and 2020 have been evaluated and the root mean square error (RMSE) varies between 16 to 106 W/m2 depending on the days after planting (DAP) and the time of measurement for each day. The results indicate that the workflow introduced here is able to provide estimates of instantaneous latent heat flux (evapotranspiration) measurements for row crops in agricultural fields which will enable people to make reliable decisions related to irrigation scheduling.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

A Time-Gated, Time-Correlated Single-Photon-Counting Lidar to Observe Atmospheric Clouds at Submeter Resolution

Most lidars used for cloud observations have the range resolution of about 10 m, so they are incapable of resolving submeter-scale processes that are crucial to cloud evolution. This article describes a prototype of a ground-based, vertically pointing, time-gated, time-correlated single-photon-counting lidar (referred to as the T2 lidar) developed to explore atmospheric clouds at range resolution two orders of magnitude finer than traditional atmospheric lidars. The T2 lidar emits green-light pulses (532 nm) at a repetition rate of 20.6 kHz and a pulse width of ∼650 ps, which enables the observation of aerosol and cloud layers at heights from a few hundred meters to 7.28 km above the ground level at range resolution down to 10 cm. In addition, a digital delay pulse generator controls the detector to only receive photons for a short period after each laser pulse. This time-gated technique blocks photons arriving from regions outside the target zone, thus significantly reducing the noise level and allowing observation even inside clouds. Initial observations show that the T2 lidar can detect sharp cloud boundaries and fine structures near the cloud base. Such refined measurements of cloud structure could lead to an improved understanding of microphysical processes such as droplet activation, entrainment and mixing, and precipitation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Sparse and Random Sampling Techniques for High-Resolution, Full-Field, BSS-Based Structural Dynamics Identification from Video

Video-based techniques for identification of structural dynamics have the advantage that they are very inexpensive to deploy compared to conventional accelerometer or strain gauge techniques. When structural dynamics from video is accomplished using full-field, high-resolution analysis techniques utilizing algorithms on the pixel time series such as principal components analysis and solutions to blind source separation the added benefit of high-resolution, full-field modal identification is achieved. An important property of video of vibrating structures is that it is particularly sparse. Typically video of vibrating structures has a dimensionality consisting of many thousands or even millions of pixels and hundreds to thousands of frames. However the motion of the vibrating structure can be described using only a few mode shapes and their associated time series. As a result, emerging techniques for sparse and random sampling such as compressive sensing should be applicable to performing modal identification on video. This work presents how full-field, high-resolution, structural dynamics identification frameworks can be coupled with compressive sampling. The techniques described in this work are demonstrated to be able to recover mode shapes from experimental video of vibrating structures when 70% to 90% of the frames from a video captured in the conventional manner are removed.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

A VIPA Spectrograph with Ultra-high Resolution and Wavelength Calibration for Astronomical Applications

A prototype spectrograph using a Virtually Imaged Phased Array (VIPA) as the main dispersion element is presented, and its performance is fully examined in our laboratory. The single-mode, fiber-fed spectrograph with simultaneous wavelength calibration possesses a spectral resolution well in excess of R≈1.12×10{sup 6} while the size of the VIPA is several orders of magnitude smaller than that of a conventional échelle with comparable resolution. In laboratory tests, the VIPA-based instrument with a homemade Yb:fiber ring laser frequency comb demonstrates a mode-to-mode tracking stability of 41 cm s{sup −1} over a period of 6 hr. The VIPA spectrograph has promising applications in various astronomical observations in which ultra-high resolution and calibration precision are imperative, such as solar physics research, exoplanet searching with the radial velocity method, and O{sub 2} detection in the atmosphere of Earth-like planets. Ultimately, feasible optimizations for night-sky observations under seeing limited conditions are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Moderate-resolution K-band Spectroscopy of Substellar Companion κ Andromedae b

