Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “R MATRIX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,405 records · Page 78

Design of a LQR Controller of Reduced Inputs for Multiple Spacecraft Formation Flying

Regarding multiple spacecraft formation flying, the observation is made that control thrust need only be applied coplanar to the local horizon to achieve complete controllability of a two-satellite formation. Without the need for zenith-nadir (radial) thrust, simplifications and reduction of the weight of the propulsion system may be accomplished. This work focuses on the validation of this radial-excluding control system on its own merits, and in comparison to a related system which does provide thrust parallel to the orbital radius. Simulations are performed using commercial ODE solvers to propagate the Keplerian dynamics of a controlled satellite relative to an uncontrolled, leader satellite. The conclusion is drawn that, despite the exclusion of the radial thrust axis, the remaining control thrust available still provides enough control to design a gain matrix of adequate performance using linear-quadratic regulator (LQR) techniques.

Starin, Scott R.↗

C-Coupon Studies of SiC/SiC Composites: Microstructual Characterization - Part 2

A 'C-coupon' was used to measure the interlaminar tensile behavior of five different composite materials: Sylramic/MI (melt infiltration SiC matrix), ZMl/MI, Sylramic/S300, and ZMI and Hi-Nicalon with an S200 matrix at room temperature, 816 C, and 1204 C. Fracture behavior was characterized by field emission scanning electron microscopy, and observed cracking compared with events measured by modal acoustic emission. Both radial and matrix hoop cracking along the inner radius arising from hoop stresses were observed for all material types. In those composites in which the radial cracks were sufficiently wide to view the composite interior, fracture was observed to occur at the fiber BN or BN matrix interface.

Hurwitz, Frances I.↗

Left ventricular hypertrophy in ascending aortic stenosis mice: anoikis and the progression to early failure

BACKGROUND: To determine potential mechanisms of the transition from hypertrophy to very early failure, we examined apoptosis in a model of ascending aortic stenosis (AS) in male FVB/n mice. METHODS AND RESULTS: Compared with age-matched controls, 4-week and 7-week AS animals (n=12 to 16 per group) had increased ratios of left ventricular weight to body weight (4.7+/-0.7 versus 3.1+/-0.2 and 5. 7+/-0.4 versus 2.7+/-0.1 mg/g, respectively, P<0.05) with similar body weights. Myocyte width was also increased in 4-week and 7-week AS mice compared with controls (19.0+/-0.8 and 25.2+/-1.8 versus 14. 1+/-0.5 microm, respectively, P<0.01). By 7 weeks, AS myocytes displayed branching with distinct differences in intercalated disk size and staining for beta(1)-integrin on both cell surface and adjacent extracellular matrix. In vivo left ventricular systolic developed pressure per gram as well as endocardial fractional shortening were similar in 4-week AS and controls but depressed in 7-week AS mice. Myocyte apoptosis estimated by in situ nick end-labeling (TUNEL) was extremely rare in 4-week AS and control mice; however, a low prevalence of TUNEL-positive myocytes and DNA laddering were detected in 7-week AS mice. The specificity of TUNEL labeling was confirmed by in situ ligation of hairpin oligonucleotides. CONCLUSIONS: Our findings indicate that myocyte apoptosis develops during the transition from hypertrophy to early failure in mice with chronic biomechanical stress and support the hypothesis that the disruption of normal myocyte anchorage to adjacent extracellular matrix and cells, a process called anoikis, may signal apoptosis.

NASA Discipline Cardiopulmonary↗

Comparison of Resource Requirements for a Wind Tunnel Test Designed with Conventional vs. Modern Design of Experiments Methods

The factors that determine data volume requirements in a typical wind tunnel test are identified. It is suggested that productivity in wind tunnel testing can be enhanced by managing the inference error risk associated with evaluating residuals in a response surface modeling experiment. The relationship between minimum data volume requirements and the factors upon which they depend is described and certain simplifications to this relationship are realized when specific model adequacy criteria are adopted. The question of response model residual evaluation is treated and certain practical aspects of response surface modeling are considered, including inference subspace truncation. A wind tunnel test plan developed by using the Modern Design of Experiments illustrates the advantages of an early estimate of data volume requirements. Comparisons are made with a representative One Factor At a Time (OFAT) wind tunnel test matrix developed to evaluate a surface to air missile.