We present moderate-resolution (R ∼ 4000) K-band spectra of the “super-Jupiter,” κ Andromedae b. The data were taken with the OSIRIS integral field spectrograph at Keck Observatory. The spectra reveal resolved molecular lines from H{sub 2}O and CO, and are compared to a custom PHOENIX atmosphere model grid appropriate for young planetary-mass objects. We fit the data using a Markov chain Monte Carlo forward-modeling method. Using a combination of our moderate-resolution spectrum and low-resolution, broadband data from the literature, we derive an effective temperature of T {sub eff} = 1950–2150 K, a surface gravity of logg=3.5--4.5, and a metallicity of [M/H] = −0.2–0.0. These values are consistent with previous estimates from atmospheric modeling and the currently favored young age of the system (<50 Myr). We derive a C/O ratio of 0.70{sub −0.24}{sup +0.09} for the source, broadly consistent with the solar C/O ratio. This, coupled with the slightly subsolar metallicity, implies a composition consistent with that of the host star, and is suggestive of formation by a rapid process. The subsolar metallicity of κ Andromedae b is also consistent with predictions of formation via gravitational instability. Further constraints on formation of the companion will require measurement of the C/O ratio of κ Andromedae A. We also measure the radial velocity of κ Andromedae b for the first time, with a value of −1.4 ± 0.9 km s{sup −1} relative to the host star. We find that the derived radial velocity is consistent with the estimated high eccentricity of κ Andromedae b.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

The APOGEE Library of Infrared SSP Templates (A-LIST): High-resolution Simple Stellar Population Spectral Models in the H Band

Integrated light spectroscopy from galaxies can be used to study the stellar populations that cannot be resolved into individual stars. This analysis relies on stellar population synthesis (SPS) techniques to study the formation history and structure of galaxies. However, the spectral templates available for SPS are limited, especially in the near-infrared (near-IR). We present A-LIST (APOGEE Library of Infrared SSP Templates), a new set of high-resolution, near-IR SSP spectral templates spanning a wide range of ages (2–12 Gyr), metallicities ( − 2.2 < [M/H] < + 0.4) and α abundances ( − 0.2 < [α/M] < + 0.4). This set of SSP templates is the highest resolution (R ∼ 22, 500) available in the near-IR, and the first such based on an empirical stellar library. Our models are generated using spectra of ∼300,000 stars spread across the Milky Way, with a wide range of metallicities and abundances, from the APOGEE survey. We show that our model spectra provide accurate fits to M31 globular cluster spectra taken with APOGEE, with best-fit metallicities agreeing with those of previous estimates to within ∼0.1 dex. We also compare these model spectra to lower-resolution E-MILES models and demonstrate that we recover the ages of these models to within ∼1.5 Gyr. This library is available in https://github.com/aishashok/ALIST-library.

47 OTHER INSTRUMENTATION↗
DOE OSTI2017

Resolution Dependence of Magnetorotational Turbulence in the Isothermal Stratified Shearing Box

Magnetohydrodynamic turbulence driven by the magnetorotational instability can provide diffusive transport of angular momentum in astrophysical disks, and a widely studied computational model for this process is the ideal, stratified, isothermal shearing box. Here we report results of a convergence study of such boxes up to a resolution of N = 256 zones per scale height, performed on blue waters at NCSA with ramses-gpu. We find that the time and vertically integrated dimensionless shear stress α-bar ∼N{sup −1/3}, i.e., the shear stress is resolution dependent. We also find that the magnetic field correlation length decreases with resolution, λ∼N{sup −1/2}. This variation is strongest at the disk midplane. We show that our measurements of α-bar are consistent with earlier studies, and we discuss possible reasons for the lack of convergence.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

The Stars of the HETDEX Survey. I. Radial Velocities and Metal-poor Stars from Low-resolution Stellar Spectra