DeLoach, Richard↗

The Trash Compaction Processing System (TCPS) Technology Demonstrations Science Objectives and Requirement Definitions

Throughout the Next STEP Phase A and Phase B, the Trash Compaction Processing System (TCPS) is being developed for a technology demonstration (TD) on the International Space Station (ISS) in 2025. For Phase A, two contractors built proof-of-concept hardware. One contractor was chosen to build the TD hardware for Phase B. Both Phase A lessons learned and risk reduction activities at Ames Research Center (ARC) were used to write the TD science objectives, scope, and requirements. The work at ARC aims to retire technical risks and provide design data to TCPS developers and the ISS system integrators. This paper will summarize the lessons learned from the proof-of-concept hardware, the risk reduction activities, and how these lessons learned form the basis of the TD requirement matrix.

TCPS↗

The SINFONI Black Hole Survey: The black hole fundamental plane revisited and the paths of (co)evolution of supermassive black holes and bulges

We investigate the correlations between the black hole (BH) mass M{sub BH}, the velocity dispersion σ, the bulge mass M{sub Bu}, the bulge average spherical density ρ{sub h}, and its spherical half-mass radius r{sub h}, constructing a database of 97 galaxies (31 core ellipticals, 17 power-law ellipticals, 30 classical bulges, and 19 pseudobulges) by joining 72 galaxies from the literature to 25 galaxies observed during our recent SINFONI BH survey. For the first time we discuss the full error covariance matrix. We analyze the well-known M{sub BH}–σ and M{sub BH}–M{sub Bu} relations and establish the existence of statistically significant correlations between M{sub Bu} and r{sub h} and anticorrelations between M{sub Bu} and ρ{sub h}. We establish five significant bivariate correlations (M{sub BH}–σ–ρ{sub h}, M{sub BH}–σ–r{sub h}, M{sub BH}–M{sub Bu}–σ, M{sub BH}–M{sub Bu}–ρ{sub h}, M{sub BH}–M{sub Bu}–r{sub h}) that predict M{sub BH} of 77 core and power-law ellipticals and classical bulges with measured and intrinsic scatter as small as ≈0.36 dex and ≈0.33 dex, respectively, or 0.26 dex when the subsample of 45 galaxies defined by Kormendy and Ho is considered. In contrast, pseudobulges have systematically lower M{sub BH} but approach the predictions of all of the above relations at spherical densities ρ{sub h}⩾10{sup 10} M{sub ⊙} kpc{sup −3} or scale lengths r{sub h}⩽1 kpc. These findings fit in a scenario of coevolution of BH and classical-bulge masses, where core ellipticals are the product of dry mergers of power-law bulges and power-law ellipticals and bulges the result of (early) gas-rich mergers and of disk galaxies. In contrast, the (secular) growth of BHs is decoupled from the growth of their pseudobulge hosts, except when (gas) densities are high enough to trigger the feedback mechanism responsible for the existence of the correlations between M{sub BH} and galaxy structural parameters.

79 ASTRONOMY AND ASTROPHYSICS↗

Plasmon resonance in new AsSb–AlGaAs metal–semiconductor metamaterials

Optical extinction in a metal–semiconductor metamaterial based on a AlGaAs matrix, which contains random arrays of AsSb plasmon nanoinclusions, is studied. The metamaterial is grown by molecular beam epitaxy at a low temperature. A system of nanoinclusions of various sizes is formed by annealing at temperatures 400, 500, and 600°C. Investigation of the sample’s microstructure by transmission electron microscopy shows that the average size of nanoinclusions at the used annealing temperatures is 4–7, 5–8, and 6–9 nm, respectively. It is shown experimentally that AsSb nanoparticle arrays in the AlGaAs matrix cause the resonant absorption of light. It is established that the plasmon-resonance parameters found in the metamaterial are almost independent of the sizes of the AsSb nanoinclusions. The plasmon-resonance energy is (1.47 ± 0.01) eV, while its full width at half maximum is (0.19 ± 0.01) eV.

36 MATERIALS SCIENCE↗

Ballistic-diffusive approximation for the thermal dynamics of metallic nanoparticles in nanocomposite materials

Based on ballistic-diffusive approximation, a method is presented to model heat transfer in nanocomposites containing metal nanoparticles. This method provides analytical expression for the temperature dynamics of metallic nanoparticles embedded in a dielectric medium. In this study, nanoparticles are considered as spherical shells, so that Boltzmann equation is solved using ballistic-diffusive approximation to calculate the electron and lattice thermal dynamics in gold nanoparticles, while thermal exchange between the particles is taken into account. The model was used to investigate the influence of particle size and metal concentration of the medium on the electron and lattice thermal dynamics. It is shown that these two parameters are crucial in determining the nanocomposite thermal behavior. Our results showed that the heat transfer rate from nanoparticles to the matrix decreases as the nanoparticle size increases. On the other hand, increasing the metal concentration of the medium can also decrease the heat transfer rate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Calculation of Energy Eigenvalues and Eigenvectors for Three Body Molecules in Jacobi and Hyperspherical Coordinates