The Hobby–Eberly Telescope Dark Energy Experiment (HETDEX) is an unbiased, massively multiplexed spectroscopic survey, designed to measure the expansion history of the universe through low-resolution ( R ~ 750) spectra of Ly α emitters. In its search for these galaxies, HETDEX will also observe a few times 10 5 stars. In this paper, we present the first stellar value-added catalog within the internal second data release of the HETDEX Survey (HDR2). The new catalog contains 120,571 low-resolution spectra for 98,736 unique stars between 10 < G < 22 spread across the HETDEX footprint at relatively high ( b ~ 60°) Galactic latitudes. With these spectra, we measure radial velocities (RVs) for ~42,000 unique FGK-type stars in the catalog and show that the HETDEX spectra are sufficient to constrain these RVs with a 1 σ precision of 28.0 km s -1 and bias of 3.5 km s -1 with respect to the Large Sky Area Multi-Object Fibre Spectroscopic Telescope surveys and 1 σ precision of 27.5 km s -1 and bias of 14.0 km s -1 compared to the Sloan Extension for Galactic Understanding and Exploration survey. Since these RVs are for faint ( G ≥ 16) stars, they will be complementary to Gaia. Using t-Distributed Stochastic Neighbor Embedding (tSNE), we also demonstrate that the HETDEX spectra can be used to determine a star’s T eff , and log g and its [Fe/H]. With the tSNE projection of the FGK-type stars with HETDEX spectra we also identify 416 new candidate metal-poor ([Fe/H] < -1 dex) stars for future study. These encouraging results illustrate the utility of future low-resolution stellar spectroscopic surveys.

Astronomy & Astrophysics↗
DOE OSTI2022

Determination of Sodium Abundance Ratio from Low-resolution Stellar Spectra and Its Applications

We present a method to determine sodium abundance ratios ([Na/Fe]) using the Na i D doublet lines in low-resolution (R ~ 2000) stellar spectra. As stellar Na i D lines are blended with those produced by the interstellar medium, we developed a technique for removing the interstellar Na I D lines using the relationship between extinction, which is proportional to E(B – V), and the equivalent width of the interstellar Na i D absorption lines. When measuring [Na/Fe], we also considered corrections for nonlocal thermodynamic equilibrium (NLTE) effects. Comparisons with data from high-resolution spectroscopic surveys suggest that the expected precision of [Na/Fe] from low-resolution spectra is better than 0.3 dex for stars with [Fe/H] > –3.0. We also present a simple application employing the estimated [Na/Fe] values for a large number of stellar spectra from the Sloan Digital Sky Survey (SDSS). After classifying the SDSS stars into Na-normal, Na-high, and Na-extreme, we explore their relation to stars in Galactic globular clusters (GCs). We find that while the Na-high SDSS stars exhibit a similar metallicity distribution function (MDF) to that of the GCs, indicating that the majority of such stars may have originated from GC debris, the MDF of the Na-normal SDSS stars follows that of typical disk and halo stars. As there is a high fraction of carbon-enhanced metal-poor stars among the Na-extreme stars, they may have a non-GC origin, perhaps due to mass-transfer events from evolved binary companions.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Resolution Study of Thermonuclear Initiation in White Dwarf Tidal Disruption Events

Abstract We study the initiation of thermonuclear detonations in tidally disrupted white dwarf stars by intermediate-mass (10 3 M ⊙ ) black holes. The length scales required to resolve the initiation mechanism are not easily reached in 3D, so instead we have devised 2D proxy models, which, together with a logarithmic gridding strategy, can adequately capture detonation wave fronts as material undergoes simultaneous compression and stretching from tidal forces. We consider 0.15 and 0.6 M ⊙ white dwarf stars parameterized by tidal strengths in the range β = 4–23. High spatial resolution elucidates the manner and conditions leading to thermonuclear detonation, linking the initiation sequence to stellar composition and tidal strength. All of our models suffer sustained detonations triggered by a combination of adiabatic compression, mild thermonuclear preconditioning, and collisional heating, in degrees depending primarily on tidal strength. We find that many diagnostics, such as temperature, total released energy, and iron-group products, are fairly well converged (better than 10%) at resolutions below 10 km along the scale height of the orbital plane. The exceptions are intermediate-mass transients like calcium, which remain uncertain up to factors of 2, even at 1 km resolution.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Reconstructing Ly$α$ Fields from Low-resolution Hydrodynamical Simulations with Deep Learning

Hydrodynamical cosmological simulations are a powerful tool for accurately predicting the properties of the intergalactic medium (IGM) and for producing mock skies that can be compared against observational data. However, the need to resolve density fluctuation in the IGM puts a stringent requirement on the resolution of such simulations, which in turn limits the volumes that can be modeled, even on the most powerful supercomputers. In this work, we present a novel modeling method that combines physics-driven simulations with data-driven generative neural networks to produce outputs that are qualitatively and statistically close to the outputs of hydrodynamical simulations employing eight times higher resolution. We show that the Ly$α$ flux field, as well as the underlying hydrodynamic fields, have greatly improved statistical fidelity over a low-resolution simulation. Importantly, the design of our neural network allows for sampling multiple realizations from a given input, enabling us to quantify the model uncertainty. Using test data, we demonstrate that this model uncertainty correlates well with the true error of the Ly$α$ flux prediction. Ultimately, our approach allows for training on small simulation volumes and applying it to much larger ones, opening the door to producing accurate Ly$α$ mock skies in volumes of Hubble size, as will be probed with DESI and future spectroscopic sky surveys.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

The AGORA High-resolution Galaxy Simulations Comparison Project. V. Satellite Galaxy Populations in a Cosmological Zoom-in Simulation of a Milky Way–Mass Halo

We analyze and compare the satellite halo populations at z ~ 2 in the high-resolution cosmological zoom-in simulations of a 10 12 M ⊙ target halo (z = 0 mass) carried out on eight widely used astrophysical simulation codes (Art-I, Enzo, Ramses, Changa, Gadget-3, Gear, Arepo-t, and Gizmo) for the AGORA High-resolution Galaxy Simulations Comparison Project. We use slightly different redshift epochs near z = 2 for each code (hereafter "z ~ 2") at which the eight simulations are in the same stage in the target halo's merger history. After identifying the matched pairs of halos between the CosmoRun simulations and the DMO simulations, we discover that each CosmoRun halo tends to be less massive than its DMO counterpart. When we consider only the halos containing stellar particles at z ~ 2, the number of satellite galaxies is significantly fewer than that of dark matter halos in all participating AGORA simulations and is comparable to the number of present-day satellites near the Milky Way or M31. The so-called "missing satellite problem" is fully resolved across all participating codes simply by implementing the common baryonic physics adopted in AGORA and the stellar feedback prescription commonly used in each code, with sufficient numerical resolution (≲100 proper pc at z = 2). We also compare other properties such as the stellar mass–halo mass relation and the mass–metallicity relation. Our work highlights the value of comparison studies such as AGORA, where outstanding problems in galaxy formation theory are studied simultaneously on multiple numerical platforms.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

A Deep, High-angular-resolution 3D Dust Map of the Southern Galactic Plane

We present a deep, high-angular-resolution 3D dust map of the southern Galactic plane over 239° < l < 6° and ∣ b∣ < 10° built on photometry from the DECaPS2 survey, in combination with photometry from VISTA Variables in the Via Lactea, the Two Micron All Sky Survey, and “Unofficial” Wide-field Infrared Survey Explorer and parallaxes from Gaia Data Release 3 where available. To construct the map, we first infer the distance, extinction, and stellar types of over 700 million stars using the brutus stellar inference framework with a set of theoretical MESA Isochrone and Stellar Tracks (MIST) stellar models. Our resultant 3D dust map has an angular resolution of 1′ , roughly an order of magnitude finer than existing 3D dust maps and comparable to the angular resolution of the Herschel 2D dust emission maps. We detect complexes at the range of distances associated with the Sagittarius-Carina and Scutum-Centaurus arms in the fourth quadrant, as well as more distant structures out to a maximum reliable distance of d ≈ 10 kpc from the Sun. The map is sensitive up to a maximum extinction of roughly A V ≈ 12 mag. We publicly release both the stellar catalog and the 3D dust map, the latter of which can easily be queried via the Python package dustmaps. When combined with the existing Bayestar19 3D dust map of the northern sky, the DECaPS 3D dust map fills in the missing piece of the Galactic plane, enabling extinction corrections over the entire disk ∣b∣ < 10°. Our map serves as a pathfinder for the future of 3D dust mapping in the era of LSST and Roman, targeting regimes accessible with deep optical and near-infrared photometry but often inaccessible with Gaia.

Milky Way galaxy↗