The jacobi coordinates is used to eliminate center of mass motion of three body systems. We write the results in hyperspherical coordinates and expand eigenfunction in a series of orthonormal complete set of Y{sub k{alpha}{sub i}} ({omega}{sub i}) in partition i of jacobi coordinates. The matrix elements of two body interaction potential in hyperspherical harmonic approach are determined exactly using computed analytical form of Raynal-Revai coefficients to change the base set of Y{sub k{alpha}{sub i}} ({omega}{sub i}) to other set such as Y{sub k{alpha}{sub i}} ({omega}{sub j}. The generalized Laguerre functions are used to change the second order coupled differential equations to set of non-differential matrix equation. This is solved to find energy eigenvalues and eigenfunctions of three body molecules. The obtained analytical results are in a very good agreement with used computational method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of the Tensor Force on the Charge Exchange Spin-Dipole Excitations of {sup 208}Pb

The charge exchange spin-dipole (SD) excitations of {sup 208}Pb are studied by using a fully self-consistent Skyrme Hartree-Fock plus random phase approximation formalism which includes the tensor interaction. It is found, for the first time, that the tensor correlations have a unique, multipole-dependent effect on the SD excitations; that is, they produce a softening of 1{sup -} states, but a hardening of 0{sup -} and 2{sup -} states. This paves the way to a clear assessment of the strength of the tensor terms. We compare our results with a recent measurement, showing that our choice of tensor terms improves the agreement with experiment. The robustness of our results is supported by the analytic form of the tensor matrix elements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Multifunctional Properties of Cyanate Ester Composites with SiO2 Coated Fe3O4 Fillers

SiO2 coated Fe3O4 submicrometer spherical particles (a conducting core/insulating shell configuration) are fabricated using a hydrothermal method and are loaded at 10 and 20 vol % into a bisphenol E cyanate ester matrix for synthesis of multifunctional composites. The dielectric constant of the resulting composites is found to be enhanced over a wide frequency and temperature range while the low dielectric loss tangent of the neat cyanate ester polymer is largely preserved up to 160 ?C due to the insulating SiO2 coating on individual conductive Fe3O4 submicrometer spheres. These composites also demonstrate high dielectric breakdown strengths at room temperature. Dynamic mechanical analysis indicates that the storage modulus of the composite with a 20 vol % filler loading is twice as high as that of neat resin, but the glass transition temperature considerably decreases with increasing filler content. Magnetic measurements reveal a large saturation magnetization and negligibly low coercivity and remanent magnetization in these composites.

36 MATERIALS SCIENCE↗

Effect of chemical and physical heterogeneities on colloid-facilitated cesium transport

A set of column experiments was conducted to investigate the chemical and physical heterogeneity effect on colloid facilitated transport under slow pore velocity conditions. Pore velocities were kept below 100 cm d-1 for all experiments. Glass beads were packed into columns establishing four different conditions: 1) homogeneous, 2) mixed physical heterogeneity, 3) sequentially layered physical heterogeneity, and 4) chemical heterogeneity. The homogeneous column was packed with glass beads (diameter 500-600 µm), and physical heterogeneities were created by sequential layering or mixing two sizes of glass bead (500-600 µm and 300-400 µm). A chemical heterogeneity was created using 25% of the glass beads coated with hydrophobic molecules (1H-1H-2H-2H-perfluorooctyltrichlorosilane) mixed with 75% pristine glass beads (all 500-600 µm). Input solution with 0.5 mM CsI and 50 mg L-1 colloids (1-µm diameter SiO2) was pulsed into columns under saturated conditions. The physical heterogeneity in the packed glass beads retarded the transport of colloids compared to homogeneous (R = 25.0), but showed only slight differences between sequentially layered (R = 60.7) and mixed heterogeneity(R = 62.4). The column with the chemical, hydrophobic/hydrophilic, heterogeneity removed most of the colloids from the input solution. All column conditions stripped Cs from colloids onto the column matrix of packed glass beads.

Colloid-facilitated transport, cesium, physical he↗

Wear resistance and friction reduction in acrylo nitrile butadiene rubber through hybrid combination of graphite flakes and nano tungsten disulphide

Friction and wear have considerable role in the life span of two interacting parts. Incorporation of nanofillers in polymers/elastomers matrix causes commendable changes in its tribologicalproperties. The main purpose of this work is to reduce the coefficient of friction and wear rate of Acrylo Nitrile Butadiene rubber (NBR). To achieve such objective traditionally well knownlubricants graphite(G), tungsten disulphide (WS{sub 2}) and there hybrid combination was incorporated in NBR matrix. Effect of applied load (force) and concentration of fillers on tribological properties of NBR had been studied. The filler incorporation enhanced the hardnessby 8%, showed resistance to hydraulic oil and aging effect also got improved significantly. A particular optimized concentration of NBR with hybrid combination of 2% WS{sub 2} and 4% Graphite showed minimum coefficient of friction as well as wear rate. A hypothesis could be attributed that similar lamellar structure of WS{sub 2} and Graphite along with formation of a stable nanoscale disulfide tribofilmcould result in lowering of friction. These substantially improved properties of nanoreinforced rubber materials would definitely pave promising path for plethora of potential technological applications.

36 MATERIALS SCIENCE↗

Technology Implementation Plan. Fully Ceramic Microencapsulated Fuel for Commercial Light Water Reactor Application

This report is an overview of the implementation plan for ORNL's fully ceramic microencapsulated (FCM) light water reactor fuel. The fully ceramic microencapsulated fuel consists of tristructural isotropic (TRISO) particles embedded inside a fully dense SiC matrix and is intended for utilization in commercial light water reactor application.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

π phase shift across stripes in a charge density wave system

Many strongly correlated materials are characterized by deeply intertwined charge and spin order. Besides their high superconducting transition temperatures, one of the central features of these complex patterns in cuprates is a phase shift which occurs across lines of decreased hole density. That is, when doped away from their antiferromagnetic phase, the additional charge is not distributed uniformly, but rather in “stripes.” The sublattices preferentially occupied by up and down spin are reversed across these stripes, a phenomenon referred to as a “π phase shift.” Many of the spin-charge patterns, including the π phase shift, are reproduced by density matrix renormalization group and quantum Monte Carlo calculations of simplified tight binding (repulsive Hubbard) models. In this paper we demonstrate that this sublattice reversal is generic by considering the corresponding phenomenon in the attractive Hubbard Hamiltonian, where a charge density wave phase forms at half filling. Here, we introduce charge stripes via an appropriate local chemical potential; measurements of charge correlation across the resulting lines of lowered density reveal a clear π phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Extracting the Spectral Function of the Cuprates By a Full Two-Dimensional Analysis: Angle-Resolved Photoemission Spectra of Bi(2)Sr(2)CuO(6)

Recently, angle-resolved photoemission spectroscopy (ARPES) has revealed a dispersion anomaly at high binding energy near 0.3--0.5eV in various families of the high-temperature superconductors. For further studies of this anomaly, we present a new two-dimensional fitting scheme and apply it to high-statistics ARPES data of the strongly overdoped Bi{sub 2}Sr{sub 2}CuO{sub 6} cuprate superconductor. The procedure allows us to extract the self-energy in an extended energy and momentum range. It is found that the spectral function of Bi{sub 2}Sr{sub 2}CuO{sub 6} can be parametrized using a small set of tight-binding parameters and a weakly momentum-dependent self-energy up to 0.7eV in binding energy and over the entire first Brillouin zone. Moreover, the analysis gives an estimate of the momentum dependence of the matrix element, a quantity, which is often neglected in ARPES analyses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tribology of Polymer Matrix Composites (PMCs) Fabricated by Additive Manufacturing (AM)

The integral process of depositing thin layers of material, one after another, until the designed component is created is collectively referred to as Additive Manufacturing (AM). Fused deposition process (FDP) is a type of AM where feedstock is extruded into filaments which then are deposited by 3D printing, and the solidification occurs during cooling of the melt. Currently, complex structures are being fabricated by commercial and open source desktop 3D printers. Recently, metal powder containing composite filaments based on polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS) have emerged, which could be utilized for multifunctional applications. For further deployment in the field, especially for aerospace and ground-based applications, it is critical to understand the tribological behavior of 3D printed materials. In this presentation, we will report the tribological behavior of different polymer matrix composites fabricated by fused deposition process. These results will be compared with the base polymer systems. During this study, the tribological behavior of all the samples will be evaluated with tab-on-disc method and compared for different metallic powder reinforcements.

additive manufacturing↗